Loading AI tools
Type of aircraft From Wikipedia, the free encyclopedia
The PWS-1 was a Polish two-seat fighter and reconnaissance aircraft constructed by Podlaska Wytwórnia Samolotów (PWS) in 1927. It remained a prototype for its entire lifespan.
| PWS-1 | |
|---|---|
| |
| PWS-1 | |
| Role | Fighter aircraft |
| Manufacturer | Podlaska Wytwórnia Samolotów |
| Designer | Zbysław Ciołkosz, Aleksander Grzędzielski |
| First flight | 25 April 1927 |
| Retired | 1929 |
| Status | prototype |
| Primary user | Polish Air Force |
| Number built | 1 |
The PWS-1 was the first aircraft design produced by the Podlaska Wytwórnia Samolotów (Podlasie Aircraft Factory), and the second aircraft designed and built in Poland, after the CWL WZ-X. It was conceived as a single-engine high-wing two-seat fighter whose main purpose was to escort bombers. The design was produced in 1926 by Zbysław Ciołkosz and Aleksander Grzędzielski under the direction of Stanisław Cywiński.
After static testing, the prototype first flew on 25 April 1927 in Biała Podlaska. Although it had STOL capability, its maximum speed and maneuverability were low due to its thick wings.
In 1928, the aircraft was reworked, receiving a new lighter-weight, straight wing with a thinner profile and duralumin construction instead of a wooden, slightly swept one. It also received a large rectangular vertical stabilizer with a rounded top. After these modifications were made, the plane was again tested in early 1929 under the designation PWS-1bis. Its performance improved, but because of its relatively low speed compared to other fighters, its primary role was changed to reconnaissance. However, development was discontinued because the plane had a small payload and Poland had recently bought a large number of better Breguet 19 and Potez 25 reconnaissance and bomber aircraft.
The PWS-1 was a high-wing parasol braced monoplane of mixed construction, featuring a single engine. It sported a fuselage with a steel frame in front and wooden frame in the rear covered with canvas and duralumin in the engine section. Its wing was slightly swept, two spar, and wooden, and was covered with plywood and canvas. The PWS-1bis had a straight, trapezoidal duralumin wing that was two-spar and also covered with plywood and canvas.
Both versions featured wooden stabilizers, rudders and elevators, all covered in canvas, and an open pilot's cab with a windshield. Behind the pilot's cab was an open observer's cab with two 7.7 mm Lewis machine guns on a ring mount. The two cabs featured twin controls. The pilot manned two 7.7 mm Vickers machine guns fixed in the fuselage through an interrupter gear. The plane featured a conventional fixed landing gear with a rear skid.
The PWS-1's engine was a Lorraine-Dietrich 12Eb water-cooled inline W-12 built in the Polish Skoda Works. The water radiator was located in front of the engine.
Acceleration was provided through a two-blade wooden propeller of a fixed pitch.
A 375 liter fuel tank was located in the front fuselage. It could be jettisoned in an emergency situation.
Data from Jane's all the World's Aircraft 1928,[1] Polish Aircraft 1893–1939[2]
General characteristics
Performance
Armament
2 x fixed forward firing synchronised 7.7 mm (0.303 in) Vickers machine guns; 2 x flexibly mounted 7.7 mm (0.303 in) Lewis machine guns in the rear cockpit
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.
