Tibetan script

Tibetan writing system From Wikipedia, the free encyclopedia

Tibetan script

The Tibetan script is a segmental writing system, or abugida, forming a part of the Brahmic scripts, and used to write certain Tibetic languages, including Tibetan, Dzongkha, Sikkimese, Ladakhi, Jirel and Balti. Its exact origins are a subject of research but is traditionally considered to be developed by Thonmi Sambhota for King Songtsen Gampo.

Quick Facts Tibetan བོད་ཡིག་, Script type ...
Tibetan
བོད་ཡིག་
Script type
Time period
c.620–present
DirectionLeft-to-right 
Languages
Related scripts
Parent systems
Child systems
Sister systems
Meitei,[3][4] Sharada, Siddham, Kalinga, Bhaiksuki
ISO 15924
ISO 15924Tibt (330), Tibetan
Unicode
Unicode alias
Tibetan
U+0F00U+0FFF Final Accepted Script Proposal of the First Usable Edition (3.0)
 This article contains phonetic transcriptions in the International Phonetic Alphabet (IPA). For an introductory guide on IPA symbols, see Help:IPA. For the distinction between [ ], / / and  , see IPA § Brackets and transcription delimiters.
Close

The printed form is called uchen script while the hand-written form used in everyday writing is called umê script. This writing system is especially used across the Himalayan Region.

History

Summarize
Perspective

Little is known about the exact origins of Tibetan script.[5] According to Tibetan historiography, it was developed during the reign of King Songtsen Gampo by his minister Thonmi Sambhota, who was sent to India along with other scholars to study Buddhism along with Sanskrit and other brahmi languages.[6][7] They developed the Tibetan script from the Gupta script[8] while at the Pabonka Hermitage.

This occurred c.620, towards the beginning of Songtsen Gampo's reign. There were 21 Sutra texts held by the King which were translated afterwards. In the first half of the 7th century, the Tibetan script was used for the codification of these sacred Buddhist texts,[9][10] for written civil laws, and for a Tibetan Constitution.

Earliest sources on Tibet, such as the Old Tibetan Chronicle, do not mention any Thonmi Sambhota.[11] Scripts predating Songtsen Gampo might have existed but in any case do not appear to be widely used.[11] Researchers postulate that Tibetan kings sought to develop a system of writing as their territory expanded. The script resembling the version today was likely developed in the second half of the 11th century.[11][12] New research and writings also suggest that there were one or more Tibetan scripts in use prior to the introduction of the script by Songtsen Gampo and Thonmi Sambhota. The incomplete Dunhuang manuscripts are their key evidence for their hypothesis,[13] while the few discovered and recorded Old Tibetan Annals manuscripts date from 650 and therefore post-date the c. 620 date of development of the original Tibetan script.

Three orthographic standardisations were developed. The most important, an official orthography aimed to facilitate the translation of Buddhist scriptures emerged during the early 9th century. Standard orthography has not been altered since then, while the spoken language has changed by, for example, losing complex consonant clusters. As a result, in all modern Tibetan dialects and in particular in the Standard Tibetan of Lhasa, there is a great divergence between current spelling, which still reflects the 9th-century spoken Tibetan, and current pronunciation. This divergence is the basis of an argument in favour of spelling reform, to write Tibetan as it is pronounced; for example, writing Kagyu instead of Bka'-rgyud.[14]

The nomadic Amdo Tibetan and the western dialects of the Ladakhi language, as well as the Balti language, come close to the Old Tibetan spellings.[12] Despite that, the grammar of these dialectical varieties has considerably changed. To write the modern varieties according to the orthography and grammar of Classical Tibetan would be similar to writing Sanskrit orthography.[12] However, modern Buddhist practitioners in the Indian subcontinent state that the classical orthography should not be altered even when used for lay purposes. This became an obstacle for many modern Tibetic languages wishing to modernize or introduce a new spelling reform of Tibetan. [12]

Description

Summarize
Perspective

Basic alphabet

In the Tibetan script, the syllables are written from left to right. Syllables are separated by a tsek (་); since many Tibetan words are monosyllabic, this mark often functions almost as a space. Spaces are not used to divide words.[15]

The Tibetan alphabet has thirty letters, sometimes known as "radicals", for consonants.[16] As in other Indic scripts, each consonant letter assumes an inherent vowel; in the Tibetan script it is /a/. The letter is also the base for dependent vowel marks.

Although some Tibetan dialects are tonal, the language had no tone at the time of the script's invention, and there are no dedicated symbols for tone. However, since tones developed from segmental features, they can usually be correctly predicted by the archaic spelling of Tibetan words.

More information Unaspirated high, Aspirated medium ...
Unaspirated
high
Aspirated
medium
Voiced
low
Nasal
low
Letter IPA Letter IPA Letter IPA Letter IPA
Guttural/ka//kʰa/[i]/ɡa//ŋa/
Palatal/tʃa//tʃʰa/[i]/dʒa//ɲa/
Dental/ta//tʰa/[i]/da//na/
Labial/pa//pʰa/[i]/ba//ma/
Dental /tsa//tsʰa/[i]/dza//wa/
low[i]/ʒa/[i]/za//ɦa/[17] ʼa/ja/
medium/ra//la//ʃa//sa/
high/ha//a/ ꞏa
Close
  1. These voiced values are historical. They have been devoiced in modern Standard Tibetan.

Consonant clusters

Thumb
Components of a Tibetan syllable
Thumb
Tibetan map of the Kizil Caves, Tarim Basin. 13th century CE

One aspect of the Tibetan script is that the consonants can be written either as radicals or they can be written in other forms, such as subscript and superscript forming consonant clusters.

To understand how this works, one can look at the radical /ka/ and see what happens when it becomes ཀྲ /kra/ or རྐ /rka/ (pronounced /ka/). In both cases, the symbol for /ka/ is used, but when the /ra/ is in the middle of the consonant and vowel, it is added as a subscript. On the other hand, when the /ra/ comes before the consonant and vowel, it is added as a superscript.[16] /ra/ actually changes form when it is above most other consonants, thus རྐ rka. However, an exception to this is the cluster རྙ /ɲa/. Similarly, the consonants /ra/, and /ja/ change form when they are beneath other consonants, thus ཀྲ /ʈ ~ ʈʂa/; ཀྱ /ca/.

Besides being written as subscripts and superscripts, some consonants can also be placed in prescript, postscript, or post-postscript positions. For instance, the consonants /kʰa/, /tʰa/, /pʰa/, /ma/ and /a/ can be used in the prescript position to the left of other radicals, while the position after a radical (the postscript position), can be held by the ten consonants /kʰa/, /na/, /pʰa/, /tʰa/, /ma/, /a/, /ra/, /ŋa/, /sa/, and /la/. The third position, the post-postscript position is solely for the consonants /tʰa/ and /sa/.[16]

Head letters

The head (མགོ in Tibetan, Wylie: mgo) letter, or superscript, position above a radical is reserved for the consonants /ra/, /la/, and /sa/.

  • When /ra/, /la/, and /sa/ are in superscript position with /ka/, /t͡ʃa/, /ta/, /pa/ and /t͡sa/, there are no changes to their sounds in Lhasa Tibetan, for example:
    • རྐ /ka/, རྟ /ta/, རྤ /pa/, རྩ /t͡sa/
    • ལྐ /ka/, ལྕ /t͡ʃa/, ལྟ /ta/, ལྤ /pa/,
    • སྐ /ka/, སྟ /ta/, སྤ /pa/, སྩ /t͡sa/
  • When /ra/, /la/, and /sa/ are in superscript position with /kʰa/, /t͡ʃʰa/, /tʰa/, /pʰa/ and /t͡sʰa/, they lose their aspiration and become voiced in Lhasa Tibetan, for example:
    • རྒ /ga/, རྗ /d͡ʒa/, རྡ /da/, རྦ /ba/, རྫ /dza/
    • ལྒ /ga/, ལྗ /d͡ʒa/, ལྡ /da/, ལྦ /ba/,
    • སྒ /ga/, སྡ /da/, སྦ /ba/
  • When /ra/, /la/, and /sa/ are in superscript position with the nasal consonants /ŋa/, /ɲya/, /na/ and /ma/, they receive a high tone in Lhasa Tibetan, for example:
    • རྔ /ŋa/, རྙ /ɲa/, རྣ /na/, རྨ /ma/
    • ལྔ /ŋa/
    • སྔ /ŋa/, སྙ /ɲa/, སྣ /na/, སྨ /ma/
  • When /la/ is in superscript position with /ha/, it becomes a voiceless alveolar lateral approximant in Lhasa Tibetan:
    • ལྷ /l̥a/,

Sub-joined letters

The subscript position under a radical can only be occupied by the consonants /ja/, /ra/, /la/, and /wa/. In this position they are described as བཏགས (Wylie: btags, IPA: /taʔ/), in Tibetan meaning "hung on/affixed/appended", for example བ་ཡ་བཏགས་བྱ (IPA: /pʰa.ja.taʔ.t͡ʃʰa/), except for , which is simply read as it usually is and has no effect on the pronunciation of the consonant to which it is subjoined, for example ཀ་ཝ་ཟུར་ཀྭ (IPA: /ka.wa.suː.ka/).

Vowel marks

The vowels used in the alphabet are /a/, ཨི /i/, ཨུ /u/, ཨེ /e/, and ཨོ /o/. While the vowel /a/ is included in each consonant, the other vowels are indicated by marks; thus /ka/, ཀི /ki/, ཀུ /ku/, ཀེ /ke/, ཀོ /ko/. The vowels ཨི /i/, ཨེ /e/, and ཨོ /o/ are placed above consonants as diacritics, while the vowel ཨུ /u/ is placed underneath consonants.[16] Old Tibetan included a reversed form of the mark for /i/, the gigu 'verso', of uncertain meaning. There is no distinction between long and short vowels in written Tibetan, except in loanwords, especially transcribed from the Sanskrit.

More information Vowel mark, IPA ...
Vowel mark IPA Vowel mark IPA Vowel mark IPA Vowel mark IPA
/i//u//e//o/
Close

Numerical digits

More information Devanagari numerals, Arabic numerals ...
Tibetan numerals
Devanagari numerals
Arabic numerals 0123456789
Tibetan fractions
Arabic fractions -0.50.51.52.53.54.55.56.57.58.5
Close

Punctuation marks

More information Symbol/ Graphemes, Name ...
Symbol/
Graphemes
NameFunction
༄༅། །ཡིག་མགོ
yik mgo
marks beginning of a text, before a headline, front page of a pecha
གཏེར་ཡིག་མགོ
gter yik mgo
used in place of the yik mgo in terma texts
ཡིག་མགོ་ཨ་ཕྱེད
yik mgo a phyed
used in place of the yik mgo in terma texts
དཔེ་རྙིང་ཡིག་མགོ
dpe rnying yik mgo
a variant of the yik mgo found in very old Tibetan texts
བསྐུར་ཡིག་མགོ
bskur yik mgo
list enumerator (Dzongka)
ཚེག
tseg
syllable delimiter, also used as a spacer to justify text in pechas
ཤད
shad
full stop, comma, or semicolon (marks end of a sentence or clause, and originates from the danda of Indic scripts)
། །ཉིས་ཤད
nyis shad
marks end of a paragraph or topic (cp. pilcrow)
༎ །།བཞི་ཤད
bzhi shad
marks end of a chapter or entire section
། །།གསུམ་ཤད
gsum shad
same as bzhi shad, but used when the preceding character is ཀ or ག
རིན་ཆེན་སྤུངས་ཤད
rin chen spungs shad
replaces shad after single, orphaned syllables, indicating to the reader that the preceding syllable continues from text on the previous line
ཚེག་ཤད
tsheg shad
variant of rin chen spungs shad
ཉིསཚེག་ཤད
nyis tsheg shad
variant of rin chen spungs shad
སྦྲུལ་ཤད
sbrul shad
marks the start of a new text, often in a collection of texts, separates chapters, and surrounds inserted text
གཏེར་ཤད
gter shad
replaces shad and variants thereof in terma texts
རྒྱ་གྲམ་ཤད
rgya gram shad
sometimes used in place of the yig mgo in terma texts
ཆེ་མགོ
che mgo
literally, "big head"—used preceding a reference to the Dalai Lama or the name of another important lama or tulku that demands great respect
བསྡུས་རྟགས
bsdus rtags
repetition
འཛུད་རྟགས་མེ་ལོང་ཅན
'dzud rtags me long can
caret (indicates text insertion)
ཨང་ཁང་གཡོན་འཁོར
ang khang g.yon 'khor
left roof bracket
ཨང་ཁང་གཡས་འཁོར
ang khang g.yas 'khor
right roof bracket
གུག་རྟགས་གཡོན
gug rtags g.yon
left bracket
གུག་རྟགས་གཡས
gug rtags g.yas
right bracket
Close

Extended use

Summarize
Perspective
Thumb
A text in Tibetan script suspected to be Sanskrit in content. From the personal artifact collection of Donald Weir.

The Tibetan alphabet, when used to write other languages such as Balti, Chinese and Sanskrit, often has additional and/or modified graphemes taken from the basic Tibetan alphabet to represent different sounds.

Extended alphabet

More information Letter, Used in ...
LetterUsed inRomanization & IPA
Baltiqa /qa/ (/q/)
Baltiɽa /ɽa/ (/ɽ/)
ཁ༹Baltixa /χa/ (/χ/)
ག༹Baltiɣa /ʁa/ (/ʁ/)
ཕ༹Chinesefa /fa/ (/f/)
བ༹Chineseva /va/ (/v/)
གྷSanskritgha /ɡʱ/
ཛྷSanskritjha /ɟʱ, d͡ʒʱ/
Sanskritṭa /ʈ/
Sanskritṭha /ʈʰ/
Sanskritḍa /ɖ/
ཌྷSanskritḍha /ɖʱ/
Sanskritṇa /ɳ/
དྷSanskritdha /d̪ʱ/
བྷSanskritbha /bʱ/
Sanskritṣa /ʂ/
ཀྵSanskritkṣa /kʂ/
Close
  • In Balti, consonants ka, ra are represented by reversing the letters ཀ ར (ka, ra) to give ཫ ཬ (qa, ɽa).
  • The Sanskrit retroflex consonants ṭa, ṭha, ḍa, ṇa, ṣa are represented in Tibetan by the letters ཏ ཐ ད ན ཤ (ta, tha, da, na, sha)
  • It is a classical rule to transliterate Sanskrit ca, cha, ja, jha, to Tibetan ཙ ཚ ཛ ཛྷ (tsa, tsha, dza, dzha), respectively. Nowadays, ཅ ཆ ཇ ཇྷ (ca, cha, ja, jha) can also be used.

Extended vowel marks and modifiers

More information Vowel Mark, Used in ...
Vowel MarkUsed inRomanization & IPA
Sanskritā /aː/
ཱིSanskritī /iː/
ཱུSanskritū /uː/
Sanskritai /ɐi̯/
Sanskritau /ɐu̯/
ྲྀSanskritṛ /r̩/
Sanskrit/r̩ː/
ླྀSanskrit/l̩/
Sanskrit/l̩ː/
Sanskritaṃ /◌̃/
Sanskritaṃ /◌̃/
ཿSanskritaḥ /h/
Close
More information Symbol/ Graphemes, Name ...
Symbol/
Graphemes
NameUsed inFunction
srog medSanskritsuppresses the inherent vowel sound
palutaSanskritused for prolonging vowel sounds
Close

Consonant clusters

In addition to the use of supplementary graphemes, the rules for constructing consonant clusters are amended, allowing any character to occupy the superscript or subscript position, negating the need for the prescript and postscript positions.

Romanization and transliteration

Summarize
Perspective

Romanization and transliteration of the Tibetan script is the representation of the Tibetan script in the Latin script. Multiple Romanization and transliteration systems have been created in recent years, but do not fully represent the true phonetic sound.[note 1] While the Wylie transliteration system is widely used to Romanize Standard Tibetan, others include the Library of Congress system and the IPA-based transliteration (Jacques 2012).

Below is a table with Tibetan letters and different Romanization and transliteration system for each letter, listed below systems are: Wylie transliteration (W), Tibetan pinyin (TP), Dzongkha phonetic (DP), ALA-LC Romanization (A)[18] and THL Simplified Phonetic Transcription (THL).

More information Letter, W ...
Letter W TP DP A THL Letter W TP DP A THL Letter W TP DP A THL Letter W TP DP A THL
kagkakakakhakkhakhakhaga*k*kha*ga*ga*ngangnganganga
cajcacachachaqchachachaja*q*cha*ja*ja*nyanynyanyanya
tadtatatathatthathatada*t*tha*da*da*nannanana
pabpapapaphapphaphapaba*p*pha*ba*ba*mammamama
tsaztsatsatsatshactshatshatsadza*c*tsha*dza*dza*wawwawawa
zha*x*sha*zha*zha*za*s*sa*za*za*'a-a'aayayyayaya
rarrararalallalalashaxshashashasassasasa
hahhahahaaaaaa 
* – Only in loanwords
Close

Input method and keyboard layout

Summarize
Perspective

Tibetan

Thumb
Tibetan keyboard layout

The first version of Microsoft Windows to support the Tibetan keyboard layout is MS Windows Vista. The layout has been available in Linux since September 2007. In Ubuntu 12.04, one can install Tibetan language support through Dash / Language Support / Install/Remove Languages, the input method can be turned on from Dash / Keyboard Layout, adding Tibetan keyboard layout. The layout applies the similar layout as in Microsoft Windows.

Mac OS-X introduced Tibetan Unicode support with OS-X version 10.5 and later, now with three different keyboard layouts available: Tibetan-Wylie, Tibetan QWERTY and Tibetan-Otani.

Dzongkha

Thumb
Dzongkha keyboard layout

The Dzongkha keyboard layout scheme is designed as a simple means for inputting Dzongkha text on computers. This keyboard layout was standardized by the Dzongkha Development Commission (DDC) and the Department of Information Technology (DIT) of the Royal Government of Bhutan in 2000.

It was updated in 2009 to accommodate additional characters added to the Unicode & ISO 10646 standards since the initial version. Since the arrangement of keys essentially follows the usual order of the Dzongka and Tibetan alphabet, the layout can be quickly learned by anyone familiar with this alphabet. Subjoined (combining) consonants are entered using the Shift key.

The Dzongka keyboard layout is included in Microsoft Windows, Android, and most distributions of Linux as part of XFree86.

Unicode

Summarize
Perspective

Tibetan was originally one of the scripts in the first version of the Unicode Standard in 1991, in the Unicode block U+1000U+104F. However, in 1993, in version 1.1, it was removed (the code points it took up would later be used for the Burmese script in version 3.0). The Tibetan script was re-added in July, 1996 with the release of version 2.0.

The Unicode block for Tibetan is U+0F00U+0FFF. It includes letters, digits and various punctuation marks and special symbols used in religious texts:

Tibetan[1][2][3]
Official Unicode Consortium code chart (PDF)
 0123456789ABCDEF
U+0F0x
 NB 
U+0F1x
U+0F2x
U+0F3x ༿
U+0F4x
U+0F5x
U+0F6x
U+0F7x ཿ
U+0F8x
U+0F9x
U+0FAx
U+0FBx ྿
U+0FCx
U+0FDx
U+0FEx
U+0FFx
Notes
1.^ As of Unicode version 16.0
2.^ Grey areas indicate non-assigned code points
3.^ Unicode code points U+0F77 and U+0F79 are deprecated in Unicode 5.2 and later

See also

Notes

  1. See for instance

References

Loading related searches...

Wikiwand - on

Seamless Wikipedia browsing. On steroids.