Remove ads
IPC is a trade association whose aim is to standardize the assembly and production requirements of electronic equipment and assemblies. IPC is headquartered in Bannockburn, Illinois, United States with additional offices in Washington, D.C. Atlanta, Ga., and Miami, Fla. in the United States, and overseas offices in China, Japan, Thailand, India, Germany, and Belgium.[1]
 | This article may have been created or edited in return for undisclosed payments, a violation of Wikipedia's terms of use. It may require cleanup to comply with Wikipedia's content policies, particularly neutral point of view. (May 2024) |
 | |
| Formation | 1957 |
|---|---|
| Type | Industry association |
| Headquarters | Bannockburn, Illinois United States |
Chairman | Robert Neves |
President and CEO | John W. Mitchell |
| Website | www |
Formerly called | Institute of Printed Circuits, Institute for Interconnecting and Packaging Electronic Circuits |
IPC is accredited by the American National Standards Institute (ANSI) as a standards developing organization[2] and is known globally for its standards. It publishes the most widely used acceptability standards in the electronics industry.
Remove ads
It was founded in 1957 as the Institute of Printed Circuits. Its name was later changed to the Institute for Interconnecting and Packaging Electronic Circuits to highlight the expansion from bare boards to packaging and electronic assemblies. In 1999, the organization formally changed its name to IPC with the accompanying tagline, Association Connecting Electronics Industries.[3]
IPC standards are used by the electronics manufacturing industry. IPC-A-610,[4] Acceptability of Electronic Assemblies, is used worldwide by original equipment manufacturers and EMS companies. There are more than 3600 trainers worldwide who are certified to train and test on the standard. Standards are created by committees of industry volunteers. Task groups have been formed in China, the United States, and Denmark.
Standards published by IPC include:
- General documents
- IPC-T-50 Terms and Definitions
- IPC-2615 Printed Board Dimensions and Tolerances
- IPC-D-325 Documentation Requirements for Printed Boards
- IPC-A-31 Flexible Raw Material Test Pattern
- IPC-ET-652 Guidelines and Requirements for Electrical Testing of Unpopulated Printed Boards
- Design specifications
- IPC-2612 Sectional Requirements for Electronic Diagramming Documentation (Schematic and Logic Descriptions)
- IPC-2141A Design Guide for High-Speed Controlled Impedance Circuit Boards
- IPC-2221 Generic Standard on Printed Board Design
- IPC-2223 Sectional Design Standard for Flexible Printed Boards
- IPC-2251 Design Guide for the Packaging of High Speed Electronic Circuit
- IPC-7351B Generic Requirements for Surface Mount Design and Land Pattern Standards
- Material specifications
- IPC-FC-234 Pressure Sensitive Adhesives Assembly Guidelines for Single-Sided and Double-Sided Flexible Printed Circuits
- IPC-4562 Metal Foil for Printed Wiring Applications
- IPC-4101 Laminate Prepreg Materials Standard for Printed Boards
- IPC-4202 Flexible Base Dielectrics for Use in Flexible Printed Circuitry
- IPC-4203 Adhesive Coated Dielectric Films for Use as Cover Sheets for Flexible Printed Circuitry and Flexible Adhesive Bonding Films
- IPC-4204 Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Circuitry
- Performance and inspection documents
- IPC-A-600 Acceptability of Printed Boards
- IPC-A-610 Acceptability of Electronic Assemblies
- IPC-6011 Generic Performance Specification for Printed Boards
- IPC-6012 Qualification and Performance Specification for Rigid Printed Boards
- IPC-6013 Specification for Printed Wiring, Flexible and Rigid-Flex
- IPC-6018 Qualification and Performance Specification for High Frequency (Microwave) Printed Boards
- IPC- 6202 IPC/JPCA Performance Guide Manual for Single- and Double-Sided Flexible Printed Wiring Boards
- PAS-62123 Performance Guide Manual for Single & Double Sided Flexible Printed Wiring Boards
- IPC-TF-870 Qualification and Performance of Polymer Thick Film Printed Boards
- Flex assembly and materials standards
- IPC-FA-251 Assembly Guidelines for Single and Double Sided Flexible Printed Circuits
- IPC-3406 Guidelines for Electrically Conductive Surface Mount Adhesives
- IPC-3408 General Requirements for Anisotropically Conductive Adhesives Films
Remove ads
IPC members are eligible to participate in IPC’s statistical programs, which provide free monthly or quarterly reports for specific industry and product markets. Statistical programs cover the electronics manufacturing services (EMS), printed circuit board (PCB), laminate, process consumables, solder and assembly equipment segments.[5]
Annual reports are distributed for the EMS and PCB segments, covering market size and sales growth, with breakdowns by product type and product mix as well as revenue trends from value-added services, trends in materials, financial metrics, and forecasts for total production in the Americas and the world.
Monthly market reports for the EMS and PCB segments provide recent data on market size, sales and order growth, book-to-bill ratios and near-term forecasts.[5]
Remove ads
Wikiwand in your browser!
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.
Remove ads