Loading AI tools
Form of fungus From Wikipedia, the free encyclopedia
Mildew is a form of fungus. It is distinguished from its closely related counterpart, mold, largely by its colour: molds appear in shades of black, blue, red, and green, whereas mildew is white. It appears as a thin, superficial growth consisting of minute hyphae (fungal filaments) produced especially on living plants or organic matter such as wood, paper or leather.[1][2] Both mold and mildew produce distinct offensive odours, and both have been identified as the cause of certain human ailments.
In horticulture, mildews are species of fungus in the order Erysiphales, or fungus-like organisms in the family Peronosporaceae. It is also used more generally to mean mold growth. In Old English, mildew meant honeydew (a substance secreted by aphids on leaves, formerly thought to distill from the air like dew), and later came to mean mold or fungus.[3]
The term mildew is often used generically to refer to mold growth, usually with a flat growth habit. Molds can thrive on many organic materials, including clothing, leather, paper, and the ceilings, walls and floors of homes or offices with poor moisture control. Mildew can be cleaned using specialized mildew remover, or substances such as bleach (though they may discolour the surface).[4]
There are many species of mold. The black mold which grows in attics, on window sills, and other places where moisture levels are moderate often is Cladosporium. Colour alone is not always a reliable indicator of the species of mold. Proper identification requires a microbiologist or mycologist. Mold growth found on cellulose-based substrates or materials where moisture levels are high (90 per cent or greater) is often Stachybotrys chartarum. "Black mold," also known as "toxic black mold", properly refers to S. chartarum. This species is commonly found indoors on wet materials containing cellulose, such as wallboard (drywall), jute, wicker, straw baskets, and other paper materials. S. chartarum does not, however, grow on plastic, vinyl, concrete, glass, ceramic tile, or metals. A variety of other mold species, such as Penicillium or Aspergillus, may appear to grow on non-cellulosic surfaces but are actually growing on the biofilm that adheres to these surfaces. Glass, plastic, and concrete provide no food for organic growth and as such cannot support mold or mildew growth alone without biofilm present. In places with stagnant air, such as basements, molds can produce a strong musty odour.[5]
The pink "mildew" often found on plastic shower curtains and bathroom tile is a red yeast, Rhodotorula.
Mildew requires certain factors to develop. Without any one of these, it cannot reproduce and grow. The requirements are a food source (any organic material), sufficient ambient moisture (a relative humidity of 62–93%), and reasonable warmth (77–88 °F or 25–31 °C) is optimal. Still, some growth can occur anywhere between freezing and 95 °F (35 °C). Slightly acidic conditions are also preferred.[6] At warmer temperatures, air can hold a greater volume of water; as air temperatures drop, so does the ability of air to hold moisture, which then tends to condense on cool surfaces. This can work to bring moisture onto surfaces where mildew is then likely to grow (such as an exterior wall).
Preventing the growth of mildew therefore requires a balance between moisture and temperature. This can be achieved by minimizing the moisture available in the air.
Air temperatures at or below 70 °F (21 °C) will inhibit growth, but only if the relative humidity is low enough to prevent water condensation (i.e., the dew point is not reached).
With warmer temperatures, the water holding capacity of the air increases.[7]: 6 This means that if the amount of water vapour in the warming air remains the same, the air will become drier (i.e. it has a lower relative humidity). This again inhibits fungal growth. However, warm, growth-favoring temperatures coupled with high relative humidity will support mildew growth.
Air conditioners are one effective tool for removing moisture and heat from otherwise humid warm air. The coils of an air conditioner cause moisture in the air to condense on them, eventually losing this excess moisture through a drain and placing it back into the environment. They can also inhibit mildew growth by lowering indoor temperatures. For them to be effective, air conditioners must recirculate the existing indoor air and not be exposed to warm, humid outside air. Some energy efficient air conditioners may cool a room so quickly that they do not have an opportunity to also effectively collect and drain significant ambient water vapour.[6]
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.
