Rhenium

For the Parliament album, see Rhenium (album).

Rhenium is a chemical element; it has symbol Re and atomic number 75. It is a silvery-gray, heavy, third-row transition metal in group 7 of the periodic table. With an estimated average concentration of 1 part per billion (ppb), rhenium is one of the rarest elements in the Earth's crust. It has one of the highest melting and boiling points of any element. It resembles manganese and technetium chemically and is mainly obtained as a by-product of the extraction and refinement of molybdenum and copper ores. It shows in its compounds a wide variety of oxidation states ranging from −1 to +7.

Rhenium, ₇₅Re

Rhenium
Pronunciation	/ˈriːniəm/ ​(REE-nee-əm)
Appearance	silvery-grayish
Standard atomic weight Ar°(Re)
	186.207±0.001[1] 186.21±0.01 (abridged)[2]
Rhenium in the periodic table
Hydrogen Helium Lithium Beryllium Boron Carbon Nitrogen Oxygen Fluorine Neon Sodium Magnesium Aluminium Silicon Phosphorus Sulfur Chlorine Argon Potassium Calcium Scandium Titanium Vanadium Chromium Manganese Iron Cobalt Nickel Copper Zinc Gallium Germanium Arsenic Selenium Bromine Krypton Rubidium Strontium Yttrium Zirconium Niobium Molybdenum Technetium Ruthenium Rhodium Palladium Silver Cadmium Indium Tin Antimony Tellurium Iodine Xenon Caesium Barium Lanthanum Cerium Praseodymium Neodymium Promethium Samarium Europium Gadolinium Terbium Dysprosium Holmium Erbium Thulium Ytterbium Lutetium Hafnium Tantalum Tungsten Rhenium Osmium Iridium Platinum Gold Mercury (element) Thallium Lead Bismuth Polonium Astatine Radon Francium Radium Actinium Thorium Protactinium Uranium Neptunium Plutonium Americium Curium Berkelium Californium Einsteinium Fermium Mendelevium Nobelium Lawrencium Rutherfordium Dubnium Seaborgium Bohrium Hassium Meitnerium Darmstadtium Roentgenium Copernicium Nihonium Flerovium Moscovium Livermorium Tennessine Oganesson Tc ↑ Re ↓ Bh tungsten ← rhenium → osmium
Atomic number (Z)	75
Group	group 7
Period	period 6
Block	d-block
Electron configuration	[Xe] 4f14 5d5 6s2
Electrons per shell	2, 8, 18, 32, 13, 2
Physical properties
Phase at STP	solid
Melting point	3459 K ​(3186 °C, ​5767[3] °F)
Boiling point	5903[3] K ​(5630 °C, ​10,170 °F)
Density (at 20° C)	21.010 g/cm3 [4]
when liquid (at m.p.)	18.9 g/cm3
Heat of fusion	60.43 kJ/mol
Heat of vaporization	704 kJ/mol
Molar heat capacity	25.48 J/(mol·K)
Vapor pressure P (Pa) 1 10 100 1 k 10 k 100 k at T (K) 3303 3614 4009 4500 5127 5954
Atomic properties
Oxidation states	common: +4 −3,[5] −1,[5] 0,? +1,[5], +2,[5] +3,[5] +5,[5] +6,[5] +7[5]
Electronegativity	Pauling scale: 1.9
Ionization energies	1st: 760 kJ/mol 2nd: 1260 kJ/mol 3rd: 2510 kJ/mol (more)
Atomic radius	empirical: 137 pm
Covalent radius	151±7 pm
Spectral lines of rhenium
Other properties
Natural occurrence	primordial
Crystal structure	​hexagonal close-packed (hcp) (hP2)
Lattice constants	a = 276.10 pm c = 445.84 pm (at 20 °C)[4]
Thermal expansion	5.61×10−6/K (at 20 °C)[a]
Thermal conductivity	48.0 W/(m⋅K)
Electrical resistivity	193 nΩ⋅m (at 20 °C)
Magnetic ordering	paramagnetic[6]
Molar magnetic susceptibility	+67.6×10−6 cm3/mol (293 K)[7]
Young's modulus	463 GPa
Shear modulus	178 GPa
Bulk modulus	370 GPa
Speed of sound thin rod	4700 m/s (at 20 °C)
Poisson ratio	0.30
Mohs hardness	7.0
Vickers hardness	1350–7850 MPa
Brinell hardness	1320–2500 MPa
CAS Number	7440-15-5
History
Naming	after the river Rhine (German: Rhein)
Discovery	Masataka Ogawa (1908)
First isolation	Masataka Ogawa (1919)
Named by	Walter Noddack, Ida Noddack, Otto Berg (1925)
Isotopes of rhenium v e
Main isotopes[8] Decay abun­dance half-life (t1/2) mode pro­duct 185Re 37.4% stable 186Re synth 3.7185 d β− 186Os ε 186W 186mRe synth 2×105 y IT 186Re β− 186Os 187Re 62.6% 4.12×1010 y β− 187Os
Category: Rhenium view talk edit | references

Rhenium was originally discovered in 1908 by Masataka Ogawa, but he mistakenly assigned it as element 43 rather than element 75 and named it nipponium. It was rediscovered in 1925 by Walter Noddack, Ida Tacke and Otto Berg,^[9] who gave it its present name. It was named after the river Rhine in Europe, from which the earliest samples had been obtained and worked commercially.^[10]

Nickel-based superalloys of rhenium are used in combustion chambers, turbine blades, and exhaust nozzles of jet engines. These alloys contain up to 6% rhenium, making jet engine construction the largest single use for the element. The second-most important use is as a catalyst: it is an excellent catalyst for hydrogenation and isomerization, and is used for example in catalytic reforming of naphtha for use in gasoline (rheniforming process). Because of the low availability relative to demand, rhenium is expensive, with price reaching an all-time high in 2008–09 of US$10,600 per kilogram (US$4,800 per pound). As of 2018, its price had dropped to US$2,844 per kilogram (US$1,290 per pound) due to increased recycling and a drop in demand for rhenium catalysts.^[11]

History

"Nipponium" redirects here. For element 113, see nihonium.

In 1908, Japanese chemist Masataka Ogawa announced that he had discovered the 43rd element and named it nipponium (Np) after Japan (Nippon in Japanese). In fact, he had found element 75 (rhenium) instead of element 43: both elements are in the same group of the periodic table.^[12][13] Ogawa's work was often incorrectly cited, because some of his key results were published only in Japanese; it is likely that his insistence on searching for element 43 prevented him from considering that he might have found element 75 instead. Just before Ogawa's death in 1930, Kenjiro Kimura analysed Ogawa's sample by X-ray spectroscopy at the Imperial University of Tokyo, and said to a friend that "it was beautiful rhenium indeed". He did not reveal this publicly, because under the Japanese university culture before World War II it was frowned upon to point out the mistakes of one's seniors, but the evidence became known to some Japanese news media regardless. As time passed with no repetitions of the experiments or new work on nipponium, Ogawa's claim faded away.^[13] The symbol Np was later used for the element neptunium, and the name "nihonium", also named after Japan, along with symbol Nh, was later used for element 113. Element 113 was also discovered by a team of Japanese scientists and was named in respectful homage to Ogawa's work.^[14] Today, Ogawa's claim is widely accepted as having been the discovery of element 75 in hindsight.^[13]

Rhenium (Latin: Rhenus meaning: "Rhine")^[15] received its current name when it was rediscovered by Walter Noddack, Ida Noddack, and Otto Berg in Germany. In 1925 they reported that they had detected the element in platinum ore and in the mineral columbite. They also found rhenium in gadolinite and molybdenite.^[16] In 1928 they were able to extract 1 g of the element by processing 660 kg of molybdenite.^[17] It was estimated in 1968 that 75% of the rhenium metal in the United States was used for research and the development of refractory metal alloys. It took several years from that point before the superalloys became widely used.^[18][19]

The original mischaracterization by Ogawa in 1908 and final work in 1925 makes rhenium perhaps the last stable element to be understood. Hafnium was discovered in 1923^[20] and all other new elements discovered since then, such as francium, are radioactive.^[21]

Characteristics

Rhenium is a silvery-white metal with one of the highest melting points of all elements, exceeded by only tungsten. (At standard pressure carbon sublimes rather than melts, though its sublimation point is comparable to the melting points of tungsten and rhenium.) It also has one of the highest boiling points of all elements, and the highest among stable elements. It is also one of the densest, exceeded only by platinum, iridium and osmium. Rhenium has a hexagonal close-packed crystal structure.

Its usual commercial form is a powder, but this element can be consolidated by pressing and sintering in a vacuum or hydrogen atmosphere. This procedure yields a compact solid having a density above 90% of the density of the metal. When annealed this metal is very ductile and can be bent, coiled, or rolled.^[22] Rhenium-molybdenum alloys are superconductive at 10 K; tungsten-rhenium alloys are also superconductive^[23] around 4–8 K, depending on the alloy. Rhenium metal superconducts at 1.697±0.006 K.^[24][25]

In bulk form and at room temperature and atmospheric pressure, the element resists alkalis, sulfuric acid, hydrochloric acid, nitric acid, and aqua regia. It will however, react with nitric acid upon heating.^[26]

Isotopes

Main article: Isotopes of rhenium

Rhenium has one stable isotope, rhenium-185, which nevertheless occurs in minority abundance, a situation found only in two other elements (indium and tellurium). Naturally occurring rhenium is only 37.4% ¹⁸⁵Re, and 62.6% ¹⁸⁷Re, which is unstable but has a very long half-life (~10¹⁰ years). A kilogram of natural rhenium emits 1.07 MBq of radiation due to the presence of this isotope. This lifetime can be greatly affected by the charge state of the rhenium atom.^[27][28] The beta decay of ¹⁸⁷Re is used for rhenium–osmium dating of ores. The available energy for this beta decay (2.6 keV) is the second lowest known among all radionuclides, only behind the decay from ¹¹⁵In to excited ¹¹⁵Sn* (0.147 keV).^[29] The isotope rhenium-186m is notable as being one of the longest lived metastable isotopes with a half-life of around 200,000 years. There are 33 other unstable isotopes that have been recognized, ranging from ¹⁶⁰Re to ¹⁹⁴Re, the longest-lived of which is ¹⁸³Re with a half-life of 70 days.^[30]

Compounds

Main article: Rhenium compounds

Rhenium compounds are known for all the oxidation states between −3 and +7 except −2. The oxidation states +7, +4, and +3 are the most common.^[31] Rhenium is most available commercially as salts of perrhenate, including sodium and ammonium perrhenates. These are white, water-soluble compounds.^[32] Tetrathioperrhenate anion [ReS₄]⁻ is possible.^[33]

Halides and oxyhalides

The most common rhenium chlorides are ReCl₆, ReCl₅, ReCl₄, and ReCl₃.^[34] The structures of these compounds often feature extensive Re-Re bonding, which is characteristic of this metal in oxidation states lower than VII. Salts of [Re₂Cl₈]²⁻ feature a quadruple metal-metal bond. Although the highest rhenium chloride features Re(VI), fluorine gives the d⁰ Re(VII) derivative rhenium heptafluoride. Bromides and iodides of rhenium are also well known, including rhenium pentabromide and rhenium tetraiodide.

Like tungsten and molybdenum, with which it shares chemical similarities, rhenium forms a variety of oxyhalides. The oxychlorides are most common, and include ReOCl₄, ReOCl₃.

Oxides and sulfides

Perrhenic acid (H₄Re₂O₉) adopts an unconventional structure.

The most common oxide is the volatile yellow Re₂O₇. The red rhenium trioxide ReO₃ adopts a perovskite-like structure. Other oxides include Re₂O₅, ReO₂, and Re₂O₃.^[34] The sulfides are ReS₂ and Re₂S₇. Perrhenate salts can be converted to tetrathioperrhenate by the action of ammonium hydrosulfide.^[35]

Other compounds

Rhenium diboride (ReB₂) is a hard compound having a hardness similar to that of tungsten carbide, silicon carbide, titanium diboride or zirconium diboride.^[36]

Organorhenium compounds

Main article: Organorhenium chemistry

Dirhenium decacarbonyl is the most common entry to organorhenium chemistry. Its reduction with sodium amalgam gives Na[Re(CO)₅] with rhenium in the formal oxidation state −1.^[37] Dirhenium decacarbonyl can be oxidised with bromine to bromopentacarbonylrhenium(I):^[38]

Re₂(CO)₁₀ + Br₂ → 2 Re(CO)₅Br

Reduction of this pentacarbonyl with zinc and acetic acid gives pentacarbonylhydridorhenium:^[39]

Re(CO)₅Br + Zn + HOAc → Re(CO)₅H + ZnBr(OAc)

Methylrhenium trioxide ("MTO"), CH₃ReO₃ is a volatile, colourless solid that has been used as a catalyst in some laboratory experiments. It can be prepared by many routes, a typical method is the reaction of Re₂O₇ and tetramethyltin:

Re₂O₇ + (CH₃)₄Sn → CH₃ReO₃ + (CH₃)₃SnOReO₃

Analogous alkyl and aryl derivatives are known. MTO catalyses for the oxidations with hydrogen peroxide. Terminal alkynes yield the corresponding acid or ester, internal alkynes yield diketones, and alkenes give epoxides. MTO also catalyses the conversion of aldehydes and diazoalkanes into an alkene.^[40]

Nonahydridorhenate

Structure of ReH²⁻
₉.

A distinctive derivative of rhenium is nonahydridorhenate, originally thought to be the rhenide anion, Re⁻, but actually containing the ReH²⁻
₉ anion in which the oxidation state of rhenium is +7.

Occurrence

Molybdenite

Rhenium is one of the rarest elements in Earth's crust with an average concentration of 1 ppb;^[34] other sources quote the number of 0.5 ppb making it the 77th most abundant element in Earth's crust.^[41] Rhenium is probably not found free in nature (its possible natural occurrence is uncertain), but occurs in amounts up to 0.2%^[34] in the mineral molybdenite (which is primarily molybdenum disulfide), the major commercial source, although single molybdenite samples with up to 1.88% have been found.^[42] Chile has the world's largest rhenium reserves, part of the copper ore deposits, and was the leading producer as of 2005.^[43] It was only recently (in 1994) that the first rhenium mineral was found and described, a rhenium sulfide mineral (ReS₂) condensing from a fumarole on Kudriavy volcano, Iturup island, in the Kuril Islands.^[44] Kudriavy discharges up to 20–60 kg rhenium per year mostly in the form of rhenium disulfide.^[45][46] Named rheniite, this rare mineral commands high prices among collectors.^[47]

Production

Ammonium perrhenate

Approximately 80% of rhenium is extracted from porphyry molybdenum deposits.^[48] Some ores contain 0.001% to 0.2% rhenium.^[34] Roasting the ore volatilizes rhenium oxides.^[42] Rhenium(VII) oxide and perrhenic acid readily dissolve in water; they are leached from flue dusts and gasses and extracted by precipitating with potassium or ammonium chloride as the perrhenate salts, and purified by recrystallization.^[34] Total world production is between 40 and 50 tons/year; the main producers are in Chile, the United States, Peru, and Poland.^[49] Recycling of used Pt-Re catalyst and special alloys allow the recovery of another 10 tons per year. Prices for the metal rose rapidly in early 2008, from $1000–$2000 per kg in 2003–2006 to over $10,000 in February 2008.^[50][51] The metal form is prepared by reducing ammonium perrhenate with hydrogen at high temperatures:^[32]

2 NH₄ReO₄ + 7 H₂ → 2 Re + 8 H₂O + 2 NH₃

There are technologies for the associated extraction of rhenium from productive solutions of underground leaching of uranium ores.^[52]

Applications

The Pratt & Whitney F-100 engine uses rhenium-containing second-generation superalloys

Rhenium is added to high-temperature superalloys that are used to make jet engine parts,^[53] using 70% of the worldwide rhenium production.^[54] Another major application is in platinum–rhenium catalysts, which are primarily used in making lead-free, high-octane gasoline.^[55]

Alloys

The nickel-based superalloys have improved creep strength with the addition of rhenium. The alloys normally contain 3% or 6% of rhenium.^[56] Second-generation alloys contain 3%; these alloys were used in the engines for the F-15 and F-16, whereas the newer single-crystal third-generation alloys contain 6% of rhenium; they are used in the F-22 and F-35 engines.^[55][57] Rhenium is also used in the superalloys, such as CMSX-4 (2nd gen) and CMSX-10 (3rd gen) that are used in industrial gas turbine engines like the GE 7FA. Rhenium can cause superalloys to become microstructurally unstable, forming undesirable topologically close packed (TCP) phases. In 4th- and 5th-generation superalloys, ruthenium is used to avoid this effect. Among others the new superalloys are EPM-102 (with 3% Ru) and TMS-162 (with 6% Ru),^[58] as well as TMS-138^[59] and TMS-174.^[60][61]

CFM International CFM56 jet engine with blades made with 3% rhenium

For 2006, the consumption is given as 28% for General Electric, 28% Rolls-Royce plc and 12% Pratt & Whitney, all for superalloys, whereas the use for catalysts only accounts for 14% and the remaining applications use 18%.^[54] In 2006, 77% of rhenium consumption in the United States was in alloys.^[55] The rising demand for military jet engines and the constant supply made it necessary to develop superalloys with a lower rhenium content. For example, the newer CFM International CFM56 high-pressure turbine (HPT) blades will use Rene N515 with a rhenium content of 1.5% instead of Rene N5 with 3%.^[62][63]

Rhenium improves the properties of tungsten. Tungsten-rhenium alloys are more ductile at low temperature, allowing them to be more easily machined. The high-temperature stability is also improved. The effect increases with the rhenium concentration, and therefore tungsten alloys are produced with up to 27% of Re, which is the solubility limit.^[64] Tungsten-rhenium wire was originally created in efforts to develop a wire that was more ductile after recrystallization. This allows the wire to meet specific performance objectives, including superior vibration resistance, improved ductility, and higher resistivity.^[65] One application for the tungsten-rhenium alloys is X-ray sources. The high melting point of both elements, together with their high atomic mass, makes them stable against the prolonged electron impact.^[66] Rhenium tungsten alloys are also applied as thermocouples to measure temperatures up to 2200 °C.^[67]

The high temperature stability, low vapor pressure, good wear resistance and ability to withstand arc corrosion of rhenium are useful in self-cleaning electrical contacts. In particular, the discharge that occurs during electrical switching oxidizes the contacts. However, rhenium oxide Re₂O₇ is volatile (sublimes at ~360 °C) and therefore is removed during the discharge.^[54]

Rhenium has a high melting point and a low vapor pressure similar to tantalum and tungsten. Therefore, rhenium filaments exhibit a higher stability if the filament is operated not in vacuum, but in oxygen-containing atmosphere.^[68] Those filaments are widely used in mass spectrometers, ion gauges^[69] and photoflash lamps in photography.^[70]

Catalysts

Rhenium in the form of rhenium-platinum alloy is used as catalyst for catalytic reforming, which is a chemical process to convert petroleum refinery naphthas with low octane ratings into high-octane liquid products. Worldwide, 30% of catalysts used for this process contain rhenium.^[71] The olefin metathesis is the other reaction for which rhenium is used as catalyst. Normally Re₂O₇ on alumina is used for this process.^[72] Rhenium catalysts are very resistant to chemical poisoning from nitrogen, sulfur and phosphorus, and so are used in certain kinds of hydrogenation reactions.^[22][73][74]

Other uses

The isotopes ¹⁸⁶Re and ¹⁸⁸Re are radioactive and are used for treatment of liver cancer. They both have similar penetration depth in tissue (5 mm for ¹⁸⁶Re and 11 mm for ¹⁸⁸Re), but ¹⁸⁶Re has the advantage of a longer half life (90 hours vs. 17 hours).^[75][76]

¹⁸⁸Re is also being used experimentally in a novel treatment of pancreatic cancer where it is delivered by means of the bacterium Listeria monocytogenes.^[77] The ¹⁸⁸Re isotope is also used for the rhenium-SCT (skin cancer therapy). The treatment uses the isotope's properties as a beta emitter for brachytherapy in the treatment of basal cell carcinoma and squamous cell carcinoma of the skin.^[78]

Related by periodic trends, rhenium has a similar chemistry to that of technetium; work done to label rhenium onto target compounds can often be translated to technetium. This is useful for radiopharmacy, where it is difficult to work with technetium – especially the technetium-99m isotope used in medicine – due to its expense and short half-life.^[75][79]

Rhenium is used in manufacturing high precision equipment like gyroscopes.^[80] Its high density, mechanical stability and corrosion resistance characteristics^[81] ensure the equipment's durability and precise performance in demanding conditions. Rhenium cathodes are also used for their stability and precision in spectral analysis.^[82]

Rhenium is used in aerospace, nuclear, and electronic industries, and it shows potential for application in medical instrumentation.^[83] In the rocket industry, it is used in engine components for booster rockets.^[84][85] Additionally, rhenium was employed in the SP-100 program due to its low-temperature ductility.^[86]

Rhenium's stiffness and high melting point makes it a common gasket material for high pressure experiments in diamond anvil cells.^[87][88]

Precautions

Very little is known about the toxicity of rhenium and its compounds because they are used in very small amounts. Soluble salts, such as the rhenium halides or perrhenates, could be hazardous due to elements other than rhenium or due to rhenium itself.^[89] Only a few compounds of rhenium have been tested for their acute toxicity; two examples are potassium perrhenate and rhenium trichloride, which were injected as a solution into rats. The perrhenate had an LD₅₀ value of 2800 mg/kg after seven days (this is very low toxicity, similar to that of table salt) and the rhenium trichloride showed LD₅₀ of 280 mg/kg.^[90]

Notes

1. The thermal expansion of Rh is anisotropic: the parameters for each crystal axis (at 20 °C) are α_a = 6.07×10⁻⁶/K, α_c = 4.69×10⁻⁶/K, and α_average = α_V/3 = 5.61×10⁻⁶/K.^[4]

References

1. "Standard Atomic Weights: Rhenium". CIAAW. 1973.
2. Prohaska, Thomas; Irrgeher, Johanna; Benefield, Jacqueline; Böhlke, John K.; Chesson, Lesley A.; Coplen, Tyler B.; Ding, Tiping; Dunn, Philip J. H.; Gröning, Manfred; Holden, Norman E.; Meijer, Harro A. J. (2022-05-04). "Standard atomic weights of the elements 2021 (IUPAC Technical Report)". Pure and Applied Chemistry. doi:10.1515/pac-2019-0603. ISSN 1365-3075.
3. Zhang, Yiming (2011-01-11). "Corrected Values for Boiling Points and Enthalpies of Vaporization of Elements in Handbooks". Journal of Chemical & Engineering Data. 56.
4. Arblaster, John W. (2018). Selected Values of the Crystallographic Properties of Elements. Materials Park, Ohio: ASM International. ISBN 978-1-62708-155-9.
5. Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 28. ISBN 978-0-08-037941-8.
6. Lide, D. R., ed. (2005). "Magnetic susceptibility of the elements and inorganic compounds". CRC Handbook of Chemistry and Physics (PDF) (86th ed.). Boca Raton (FL): CRC Press. ISBN 0-8493-0486-5.
7. Weast, Robert (1984). CRC, Handbook of Chemistry and Physics. Boca Raton, Florida: Chemical Rubber Company Publishing. pp. E110. ISBN 0-8493-0464-4.
8. Kondev, F. G.; Wang, M.; Huang, W. J.; Naimi, S.; Audi, G. (2021). "The NUBASE2020 evaluation of nuclear properties" (PDF). Chinese Physics C. 45 (3): 030001. doi:10.1088/1674-1137/abddae.
9. "Die Ekamangane". Naturwissenschaften (in German). 13 (26): 567–574. 1925-06-01. Bibcode:1925NW.....13..567.. doi:10.1007/BF01558746. ISSN 1432-1904. S2CID 32974087.
10. "From Hydrogen to Darmstadtium & More". American Chemical Society. 2003. p. 144.
11. "BASF Catalysts - Metal Prices". apps.catalysts.basf.com. Archived from the original on 2021-04-12. Retrieved 2018-04-11.
12. Yoshihara, H. K. (2004). "Discovery of a new element 'nipponiumʼ: re-evaluation of pioneering works of Masataka Ogawa and his son Eijiro Ogawa". Spectrochimica Acta Part B: Atomic Spectroscopy. 59 (8): 1305–1310. Bibcode:2004AcSpB..59.1305Y. doi:10.1016/j.sab.2003.12.027.
13. Hisamatsu, Yoji; Egashira, Kazuhiro; Maeno, Yoshiteru (2022). "Ogawa's nipponium and its re-assignment to rhenium". Foundations of Chemistry. 24: 15–57. doi:10.1007/s10698-021-09410-x.
14. Öhrström, Lars; Reedijk, Jan (28 November 2016). "Names and symbols of the elements with atomic numbers 113, 115, 117 and 118 (IUPAC Recommendations 2016)" (PDF). Pure Appl. Chem. 88 (12): 1225–1229. doi:10.1515/pac-2016-0501. hdl:1887/47427. S2CID 99429711. Retrieved 22 April 2017.
15. Tilgner, Hans Georg (2000). Forschen Suche und Sucht (in German). Books on Demand. ISBN 978-3-89811-272-7.
16. Noddack, W.; Tacke, I.; Berg, O. (1925). "Die Ekamangane". Naturwissenschaften. 13 (26): 567–574. Bibcode:1925NW.....13..567.. doi:10.1007/BF01558746. S2CID 32974087.
17. Noddack, W.; Noddack, I. (1929). "Die Herstellung von einem Gram Rhenium". Zeitschrift für Anorganische und Allgemeine Chemie (in German). 183 (1): 353–375. doi:10.1002/zaac.19291830126.
18. Committee On Technical Aspects Of Critical And Strategic Material, National Research Council (U.S.) (1968). Trends in usage of rhenium: Report. pp. 4–5.
19. Savitskiĭ, Evgeniĭ Mikhaĭlovich; Tulkina, Mariia Aronovna; Povarova, Kira Borisovna (1970). Rhenium alloys.
20. "Two Danes Discover New Element, Hafnium – Detect It by Means of Spectrum Analysis of Ore Containing Zirconium", The New York Times, January 20, 1923, p. 4
21. "Rhenium: Statistics and Information". Minerals Information. United States Geological Survey. 2011. Retrieved 2011-05-25.
22. Hammond, C. R. (2004). "The Elements". Handbook of Chemistry and Physics (81st ed.). CRC press. ISBN 978-0-8493-0485-9.
23. Neshpor, V. S.; Novikov, V. I.; Noskin, V. A.; Shalyt, S. S. (1968). "Superconductivity of Some Alloys of the Tungsten-rhenium-carbon System". Soviet Physics JETP. 27: 13. Bibcode:1968JETP...27...13N.
24. Haynes, William M., ed. (2011). CRC Handbook of Chemistry and Physics (92nd ed.). CRC Press. p. 12.60. ISBN 978-1439855119.
25. Daunt, J. G.; Lerner, E. "The Properties of Superconducting Mo-Re Alloys". Defense Technical Information Center. Archived from the original on 2017-02-06.
26. "Rhenium - A METAL WITHOUT WHICH THERE WOULdn't BE GASOLINE!". YouTube. July 2018.
27. Johnson, Bill (1993). "How to Change Nuclear Decay Rates". math.ucr.edu. Retrieved 2009-02-21.
28. Bosch, F.; Faestermann, T.; Friese, J.; et al. (1996). "Observation of bound-state β⁻ decay of fully ionized ¹⁸⁷Re: ¹⁸⁷Re-¹⁸⁷Os Cosmochronometry". Physical Review Letters. 77 (26): 5190–5193. Bibcode:1996PhRvL..77.5190B. doi:10.1103/PhysRevLett.77.5190. PMID 10062738.
29. Belli, P.; Bernabei, R.; Danevich, F. A.; Incicchitti, A.; Tretyak, V. I. (2019). "Experimental searches for rare alpha and beta decays". The European Physical Journal A. 55 (8). Springer Science and Business Media LLC: 140. arXiv:1908.11458. Bibcode:2019EPJA...55..140B. doi:10.1140/epja/i2019-12823-2. ISSN 1434-6001.
30. Audi, G.; Kondev, F. G.; Wang, M.; Huang, W. J.; Naimi, S. (2017). "The NUBASE2016 evaluation of nuclear properties" (PDF). Chinese Physics C. 41 (3): 030001. Bibcode:2017ChPhC..41c0001A. doi:10.1088/1674-1137/41/3/030001.
31. Housecroft, Catherine E.; Sharpe, Alan G. (2018). Inorganic Chemistry (5th ed.). Pearson Prentice-Hal. p. 829. ISBN 978-1292-13414-7.
32. Glemser, O. (1963) "Ammonium Perrhenate" in Handbook of Preparative Inorganic Chemistry, 2nd ed., G. Brauer (ed.), Academic Press, NY., Vol. 1, pp. 1476–85.
33. Goodman, JT; Rauchfuss, TB (2002). "Useful Reagents and Ligands". Inorganic Syntheses. Inorganic Syntheses. Vol. 33. pp. 107–110. doi:10.1002/0471224502.ch2. ISBN 0471208256.
34. Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
35. Goodman, J. T.; Rauchfuss, T. B. (2002). "Useful Reagents and Ligands". Inorganic Syntheses. Vol. 33. pp. 107–110. doi:10.1002/0471224502.ch2. ISBN 9780471208259.
36. Qin, Jiaqian; He, Duanwei; Wang, Jianghua; Fang, Leiming; Lei, Li; Li, Yongjun; Hu, Juan; Kou, Zili; Bi, Yan (2008). "Is Rhenium Diboride a Superhard Material?". Advanced Materials. 20 (24): 4780–4783. Bibcode:2008AdM....20.4780Q. doi:10.1002/adma.200801471. S2CID 98327405.
37. Breimair, Josef; Steimann, Manfred; Wagner, Barbara; Beck, Wolfgang (1990). "Nucleophile Addition von Carbonylmetallaten an kationische Alkin-Komplexe [CpL2M(η2-RC≡CR)]+ (M = Ru, Fe): μ-η1:η1-Alkin-verbrückte Komplexe". Chemische Berichte. 123: 7. doi:10.1002/cber.19901230103.
38. Schmidt, Steven P.; Trogler, William C.; Basolo, Fred (1990). "Pentacarbonylrhenium Halides". Inorganic Syntheses. Vol. 28. pp. 154–159. doi:10.1002/9780470132593.ch42. ISBN 978-0-470-13259-3.
39. Michael A. Urbancic; John R. Shapley (1990). "Pentacarbonylhydridorhenium". Inorganic Syntheses. Vol. 28. pp. 165–168. doi:10.1002/9780470132593.ch43. ISBN 978-0-470-13259-3.
40. Hudson, A. (2002) “Methyltrioxorhenium” in Encyclopedia of Reagents for Organic Synthesis. John Wiley & Sons: New York, ISBN 9780470842898, doi:10.1002/047084289X.
41. Emsley, John (2001). "Rhenium". Nature's Building Blocks: An A-Z Guide to the Elements. Oxford, England, UK: Oxford University Press. pp. 358–360. ISBN 978-0-19-850340-8.
42. Rouschias, George (1974). "Recent advances in the chemistry of rhenium". Chemical Reviews. 74 (5): 531. doi:10.1021/cr60291a002.
43. Anderson, Steve T. "2005 Minerals Yearbook: Chile" (PDF). United States Geological Survey. Retrieved 2008-10-26.
44. Korzhinsky, M. A.; Tkachenko, S. I.; Shmulovich, K. I.; Taran Y. A.; Steinberg, G. S. (2004-05-05). "Discovery of a pure rhenium mineral at Kudriavy volcano". Nature. 369 (6475): 51–52. Bibcode:1994Natur.369...51K. doi:10.1038/369051a0. S2CID 4344624.
45. Kremenetsky, A. A.; Chaplygin, I. V. (2010). "Concentration of rhenium and other rare metals in gases of the Kudryavy Volcano (Iturup Island, Kurile Islands)". Doklady Earth Sciences. 430 (1): 114. Bibcode:2010DokES.430..114K. doi:10.1134/S1028334X10010253. S2CID 140632604.
46. Tessalina, S.; Yudovskaya, M.; Chaplygin, I.; Birck, J.; Capmas, F. (2008). "Sources of unique rhenium enrichment in fumaroles and sulphides at Kudryavy volcano". Geochimica et Cosmochimica Acta. 72 (3): 889. Bibcode:2008GeCoA..72..889T. doi:10.1016/j.gca.2007.11.015.
47. "The Mineral Rheniite". Amethyst Galleries.
48. John, D. A.; Taylor, R. D. (2016). "Chapter 7: By-Products of Porphyry Copper and Molybdenum Deposits". In Philip L. Verplanck and Murray W. Hitzman (ed.). Rare earth and critical elements in ore deposits. Vol. 18. pp. 137–164. doi:10.5382/Rev.18.07.
49. Magyar, Michael J. (January 2012). "Rhenium" (PDF). Mineral Commodity Summaries. U.S. Geological Survey. Retrieved 2013-09-04.
50. "MinorMetal prices". minormetals.com. Archived from the original on 2008-05-15. Retrieved 2008-02-17.
51. Harvey, Jan (2008-07-10). "Analysis: Super hot metal rhenium may reach "platinum prices"". Reuters India. Archived from the original on 2009-01-11. Retrieved 2008-10-26.
52. Rudenko, A.A.; Troshkina, I.D.; Danileyko, V.V.; Barabanov, O.S.; Vatsura, F.Y. (2021). "Prospects for selective-and-advanced recovery of rhenium from pregnant solutions of in-situ leaching of uranium ores at Dobrovolnoye deposit". Gornye Nauki I Tekhnologii = Mining Science and Technology (Russia). 6 (3): 158–169. doi:10.17073/2500-0632-2021-3-158-169. S2CID 241476783.
53. "Rhenium (Re) | AMERICAN ELEMENTS ®". American Elements: The Materials Science Company. Retrieved 2024-05-14.
54. Naumov, A. V. (2007). "Rhythms of rhenium". Russian Journal of Non-Ferrous Metals. 48 (6): 418–423. doi:10.3103/S1067821207060089. S2CID 137550564.
55. Magyar, Michael J. (April 2011). "2009 Mineral Yearbook: Rhenium" (PDF). United States Geological Survey.
56. Bhadeshia, H. K. D. H. "Nickel Based Superalloys". University of Cambridge. Archived from the original on 2006-08-25. Retrieved 2008-10-17.
57. Cantor, B.; Grant, Patrick Assender Hazel (2001). Aerospace Materials: An Oxford-Kobe Materials Text. CRC Press. pp. 82–83. ISBN 978-0-7503-0742-0.
58. Bondarenko, Yu. A.; Kablov, E. N.; Surova, V. A.; Echin, A. B. (2006). "Effect of high-gradient directed crystallization on the structure and properties of rhenium-bearing single-crystal alloy". Metal Science and Heat Treatment. 48 (7–8): 360. Bibcode:2006MSHT...48..360B. doi:10.1007/s11041-006-0099-6. S2CID 136907279.
59. "Fourth generation nickel base single crystal superalloy" (PDF).
60. Koizumi, Yutaka; et al. "Development of a Next-Generation Ni-base Single Crystal Superalloy" (PDF). Proceedings of the International Gas Turbine Congress, Tokyo November 2–7, 2003.
61. Walston, S.; Cetel, A.; MacKay, R.; O'Hara, K.; Duhl, D.; Dreshfield, R. "Joint Development of a Fourth Generation Single Crystal Superalloy" (PDF). Archived from the original (PDF) on 2006-10-15.
62. Fink, Paul J.; Miller, Joshua L.; Konitzer, Douglas G. (2010). "Rhenium reduction—alloy design using an economically strategic element". JOM. 62 (1): 55. Bibcode:2010JOM....62a..55F. doi:10.1007/s11837-010-0012-z. S2CID 137007996.
63. Konitzer, Douglas G. (September 2010). "Design in an Era of Constrained Resources". Archived from the original on 2011-07-25. Retrieved 2010-10-12.
64. Lassner, Erik; Schubert, Wolf-Dieter (1999). Tungsten: properties, chemistry, technology of the element, alloys, and chemical compounds. Springer. p. 256. ISBN 978-0-306-45053-2.
65. "Tungsten-Rhenium - Union City Filament". Union City Filament. Retrieved 2017-04-05.
66. Cherry, Pam; Duxbury, Angela (1998). Practical radiotherapy physics and equipment. Cambridge University Press. p. 55. ISBN 978-1-900151-06-1.
67. Asamoto, R.; Novak, P. E. (1968). "Tungsten-Rhenium Thermocouples for Use at High Temperatures". Review of Scientific Instruments. 39 (8): 1233. Bibcode:1968RScI...39.1233A. doi:10.1063/1.1683642.
68. Blackburn, Paul E. (1966). "The Vapor Pressure of Rhenium". The Journal of Physical Chemistry. 70: 311–312. doi:10.1021/j100873a513.
69. Earle, G. D.; Medikonduri, R.; Rajagopal, N.; Narayanan, V.; Roddy, P. A. (2005). "Tungsten-Rhenium Filament Lifetime Variability in Low Pressure Oxygen Environments". IEEE Transactions on Plasma Science. 33 (5): 1736–1737. Bibcode:2005ITPS...33.1736E. doi:10.1109/TPS.2005.856413. S2CID 26162679.
70. Ede, Andrew (2006). The chemical element: a historical perspective. Greenwood Publishing Group. ISBN 978-0-313-33304-0.
71. Ryashentseva, Margarita A. (1998). "Rhenium-containing catalysts in reactions of organic compounds". Russian Chemical Reviews. 67 (2): 157–177. Bibcode:1998RuCRv..67..157R. doi:10.1070/RC1998v067n02ABEH000390. S2CID 250866233.
72. Mol, Johannes C. (1999). "Olefin metathesis over supported rhenium oxide catalysts". Catalysis Today. 51 (2): 289–299. doi:10.1016/S0920-5861(99)00051-6.
73. Angelidis, T. N.; Rosopoulou, D. Tzitzios V. (1999). "Selective Rhenium Recovery from Spent Reforming Catalysts". Ind. Eng. Chem. Res. 38 (5): 1830–1836. doi:10.1021/ie9806242.
74. Burch, Robert (1978). "The Oxidation State of Rhenium and Its Role in Platinum-Rhenium" (PDF). Platinum Metals Review. 22 (2): 57–60. doi:10.1595/003214078X2225760.
75. Dilworth, Jonathan R.; Parrott, Suzanne J. (1998). "The biomedical chemistry of technetium and rhenium". Chemical Society Reviews. 27: 43–55. doi:10.1039/a827043z.
76. "The Tungsten-188 and Rhenium-188 Generator Information". Oak Ridge National Laboratory. 2005. Archived from the original on 2008-01-09. Retrieved 2008-02-03.
77. Baker, Monya (22 April 2013). "Radioactive bacteria attack cancer". Nature. doi:10.1038/nature.2013.12841.
78. Cipriani, Cesidio; Desantis, Maria; Dahlhoff, Gerhard; Brown, Shannon D.; Wendler, Thomas; Olmeda, Mar; Pietsch, Gunilla; Eberlein, Bernadette (2020-07-22). "Personalized irradiation therapy for NMSC by rhenium-188 skin cancer therapy: a long-term retrospective study". Journal of Dermatological Treatment. 33 (2): 969–975. doi:10.1080/09546634.2020.1793890. ISSN 0954-6634. PMID 32648530.
79. Colton, R.; Peacock R. D. (1962). "An outline of technetium chemistry". Quarterly Reviews, Chemical Society. 16 (4): 299–315. doi:10.1039/QR9621600299.
80. Trento, Chin (Apr 12, 2024). "Six Strategic Metals Widely Used in the Military Industry". Stanford Standard Materials. Retrieved June 24, 2024.
81. "Rhenium". Encyclopedia Britannica. Mar 1, 2024. Retrieved June 24, 2024.
82. Azarov, V.; Gayasov, R. (2017). "Revised analysis of the fifth spectrum of rhenium (Re V)". Atomic Data and Nuclear Data Tables. 119: 175–192. doi:10.1016/j.adt.2017.01.003. Retrieved June 24, 2024.
83. "Rhenium Redefined". NASA. 2001. Retrieved Oct 28, 2024.
84. "Applications of Rhenium". Advance Refractory Metals. Retrieved Oct 28, 2024.
85. Harding, John (1988). Iridium-Coated Rhenium Thrusters by CVD (PDF) (Report). NASA. p. 2. Retrieved Oct 27, 2024.
86. Hagel, W.C.; Shields, J.A. (1984). Processing and Production of Molybdenum and Tungsten Alloys (PDF) (Report). US Department of Energy. p. 98. Retrieved Oct 28, 2024.
87. "Diamond Anvil Cell". Mineral Physics. Retrieved 2024-10-01.
88. Cheng, Nanfei; Chou, I-Ming; Wan, Ye; Wang, Ruoheng; Zhang, Haiyan; Chen, Ying (2023-08-20). "The intrinsic effects of using rhenium gaskets in hydrothermal diamond anvil cell experiments on background fluorescence, contamination, and redox control". Chemical Geology. 632: 121535. doi:10.1016/j.chemgeo.2023.121535. ISSN 0009-2541.
89. Emsley, J. (2003). "Rhenium". Nature's Building Blocks: An A-Z Guide to the Elements. Oxford, England, UK: Oxford University Press. pp. 358–361. ISBN 978-0-19-850340-8.
90. Haley, Thomas J.; Cartwright, Frank D. (1968). "Pharmacology and toxicology of potassium perrhenate and rhenium trichloride". Journal of Pharmaceutical Sciences. 57 (2): 321–323. doi:10.1002/jps.2600570218. PMID 5641681.

Further reading

• Scerri, Eric (2013). A Tale of Seven Elements. Oxford University Press, ISBN 9780195391312.

External links

• Rhenium at The Periodic Table of Videos (University of Nottingham)