Glycine (symbol Gly or G;[6] /ˈɡlsn/ )[7] is an amino acid that has a single hydrogen atom as its side chain. It is the simplest stable amino acid (carbamic acid is unstable). In the gas phase, it is a molecule with the chemical formula NH2CH2COOH. In solution or in the solid, glycine exists as the zwitterion. Glycine is one of the proteinogenic amino acids. It is encoded by all the codons starting with GG (GGU, GGC, GGA, GGG). Glycine is integral to the formation of alpha-helices in secondary protein structure due to the "flexibility" caused by such a small R group. Glycine is also an inhibitory neurotransmitter – interference with its release within the spinal cord (such as during a Clostridium tetani infection) can cause spastic paralysis due to uninhibited muscle contraction.

Quick Facts Names, Identifiers ...
Glycine[1]
Thumb
Skeletal formula of neutral glycine
Thumb
Skeletal formula of zwitterionic glycine
Thumb
Ball-and-stick model of the gas-phase structure
Thumb
Ball-and-stick model of the zwitterionic solid-state structure
Thumb
Space-filling model of the gas-phase structure
Thumb
Space-filling model of the zwitterionic solid-state structure
Names
IUPAC name
Glycine
Systematic IUPAC name
Aminoacetic acid[2]
Other names
  • 2-Aminoethanoic acid
  • Glycocol
  • Glycic acid
  • Dicarbamic acid
Identifiers
3D model (JSmol)
Abbreviations Gly, G
ChEBI
ChEMBL
ChemSpider
DrugBank
ECHA InfoCard 100.000.248 Edit this at Wikidata
EC Number
  • 200-272-2
  • 227-841-8
E number E640 (flavour enhancer)
KEGG
UNII
  • InChI=1S/C2H5NH2/c3-1-2(4)5/h1,3H2,(H,4,5) checkY
    Key: DHMQDGOQFOQNFH-UHFFFAOYSA-N checkY
  • InChI=1S/C2H5NO2/c3-1-2(4)5/h1,3H2,(H,4,5)
    Key: DHMQDGOQFOQNFH-UHFFFAOYAW
  • C(C(=O)O)N
  • Zwitterion: C(C(=O)[O-])[NH3+]
  • C(C(=O)O)N.Cl
Properties
C2H5NO2
Molar mass 75.067 g·mol−1
Appearance White solid
Density 1.1607 g/cm3[3]
Melting point 233 °C (451 °F; 506 K) (decomposition)
249.9 g/L (25 °C)[4]
Solubility soluble in pyridine
sparingly soluble in ethanol
insoluble in ether
Acidity (pKa) 2.34 (carboxyl), 9.6 (amino)[5]
-40.3·10−6 cm3/mol
Pharmacology
B05CX03 (WHO)
Hazards
Lethal dose or concentration (LD, LC):
2600 mg/kg (mouse, oral)
Supplementary data page
Glycine (data page)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)
Close

It is the only achiral proteinogenic amino acid. It can fit into hydrophilic or hydrophobic environments, due to its minimal side chain of only one hydrogen atom.

History and etymology

Glycine was discovered in 1820 by French chemist Henri Braconnot when he hydrolyzed gelatin by boiling it with sulfuric acid.[8] He originally called it "sugar of gelatin",[9][10] but French chemist Jean-Baptiste Boussingault showed in 1838 that it contained nitrogen.[11] In 1847 American scientist Eben Norton Horsford, then a student of the German chemist Justus von Liebig, proposed the name "glycocoll";[12][13] however, the Swedish chemist Berzelius suggested the simpler current name a year later.[14][15] The name comes from the Greek word γλυκύς "sweet tasting"[16] (which is also related to the prefixes glyco- and gluco-, as in glycoprotein and glucose). In 1858, the French chemist Auguste Cahours determined that glycine was an amine of acetic acid.[17]

Production

Although glycine can be isolated from hydrolyzed protein, this route is not used for industrial production, as it can be manufactured more conveniently by chemical synthesis.[18] The two main processes are amination of chloroacetic acid with ammonia, giving glycine and ammonium chloride,[19] and the Strecker amino acid synthesis,[20] which is the main synthetic method in the United States and Japan.[21] About 15 thousand tonnes are produced annually in this way.[22]

Glycine is also cogenerated as an impurity in the synthesis of EDTA, arising from reactions of the ammonia coproduct.[23]

Chemical reactions

Its acid–base properties are most important. In aqueous solution, glycine is amphoteric: below pH = 2.4, it converts to the ammonium cation called glycinium. Above about 9.6, it converts to glycinate.

Thumb

Glycine functions as a bidentate ligand for many metal ions, forming amino acid complexes. A typical complex is Cu(glycinate)2, i.e. Cu(H2NCH2CO2)2, which exists both in cis and trans isomers.

With acid chlorides, glycine converts to the amidocarboxylic acid, such as hippuric acid[24] and acetylglycine.[25] With nitrous acid, one obtains glycolic acid (van Slyke determination). With methyl iodide, the amine becomes quaternized to give trimethylglycine, a natural product:

H
3
N+
CH
2
COO
+ 3 CH3I → (CH
3
)
3
N+
CH
2
COO
+ 3 HI

Glycine condenses with itself to give peptides, beginning with the formation of glycylglycine:

2 H
3
N+
CH
2
COO
H
3
N+
CH
2
CONHCH
2
COO
+ H2O

Pyrolysis of glycine or glycylglycine gives 2,5-diketopiperazine, the cyclic diamide.

It forms esters with alcohols. They are often isolated as their hydrochloride, e.g., glycine methyl ester hydrochloride. Otherwise the free ester tends to convert to diketopiperazine.

As a bifunctional molecule, glycine reacts with many reagents. These can be classified into N-centered and carboxylate-center reactions.

Metabolism

Biosynthesis

Glycine is not essential to the human diet, as it is biosynthesized in the body from the amino acid serine, which is in turn derived from 3-phosphoglycerate. In most organisms, the enzyme serine hydroxymethyltransferase catalyses this transformation via the cofactor pyridoxal phosphate:[26]

serine + tetrahydrofolate → glycine + N5,N10-methylene tetrahydrofolate + H2O

In E. coli, glycine is sensitive to antibiotics that target folate.[27]

In the liver of vertebrates, glycine synthesis is catalyzed by glycine synthase (also called glycine cleavage enzyme). This conversion is readily reversible:[26]

CO2 + NH+
4
+ N5,N10-methylene tetrahydrofolate + NADH + H+ ⇌ Glycine + tetrahydrofolate + NAD+

In addition to being synthesized from serine, glycine can also be derived from threonine, choline or hydroxyproline via inter-organ metabolism of the liver and kidneys.[28]

Degradation

Glycine is degraded via three pathways. The predominant pathway in animals and plants is the reverse of the glycine synthase pathway mentioned above. In this context, the enzyme system involved is usually called the glycine cleavage system:[26]

Glycine + tetrahydrofolate + NAD+ ⇌ CO2 + NH+
4
+ N5,N10-methylene tetrahydrofolate + NADH + H+

In the second pathway, glycine is degraded in two steps. The first step is the reverse of glycine biosynthesis from serine with serine hydroxymethyl transferase. Serine is then converted to pyruvate by serine dehydratase.[26]

In the third pathway of its degradation, glycine is converted to glyoxylate by D-amino acid oxidase. Glyoxylate is then oxidized by hepatic lactate dehydrogenase to oxalate in an NAD+-dependent reaction.[26]

The half-life of glycine and its elimination from the body varies significantly based on dose.[29] In one study, the half-life varied between 0.5 and 4.0 hours.[29]

Physiological function

The principal function of glycine is it acts as a precursor to proteins. Most proteins incorporate only small quantities of glycine, a notable exception being collagen, which contains about 35% glycine due to its periodically repeated role in the formation of collagen's helix structure in conjunction with hydroxyproline.[26][30] In the genetic code, glycine is coded by all codons starting with GG, namely GGU, GGC, GGA and GGG.

As a biosynthetic intermediate

In higher eukaryotes, δ-aminolevulinic acid, the key precursor to porphyrins, is biosynthesized from glycine and succinyl-CoA by the enzyme ALA synthase. Glycine provides the central C2N subunit of all purines.[26]

As a neurotransmitter

Glycine is an inhibitory neurotransmitter in the central nervous system, especially in the spinal cord, brainstem, and retina. When glycine receptors are activated, chloride enters the neuron via ionotropic receptors, causing an inhibitory postsynaptic potential (IPSP). Strychnine is a strong antagonist at ionotropic glycine receptors, whereas bicuculline is a weak one. Glycine is a required co-agonist along with glutamate for NMDA receptors. In contrast to the inhibitory role of glycine in the spinal cord, this behaviour is facilitated at the (NMDA) glutamatergic receptors which are excitatory.[31] The LD50 of glycine is 7930 mg/kg in rats (oral),[32] and it usually causes death by hyperexcitability.

As a toxin conjugation agent

Glycine conjugation pathway has not been fully investigated.[33] Glycine is thought to be a hepatic detoxifier of a number endogenous and xenobiotic organic acids.[34] Bile acids are normally conjugated to glycine in order to increase their solubility in water.[35]

The human body rapidly clears sodium benzoate by combining it with glycine to form hippuric acid which is then excreted.[36] The metabolic pathway for this begins with the conversion of benzoate by butyrate-CoA ligase into an intermediate product, benzoyl-CoA,[37] which is then metabolized by glycine N-acyltransferase into hippuric acid.[38]

Uses

In the US, glycine is typically sold in two grades: United States Pharmacopeia ("USP"), and technical grade. USP grade sales account for approximately 80 to 85 percent of the U.S. market for glycine. If purity greater than the USP standard is needed, for example for intravenous injections, a more expensive pharmaceutical grade glycine can be used. Technical grade glycine, which may or may not meet USP grade standards, is sold at a lower price for use in industrial applications, e.g., as an agent in metal complexing and finishing.[39]

Animal and human foods

Thumb
Structure of cis-Cu(glycinate)2(H2O)[40]

Glycine is not widely used in foods for its nutritional value, except in infusions. Instead, glycine's role in food chemistry is as a flavorant. It is mildly sweet, and it counters the aftertaste of saccharine. It also has preservative properties, perhaps owing to its complexation to metal ions. Metal glycinate complexes, e.g. copper(II) glycinate are used as supplements for animal feeds.[22]

As of 1971, the U.S. Food and Drug Administration "no longer regards glycine and its salts as generally recognized as safe for use in human food",[41] and only permits food uses of glycine in certain conditions.[42]

Glycine has been researched for its potential to extend life.[43][44] The proposed mechanisms of this effect are its ability to clear methionine from the body, and activating autophagy.[43]

Chemical feedstock

Glycine is an intermediate in the synthesis of a variety of chemical products. It is used in the manufacture of the herbicides glyphosate,[45] iprodione, glyphosine, imiprothrin, and eglinazine.[22] It is used as an intermediate of antibiotics such as thiamphenicol.[citation needed]

Laboratory research

Glycine is a significant component of some solutions used in the SDS-PAGE method of protein analysis. It serves as a buffering agent, maintaining pH and preventing sample damage during electrophoresis.[46] Glycine is also used to remove protein-labeling antibodies from Western blot membranes to enable the probing of numerous proteins of interest from SDS-PAGE gel. This allows more data to be drawn from the same specimen, increasing the reliability of the data, reducing the amount of sample processing, and number of samples required.[47] This process is known as stripping.

Presence in space

The presence of glycine outside the Earth was confirmed in 2009, based on the analysis of samples that had been taken in 2004 by the NASA spacecraft Stardust from comet Wild 2 and subsequently returned to Earth. Glycine had previously been identified in the Murchison meteorite in 1970.[48] The discovery of glycine in outer space bolstered the hypothesis of so called soft-panspermia, which claims that the "building blocks" of life are widespread throughout the universe.[49] In 2016, detection of glycine within Comet 67P/Churyumov–Gerasimenko by the Rosetta spacecraft was announced.[50]

The detection of glycine outside the Solar System in the interstellar medium has been debated.[51]

Evolution

Glycine is proposed to be defined by early genetic codes.[52][53][54][55] For example, low complexity regions (in proteins), that may resemble the proto-peptides of the early genetic code are highly enriched in glycine.[55]

Presence in foods

More information Food, Percentagecontentby weight (g/100g) ...
Food sources of glycine[56]
Food Percentage
content
by weight
(g/100g)
Snacks, pork skins11.04
Sesame seeds flour (low fat)3.43
Beverages, protein powder (soy-based)2.37
Seeds, safflower seed meal, partially defatted2.22
Meat, bison, beef and others (various parts)1.5–2.0
Gelatin desserts1.96
Seeds, pumpkin and squash seed kernels1.82
Turkey, all classes, back, meat and skin1.79
Chicken, broilers or fryers, meat and skin1.74
Pork, ground, 96% lean / 4% fat, cooked, crumbles1.71
Bacon and beef sticks1.64
Peanuts1.63
Crustaceans, spiny lobster1.59
Spices, mustard seed, ground1.59
Salami1.55
Nuts, butternuts, dried1.51
Fish, salmon, pink, canned, drained solids1.42
Almonds1.42
Fish, mackerel0.93
Cereals ready-to-eat, granola, homemade0.81
Leeks, (bulb and lower-leaf portion), freeze-dried0.7
Cheese, parmesan (and others), grated0.56
Soybeans, green, cooked, boiled, drained, without salt0.51
Bread, protein (includes gluten)0.47
Egg, whole, cooked, fried0.47
Beans, white, mature seeds, cooked, boiled, with salt0.38
Lentils, mature seeds, cooked, boiled, with salt0.37
Close

See also

References

Further reading

Wikiwand in your browser!

Seamless Wikipedia browsing. On steroids.

Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.

Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.