The Pobjoy Niagara is a British seven-cylinder, air-cooled, radial, aero-engine first produced in 1934. The design ran at higher speeds than conventional engines, and used reduction gearing to lower the speed of the propeller. This led to a noticeable off-centre mounting for the propeller. The Niagara was a popular engine for light and experimental aircraft,[1] well regarded due to its small diameter, smooth operation, low noise and innovative engineering.
Bore/stroke 77 x 87 mm (3.03 x 3.43 in), swept volume 2,835 cc (173 cu in). Compression 6.25:1, gearing 0.47:1. Normal continuous power 84 hp (63 kW) at 3,200 rpm at sea level.[2]
Niagara II
Bore/stroke 77 x 87 mm (3.03x3.43 in), swept volume 2,835 cc (173 cu in). Compression 6.0:1, gearing 0.39:1. Normal continuous power 84 hp (63 kW) at 3,200 rpm at sea level.[2]
Niagara III
Bore/stroke 77 x 87 mm (3.03x3.43 in), swept volume 2,835 cc (173 cu in). Gearing 0.47:1. Normal continuous power 88 hp (66 kW) at 3,300 rpm at sea level.[2]
Niagara IV
Similar to Niagara III but with a higher operating rpm. Normal continuous power 98 hp (73 kW) at 3,500 rpm at sea level.[2]
Niagara V
Larger version of the basic Niagara. Bore/stroke 81 x 87 mm (3.19 x 3.43 in), swept volume 3,138 cc (191.5 cu in). Compression 8.0:1, gearing 0.47:1. Normal continuous power 125 hp (93 kW) at 4,000 rpm at sea level.[2][3]
Cataract I-III
De-rated, uncowled versions of Niagara I-III with simple inter-cylinder baffles for cooling and trickle-down lubrication for lower exhaust rockers. Compression 5.7:1, gearing 0.47:1.[2][3][4]
Cascade
Direct drive version of Cataract I. Normal continuous power 66 hp (49 kW) at 2,100 rpm.[4]
A Pobjoy Niagara powered Comper Swift G-ACTF that is owned and operated by The Shuttleworth Collection, Old Warden remains airworthy in 2017 and displays to the public at home airshows during the flying season.[5]
