Remove ads
Line containing four paths for trains From Wikipedia, the free encyclopedia
A quadruple-track railway (also known as a four-track railway) is a railway line consisting of four parallel tracks with two tracks used in each direction. Quadruple-track railways can handle large amounts of traffic, and so are used on very busy routes or sections. Such conversion is referred to as "quadruplication".
This article needs additional citations for verification. (January 2013) |
A railway line with six parallel tracks, or a sextuple-track railway, has three tracks in each direction. The corresponding term is "sextuplication".
There are also instances of railway lines or sections with eight tracks, and cases with three or five tracks. All experience similar upsides and downsides.
In quadruple track, trains are sorted in various ways in order to make maximum use of track capacity. These can include one or a combination of:
A faster express line and a stopping local line are separated, with each having a separate pair of tracks. Construction of new double tracks dedicated to high-speed rail alongside existing conventional double track used by regional and local passenger trains and freight trains is a form of quadruple track. It increases the capacity of that route significantly, and allows for significant increases in inter-city high-speed train frequency with reduced travel times.
Long-distance inter-city rail and freight trains are separated from short distance commuter rail. This helps to prevent delays on one service affecting the other, and is commonly seen in metropolitan areas. Quadrupling may be necessary when a new commuter rail service begins to operate on an existing line. Sometimes the local trains have separate technology, such as electrical system or signalling, which requires strict separation, for example in Berlin or Copenhagen.
When a quadruple-track line divides to different destinations part way along, trains need to be sorted by their destination.
Passenger trains and freight trains can be separated with each different track.
A variation of this can be found on the quadruple track section of the Main Northern line in New South Wales between Waratah and Maitland where one pair of tracks are used exclusively for coal trains and the other pair are used for passenger trains and general freight. A similar process, but with all intercity and commuter passenger trains on the outer tracks and thru-freight trains on the inner tracks, was done by the Pennsylvania Railroad on its New York–Washington and Philadelphia–Pittsburgh mainlines prior to the takeover of operations by Amtrak and Conrail (and later Norfolk Southern). This is somewhat still done to this day by NS, CSX, and Conrail Shared Assets trains on Amtrak-owned trackage in the Philadelphia area. Future passenger and freight-separated track pairs are planned by the state of Virginia on the corridor between Washington, D.C. and Richmond, Virginia,[1] and by California High-Speed Rail between Los Angeles and Fullerton, California.[2]
Two separate double-track lines in proximity to each other, e.g., two double-track lines along opposite sides of a river, can operate as a quadruple track line. Examples of this can be found in Rhone in France and Rhine in Germany.
As it can be seen from the pictures below in the Gallery of diagrams, the four tracks can be paired either by direction (slow and fast in each pair) or by purpose (speed or direction in each pair). Pairing by direction allows the railway to interface to a double track more easily. With fast trains in centre, local stations can be on the outside, eliminating staircases for half the passengers. With slow trains in centre or when pairing by speed there can be a common platform for local trains with one staircase and one ticket booth.
Sometimes two of the tracks go more straight and with a little distance from the two other. This is a design decision when widening a double track section, and allows higher speed on the faster tracks.
Several lines radiating from Brussels are quadrupled, for instance the Ghent-Ostend line as far as Essene-Lombeek. Further quadrupling has recently been carried out as part of the development of the Brussels Regional Express Network. The building of high-speed lines has also led to quadrupling - for instance the HSL 2 high-speed line between Brussels and Cologne runs inside the local lines as far as Leuven. Meanwhile since 1934 Brussels and Antwerp have been connected by two separate pairs of double track. Fast trains normally use line 25, while line 27 serves slow trains. In places they run parallel, but at times diverge and cross over each other.
There are two places in Denmark with four tracks:
By definition German railway lines have one or two tracks. Where more tracks are running parallel to each other, they are considered two or more separate lines. Such routes include:
There are some quadruple-track railways in the Oslo region. They are mostly two double tracks with slightly different routes, one older for local trains, and one newer mostly in tunnels for high-speed and regional trains.
The country never implemented a quadruple-track line throughout its history, but there are plans for sections of the North–South Commuter Railway (NSCR) to be quadruplicated.
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.