List of Starship vehicles
From Wikipedia, the free encyclopedia
Since April 2023, Starship has been launched 7 times, with 4 successes and 3 failures. The vehicle Starship composes when combined with the Super Heavy booster, also named Starship,[1] has been developed with the intention of lowering launch costs using economies of scale.[2] SpaceX aims to achieve this by reusing both rocket stages, increasing payload mass to orbit, increasing launch frequency, creating a mass-manufacturing pipeline and adapting it to a wide range of space missions.[3][4] Starship is the latest project in SpaceX's reusable launch system development program and plan to colonize Mars.
There are currently three planned versions of Starship: Block 1 (also known as Version 1 or V1), Block 2 and Block 3, the proposed variants include a depot, Starship HLS, and Starship Crew. As of September 2024, Block 2 Starships are expected to be compatible with Block 1 and Block 2 boosters.[5] As of November 2024, only Block 1 vehicles have flown.[6] The Starship spacecraft is reusable, and is recovered via large arms on the tower capable of catching the descending vehicle.[7] As of November 2024, 0 vehicles have been refurbished and subsequently flown at least a second time, though the ability to catch a vehicle was proven during Starship's fifth flight test.[8]
Development
Summarize
Perspective
| S/N | Type | Launches | Launch date | Flight No.[a] | Turnaround time | Payload | Launch (pad) |
Landing (location) |
Status |
|---|---|---|---|---|---|---|---|---|---|
| Starhopper | — | 4 | April 3, 2019 | — | — | — | Success (SLS) | Success (SLS) | Repurposed[9][10] |
| April 5, 2019 | — | 2 days | — | Success (SLS) | Success (SLS) | ||||
| July 25, 2019[11] | Hop 1 | 111 days | — | Success (SLS) | Success (SLS) | ||||
| August 27, 2019[12][11] | Hop 2 | 33 days | — | Success (SLS) | Success (SLS) | ||||
| Mk1 | — | 0 | — | — | — | — | — | — | Destroyed |
| Mk2 | — | 0 | — | — | — | — | — | — | Scrapped |
| Mk3/SN1 | Block 0[b] | 0 | — | — | — | — | — | — | Destroyed |
| Mk4 | — | 0 | — | — | — | — | — | — | Scrapped |
| SN3 | Block 0 | 0 | — | — | — | — | — | — | Destroyed |
| SN4 | Block 0 | 0 | — | — | — | — | — | — | Destroyed |
| SN5 | Block 0 | 1 | August 4, 2020[13][14] | Hop 3 | — | — | Success (Pad-A) | Success (SLS) | Scrapped |
| SN6 | Block 0 | 1 | September 3, 2020[15] | Hop 4 | — | — | Success (Pad-A) | Success (SLS) | Scrapped |
| SN8 | Block 0 | 1 | December 9, 2020[16] | High-Altitude flight test 1 | — | — | Success (Pad-A) | Failure (SLS) | Destroyed |
| SN9 | Block 0 | 1 | February 2, 2021[17] | High-Altitude flight test 2 | — | — | Success (Pad-B) | Failure (SLS) | Destroyed |
| SN10 | Block 0 | 1 | March 3, 2021[18][19] | High-Altitude flight test 3 | — | — | Success (Pad-A) | Partial failure (SLS) | Destroyed |
| SN11 | Block 0 | 1 | March 30, 2021[20] | High-Altitude flight test 4 | — | — | Success (Pad-B) | Failure (SLS) | Destroyed |
| SN13 | Block 0 | 0 | — | — | — | — | — | — | Scrapped |
| SN14 | Block 0 | 0 | — | — | — | — | — | — | Scrapped |
| SN15 | Block 0 | 1 | May 5, 2021[21] | High-Altitude flight test 5 | — | — | Success (Pad-A) | Success (SLS) | Scrapped |
| SN16 | Block 0 | 0 | — | — | — | — | — | — | Scrapped |
| SN17 | Block 0 | 0 | — | — | — | — | — | — | Scrapped |
| SN18 | Block 0 | 0 | — | — | — | — | — | — | Scrapped |
| SN19 | Block 0 | 0 | — | — | — | — | — | — | Scrapped |
| SN20/Ship 20 | Block 1 | 0 | — | — | — | — | — | — | Retired |
| Ship 21 | Block 1 | 0 | — | — | — | — | — | — | Scrapped |
| Ship 22 | Block 1 | 0 | — | — | — | — | — | — | Scrapped, converted into test article |
| Ship 23 | Block 1 | 0 | — | — | — | — | — | — | Scrapped |
| Ship 24 | Block 1 | 1 | April 20, 2023 | Starship flight test 1 | — | — | Failure (OLP-A)[c] | Precluded | Destroyed |
| Ship 25 | Block 1 | 1 | November 18, 2023 | Starship flight test 2 | — | — | Failure (OLP-A) | Precluded | Destroyed |
| Ship 26 | Block 1 | 0 | — | — | — | — | — | — | Scrapped |
| Ship 27 | Block 1 | 0 | — | — | — | — | — | — | Scrapped, converted into test article |
| Ship 28 | Block 1 | 1 | March 14, 2024 | Starship flight test 3 | — | — | Success (OLP-A) | Failure (ocean) | Destroyed |
| Ship 29 | Block 1 | 1 | June 6, 2024 | Starship flight test 4 | — | — | Success (OLP-A) | Controlled (ocean) | Expended |
| Ship 30 | Block 1 | 1 | October 13, 2024 | Starship flight test 5 | — | — | Success (OLP-A) | Controlled (ocean) | Expended |
| Ship 31 | Block 1 | 1 | November 19, 2024 | Starship flight test 6 | — | Stuffed banana[22] | Success (OLP-A) | Controlled (ocean) | Expended |
| Ship 32 | Block 1 | 0 | — | — | — | — | — | — | Retired |
| Ship 33 | Block 1 | 0 | — | — | — | — | — | — | Scrapped |
| Ship 34 | Block 1 | 0 | — | — | — | — | — | — | Scrapped |
| Ship 35 | Block 1 | 0 | — | — | — | — | — | — | Scrapped |
| Ship 36 | Block 1 | 0 | — | — | — | — | — | — | Scrapped |
| Ship 37 | Block 1 | 0 | — | — | — | — | — | — | Scrapped |
| Ship 38 | Block 1 | 0 | — | — | — | — | — | — | Scrapped |
| Ship 33 | Block 2 | 1 | January 16, 2025 | Starship flight test 7 | — | 10 Starlink simulators | Failure (OLP-A) | Precluded | Destroyed |
| Ship 34 | Block 2 | 0 | — | — | — | — | — | — | Operational (awaiting engine installation) |
| Ship 35 | Block 2 | 0 | — | — | — | — | — | — | Under construction |
| Ship 36 | Block 2 | 0 | — | — | — | — | — | — | Under construction |
| Ship 37 | Block 2 | 0 | — | — | — | — | — | — | Under construction |
| Ship 38 | Block 2 | 0 | — | — | — | — | — | — | Under construction |
Starhopper
Starhopper in March 2019
Starhopper configuration as flown in August 2019
Construction on the initial steel test article—Starship Hopper,[23] Hopper, Hoppy, or Starhopper[24]—began at Boca Chica in 2018. Starhopper had a single engine and was test flown to develop landing and low-altitude/low-velocity control algorithms.
Starhopper used liquid oxygen (LOX) and liquid methane fuel. After it completed its testing campaign Starhopper was repurposed as a water tank, weather station and equipment mount for cameras, lights, loudspeakers and a radar system.[25]
Testing
It passed tanking tests, wet dress rehearsals, and pre-burner tests.[26] A storm blew over and damaged Starhopper's nose cone. SpaceX continued testing without one.[27]
It then passed a static fire test,[28] and in a tethered test reached 1 meter altitude.[29][30][27] On July 25, 2019, a Starhopper test flight reached about 20 m (66 ft) altitude,[31] followed by an August 27 test that rose to 150 m (490 ft)[32] and landed about 100 m (330 ft) from the launchpad, the Raptor's first use in flight.
On September 3, 2024, Starhopper was moved to a parking lot nearby the launch site.[33]
Mark series (Mk1–Mk4)
SpaceX began building the high-altitude prototype, Mk1 in Texas and Mk2 in Florida, using competing teams that shared progress, insights, and build techniques.[34][29] The vehicle featured three Raptor methalox engines and were meant to reach an altitude 5 km (3.1 mi).[35][36]
Mk1 was 9 m (30 ft) in diameter and about 50 m (160 ft) tall,[37] with an empty mass of 200 t (440,000 lb). It was intended for testing flight and reentry profiles, in pursuit of a suborbital flight. When announced, it had three sea-level Raptor engines, two fins each at the front and back, and a nose cone containing cold-gas reaction control thrusters, with all but the aft fins being removed afterwards.[38][39][37]
On November 20, 2019, Mk1 blew apart during a pressure test.[40][41]
SpaceX began Mk2 in Florida, sharing progress, insights, and build techniques with the Mk1 team in Texas.[34][29] It was never completed.[42]
The Mk3 prototype began construction in late 2019.[37] In December 2019, Musk redesignated Mk3 as Starship SN1, and predicted that minor design improvements would continue through SN20.[43] SpaceX began stacking SN1 in February 2020 after successful pressurization tests on propellant tank prototypes. SN1 was destroyed during a cryogenic pressurization test on February 28, 2020, due to a design flaw in the lower tank thrust structure.[44][45]
Mk4 began construction in Florida in October 2019,[46] but was scrapped after a few weeks.
Hops (SN3–SN6)
SN3 and SN4
SN3 was destroyed during testing on April 3, 2020[47][48] due to a failure in the testing configuration.[47]
.jpg)
SN4 passed cryogenic pressure testing on April 26[49] and two static fires on May 5 and May 7: one tested the main tanks, while the other tested the fuel header tank.[50] After uninstalling the engine, a new cryogenic pressure test was conducted on May 19. A leak in the methane fuel piping ignited, causing significant damage to the rocket's base, destroying the control wiring.[51] SN4 was destroyed on May 29, due to a failure with the Ground Support Equipment's quick-disconnect function.[52]
SN5 and SN6
After a static fire test on July 30,[53] SN5 completed a 150-meter flight (August 4) with engine SN27.[14][54] SN5 was scrapped in February 2021.[55]
SN6 completed a static fire on August 24, and a 150-meter hop test flight with engine SN29 on September 3. In January 2021, SN6 was scrapped.[56]
High-altitude test flights (SN8–S23)
.jpg)
.jpg)
SN8 and SN9
SN8 was planned to be built out of 304L stainless steel,[57] although some parts may have used 301L steel.[58] In late October and November, SN8 underwent four static fires. During the third test, on November 12, 2020, debris from the pad caused the vehicle to lose pneumatics.[59] Launch took place on December 9. Launch, ascent, reorientation, and controlled descent were successful, but low pressure in the methane header tank[60] kept the engines from producing enough thrust for the landing burn, destroying SN8 on impact.[61]
On December 11, 2020, the stand beneath SN9 failed, causing the vehicle to tip and contact the walls inside the High Bay.[62] SN9 then required a replacement forward flap.[63] SN9 conducted 6 static fires in January 2021,[64] including three static fires in one day.[65] After these tests, two engines had to be replaced.[66] After struggling to gain U.S. Federal Aviation Administration (FAA) permission,[67] SN9 conducted a 10 km (6.2 mi) flight test on February 2. Ascent, engine cutoffs, reorientation and controlled descent were stable, but one engine's oxygen pre-burner failed, sending SN9 crashing into the landing pad.[68] The landing pad was then reinforced with an additional layer of concrete.[69] After the SN9 failure, all three engines were used to perform the belly flop landing sequence. This offered a failsafe should one fail to ignite.[70][71]
SN10–SN14
SN10 underwent a cryogenic proof test on February 8, 2021, followed by a static fire on February 23.[72] After an engine swap, another static fire was conducted on February 25.[73]
Two launch attempts were conducted on March 3. The first attempt was automatically aborted after one engine produced too much thrust while throttling up. After a 3-hour delay to increase the tolerance,[74] the second attempt launched and landed successfully. The test ended with a hard landing-at 10 m/s – most likely due to partial helium ingestion from the fuel header tank. Three landing legs were not locked in place, producing a slight lean after landing. Although the vehicle initially remained intact, the impact crushed the legs and part of the leg skirt. Eight minutes later the prototype exploded.[75][76]
SN11 accomplished a cryogenic proof test on March 12 that included a test of the Reaction control system (RCS),[77][78] followed by a static fire test on March 15, 2021. Immediately after ignition, the test was aborted.[79] Another static fire attempt[80] led to reports that one of the three engines had been removed for repairs.[81] A replacement engine was installed[82] and a third static fire was attempted on March 26.[83] A 10 km flight test was conducted in heavy fog on March 30. The test included engine cutoffs, flip maneuver, flap control and descent, along with a visible fire on engine 2[84] during the ascent. Just after the defective engine was re-ignited for the landing burn, SN11 lost telemetry at T+ 5:49 and disintegrated.[85]
SN12 through SN14 never launched.[86]
SN15–SN19
SN15 introduced improved avionics software, an updated aft skirt propellant architecture, and a new Raptor design and configuration.[87][88] A Starlink antenna on the side of the vehicle was another new feature.[89] SN15 underwent an ambient temperature pressure test on April 9, 2021,[90] followed by a cryogenic proof test on April 12, and a header tank cryogenic proof test on April 13.[91][92] A static fire was conducted on April 26,[93][94] and a header tank static fire on April 27 followed.[95] A 10 km (33,000 ft) high-altitude flight test was conducted in overcast weather on May 5, achieving a soft touchdown. A small fire near the base started shortly after landing, though this was extinguished.[96] After its engines were removed, it was moved to the Rocket Garden on May 31, 2021.[97] On July 26, 2023, SN15 was scrapped.[98]
SN16 was scrapped, while SN17, SN18, and SN19 were never completed.
SN20/Ship 20–Ship 23
SN20 was the first vehicle with a complete thermal protection system (TPS). SN20 rolled out to the launch mount on August 5, 2021, and was stacked onto Booster 4 for a fit test.[99][100][101] U.S. Federal Communications Commission (FCC) filings in May 2021 by SpaceX stated that the orbital flight would launch from Boca Chica, Texas. After separation, Starship would enter orbit and around 90 minutes later attempt a soft ocean landing around 100 km off the coast of Kauai, Hawaii.[102] However, S20 was retired in March 2022. As of April 2024, SN20 (Ship 20) remains in the Rocket Garden.
Ship 21 was scrapped before being completed.[103]
Ship 22 moved to the Rocket Garden in late February 2022. It was later scrapped, in favor of using S24 for integrated flight test 1 (IFT-1).[103] Its nosecone was converted into a HLS interior mockup. 3d Artist TheSpaceEngineer has claimed that this mockup features two decks, the first containing the life support systems (ECLSS), and the second serving as habitation for the crew.[104]
Ship 23 was scrapped and partially recycled in Ship 24.[105]
Block 1 launches (S24–S38)
Ship 24 and Ship 25
Ship 24 was first spotted in November 2021, and conducted cryogenic proof tests on June 2, 2022, June 6, and June 7.[106][107] On June 9, Ship 24 was rolled back to the production site for engine installation,[108] and was rolled to Suborbital Pad B on July 5.[109][110] Ship 24 conducted a series of spin prime tests in mid-late July.[111][112][113][114] It completed a two engine static fire test on August 9,[115] followed by an additional spin prime test on August 25.[116] On September 8, 2022, Ship 24 underwent a six engine static fire test.[117] The ship was subsequently stacked on top of Booster 7 in mid-October, followed by two destacks in October and early November.[118][119][120] On December 15, Ship 24 conducted a single engine static test fire.[121][122] In January 2023, Booster 7 and Ship 24 conducted a Wet Dress Rehearsal.[123] On April 20, 2023, Ship 24 was destroyed in flight along with Booster 7 after spinning out of control.[124][125]
Ship 25 was a Starship prototype similar to Ship 24, equipped with a heat shield and a payload bay, though this was permanently welded shut.[126] It was used to test the cryogenic test stand at Massey's test site.[126] During the third week of May 2023, Ship 25 was moved to the launch site and lifted onto suborbital pad B for engine testing.[126] On June 21, 2023, Ship 25 performed a successful spin prime test,[126] On June 26, 2023, Ship 25 underwent its first static fire test, igniting all six engines.[126] On August 5, 2023, it was moved to the Rocket Garden for final TPS work.[126] It was lifted onto B9 for the first time on September 5, and was destacked several times throughout the rest of the month and mid October.[126] On October 22, B9 underwent two partial cryogenic tests, while S25 was not tested,[126] followed by a full wet dress rehearsal (WDR) two days later.[126] On November 18, 2023, Ship 25 was launched atop Booster 9 on the second Integrated Flight Test, with Ship 25 successfully separating from Booster 9.[126] Near the end of its burn, a LOX dump started a fire in the engine bay, causing an explosion.[126] The autonomous flight termination system activated, destroying the vehicle.[126]
Ship 26 and 27
Ship 26 was an expendable Starship prototype, lacking heat shield tiles and flaps. Ship 26 also lacked a payload bay door. On September 9, 2023, S26 was moved to Suborbital Pad B for static fire testing.[127] S26 then underwent a cryogenic test on October 9, 2023, followed by a preburner test with a single engine nine days later,[128] and a single engine static fire test on October 20, 2023, simulating a deorbit burn. On December 16, 2023, SpaceX crews began welding large steel pieces onto S26's payload bay, although it is unclear what was the reason behind this reinforcement.[129] Additional supports were added on December 20, 2023.[130] S26 was rolled to the Massey's site on May 8 for static fire stand testing.[131][132] S26 conducted a cryogenic test on May 24,[133] followed by a six engine static fire on June 3.[134] S26's engines were removed on August 14.[135] It was moved into the High Bay on November 20,[136] where it was scrapped.[137]
Like S26, S27 was an expendable prototype, lacking heat shield tiles. It was the first Ship to have a reinforced payload dispenser. Ship 27 was scrapped on July 20, 2023, after the common dome failed.[138] S27's aft section was then converted into a test article, presumably to test the engine shielding design present on S25.[139] On September 27, 2023, S27 was rolled to the Massey's test site.[139]
Ships 28–32
Ship 28, along with subsequent Block 1 models, features heat shield tiles as well as reinforced Starlink satellite dispensers.[140] In July 2023, S28 underwent cryogenic testing, before receiving engines on August 18.[141] On December 14, S28 was moved to the launch site and lifted onto Suborbital Pad B,[142] where it completed a spin prime test on December 16,[141] followed by a six engine static fire test on December 20,[141] and a deorbit burn test on December 29.[142] S28 was moved to the Orbital Launch Site for IFT-3 on February 10,[141] and was stacked onto the B10 rocket.[141] The combined vehicle conducted two aborted wet dress rehearsal attempts on February 14 and February 16.[141][143] It was returned to Suborbital Pad B on February 19,[141] where underwent a spin prime test on February 26,[141] On March 3, 2024, B10 and S28 completed a wet dress rehearsal,[141] followed by a final destack on March 5 for FTS installation.[141] The FTS was armed on March 8, 2024,[141] followed by S28 being restacked on March 10, 2024.[141] S28 flew with B10 on March 14, and reached orbit. It conducted tests of the Payload Dispenser and fuel transfer system, before being destroyed during reentry.[144]
On September 22, 2023, S29 was moved to Massey's for cryogenic testing, where it was cryogenically tested on September 26,.[145] On November 21, 2023, S29 was moved into the High Bay,[145] and on February 29, S29 was moved to the launch site,[145] where it underwent a cryogenic test on March 7,[146] followed by a spin prime test on March 11.[147] On March 12, 2024, S29 was briefly removed from the launch site to prevent damage from IFT-3, before returning ahead of two static fire tests on March 25 and March 27.[148][145] On May 15, S29 was lifted onto B11, with the combined vehicle completing a partial cryogenic test on May 16,[149] and a full wet dress rehearsal on May 20.[150] A second wet dress rehearsal was conducted on May 28.[151] On May 29, S29 was destacked for final tile work and Flight Termination System (FTS) Installation,[145] with FTS installation occurring on May 30.[145] S29 was stacked onto B11 for the final time on June 5.[145] On June 6, S29 was launched with B11 on IFT-4, with S29 completing a full ascent burn with no engine failures.[152] It retained attitude control into reentry, despite the near-complete loss of a forward flap,[152] and achieved a successful landing burn.[152]
S30 was moved to Massey's test site for cryogenic testing on December 30, 2023.[153] On January 3, 2024, S30 underwent its first cryogenic test.[153] On May 1, it was rolled to the Suborbital Launch Site,[154] where it was lifted onto Suborbital Pad B for static fire testing.[155] It conducted a cryogenic test on May 7,[156] followed by an aborted static fire test,[157] and a 6 engine static fire test on May 8. On June 11, SpaceX began removing and replacing S30s thermal protection system, adding a backup ablative layer.[153] S30 was rolled to Massey's on July 20,[153] ahead of a 6 engine static fire on July 26,[158] and rolled back to the production site on July 27.[153] One of S30's Raptor Vacuum engines was replaced on August 3,[153] and it was rolled back to Massey's on August 6,[153] where it conducted a spin prime test on August 7.[159] SpaceX claimed that Booster 12 (B12) and S30 were ready to fly on August 8.[159] S30 was then rolled back to the production site.[153] On September 21, S30 was lifted onto B12.[160] A partial wet dress rehearsal was conducted on September 23.[161] followed by a second partial wet dress rehearsal on October 7,[162] followed by S30 being destacked for FTS installation.[163] FTS was installed on both vehicles on October 9,[164] and S30 was stacked onto B12 for Flight 5 on October 11.[153] On October 13, S30 launched on B12, and reached the desired trajectory after a nominal ascent burn with no engine failures. Like S29, S30 retained attitude control through reentry, and successfully reignited its engines for a splashdown in the Indian Ocean.[165] As of October 13, 2024, S30 is the largest artificial object to reenter Earth's atmosphere.[166]
On December 14, 2023, S31 was moved to the Rocket Garden,[167] before being moved back into the High Bay on January 4.[168] It was rolled to Massey's test site for cryogenic testing on May 11,[169] with the first test ending prematurely due to an electrical anomaly.[170] After being repaired, it returned to Massey's,[171] where it was cryogenically tested on July 2 and July 3.[172] On July 5, S31 was moved to Mega Bay 2 for engine installation.[173] The process of replacing S31's thermal protection system began in early August.[174] On September 6, S31 was rolled to Massey's for static fire testing.[175] It attempted to static fire on September 8, with the test being aborted due to the weather.[176] S31 conducted a static fire on September 18,[141] and it was rolled back to the production site on September 20.[177] S31 was moved to the launch site for IFT-6 on November 11,[178] where its Flight Termination System was installed on November 12.[179] It was stacked onto Booster 13 (B13) on November 14,[180] with the combined vehicle conducted a partial wet dress rehearsal on November 17.[181] On November 19, S31 launched on B13, and reached the desired trajectory.[22] After conducting a relight of a raptor engine, S31 reenetered the atmosphere, and successfully completed the landing burn for a splashdown in the Indian Ocean.[22] Several components of S31, including multiple tiles and COPVs, were recovered for analysis in Australia.[182][183]
On November 24, Elon Musk implied that S32 would be the last Block 1 starship.[184] On January 10, 2024, S32 was moved to the Rocket Garden.[153] SpaceX confirmed that Flight 7 and subsequent launches would use Block 2 vehicles.[185]
Ships 33–38
In late November, 2023, the original S33's components were scrapped,[186] alongside the components of the original S34 through S38.[103]
Block 2 launches (Ships 33 and subsequent)
Block 2 ships will feature a new forward flap design, increased propellant capacity, and an increase in thrust.[187] Additionally, the leeward side of the vehicle has some external stringers.[188] These vehicles will be a total of 1.8 m (5 ft 11 in) meters taller than the previous Block 1 ships.[187]
On July 24, 2024, S33's nosecone and payload bay were rolled into Mega Bay 2.[189] Stacking of the vehicle was completed on August 23.[190] On October 26, S33 rolled to the Massey's test site,[191] where it conducted a series of cryogenic tests.[192] After engine installation, it returned to Massey's on December 11.[193] It conducted a spin prime on December 12[193] with an aborted static fire on December 14,[194] and a static fire on December 15.[195] This was followed by a single engine static fire,[196] and a return to Mega Bay 2 for final pre-flight modifications.[197] Payload integration occurred on January 7.[198]Ship 33 rolled to the launch site for launch on January 9,[199] where it was stacked onto Booster 14 (B14),[200] surpassing Starship Block 1 as the tallest rocket ever assembled.[201] The combined vehicle conducted a Wet Dress Rehearshal on January 10,[202] before being destacked on the 11th.[203] It was restacked for launch the next day.[204] On January 16, Ship 33 launched atop Booster 14, but was destroyed during the ascent burn.[205]
On September 19, 2024, S34's nosecone was rolled into the High bay ahead of integration with the payload bay.[206] The combined assembly was then rolled into the Starfactory,[207] and from there into Mega Bay 2.[208] On January 15, 2025, S34 rolled to Massey's for cryogenic testing.[209] It completed its first test on January 17,[210] followed by a second cryo test.[211] It then returned to Mega Bay 2 for engine and aft flap installation.[212]
S35's payload bay was rolled into the High Bay ahead of stacking with its nosecone.[213] This assembly was then rolled into Mega Bay 2.[214]
Test articles
Summarize
Perspective
Starship-based test articles
| S/N | Tests | Decommission Date | Status |
|---|---|---|---|
| LOX HT | 2 | January 25, 2020[215] | Destroyed |
| SN2 | 1 | March 2020[216] | Retired |
| SN7 | 2 | June 23, 2020[217] | Destroyed |
| SN7.1 | 2 | September 22, 2020[218] | Destroyed |
| SN7.2 | 2 | May 22, 2021 | Retired |
| S24.1 | 3 | 2023 | Scrapped |
| S26.1 | 3 | September 2023 | Destroyed |
| S24.2 | 2 | 2024 | Scrapped |
| TT16 | 2 | October 2024 | Retired |
Liquid Oxygen Header Test Tank (LOX HTT) was based on the LOX Header tank, as well as surrounding parts of the nosecone. On January 24, 2020, the tank underwent a pressurization test which lasted several hours.[219] The following day it was tested to destruction.[215]
SN2 was a test tank used to test welding quality and thrust puck design. The thrust puck is found on the bottom of the vehicle where in later Starship tests up to three sea-level Raptor engines would be mounted. SN2 passed a pressure test on March 8, 2020.[45][44]
SN7 was a pathfinder test article for the switch to type 304L stainless steel.[57] A cryogenic proof test was performed on June 15, 2020, achieving a pressure of 7.6 bar (110 psi) before a leak occurred. During a pressurize to failure test on June 23, 2020, the tank burst at an unknown pressure.[220][217]
SN7.1 was the second 304L test tank, with the goal of reaching a higher failure pressure.[57] The tank was repeatedly tested in September, and tested to destruction on September 23.[221] The bulkhead came apart at a pressure of 8 bar (115 psi) in ullage and 9 bar (130 psi) at base.[222][218]
SN7.2 was created to test thinner walls, and therefore, lower mass. It is believed to be constructed from 3 mm steel sheets rather than the 4 mm thickness of its predecessors.[223] On January 26, 2021, SN7.2 passed a cryogenic proof test. On February 4, during a pressurize to failure test, the tank developed a leak.[224][71] On March 15, SN7.2 was retired.[225][226]
S24.1 was a test article design to test the redesigned aft section present on Block 1 ships after S24. It conducted a single test on the can-crusher on October 7, 2022. After this test failed, it received modifications before completing two tests on December 5 and December 6.[227]
S26.1 was a test tank designed to test the aft section of Block 1 ships after S24.1's failure. It conducted two tests on the can-crusher, before being moved off in July 2023.[228] On September 21, 2023, it was tested to destruction.[229]
S24.2 was a test article designed to test the payload bay of Starlink dispenser vehicles.[230] On September 28, 2023, it was moved to the Massey's test site. It performed two tests before subsequently being scrapped.
TT16 is a test tank designed for testing the Block 2 ship aft section,[231][232] consisting of an aft section and a small common dome section. Its official designation is not yet known.[188] On July 18, it was rolled to the Massey's test site for structural testing.[231] It conducted two cryogenic tests on July 25,[233] followed by another test on September 6, 2024.[234] It was returned to the production site in early October for scrapping.[235]
General test articles
Test Tank 1 (TT1) was a subscale test tank consisting of two forward bulkheads connected by a small barrel section. TT1 was used to test new materials and construction methods. On January 10, 2020, TT1 was tested to failure as part of an ambient temperature test, reaching a pressure of 7.1 bar (103 psi).[236][238]
Test Tank 2 (TT2) was another subscale test tank similar to TT1. On January 27, 2020, TT2 underwent an ambient temperature pressure test where it reached a pressure of 7.5 bar (109 psi) before a leak occurred.[239] Two days later, it underwent a cryogenic proof test to destruction, bursting at 8.5 bar (123 psi).[240][237][241]
GSE 4.1 was first spotted in August 2021 and was the first ground support equipment (GSE) test tank built, made from parts of GSE 4.[227] It underwent a cryogenic proof test in August 2021 before it was rolled to the Sanchez site.[242] It was rolled back to the launch site in November 2021, where it underwent an apparent cryogenic proof test to failure on January 18, 2022, where it burst at an unknown pressure.[243]
EDOME was a test tank created to test flatter domes, possibly used on future Starship prototypes. It was moved to the launch site in July 2022, and then back to the production site the next month, after undergoing no tests.[244] It was later moved from the production site to the Massey's test site in late September 2022, where it was damaged during a cryogenic pressure test to failure.[244] After repairs, it was tested to destruction in late October 2022.[244]
EDOME 2 was a test tank which is likely designed to continue testing a flatter dome design. As of October 4, 2023, its official designation is unknown. It was tested once, before being scrapped for unknown reasons.[245]
See also
- List of Falcon 9 first-stage boosters
- Starship HLS, lunar variant of the Starship spacecraft
- SpaceX Starbase, launch site of Super Heavy
- Starlink, large satellite constellation by SpaceX
- List of Super Heavy boosters
References
Wikiwand in your browser!
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.
