Remove ads
Type of knot From Wikipedia, the free encyclopedia
Two half-hitches is a type of knot, specifically a binding knot or hitch knot. One variety consists of an overhand knot tied around a post, followed by a half-hitch. This knot is less often referred to as a clove hitch over itself, double half-hitch, or full-hitch.
Two half hitches is the commonest of all hitches for mooring in particular and also for general utility. Steel gives the name in 1794. The difference between two half hitches and the clove hitch is that the former, after a single turn around a spar, is made fast around its own standing part, while the latter is tied directly around the spar.
Two half-hitches | |
---|---|
Category | Hitch |
Origin | Ancient |
Related | Round turn and two half-hitches, Buntline hitch, Clove hitch, Taut-line hitch, Half hitch |
Releasing | Binding |
Typical use | General-purpose hitch |
Caveat | low security |
ABoK | #1710 #1781 |
The following three-step process for tying the two half-hitches is also explained in the image gallery below. Click on the images for high-resolution versions.
To release the knot, pry apart the two hitches with a bending motion. However, it can often be difficult to untie. To help avoid this problem, tie a slipped variation: in the second half-hitch, pass through a bight, as when tying your shoe, rather than the entire free end.
The buntline hitch, when bent to a yard, makes a more secure knot than two half hitches, but is more liable to jam. It differs from two half hitches in that the second half hitch is inside instead of outside the first one.
Ashley Lesson #1781 has quotations on using two half-hitches for safety:
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.