Starch gelatinization
Process of breaking down the intermolecular bonds of starch by water From Wikipedia, the free encyclopedia
Process of breaking down the intermolecular bonds of starch by water From Wikipedia, the free encyclopedia
Starch gelatinization is a process of breaking down of intermolecular bonds of starch molecules in the presence of water and heat, allowing the hydrogen bonding sites (the hydroxyl hydrogen and oxygen) to engage more water. This irreversibly dissolves the starch granule in water. Water acts as a plasticizer.
Three main processes happen to the starch granule: granule swelling, crystallite and double-helical melting, and amylose leaching.
The gelatinization temperature of starch depends upon plant type and the amount of water present, pH, types and concentration of salt, sugar, fat and protein in the recipe, as well as starch derivatisation technology are used. Some types of unmodified native starches start swelling at 55 °C, other types at 85 °C.[3] The gelatinization temperature of modified starch depends on, for example, the degree of cross-linking, acid treatment, or acetylation.
Gel temperature can also be modified by genetic manipulation of starch synthase genes.[4] Gelatinization temperature also depends on the amount of damaged starch granules; these will swell faster. Damaged starch can be produced, for example, during the wheat milling process, or when drying the starch cake in a starch plant.[5] There is an inverse correlation between gelatinization temperature and glycemic index.[4] High amylose starches require more energy to break up bonds to gelatinize into starch molecules.
Gelatinization improves the availability of starch for amylase hydrolysis. So gelatinization of starch is used constantly in cooking to make the starch digestible or to thicken/bind water in roux, sauce, or soup.
Gelatinized starch, when cooled for a long enough period (hours or days), will thicken (or gel) and rearrange itself again to a more crystalline structure; this process is called retrogradation. During cooling, starch molecules gradually aggregate to form a gel. The following molecular associations can occur: amylose-amylose, amylose-amylopectin, and amylopectin-amylopectin. A mild association amongst chains come together with water still embedded in the molecule network.
Due to strong associations of hydrogen bonding, longer amylose molecules (and starch which has a higher amylose content) will form a stiff gel. [6] Amylopectin molecules with longer branched structure, which makes them more similar to amylose, increases the tendency to form strong gels. High amylopectin starches will have a stable gel, but will be softer than high amylose gels.
Retrogradation restricts the availability for amylase hydrolysis to occur, which reduces the digestibility of the starch.
Pregelatinized starch (Dextrin) is starch which has been cooked and then dried in the starch factory on a drum dryer or in an extruder making the starch cold-water-soluble. Spray dryers are used to obtain dry starch sugars and low viscous pregelatinized starch powder.[citation needed]
A simple technique to study starch gelation is by using a Brabender Viscoamylograph.[citation needed] It is a common technique used by food industries to determine the pasting temperature, swelling capacity, shear/thermal stability, and the extent of retrogradation. Under controlled conditions, starch and distilled water is heated at a constant heating rate in a rotating bowl and then cooled down. The viscosity of the mixture deflects a measuring sensor in the bowl. This deflection is measured as viscosity in torque over time vs. temperature and recorded on the computer. The viscoamylograph allows us to observe: the beginning of gelatinization, gelatinization maximum, gelatinization temperature, viscosity during holding, and viscosity at the end of cooling.[7]
Differential scanning calorimetry (DSC) is another method industries use to examine properties of gelatinized starch. As water is heated with starch granules, gelatinization occurs, involving an endothermic reaction.[8]
The initiation of gelatinization is called the T-onset. T-peak is the position where the endothermic reaction occurs at the maximum. T-conclusion is when all the starch granules are fully gelatinized and the curve remains stable.
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.
