Loading AI tools
European orbiter mission to Venus (2005–2015) From Wikipedia, the free encyclopedia
Venus Express (VEX) was the first Venus exploration mission of the European Space Agency (ESA). Launched in November 2005, it arrived at Venus in April 2006 and began continuously sending back science data from its polar orbit around Venus. Equipped with seven scientific instruments, the main objective of the mission was the long term observation of the Venusian atmosphere. The observation over such long periods of time had never been done in previous missions to Venus, and was key to a better understanding of the atmospheric dynamics. ESA concluded the mission in December 2014.[6]
Mission type | Venus orbiter |
---|---|
Operator | European Space Agency |
COSPAR ID | 2005-045A |
SATCAT no. | 28901 |
Website | www |
Mission duration | Planned: 2 years Final: 9 years, 2 months, 9 days |
Spacecraft properties | |
Manufacturer | EADS Astrium |
Launch mass | 1,270 kg (2,800 lb)[1] |
Dry mass | 700 kg (1,500 lb)[1] |
Payload mass | 93 kg (205 lb)[1] |
Dimensions | 1.5 × 1.8 × 1.4 m (4.9 × 5.9 × 4.6 ft)[1] |
Power | 1,100 watts[1] |
Start of mission | |
Launch date | 9 November 2005, 03:33:34 UTC[2] |
Rocket | Soyuz-FG/Fregat |
Launch site | Baikonur 31/6 |
Contractor | Starsem |
End of mission | |
Disposal | Deorbited |
Last contact | 18 January 2015, 15:01:55 UTC[3] |
Decay date | January / February 2015 |
Orbital parameters | |
Reference system | Cytherocentric |
Pericytherion altitude | 460 km (290 mi)[4] |
Apocytherion altitude | 63,000 km (39,000 mi)[4] |
Inclination | 90 degrees[5] |
Period | 24 hours[5] |
Venus orbiter | |
Orbital insertion | 11 April 2006 |
ESA Solar System insignia for the Venus Express mission |
The mission was proposed in 2001 to reuse the design of the Mars Express mission. However, some mission characteristics led to design changes: primarily in the areas of thermal control, communications and electrical power. For example, since Mars is approximately twice as far from the Sun as Venus, the radiant heating of the spacecraft is four times greater for Venus Express than Mars Express. Also, the ionizing radiation environment is harsher. On the other hand, the more intense illumination of the solar panels results in more generated photovoltaic power. The Venus Express mission also uses some spare instruments developed for the Rosetta spacecraft. The mission was proposed by a consortium led by D. Titov (Germany), E. Lellouch (France) and F. Taylor (United Kingdom).
The launch window for Venus Express was open from 26 October to 23 November 2005, with the launch initially set for 26 October 4:43 UTC. However, problems with the insulation from the Fregat upper stage led to a two-week launch delay to inspect and clear out the small insulation debris that migrated on the spacecraft.[7] It was eventually launched by a Soyuz-FG/Fregat rocket from the Baikonur Cosmodrome in Kazakhstan on 9 November 2005 at 03:33:34 UTC into a parking Earth orbit and 1 h 36 min after launch put into its transfer orbit to Venus. A first trajectory correction maneuver was successfully performed on 11 November 2005. It arrived at Venus on 11 April 2006, after 153 days of journey, and fired its main engine between 07:10:29 and 08:00:42 UTC SCET to reduce its velocity so that it could be captured by Venusian gravity into a nine-day orbit of 400 by 330,000 kilometres (250 by 205,050 mi).[8] The burn was monitored from ESA's Control Centre, ESOC, in Darmstadt, Germany.
Seven further orbit control maneuvers, two with the main engine and five with the thrusters, were required for Venus Express to reach its final operational 24-hour orbit around Venus.[8]
Venus Express entered its target orbit at apoapsis on 7 May 2006 at 13:31 UTC, when the spacecraft was 151,000,000 kilometres (94,000,000 mi) from Earth. At this point the spacecraft was running on an ellipse substantially closer to the planet than during the initial orbit. The polar orbit ranged between 250 and 66,000 kilometres (160 and 41,010 mi) over Venus. The periapsis was located almost above the North pole (80° North latitude), and it took 24 hours for the spacecraft to travel around the planet.
Venus Express studied the Venusian atmosphere and clouds in detail, the plasma environment and the surface characteristics of Venus from orbit. It also made global maps of the Venusian surface temperatures. Its nominal mission was originally planned to last for 500 Earth days (approximately two Venusian sidereal days), but the mission was extended five times: first on 28 February 2007 until early May 2009; then on 4 February 2009 until 31 December 2009; and then on 7 October 2009 until 31 December 2012.[9] On 22 November 2010, the mission was extended to 2014.[10] On 20 June 2013, the mission was extended a final time until 2015.[11]
On 28 November 2014, mission control lost contact with Venus Express. Intermittent contact was reestablished on 3 December 2014, though there was no control over the spacecraft, likely due to exhaustion of propellant.[12] On 16 December 2014, ESA announced that the Venus Express mission had ended.[6] A carrier signal was still being received from the vehicle, but no data was being transmitted. Mission manager Patrick Martin expected the spacecraft would fall below 150 kilometres (93 mi) in early January 2015, with destruction occurring in late January or early February.[13] The spacecraft's carrier signal was last detected by ESA on 18 January 2015.[3]
ASPERA-4: An acronym for "Analyzer of Space Plasmas and Energetic Atoms," ASPERA-4 investigated the interaction between the solar wind and the Venusian atmosphere, determine the impact of plasma processes on the atmosphere, determine global distribution of plasma and neutral gas, study energetic neutral atoms, ions and electrons, and analyze other aspects of the near Venus environment. ASPERA-4 is a re-use of the ASPERA-3 design used on Mars Express, but adapted for the harsher near-Venus environment.
MAG: The magnetometer was designed to measure the strength of Venus's magnetic field and the direction of it as affected by the solar wind and Venus itself. It mapped the magnetosheath, magnetotail, ionosphere, and magnetic barrier in high resolution in three-dimensions, aid ASPERA-4 in the study of the interaction of the solar wind with the atmosphere of Venus, identify the boundaries between plasma regions, and carry planetary observations as well (such as the search for and characterization of Venus lightning). MAG was derived from the Rosetta lander's ROMAP instrument.
One measuring device was placed on the body of the craft. The identical second of the pair was placed the necessary distance away from the body by unfolding a 1 m long boom (carbon composite tube). Two redundant pyrotechnical cutters cut one loop of thin rope to free the power of metal springs. The driven knee lever rotated the boom perpendicularly outwards and latched it in place. Only the use of a pair of sensors together with the rotation of the probe allowed the spacecraft to resolve the small natural magnetic field beneath the disturbing fields of the probe itself. The measurements to identify the fields produced by the craft took place on the route from Earth to Venus.[14][15] The lack of magnetic cleanness was due to the reuse of the Mars Express spacecraft bus, which did not carry a magnetometer.[15] By combining the data from two-point simultaneous measurements and using software to identify and remove interference generated by Venus Express itself, it was possible to obtain results of a quality comparable to those produced by a magnetically clean craft.[15]
VMC: The Venus Monitoring Camera is a wide-angle, multi-channel CCD. The VMC is designed for global imaging of the planet.[16] It operated in the visible (VIS), ultraviolet (UV), and near infrared (NIR1 and NIR2) spectral ranges, and maps surface brightness distribution searching for volcanic activity, monitoring airglow, studying the distribution of unknown ultraviolet absorbing phenomenon at the cloud-tops, and making other science observations. It was derived in part from the Mars Express High Resolution Stereo Camera (HRSC) and the Rosetta Optical, Spectroscopic and Infrared Remote Imaging System (OSIRIS). The camera is based on a Kodak KAI-1010 Series, 1024 x 1024 pixel interline CCD, and included an FPGA to pre-process image data, reducing the amount transmitted to Earth.[17][18] The consortium of institutions responsible for the VMC included the Max Planck Institute for Solar System Research, the Institute of Planetary Research at the German Aerospace Center and the Institute of Computer and Communication Network Engineering at Technische Universität Braunschweig.[19] It is not to be confused with Visual Monitoring Camera mounted on Mars Express, of which it is an evolution.[17][20]
VMC Channel | Central Wavelength | Spectral Range |
---|---|---|
VIS | 513 nm | 503 – 523 nm |
NIR1 | 935 nm | 900 – 970 nm |
NIR2 | 1.01 μm | 990 – 1030 nm |
UV | 365 nm | 345 – 385 nm |
PFS: The "Planetary Fourier Spectrometer" (PFS) should have operated in the infrared between the 0.9 μm and 45 μm wavelength range and was designed to perform vertical optical sounding of the Venus atmosphere. It should have performed global, long-term monitoring of the three-dimensional temperature field in the lower atmosphere (cloud level up to 100 kilometers). Furthermore, it should have searched for minor atmospheric constituents that may be present, but had not yet been detected, analyzed atmospheric aerosols, and investigated surface to atmosphere exchange processes. The design was based on a spectrometer on Mars Express, but modified for optimal performance for the Venus Express mission. However PFS failed during its deployment and no useful data was transmitted.[21]
SPICAV: The "SPectroscopy for Investigation of Characteristics of the Atmosphere of Venus" (SPICAV) is an imaging spectrometer that was used for analyzing radiation in the infrared and ultraviolet wavelengths. It was derived from the SPICAM instrument flown on Mars Express. However, SPICAV had an additional channel known as SOIR (Solar Occultation at Infrared) that was used to observe the Sun through Venus's atmosphere in the infrared.
VIRTIS: The "Visible and Infrared Thermal Imaging Spectrometer" (VIRTIS) was an imaging spectrometer that observed in the near-ultraviolet, visible, and infrared parts of the electromagnetic spectrum. It analyzed all layers of the atmosphere, surface temperature and surface/atmosphere interaction phenomena.
VeRa: Venus Radio Science was a radio sounding experiment that transmitted radio waves from the spacecraft and passed them through the atmosphere or reflected them off the surface. These radio waves were received by a ground station on Earth for analysis of the ionosphere, atmosphere and surface of Venus. It was derived from the Radio Science Investigation instrument flown on Rosetta.
Starting out in the early planetary system with similar sizes and chemical compositions, the histories of Venus and Earth have diverged in spectacular fashion. It is hoped that the Venus Express mission data that was obtained can contribute not only to an in-depth understanding of how the Venusian atmosphere is structured, but also to an understanding of the changes that led to the current greenhouse atmospheric conditions. Such an understanding may contribute to the study of climate change on Earth.[22]
In 2006, its research result identified the differences between Venus and Earth and started to observe routine climate changes. [23]
Venus Express was also used to observe signs of life on Earth from Venus orbit. In images acquired by the probe, Earth was less than one pixel in size, which mimics observations of Earth-sized planets in other planetary systems. These observations were then used to develop methods for habitability studies of exoplanets.[24]
Event | Spacecraft event time (UTC) | Ground receive time (UTC) |
---|---|---|
Liquid Settling Phase start | 07:07:56 | 07:14:41 |
VOI main engine start | 07:10:29 | 07:17:14 |
periapsis passage | 07:36:35 | |
eclipse start | 07:37:46 | |
occultation start | 07:38:30 | 07:45:15 |
occultation end | 07:48:29 | 07:55:14 |
eclipse end | 07:55:11 | |
VOI burn end | 08:00:42 | 08:07:28 |
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.