Loading AI tools
First general-purpose computer designed for business application (1951) From Wikipedia, the free encyclopedia
The UNIVAC I (Universal Automatic Computer I) was the first general-purpose electronic digital computer design for business application produced in the United States. It was designed principally by J. Presper Eckert and John Mauchly, the inventors of the ENIAC. Design work was started by their company, Eckert–Mauchly Computer Corporation (EMCC), and was completed after the company had been acquired by Remington Rand (which later became part of Sperry, now Unisys). In the years before successor models of the UNIVAC I appeared, the machine was simply known as "the UNIVAC".[1]
The first UNIVAC was accepted by the United States Census Bureau on March 31, 1951, and was dedicated on June 14 that year.[2][3] The fifth machine (built for the U.S. Atomic Energy Commission) was used by CBS to predict the result of the 1952 presidential election. With a sample of a mere 5.5% of the voter turnout, it famously predicted an Eisenhower landslide.[4]
The UNIVAC I was the first American computer designed at the outset for business and administrative use with fast execution of relatively simple arithmetic and data transport operations, as opposed to the complex numerical calculations required of scientific computers. As such, the UNIVAC competed directly against punch-card machines, though the UNIVAC originally could neither read nor punch cards. That shortcoming hindered sales to companies concerned about the high cost of manually converting large quantities of existing data stored on cards. This was corrected by adding offline card processing equipment, the UNIVAC Tape to Card converter, to transfer data between cards and UNIVAC magnetic tapes.[5] However, the early market share of the UNIVAC I was lower than the Remington Rand Company wished.[citation needed]
To promote sales, the company partnered with CBS to have UNIVAC I predict the result of the 1952 United States presidential election live on television. The machine predicted that Dwight D. Eisenhower would win in a landslide over Adlai Stevenson at a chance of 100 to 1, receive 32,915,949 votes and win the Electoral College 438–93. It was opposed to the final Gallup Poll, which had predicted that Eisenhower would win in a close contest. The CBS crew was so certain that UNIVAC was wrong that they believed it was not working, so they changed a certain "national trend factor" from 40% to 4% to obtain what appeared more correct 268–263, and released that for the television. It was soon noticed that the prediction assuming 40% was closer to truth, so they changed it back.[6][7]
On election night, Eisenhower received 34,075,029 votes in a 442–89 Electoral College victory. UNIVAC had a margin of error of 3.5% of Eisenhower's popular vote tally and was within four votes of his electoral vote total.[citation needed] The prediction and its use in CBS's election coverage gave rise to a greater public awareness of computing technology,[8] while computerized predictions became a widely-used part of election night broadcasts.[citation needed]
The first contracts were with government agencies such as the Census Bureau, the U.S. Air Force, and the U.S. Army Map Service.[1] Contracts were also signed by the ACNielsen Company, and the Prudential Insurance Company. Following the sale of Eckert–Mauchly Computer Corporation to Remington Rand in 1950, due to the cost overruns on the project, Remington Rand convinced Nielsen and Prudential to cancel their contracts.[citation needed]
The first sale, to the Census Bureau, was marked with a formal ceremony on March 31, 1951, at the Eckert–Mauchly Division's factory at 3747 Ridge Avenue, Philadelphia. The machine was not actually shipped until the following December, because, as the sole fully set-up model, it was needed for demonstration purposes, and the company was apprehensive about the difficulties of dismantling, transporting, and reassembling the delicate machine.[9] As a result, the first installation was with the second computer, delivered to the Pentagon in June 1952.[citation needed]
| Date | Customer | Comments |
|---|---|---|
| 1951 | U.S. Census Bureau, Suitland, MD | Not shipped until 1952[10][11] |
| 1952 | U.S. Air Force | Pentagon, Arlington, VA[12] |
| 1952 | U.S. Army Map Service | Washington, DC.[13] Operated at factory April–September 1952 |
| 1953 | New York University (for the Atomic Energy Commission) | New York, NY[14] |
| 1953 | Atomic Energy Commission | Livermore, CA |
| 1953 | U.S. Navy | David W. Taylor Model Basin, Bethesda, MD[14] |
| 1954 | Remington Rand | Sales office, New York, NY |
| 1954 | General Electric | Appliance Division, Louisville, KY. First business sale.[15] |
| 1954 | Metropolitan Life | New York, NY[16] |
| 1954 | U.S. Air Force | Wright-Patterson AFB, Dayton, OH |
| 1954 | U.S. Steel | Pittsburgh, PA |
| 1954 | Du Pont | Wilmington, DE |
| 1954 | U.S. Steel | Gary, IN |
| 1954 | Franklin Life Insurance | Springfield, IL[17] |
| 1954 | Westinghouse | Pittsburgh, PA |
| 1954 | Pacific Mutual Life Insurance | Los Angeles, CA |
| 1954 | Sylvania Electric | New York, NY |
| 1954 | Consolidated Edison | New York, NY[18] |
Originally priced at US$159,000, the UNIVAC I rose in price until they were between $1,250,000 and $1,500,000. A total of 46 systems were eventually built and delivered.[citation needed]
The UNIVAC I was too expensive for most universities, and Sperry Rand, unlike companies such as IBM, was not strong enough financially to afford to give many away. However, Sperry Rand donated UNIVAC I systems to Harvard University (1956), the University of Pennsylvania (1957), and Case Institute of Technology in Cleveland, Ohio (1957). The UNIVAC I at Case was still operable in 1965 but had been supplanted by a UNIVAC 1107.[citation needed]
A few UNIVAC I systems stayed in service long after they were made obsolete by advancing technology. The Census Bureau used its two systems until 1963, amounting to 12 and 9 years of service, respectively. Sperry Rand itself used two systems in Buffalo, New York until 1968. The insurance company Life and Casualty of Tennessee used its system until 1970, totaling over 13 years of service.[citation needed]
 | This section needs additional citations for verification. (March 2015) |
UNIVAC I used 6,103 vacuum tubes,[19][20] weighed 16,686 pounds (8.3 short tons; 7.6 t), consumed 125 kW,[21] and could perform about 1,905 operations per second running on a 2.25 MHz clock. The Central Complex alone (i.e. the processor and memory unit) was 4.3 m by 2.4 m by 2.6 m high. The complete system occupied more than 35.5 m2 (382 ft2) of floor space.[citation needed]
The main memory consisted of 1000 words of 12 characters each. When representing numbers, they were written as 11 decimal digits plus sign. The 1000 words of memory consisted of 100 channels of 10-word mercury delay-line registers. The input/output buffers were 60 words each, consisting of 12 channels of 10-word mercury delay-line registers. There are six channels of 10-word mercury delay-line registers as spares. With modified circuitry, seven more channels control the temperature of the seven mercury tanks, and one more channel is used for the 10-word "Y" register. The total of 126 mercury channels is contained in the seven mercury tanks mounted on the backs of sections MT, MV, MX, NT, NV, NX, and GV. Each mercury tank is divided into 18 mercury channels.[citation needed]
Each 10-word mercury delay-line channel is made up of three sections:
.jpg)
Instructions were six alphanumeric characters, packed two instructions per word. The addition time was 525 microseconds and the multiplication time was 2150 microseconds. A non-standard modification called "Overdrive" did exist, that allowed for three four-character instructions per word under some circumstances. (Ingerman's simulator for the UNIVAC, referenced below, also makes this modification available.)[citation needed]
Digits were represented internally using excess-3 ("XS3") binary-coded decimal (BCD) arithmetic with six bits per digit using the same value as the digits of the alphanumeric character set (and one parity bit per digit for error checking), allowing 11-digit signed magnitude numbers. But with the exception of one or two machine instructions, UNIVAC was considered by programmers to be a decimal machine, not a binary machine, and the binary representation of the characters was irrelevant. If a non-digit character was encountered in a position during an arithmetic operation the machine passed it unchanged to the output, and any carry into the non-digit was lost. (Note, however, that a peculiarity of UNIVAC I's addition/subtraction circuitry was that the "ignore", space, and minus characters were occasionally treated as numeric, with values of –3, –2, and –1, respectively, and the apostrophe, ampersand, and left parenthesis were occasionally treated as numeric, with values 10, 11, and 12.)[citation needed]
Besides the operator's console, the only I/O devices connected to the UNIVAC I were up to 10 UNISERVO tape drives, a Remington Standard electric typewriter and a Tektronix oscilloscope. The UNISERVO was the first commercial computer tape drive commercially sold. It used data density 128 bits per inch (with real transfer rate 7,200 characters per second) on magnetically plated phosphor bronze tapes. The UNISERVO could also read and write UNITYPER created tapes at 20 bits per inch. The UNITYPER was an offline typewriter to tape device, used by programmers and for minor data editing. Backward and forward tape read and write operations were possible on the UNIVAC and were fully overlapped with instruction execution, permitting high system throughput in typical sort/merge data processing applications. Large volumes of data could be submitted as input via magnetic tapes created on offline card to tape system and made as output via a separate offline tape to printer system. The operators console had three columns of decimal coded switches that allowed any of the 1000 memory locations to be displayed on the oscilloscope. Since the mercury delay-line memory stored bits in a serial format, a programmer or operator could monitor any memory location continuously and with sufficient patience, decode its contents as displayed on the scope. The on-line typewriter was typically used for announcing program breakpoints, checkpoints, and for memory dumps.[citation needed]
A typical UNIVAC I installation had several ancillary devices. There were:
UNIVAC did not provide an operating system. Operators loaded on a UNISERVO a program tape which could be loaded automatically by processor logic. The appropriate source and output data tapes would be mounted and the program started. Results tapes then went to the offline printer or typically for data processing into short-term storage to be updated with the next set of data produced on the offline card to tape unit. The mercury delay-line memory tank temperature was very closely controlled as the speed of sound in mercury varies with temperature. In the event of a power failure, many hours could elapse before the temperature stabilized.[citation needed]
Eckert and Mauchly were uncertain about the reliability of digital logic circuits—little was known about them at the time. The UNIVAC had been designed with parallel computation circuits and a statistical comparison of the results. In practice, however, only failing components, i.e., the vacuum tubes, yielded comparison faults, as the circuit designs as such proved very reliable. A regimen was established to ensure the reliability of the fragile vacuum tubes, the choke point of the entire operation. Prior to use large lots of the predominant tube type 25L6 were burned in and thoroughly tested. (Often half of any given production lot would be thrown away.) Technicians would then install a tested and burned-in tube in an easily diagnosed location such as the memory recirculate amplifiers. Then, when further proven aged and proven reliable, this "golden" tube was sent to stock to be pulled out for difficult-to-diagnose logic positions.
Furthermore, it took approximately 30 minutes to turn on the computer—all cathode heater power was stepped up gradually in order to reduce the in-rush current the concominant thermal stress on the tubes. As a result of these measures, uptimes (MTBF) of many days to weeks were eventually obtained on the processor. (The UNISERVO did not have vacuum columns but rather springs and strings to buffer the tape from the reels to the capstan. These mechanical components then became the most frequent source of failures.)[citation needed]
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.
