Loading AI tools
Knot used to join two ropes From Wikipedia, the free encyclopedia
The simple Simon over bend is a knot belonging to the category bend. The simple Simon under holds well even with slippery synthetic ropes,[1] but is less secure than the similar simple Simon under.[2]
Simple Simon Over | |
---|---|
![]() | |
Category | Bend |
Efficiency | high |
Origin | Harry Asher, published in 1989 |
Related | simple Simon under bend, simple Simon symmetric bend, simple Simon double bend, sheet bend |
Releasing | Fair |
Typical use | suitable for dissimilar ropes, works well with synthetic ropes. |
The difference is just whether the green working end goes over the green standing (loaded) end (Simple Simon over) or under the green standing (loaded) end (simple Simon under).
It was invented by the prolific Dr. Harry Asher[3] and published in 1989.[4]
When I had decided that the way to try for new bends was to think of the two halves separately, and then decide how to put them together. There seemed to be no better way than to start with the two halfs that make up the famous Sheet bend ... an open loop and a single hitch.
— Dr. Harry Asher: The Alternate Knot Book[5]
Tie as shown in the images. In the sheet bend, the two running ends should emerge on the same side of the knot.[7]
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.