List of software-defined radios

This article provides a list of commercially available software-defined radio receivers.

Name	Unit cost (2024)	Type	Production status	Frequency range	Max bandwidth	RX ADC bits	TX DAC bits	TX capable	Sampling rate	Frequency accuracy ppm	Panadapters / Receivers	Host Interface	Windows	Linux	Mac	FPGA
Aaronia SPECTRAN V6 ECO[1]	€2,498 EUR	Pre-built	Active	9 kHz – 8 GHz	Up to 120 MHz (2 Rx with 60 MHz each)	16	14	Yes	2 GSPS	0.005 (OCXO option)	2/1	Embedded or True IQ data via 1 x USB 3.1 GEN 1. Internet remote via HTTP / JSON	Yes	Yes	No	1 x XC7A200T-2 (930 GMACs)
Aaronia SPECTRAN V6 PLUS[2]	€9,998 EUR	Pre-built	Active	10 MHz – 8 GHz (planned modules for 9 kHz – 26 GHz; 9 kHz – 55 GHz, and 9 kHz – 70 GHz)	Up to 490 MHz (2 Rx with 245 MHz each)	16	14	Yes	2 GSPS	0.005 (OCXO option)	2/1/3	Embedded or True IQ data via 1 x or 2 x USB 3.0. Optional 1 x USB 3.1 GEN2 (power only). Internet remote via HTTP / JSON	Yes	Yes	No	1 x XC7A200T-2 (930 GMACs)
Aaronia SPECTRAN V6 Command Center[3]	€24,980 EUR	Pre-built	Active	10 MHz – 8 GHz (planned extensions for 9 kHz – 26 GHz; 9 kHz – 55 GHz, and 9 kHz – 70 GHz)	Up to 980 MHz (4 Rx with 245 MHz each)	16	14	Yes	8 GSPS	0.005 (OCXO option)	8/4/12	Full IQ and/or Spectra data rate streaming. Fixed Workstation/PC integration.	Yes	Yes	No	4 x XC7A200T-2 (930 GMACs each)
Aaronia SPECTRAN V6 ENTERPRISE[4]	€59,980 EUR	Pre-built	Active	10 MHz – 8 GHz (planned extensions for 9 kHz – 26 GHz; 9 kHz – 55 GHz, and 9 kHz – 70 GHz)	Up to 3000 MHz (12 Rx with 245 MHz each)	16	14	Yes	24 GSPS	0.005 (OCXO option)	24/12/36	Full IQ and/or Spectra data rate streaming. Remote via 2 x 100 GbE.	Yes	Yes	No	12 x XC7A200T-2 (930 GMACs each)
ADAT ADT-200A[5]		Pre-built	Discontinued	10 kHz – 30 MHz (planned modules for 50 – 54 MHz, 70.0 – 70.5 MHz, and 144 – 148 MHz)	0.5 – 100 kHz	?			?		1/3	Embedded system (no computer needed), USB, Internet remote	Yes, with option R-1 & ADAT Commander	?	?
AD-FMCOMMS2-EBZ[6][7][8]		Pre-built	Active	2.4 – 2.5 GHz		12	12	Yes	61.44 MSPS		2/2	FMC (to Xilinx board) then USB 2.0 or Gigabit Ethernet.	Yes	Yes	Yes
AD-FMCOMMS3-EBZ[9][10][8]		Pre-built	Active	70 MHz – 6 GHz	54 MHz due to filter	12	12	Yes	61.44 MSPS		2/2	FMC (to Xilinx board) then USB 2.0 or Gigabit Ethernet.	Yes	Yes	Yes
AD-FMCOMMS4-EBZ[11][12][8]		Pre-built	Active	70 MHz – 6 GHz	54 MHz due to filter	12	12	Yes	61.44 MSPS		1/1	FMC (to Xilinx board) then USB 2.0 or Gigabit Ethernet.	Yes	Yes	Yes
AD-FMCOMMS5-EBZ[13][14][8]		Pre-built	Active	70 MHz – 6 GHz	54 MHz due to filter	12	12	Yes	61.44 MSPS		4/4	FMC (to Xilinx board) then USB 2.0 or Gigabit Ethernet.	Yes	Yes	Yes
ADALM-PLUTO[15]		Pre-built	Active	325 MHz – 3.8 GHz (70 MHz – 6 GHz with software modification[16])	20 MHz (streaming may be less due to USB 2.0)	12	12	Yes	61.44 MSPS		1/1	USB 2.0, Ethernet & WLAN with USB-OTG adapter	Yes	Yes	Yes	Xilinx Zynq Z-7010
AFEDRI SDR[17]		Pre-built	Active	30 kHz – 35 MHz, 35 MHz – 1700 MHz	2.3 MHz	12		No	80 MSPS		0/2	USB 2.0, 10/100 Ethernet	Yes	Yes	Yes
AirSpy R2[18]		Pre-built	Active	24 – 1700 MHz	10 MHz	12	N/A	No	10 MSPS MSps ADC sampling, up to 80 MSPS for custom applications	0.5	0/1	USB	Yes	Yes	Yes using ports	none
AirspyHF+[19]		Pre-built	Active	9 kHz - 31 MHz 60 MHz - 260 MHz	660 kHz	18	N/A	No	36 MSPS	0.5	0/1	USB	Yes	Yes	Yes
Antsdr[20]		Pre-built	Active	325MHz – 3.8GHz(ad9363) 70MHz – 6GHz (ad9631)	200kHz-20MHz(ad9363) 200kHz-56MHz (ad9361)	12	12	Yes	61.44 MSPS	-+2	1/1	USB 2.0 serial/console/power, Gigabit Ethernet, microSD	No	(ubuntu, maybe debian)	No	Xilinx Zynq Z-7020
Apache Labs ANAN-10E[21]		Pre-built		10 kHz – 55 MHz		14	?	Yes 10 W	122.88 Msps		0/2	Gigabit Ethernet	Yes	Yes	Yes
Apache Labs ANAN-10/100		Pre-built		10 kHz – 55 MHz		16	?	Yes 10/100 W	122.88 Msps		0/4	Gigabit Ethernet	Yes	Yes	Yes
Apache Labs ANAN-100D/200D		Pre-built		10 kHz – 55 MHz		16	?	Yes 100 W	122.88 Msps		0/7	Gigabit Ethernet	Yes	Yes	Yes
Apache Labs ANAN-7000DLE[22]		Pre-built		9 kHz – 60 MHz		16	16	Yes 100 W	?		0/7	Gigabit Ethernet	Yes	Yes	Yes
Apache Labs ANAN-8000DLE [23]		Pre-built		0 - 61.44 MHz		16	16	Yes 200 W	?		0/7	Gigabit Ethernet	Yes	Yes	Yes	Altera Cyclone IV
AOR AR-2300[24]		Pre-built		40 kHz – 3.15 GHz		?	N/A	No	65 MSPS		1/1	Embedded system (no computer needed), USB	Yes	?	?
ARSP / Wideband MIMO[25][26]		early kit / pre-built		400 MHz – 4.4 GHz		?	?		8 MHz streaming / 50 MHz		?	USB 2.0	Yes	Yes	No
ASR-2300[27]		Pre-Built / Open Source Design		300 MHz – 3.8 GHz, two general wideband RX and selectable GPS, ISM, PCS, UHF RX bands		?	?		<40 MHz (Programmable)		0/2	USB 3.0 SuperSpeed	Yes	Yes	Yes
Bitshark Express RX[28]		Kit		300 MHz – 4 GHz		?			105 MSPS (RX only)		0/1 ?	PCIe	Yes	Yes	?
bladeRF[29]		Pre-built		300 MHz – 3.8 GHz	28 MHz	12	12	Yes	80 kSPS – 40 MSPS	1	?	USB 3.0 SuperSpeed	Yes	Yes	Yes	Altera Cyclone 4 E
bladeRF 2.0 micro[30]		Pre-built		47 MHz – 6 GHz	56 MHz	12	12	Yes	61.44 MSPS		2/2	USB 3.0 SuperSpeed	Yes	Yes	Yes	Altera Cyclone V
CaribouLite[31]		Pre-built		30 MHz – 6 GHz	2.5 MHz	13	13	Yes	4 MSPS		1/1	Raspberry Pi 40-pin header	No	Yes	No
ColibriDDC[32]		Pre-built		10 kHz – 62.5 MHz, up to 800 MHz (oversampling)	38 – 312 kHz	14	N/A	No	125 MSPS		3/4	10/100 Ethernet	Yes	Yes	?
COM-3011[33]		Pre-built		20 MHz – 3 GHz		ext		No	External ADC required (I/Q output)		?	USB	Yes	?	?
Crimson TNG[34]		Pre-built		DC – 6 GHz	> 1200 MHz (4 independent RX chains and 4 independent TX chains, each capable of up to 322 MHz of RF bandwidth)	16	16	Yes	Four dual channel, 16 bit, 370 MSPS ADCs Two quad channel, 16 bit, 2500 MSPS DACs		4/4	2x 10Gbit/s SFP+, Ethernet	Yes	Yes	Yes
Cross Country Wireless SDR receiver v. 3[35]		Pre-built		472 – 479 kHz, 7.0–7.3 MHz/10.10–10.15 MHz, and 14.00–14.35 MHz		ext		No	External ADC required (I/Q output)		1/1	Crystal controlled two channels	Yes	Yes	Yes
Cyan[34]		Pre-built		100 kHz – 18 GHz	1 – 3 GHz (8 fully independent Rx chains and 8 fully independent Tx chains, each capable of up to 1 GHz of RF bandwidth)	16	16	Yes	1–3 GSPS ADCs 2.5 GSPS DACs		1 – 16 receive and 1 – 16 transmit (total of 16 radio chains)	4x 40Gbit/s QSFP, Ethernet	Yes	Yes	Yes	Intel Stratix 10 SoC
DRB 30[36]		Pre-built		30 kHz – 30 MHz		ext			External ADC required (I/Q output)		?	LPT parallel port	Up to XP	?	?
DX Patrol[37]		Pre-built		100 kHz – 2 GHz (RTL2832U, R820T, 40 MHz upconverter)		8		No	2.4 (up to 3.2) Msps		?	USB	Yes	?	?
easySDR USB Dongle[38]		Pre-built		64 – 1700 MHz		?	N/A	No	48, 96 kHz		0/1	USB	Yes	No	No
Elektor SDR[39]		Bare PCB and pre-built		150 kHz – 30 MHz		?		No	Soundcard ADC: 48, 96, and 192 kHz		0/1	USB	Yes	Yes	Yes
Elektor AVR SDR[40]		Kit and pre-built		up to 1 MHz in undersampling		?			up to 15  kS/s		0/1	UART via RS2-232 converter or USB bridge	Yes	Yes	Yes
ELAD FDM-S1[41]		Pre-built		20 kHz – 30 MHz, up to 200 MHz in undersampling	192 – 3072 kHz	14	N/A	No	61.44 MHz		1/4	USB	Yes	No	No	Xilinx
ELAD FDM-S2[42]		Pre-built		HF:9 kHz – 52 MHz / FM:74 MHz - 108 MHz / VHF:135 MHz - 160 MHz	192 kHz – 6 MHz	16	N/A	No	122.88 MHz		1/8	USB 2.0	Yes	No	No	Xilinx Spartan-6
ELAD FDM-S3[43]		Pre-built		9 kHz – 500 MHz	192 kHz – 24.576 MHz	16	N/A	No	122.88 MHz/98.304 MHz			USB 3.0	Yes	No	No	?
ELAD FDM-DUO[44]		Pre-built		10 kHz – 54 MHz (experimental up to 165 MHz)	192 kHz – 6 MHz	16	?	Yes	122.88 MHz		1/8+1	Embedded system + 3x USB 2.0	Yes	No	No	Xilinx Spartan-6
Elecraft KX3[45]		Pre-built or kit		0.5 – 54 MHz (144–148 MHz optional)		14	?	Yes	30 kHz?		0/1	USB or embedded system (no computer needed)	Yes	Yes	Yes
FiFi-SDR[46]		Pre-built		200 kHz – 30 MHz		?		No	96 kHz (integrated soundcard)		0/1	USB	Yes	Yes	?
FLEX-6700[47]		Pre-built		0.01 – 73, 135 – 165 MHz	24–192 kHz RX (x8), 14 MHz Display (x8)	16	16	Yes 100 W	245.76 MSPS		8/8	Gigabit Ethernet	Yes	Yes	Yes	Xilinx XC6VLX130T
CDRX-3200[48]		Pre-built		0.01 – 100 MHz	48 – 250 kHz RX (x32)	24	—	No	48-250 kSPS		0/32, coherent or independent	Gigabit Ethernet	Yes through API	Yes through API	Yes through API	Xilinx XC5VLX30T
LBRX-24[49]		Pre-built		950 – 2150 MHz	150 kHz – 80 MHz (x24)	16	—	No	150 kSPS – 80 MSPS		0/24	10 Gigabit Ethernet (x4)	Yes through API	Yes through API	Yes through API	Xilinx XC6VHX380T (x2)
ML-9600 with MIL-STD-188-110D data to 24kHz[50]		Pre-built		0.01 – 54 MHz	24 – 3072 kHz RX (x4), 14 MHz Display (x4)	16	16	Yes	245.76 MSPS	5x10^-13 (with GPSDO)	4/4	Gigabit Ethernet	Yes	Yes	Yes	Xilinx XC7A200T-2
ML-9600W with MIL-STD-188-110D data to 48kHz[50]		Pre-built		0.01 – 54 MHz	24 – 3072 kHz RX (x4), 14 MHz Display (x4)	16	16	Yes	245.76 MSPS	5x10^-13 (with GPSDO)	4/4	Gigabit Ethernet	Yes	Yes	Yes	Xilinx XC7A200T-2
FLEX-6700R[47]		Pre-built		0.01 – 73, 135 – 165 MHz	24 – 192 kHz RX (x8), 14 MHz Display (x8)	16		No	245.76 MSPS (receiver)	5x10^-13 (with GPSDO)	8/8	Gigabit Ethernet	Yes	Yes	Yes	Xilinx XC6VLX130T
FLEX-6600M[51]		Pre-built		0.01 – 54 MHz	24 – 192 kHz RX (x4), 14 MHz Display (x4)	16	16	Yes 100 W	245.76 MSPS	5x10^-13 (with GPSDO)	4/4	Gigabit Ethernet	Yes	Yes	Yes	Xilinx XC6VLX130T or XC7A200T
FLEX-6600[51]		Pre-built		0.01 – 54 MHz	24 – 192 kHz RX (x4), 14 MHz Display (x4)	16	16	Yes 100 W	245.76 MSPS	5x10^-13 (with GPSDO)	4/4	Gigabit Ethernet	Yes	Yes	Yes	Xilinx XC6VLX130T or XC7A200T
FLEX-6500[52]		Pre-built		0.01 – 73 MHz	24 – 192 kHz RX (x4), 14 MHz Display (x4)	16	16	Yes 100 W	245.76 MSPS	5x10^-13 (with GPSDO)	4/4	Gigabit Ethernet	Yes	Yes	Yes	Xilinx XC6VLX75T
FLEX-6400M[53]		Pre-built		0.01 – 54 MHz	24 – 192 kHz RX (x2), 7 MHz Display (x2)	16	16	Yes 100 W	122.88 MSPS	5x10^-13 (with GPSDO)	2/2	Gigabit Ethernet	Yes	Yes	Yes	Xilinx XC6VLX75T or XC7A200T
FLEX-6400[53]		Pre-built		0.01 – 54 MHz	24 – 192 kHz RX (x2), 7 MHz Display (x2)	16	16	Yes 100 W	122.88 MSPS	5x10^-13 (with GPSDO)	2/2	Gigabit Ethernet	Yes	Yes	Yes	Xilinx XC6VLX75T or XC7A200T
FLEX-6300[54]		Pre-built		0.01 – 54 MHz	24 – 192 kHz RX (x2), 14 MHz Display (x2)	16	16	Yes 100 W	122.88 MSPS		2/2	Gigabit Ethernet	Yes	Yes	Yes	—
FLEX-5000A		Pre-built		0.01 – 65 MHz	48 – 192 kHz (x2)	24	24	Yes 100 W	48, 96, 192 kHz		2/2	1394a Firewire	Yes	No	No	—
FLEX-3000		Pre-built		0.01 – 65 MHz	48 – 96 kHz	24	24	Yes 100 W	48, 96 kHz		1/1	1394a Firewire	Yes	No	No	—
FLEX-1500[55]		Pre-built		0.01 – 54 MHz	48 kHz	16	16	Yes 5 W	48 kHz		1/1	USB	Yes	No	No	—
FreeSRP		Pre-built (OSHW)		70 – 6000 MHz	61.44 MHz	12	?	Yes	61.44 Msps		1/1	USB 3.0	?	?	?
FUNcube Dongle[56]		Pre-built		64 – 1700 MHz		16		No	96 kHz[57]		0/1	USB	Yes	Yes	Yes
FUNcube Dongle Pro+[56]		Pre-built		0.15 – 240 MHz, 420 – 1900 MHz		16		No	192 kHz		0/1	USB	Yes	Yes	Yes
HackRF One[58]		Pre-built		1 MHz – 6 GHz	20 MHz	8	8	Yes	8 – 20 Msps	20	0/1	USB 2.0	Yes	Yes	Yes
Hermes-Lite2 (build9)[59]		experimental kit		0 to 38.4 MHz	1.536 MHz	12 bits @ 76.8 MHz	12 bits @ 153.6 MHz	Yes	76.8 MSPS	0.5 ppm	4 / 4 + 1	Ethernet	Yes	Yes	Yes	Altera Cyclone IV
HiQSDR[60]		prebuilt modules & kits, pcbs		30 kHz – 62 MHz		?			48 – 960 kHz		?	10/100 Ethernet	Yes	Yes	Yes
HobbyPCB RS-HFIQ[61]		Pre-built		3 MHz – 30 MHz	Up to 250 kHz depending on Sound Card	?	?	Yes 5 W	Depends on Sound Card		2/1 Using HDSDR software	Relies on a computing asset with sound device to process I and Q input and output	Yes, HDSDR, PowerSDR	Yes, Quisk, Linrad, GNU Radio	Yes, various software
Hunter SDR[62]		Kit		2.5 – 30 MHz (1 – 30 MHz typ.)		ext			External ADC required (I/Q output)		?	USB	Yes	No	No
Icom IC-7610[63]		Pre-built		RX: 0.030 - 60 MHz. TX: differs between regional models.		16	14	Yes	130 MHz[64]		2/2	USB 2.0 Ethernet
Iris-030[65]		Pre-built		50 MHz – 3.8 GHz	122.88 MHz	12	12	Yes	122.88 Msps (SISO) 61.44 Msps (MIMO)		2/2	Gigabit Ethernet or 24.6 Gbit/s High-Speed Bus	Yes	Yes	Yes	Xilinx Zynq 7030
ISDB-T 2035/2037[66]		Pre-built		50 – 960 MHz	8 MHz	?		No	0.5-12 MS/s		0/1	USB	Yes	Yes	Yes
Kanga Finningley[67]		Kit		3.750 MHz ± 48 kHz		ext		No	External ADC required (I/Q output)		?	None	Yes	Yes	Yes
KerberosSDR (4x coherent RTL-SDR's)[68]		Pre-built		24 MHz - 1.7 GHz	4 times the sample rate	8		No	2.4 Msps (can go up to 3.2 Msps but drops samples)	<1ppm	4/4	USB	Yes	Yes	Yes
LimeSDR[69]		Pre-built (full Open Source/Hardware)		100 kHz – 3.8 GHz	61.44 MHz (120 MHz internally)	12	?	Yes	61.44 Msps	2.5	2/2	USB 3.0, PCIe	Yes	Yes	Yes	Altera Cyclone IV
LimeSDR Mini[70]		Pre-built (full Open Source/Hardware)		10 MHz – 3.5 GHz	30.72 MHz	12	?	Yes	30.72 Msps	2.5	1/1	USB 3.0, PCIe	Yes	Yes	Yes	Altera MAX 10
LimeSDR Mini 2.0[71]		Pre-built (full Open Source/Hardware)		10 MHz – 3.5 GHz	30.72 MHz	12	?	Yes	30.72 Msps	2.5	1/1	USB 3.0, PCIe	Yes	Yes	Yes	Lattice ECP5
LD-1B[72]		Pre-built		100 kHz – 30 MHz		ext			External ADC required (I/Q output)		?	USB	Yes	?	?
Lunaris-SDR[73]		Pre-built		10 kHz – 55 MHz		?		Yes	122.88 Msps		0/4	Gigabit Ethernet	Yes	Yes	Yes
Matchstiq[74]		Pre-built		300 MHz – 3.8 GHz		?	?		40 MSPS (RX/TX)		?	Embedded System or USB	Yes	Yes	Yes	Xilinx Spartan 6
MB1[75]		Pre-built		10 kHz – 160 MHz	38 – 312 kHz	16	14	Yes	160 MSPS (RX), 640 MSPS (TX)		3/4	10/100 Ethernet, WLAN (optional)	Yes	Yes	?
Mercury[76]		Pre-built		0.1 – 55 MHz		16			122.88 MSPS		0/7	USB (via Ozy) or Ethernet (via Metis)	Yes	Yes	Yes
Myriad-RF 1[77]		Pre-built		300 MHz – 3.8 GHz		?			Programmable (16 selections); 0.75 – 14 MHz, Bypass mode		1/1	standard connector FX10A-80P	Yes	Yes	Yes	none
NooElec NESDR SMArt[78]		Pre-built		25 – 1750 MHz	2.4 MHz nominal, and 3.2 MHz max.	8	NA	No	480 MSPS without dropping any samples	0.5 ppm		USB 2.0	Yes	Yes	Yes	None
NetSDR[79]		PnP		0.1 kHz – 34 MHz		?		No	80.0 MHz		0/1 ?	Ethernet	Yes	Yes	Yes
Noctar[80]		Pre-built PCIe card		100 kHz – 4 GHz	200 MHz	?			?		?	PCI Express ×4	No	Yes	No
Odyssey TRX[81]		Pre-built		0.5 – 55 MHz		?		Yes	122.880 MSps ADC sampling, 48k-960k output samplrate		2/2	LAN, WiFi, USB	Yes	Yes	Yes	Altera Cyclone IV
Perseus[82]		Pre-built		10 kHz – 40 MHz (87.5–108 MHz using FM down-converter)	1.6 MHz	16		No	80 MS/s (16 bit ADC)		?	USB 2.0	Yes	Yes [83]	?
Pappradio[84]		Pre-built		150 kHz – 30 MHz (210 MHz using harmonics)		ext			External ADC required (I/Q output)		?	USB	Yes	Yes	?
PCIe SDR MIMO 2x2[85]		Pre-built		70 MHz – 6 GHz		?			61.44 Msps		2/2	PCIe (1x)	No	Yes	No
PM-SDR[86]		Pre-built		100 kHz – 50 MHz (up to 165 MHz using harmonics)	192 kHz	ext		No	External ADC required (I/Q output)		?	USB	Yes	Yes	?
PrecisionWave Embedded SDR[87]		Pre-built / Customizable Frontends		1 MHz – 9.7 GHz (depending on frontend)	2x RX: 155 MHz 2x TX: 650 MHz 2x2 MIMO Audio: up to 320 kbit/s	?		Yes	310 MSPS		2	Embedded System Gigabit Ethernet / USB / JTAG / Audio	Yes	Yes	Yes	Xilinx Zynq Z-7030
QS1R[88]		Pre-built		10 kHz – 62.5 MHz (up to 500 MHz using images/alias)		16		No	125 MHz		1/2-4	USB	Yes	Yes	Yes	Altera Cyclone III
Quadrus (DRU-244A and SRM-3000)[89]		Pre-built		0.1 – 440 MHz		?		No	80 MSps ADC sampling, 48k-1.536M output samplrate		0/16	PCI	Yes	Yes	Yes
Radioberry		experimental kit		0 to 38.4 MHz	4x RX 48K	12 bits @ 76.8 MHz		Yes	76.8 MSPS			Ethernet	Yes	Yes	Yes	Altera Cyclone 10LP
Realtek RTL2832U DVB-T tuner[90][91][92]		Pre-built with custom driver		24 – 1766 MHz (R820T tuner) (sensitivity drops off considerably outside this range, but can go 0–2,200 MHz (E4000 tuner with direct sampling mod) )	Matches sampling rate, but with filter roll-off	8		No	2.8 MHz (can go up to 3.2 MHz but drops samples)		?	USB	Yes	Yes	Yes
Red Pitaya SDRlab122-16[93]		Pre-built		2 RX + 2TX 300 kHz - 60 MHz (500 MHz bw with undersampling)	500 MHz	16 bit @ 122MSPS	14 bit @ 122MSPS	Yes	122.88 MSPS	up to 12		Gbit Ethernet and optional WiFi	Yes	Yes	Yes	Xilinx Zynq Z-7020
RDP-100[94]		Pre-built		RX, 0 – 125 MHz; TX, 0–200 MHz		?		Yes	RX: 250 MSPS TX - 800 MSPS		?	Embedded System	No	No	No
RTL-SDR V3 Receiver Dongle (hardware modded R820T2/RTL2838U DVB-T Tuner Dongles)[95]		Pre-built and pre-modded with custom driver		0.5 – 1766 MHz (mod: RTL2832U Q-branch pins soldered to antenna port)[96]	Matches sampling rate, but with filter roll-off	8		No	2.4 MHz (can go up to 3.2 MHz but drops samples)	1	?	USB	Yes	Yes	Yes
SDRplay: RSP1A[97]		Pre-built		1 kHz – 2 GHz	10 MHz	14<2 MHz 12<8 MHz 10<9.216 MHz 8>9.216 MHz		No	20 MSPS with 11 built-in preselection filters	0.5	1/1	USB 2.0	Yes	Yes	Yes	none
SDRplay: RSP1B[98]		Pre-built		1 kHz – 2 GHz	10 MHz	14<2 MHz 12<8 MHz 10<9.216 MHz 8>9.216 MHz		No	20 MSPS with 11 built-in preselection filters	0.5	1/1	USB 2.0	Yes	Yes	Yes	none
SDRplay: RSPdx[99]		Pre-built		1 kHz – 2 GHz	10 MHz	14<2 MHz 12<8 MHz 10<9.216 MHz 8>9.216 MHz		No	20 MSPS with 12 built-in preselection filters and 3 antenna ports	0.5	1/1	USB 2.0	Yes	Yes	Yes	none
SDRplay: RSPduo[100]		Pre-built		1 kHz – 2 GHz	10 MHz	14<2 MHz 12<8 MHz 10<9.216 MHz 8>9.216 MHz		No	Two independent tuners, each with 11 built-in preselection filters. 3 antenna ports	0.5	2/2	USB 2.0	Yes	Yes	Yes	none
Soft66AD / Soft66ADD / Soft66LC4 / Soft66RTL[101]		Pre-built		0.5 – 70 MHz		ext		No	External ADC required (I/Q output)		0/1	USB	Yes	Unofficially	?
SDR-IQ[102]		PnP		0.1 kHz – 30 MHz		?			66.666 MHz		1/1 ?	USB	Yes	Yes	Yes
SDR-IP[103]		PnP		0.1 kHz – 34 MHz		?			80.0 MHz		1/1 ?	Ethernet	Yes	Yes	Yes
SDR-LAB SDR04[104]		Pre-built		0.4 – 4 GHz		?			40 MHz		?	USB 3.0 SuperSpeed	Yes	Yes	Yes
SDRX01B[105]		Pre-built and kit option		50 kHz – 200 MHz		ext		No	< 2 MHz External ADC required (I/Q output)		0/1 - Scalable (multiple receiver can be connected to the same LO)	Ethernet or USB usually, but other interfaces are available in MLAB modular system	Yes	Yes	Yes
SDR Minor[106]		Pre-built		0.1 – 55 MHz		?		No	122.880 MSps ADC sampling, 48k-960k output samplrate		1/1	LAN 10/100	Yes	Yes	No
SDR-1[107]		Kit and pre-built		530 kHz – 30 MHz		?			up to 192 kHz depending on soundcard		0/1	USB	Yes	No	No
SDRstick UDPSDR-HF2[108]		Pre-built		0.1 – 55 MHz		?			122.88 Msps		0/1	1G Ethernet via BeMicroCV-A9	Yes	Yes	Yes	Altera (as an add-on)
SDRstick UDPSDR-HF1[108]Please Note: A functional receiver requires both the UDPSDR-HF1 and a BeMicro SDK FPGA development board		Pre-built		0.1 – 30 MHz		?		No	80 Msps		0/1	1G Ethernet via BeMicroCV-A9	Yes	Yes	Yes	Altera (as an add-on)
SDR MK1.5 'Andrus'[109]		Pre-built, Open Source Design		5 kHz – 31 MHz (1.7 GHz downconverter opt.)		?		No	64 MSPS		?	USB 2.0, 10/100 Ethernet	Yes	Yes	Yes
SDR-4+[110]		Pre-built		0.85 – 70.5 MHz		?		No	48 kHz (integrated soundcard)		1/1	USB × 2	Yes	Yes	Yes
SDR(X) HF, VHF & UHF[111]		Pre-built		0.1 – 1850 MHz (R820T tuner)		?		No	Optimized for HF amateur bands with 4 user selectable pre-select HF filters		?	USB	Yes	Yes	Yes
SignalShark[112]		Pre-built		8 kHz - 8 GHz	40 MHz	16	N/A	No	?	< 1	?	Gigabit Ethernet	Yes	?	?	?
SoftRock-40[113]		Kit		7.5 MHz		ext		No	48 kHz		0/1	USB	Yes	Yes	Yes
SoftRock Lite II[114]		Kit		1.891 – 1.795 MHz, 3.57 – 3.474 MHz, 7.104 – 7.008 MHz, 10.173 – 10.077 MHz, 14.095 – 13.999 MHz (also purchasable in other tunings)		ext		No	96 kHz		0/1	USB	Yes	Yes	Yes
SoftRock RX Ensemble II LF[115]		Kit or Pre-built		180 kHz – 3.0 MHz		ext		No	External ADC required (I/Q output)		0/1	USB	Yes	Yes	Yes
SoftRock RX Ensemble II HF[116]		Kit or Pre-built		1.8 – 30 MHz		ext		No	External ADC required (I/Q output)		0/1	USB	Yes	Yes	Yes
SoftRock RX Ensemble RXTX[117]		Kit or Pre-built		Choose either 160m, 80m/40m, 40m/30m/20m, 30m/20m/17m, or 15m/12m/10m ("complete [rx/tx] frequency agility within the [chosen] 'superband'")[118]		?		Yes	External ADC required (I/Q output)			USB	Yes	Yes	Yes
Spectre[119]		Pre-built		0.4 – 4 GHz	200 MHz	16		Yes	310 MSPS			USB, Serial, jtag, 10 Gbit/s SFP+ Ethernet	Yes	Yes	Yes
SunSDR2 Pro[120]		Pre-built		10 kHz – 160 MHz	38 – 312 kHz	16	14	Yes	160 MSPS (RX), 640 MSPS (TX)		3/4	10/100 Ethernet, WLAN (embedded)	Yes	Yes	Yes
ThinkRF WSA5000[121]		Pre-built		50 MHz – 8 GHz, 18 GHz or 27 GHz		Up to 100 MHz		No	125 MSPS		?	10/100/1000 Ethernet	Yes	Yes	Yes
UHFSDR[122]		Kit		1.75 – 700 MHz Tx/Rx		ext		Yes	External soundcard required (I/Q input/output)		?	LPT parallel port or USB/W QRP2000/UBW/UBW32	N\A	N\A	N\A
USRP B200[123]		Pre-built		70 MHz – 6 GHz	56 MHz	12	12	Yes	56 Msps			USB 3.0	Yes	Yes	Yes	Xilinx Spartan 6 XC6SLX75
USRP B210[124]		Pre-built		70 MHz – 6 GHz	56 MHz	12	12	Yes	56 Msps			USB 3.0	Yes	Yes	Yes	Xilinx Spartan 6 XC6SLX150
USRP N200[125]		Pre-built		DC – 6 GHz	Up to 25 MHz (40 MHz b/w cards limited by GigE interface) [126]	14	16	Yes	25 Msps for 16-bit samples; 50 Msps for 8-bit samples	0.5 ppm TCXO. 0.01 ppm w/ GPSDO Option		Gigabit Ethernet	Yes	Yes	Yes	Xilinx Spartan 3A-DSP 1800
USRP N210[127]		Pre-built		DC – 6 GHz	Up to 25 MHz (40 MHz b/w cards limited by GigE interface) [126]	14	16	Yes	25 Msps for 16-bit samples; 50 Msps for 8-bit samples	0.5 ppm TCXO. 0.01 ppm w/ GPSDO Option		Gigabit Ethernet	Yes	Yes	Yes	Xilinx Spartan 3A-DSP 3400
USRP X300[128]		Pre-built		DC – 6 GHz	Up to 320 MHz (2x TX/RX at 160 MHz each) [126]	14	16	Yes	200 Msps	2.5 ppm GPSDO Option 20 ppb (GPS unlocked)		Gigabit Ethernet, 10 Gigabit Ethernet, PCIe	Yes	Yes	Yes	Xilinx Kintex-7 XC7K325T
USRP X310[129]		Pre-built		DC – 6 GHz	Up to 320 MHz (2x TX/RX at 160 MHz each) [126]	14	16	Yes	200 Msps	2.5 ppm GPSDO Option 20 ppb (GPS unlocked)		Gigabit Ethernet, 10 Gigabit Ethernet, PCIe	Yes	Yes	Yes	Xilinx Kintex-7 XC7K410T
UmTRX[130]		Pre-built		300 MHz – 3.8 GHz	Up to 28 MHz	12	12	Yes	13 MSPS x2	0.1; 0.01 with GPS lock	?	Gigabit Ethernet	Yes	Yes	?	Spartan 6 LX75
WARPv3[131]		Pre-built		2.4 GHz and 5.8 GHz	40 MHz	12	12	Yes	40 Msps		1/2	Dual Gigabit Ethernet	Yes	Yes	Yes	Xilinx Virtex-6 LX240T
WinRadio WR-G31DCC[132]		Pre-built		9 kHz – 50 MHz		?	N/A	No	100 MSPS		3/3	USB	Yes	No	No
X-RAD[133]		Pre-built		RX: 950–1450 MHz TX: 875–1525 MHz		?		Yes	RX: 1.6 GSPS TX: 3.2 GSPS		?	PCIe	Yes	No	No
Xiegu G90		Pre-built		RX: 0.5 - 30 MHz TX: all amateur bands 1.8 - 30 MHz	48 kHz	24		Yes 20 W	±24k bandwidth spectrum display with waterfall	10	1/1	Embedded system (no computer needed), I/Q output for interfacing with a PC or XDT1 panadapter	Yes	Yes	Yes
XTRX Pro[134]		Pre-built		30 – 3700 MHz	120 MHz	12	12	Yes	120 MSRP SISO, 90 MSRP MIMO	0.1; 0.01 with GPS lock		mini PCIe	Un­known	Yes	Un­known	Xilinx Artix7 50T
Zeus ZS-1[135][136][137]		Pre-built		300 kHz – 30 MHz		?		Yes	10 kHz, 20 kHz, 40 kHz, 100 kHz		1/3	USB 2.0	Yes	No	No
USRP N310[138]		Pre-built		10 MHz – 6 GHz	100 MHz	16	14	Yes	122.88, 125, and 153.6 MS/s	0.1 ppm		SFP+/ Gigabit Ethernet	Yes	Yes	Yes	Xilinx Zynq 7100

See also

• List of communications receivers