List of 3D printed weapons and parts

The table below lists noteworthy 3D printed weapons (mainly 3D printed firearms) and parts.

List of weapons and parts

Key/Legend

  Plastic -Weapon/Part used plastic 3D-printer

  Metal -Weapon/Part used metal 3D-printer

  Both -Weapon/Part uses both metal and plastic 3D-printers

Entire firearms

Name	Date made public	Type	Mechanism	Process	Designer	Other required parts	Caliber
Monolith Arms P-12[1][2][3]	2005	Hybrid firearm:shotgun	Pump action	Unreleased	Empty Shell llc	Empty Shell LLC components	12-gauge
	Never publicly released Horizontal 20 round detachable magazine
Liberator .380[4][5]	2013-052013, May[4][6][7]	Primarily printed firearm: Pistol	Single shot	FDM[8]	Defense Distributed[9]	Roofing nail	.380 ACP
	A single shot .380 ACP pistol.[4][6][7] Fully 3D printed including springs, requiring only a roofing nail Notable as the first publicly released printed firearm design
Grizzly,[5][10] Grizzly 2.0,[11] G22 v3[12]	2013-082013, August (original), G22 v3 (latest)[10][12]	Hybrid firearm: Rifle	Single-shot	FDM w/ ABS	"Matthew" (pseudonym)[10][11][12]	.22 caliber barrel liner Metal rods Metric fasteners Springs Screws	.22 LR
Reprringer[5][13][14][15]	2013-092013, September[13]	Primarily printed firearm: Pepper-box revolver[5][13]		FDM	Hexen[13][14]		.22 Short/.22 LR
	It can hold 5 .22 caliber cartridges.[13][14] Unlike the many early 3D-printed firearm designs, which were overbuilt in order to withstand the pressures and strain on the material from modern gunpowder cartridges, the Reprringer is small and only slightly larger than an equivalent gun made from steel.[13]
Solid Concepts 1911 DMLS[16]	2013-112013, November[16]	Weapon: Browning 1911 handgun[5][16]	Semi-automatic, Short-recoil	DMLS[16]	Solid Concepts[5][16]	Springs	.45 ACP
	The gun is made up of 34 3D-printed components.[17] Notable as the first fully metal 3D-printed firearm.
Zig Zag revolver[5][18]	2014-052014, May[18]	Primarily printed firearm: Revolver[5]		FDM[5]	Yoshitomo Imura[18]		.38 Caliber
	Named after the German Mauser Zig-Zag revolver. Holds six cartridges and can fire .38 caliber bullets.[15]
Imura Revolver[19][20][21]	2014-092014, September[20]	Primarily printed firearm: Revolver[19][20]		FDM	FOSSCAD members: WarFairy, Frostbyte and others[21]	.22 caliber barrel liner	.38 Caliber
	A double-action revolver[21] that holds six cartridges.[22] While primarily made of plastic, it includes a steel barrel liner and chamber sleeves[21] to increase tensile strength.[23][better source needed]
Reason[24]	2013-112014, October	Weapon: M1911 pistol	Semi-autonatic Recoil operation	DMLS[25]	Solid Concepts[26]		10mm Auto
	Created roughly after a year the first known metal 3D printed gun was produced.[24] Has the word "Reason" etched on it, along with an excerpt from the Declaration of Independence on the barrel.[25]
XPR-1[27]	2015-102015, October	Weapon: Plasma Armature Railgun		FDM	David Wirth[28]
	First 3D printed railgun structure. Closed source - designs and code released to research institutions only. Employed a mixture of traditional and additive manufacturing. Rails were traditionally machined, as well as the fasteners and electronics.
PG22[29]	2017-022017, February	Primarily printed firearm:pistol	Single-shot	FDM w/ PLA	Pilotgeek	Steek barrel liner, breechblock, firing pin, and spring	.22 LR
	Uses a plastic frame, slide, and fire control components with a steel barrel liner, breechblock, firing pin, and spring. First in line of "PG22" single shot pistols and revolvers. Individually designed, rather than built off of open-source plans.
EMG-01A[30]	2018-072018, July	Weapon: Coilgun		FDM	Arcflash Labs
	First commercial handheld coilgun.[31]
FGC-9 / FGC-9 MkII	2020, March 27 (MKI); 2021, April 16, (MKII)	Hybrid Firearm: pistol	Semi-automatic simple blowback	FDM	JStark1809 (DetDisp)	Steel round stock, springs, AR-15 fire control group springs, fasteners, stainless steel tubing	9×19mm Parabellum
	Based on Shuty AP-9. No parts kit required: barrel can be rifled via Electrochemical machining (ECM). Version two, labeled MKII, features an updated design with an H&K MP5 style charging handle. The MKII was released to work with a string of smaller releases, including an improved barrel making process and V2 Menendez Mag. Includes the "ButWhatAboutAmmo" tutorial for fabricating ammunition.
Thump 'n Grind[32]	2021, July	Signaling device: Launcher		FDM	AWCY?	Steel rods, tubing, AR-15 FCG, fasteners	37mm ammunition
The Harlot[33]	2022, February	Primarily printed firearm: Pistol	Single-shot	FDM	BAD-CAD / Black Lotus Coalition	.22 caliber barrel liner, spring, and fasterners	.22 LR
	A mostly printed .22 LR pistol. Uses a DIY metal barrel, firing pin, and spring. Simple and extremely cheap, designed to cost $5-$8. Commonly created to be sold at gun buybacks for profit.[34] A large number of remixes and variants of this design have been created.
The Urutau[35]	2024,July 20	Hybrid Firearm: Bullpup Short-Barreled Rifle or Standard Rifle	Semi-Automatic Straight-Blowback	FDM	Joseph The Parrot, A.K.A. Zé Carioca	Steel Bar/Round Stock, Hydraulic Tubing, Springs, Screws, Pins, Spacers	9x19mm
	Based on the FGC-9 and Partisan 9 Parts kits are commercially available to Americans but not required for anyone Barrel is manufacturable with Electrochemical Machining (ECM) Documentation includes a guide for avoiding detection by law enforcement Files include "The New Second Amendment", a nine-page manifesto encouraging Urutau builders "to permanently undermine global firearm prohibition"

Receivers & frames

Receiver and frame are the parts that are legally considered a firearm and must be registered.

Name	Date made public	Type	Process	Designer	Caliber
AR Lower V5[36]	2013-032013, March[36]	Receiver: AR-15 rifle lower receiver[36]	FDM[37]	Defense Distributed[36]	.223 Rem/ 5.56x45
	The receiver was able to handle enough stress to fire more than 600 rounds.[36]
Charon[38][39][40]	2013-05May 2013[38]	Receiver: AR-15 rifle lower receiver[38][39][40]	FDM[41]	WarFairy[39][40]	.223 Rem/ 5.56x45
	Charon V3 weighs 0.2 pounds and showed no signs of strain after 96 rounds of 5.56 AR-15 ammo were fired.[41]
WarFairy P-15[38]	2013-052013, May[38]	Receiver: AR-15 rifle lower receiver[36]	FDM[41]	WarFairy[39][40]	.223 Rem/ 5.56x45
Hanuman AR-15 Bullpup[42][43]	2014-052014, May[42][43]	Receiver: AR-15 rifle bullpup lower receiver[42][43]	FDM w/ ABS	WarFairy[42][43]	.223 Rem/ 5.56x45
	According to the creators, "It requires a bufferless upper to function, such as the ARAK-21 or Rock River Arms PDS Carbine, or a regular upper with a CMMG Style .22 LR Conversion installed."[42]
Ruger Charger[44][45][46]	2014-072014, July[45]	Receiver: Ruger 10/22 semi-automatic pistol[45]	FDM[47]	"Buck-o-Fama" (pseudonym)[45]	.22 Long Rifle
	A pistol version of the popular Ruger 10/22 rifle.[44][45]
CM901[48]	2015-032015, March	Receiver: AR-10 Receiver	FDM	Printed Firearm[49]	7.62×51mm
	Based on Colt CM901.
Lopoint / Bigpoint[50]	2019, November (v1); 2020, November (,40/.45); 2021, May (v2)	Frame: Hi-Point pistol frame	FDM	CTRLPew / Atmac / freeman1337	9×19mm Parabellum, .380 ACP, .40 S&W, .45 ACP
	Compatible with Hi-Point C9, CF380, JCP, and JHP parts. Extremely cheap due to the high availability of the required parts kits.
Scz0rpion[51]	2020, October	Receiver: CZ Scorpion Evo 3 receiver	FDM	Are We Cool Yet?	9×19mm Parabellum
	First 3D printed frame to be successfully tested with 1000+ rounds full auto in one sitting without failure.[52][53]
3011 / 3011DS[54]	2021, November; 2023, January (DS)	Receiver: 1911 based PDW	FDM	Deterrence Dispensed	.45 ACP, 9×19mm Parabellum, .22 TCM
	Utilizes a 1911 slide for the upper, and an AR-15 fire control group. An updated version, called the 3011DS, allows the use of double-stack higher capacity Remington and RIA magazines.
3DPD10[55]	2023, April	Frame: Pistol frame	FDM	Avidity Arms	9×19mm Parabellum
	A 3D-printable frame for the Avidity Arms PD10. This design is notable as the first firearm released by commercial company designed to be 3D printed.[56]

Firearms parts and accessories

Name	Date made public	Type	Process	Designer	Caliber
The Cuomo Mag[57]	2013-01January 2013[58]	Magazine: AR-15 rifle STANAG magazine[57]	FDM[59]	Defense Distributed[58]	.223 Rem/ 5.56x45
	The magazine holds 30 rounds.[58][60][61] The initial prototype was created using an Objet Connex26 using VeroClear printing material (a transparent material) in order to show the magazine's round count and feeding action.[62] It was able to handle enough stress to fire 342 rounds and can fire 227+ rounds in quick succession.[61]
Feinstein AK Mag[57][63][64]	2013-03March 2013[57][63]	Magazine: AK-47 rifle magazine	FDM[65]	Defense Distributed[57][63]	7.62×39mm
	A 30-round AK-47 magazine.[57]
Red Rocket shotgun slug	2013-05May 2013	Ammunition: 12 gauge shotgun slug[citation needed]	FDM w/ ABS+[66]	Jeef Hesszel[67]	12-gauge
	During testing, the bullet penetrated a 2×12 piece of pine wood, creating a hole in a wire reel.[66]
3DX[68][69] muzzle brake	2013-07July 2013[68]	Muzzle device: AR-15 rifle muzzle brake[68]	DMLS w/ Inconel[68]	Sintercore[68]	.223 Rem/ 5.56x45
	Designed to tame the recoil and muzzle rise of an AR-15 semi automatic rifle chambered in 5.56×45mm NATO (.223).[68] It fired 7900 rounds during testing on semi-auto.[69] During a test on full auto, 10 magazines of 62 grain green tip 5.56 rounds were fired without any issues.[69] US Special Operation Command's (USSOCOM) Science and Technology Directorate invited Neal (the owner of Sintercore) to demonstrate the 3DX muzzle brake for possible use by its elite troops. They tested it on August 5, 2014.[69]
5.56×45mm/.223 rifle suppressors: 556-45 Samson (Samson suppressor replica) 556-SBR 556-45 Suppressor[70]	2013-11November 2013[71]	Muzzle device: Titanium rifle suppressor[70]	SLM w/ Titanium[72]	Oceania Defence Ltd.[72][71][73] and Rapid Advanced Manufacturing[74]	.223 Rem/ 5.56x45
	An additively manufactured titanium weapon suppressor. It is 50% lighter than some conventional steel suppressors.[72] Oceania Defense has made three variations of the 5.56mm/.223 suppressor so far: the 556-45 Samson (an AR-15 suppressor designed to operate on semi auto Short-barreled rifle to 12.5" barrels), 556-SBR (designed for hard use on 10.5" barrel for AR-15 firearms in 5.56mm/.223 ammunition) and 556-45 Suppressor (direct thread on suppressor which overlaps the barrel designed to reduce a baffle strike)[70]
7.62×51mm/.308 rifle suppressors: 300 BLK Long 762-AR10 762-G3[75]	2013-11November 2013[71]	Muzzle device: Titanium rifle suppressor[75]	SLM w/ Titanium[72]	Oceania Defence Ltd.[72][71][73] and Rapid Advanced Manufacturing[74]	7.62x39mm
	An additively manufactured titanium weapon suppressor. 50% lighter than some conventional steel suppressors.[72] Oceania Defence made 3 variations of the 7.62mm rifle suppressor. the 300 BLK Long (designed for use with the 300 AAC Blackout cartridge in both subsonic and supersonic. It fits under the rail of a Samson or similar rail system on the AR-15-type rifle, but can to perform acceptably on bolt action 7.62×51mm/.308 rifles as well), 762-AR10 Suppressor (designed for the AR-10/LAR-8 7.62mm/.308 rifle but will also work with any bolt-action rifle in .30 caliber or less) and 762-G3 Suppressor (designed for the Heckler & Koch G3 and fits the HK91 series of 7.62mm/.308 rifles, as well as the HK33 and HK93 series of 5.56×45mm rifles).[75]
Small-caliber suppressors: Long version for 9mm carbines[76] UTU for pistols, including M1911 and 9mm[77]	2013-11November 2013[71]	Muzzle device: Titanium pistol suppressor[76]	SLM w/ Titanium[72]	Oceania Defence Ltd.[72][71][73] and Rapid Advanced Manufacturing[74]	9x19mm Parabellum, .45 ACP
	Long version is designed to operate on 9×19mm Parabellum carbines firing fully automatic.[76] It fits under the rail of a Samson or similar rail system on the AR-15-type rifle.[76] This is a sealed can and is only suitable for use with jacketed bullets.[76] Pistol version is designed with a Neilsen which allows it to be used with most of the common John Browning tilting-barrel designs, including the swinging-linked M1911 and the cam-lock system operated Glock pistols. The Neilsen is an assembly in the aft end of the suppressor that allows the gasses to push the suppressor forward while allowing the unimpeded rearward movement of the barrel and slide assembly using a stainless steel spring and titanium piston.[77] It is able to function well with a wide range of ammo, although its sound reduction performs best with subsonic bullets heavier than 124 grains, with 147 or 158 grain bullets being the quietest.[77] It is designed to be run wet or dry, averaging 127.7–128.4 dBA with 147 grain or 127.6–134.2 dBA with 124 grain when dry and 123.1 dBA with 147 grain or 129.1 dBA with 124 grain when wet.[77] It is an additively manufactured titanium weapon suppressor. It is 50% lighter than some conventional steel suppressors[72]
The Israel drum magazine[78]	2013-12December 2013[78]	Magazine: AR-15 rifle 75-round STANAG drum magazine[78]	FDM	FOSSCAD members[78]	.223 Rem/ 5.56x45
	A 75-round drum magazine for .223 Remington/5.56 NATO AR-15 rifles.
The Yee drum magazine[78]	2013-12December 2013[78]	Magazine: AK-family drum magazine[78]	FDM	FOSSCAD members[78]	7.62x39mm
	75-round drum magazine for 7.62×39mm AK-pattern rifles (e.g. AK-47, AK-102, AK-104 and compatible variants).[78]
SKS grip and stock[15][79]	2014-05May 2014[15]	Part: SKS rifle grip and stock[15]	FDM	FOSSCAD members[15]
Škorpion vz. 61 grip and stock[15][79]	2014-05May 2014[15]	Part: Škorpion vz. 61 sub machinegun grip and stock[15]	FDM	FOSSCAD members[15]
NERO 556 Muzzle brake[80][81]	2018[80]	Muzzle device: AR-15 rifle muzzle brake[68]	DMLS[81] w/ Inconel[82]	Walker Defense Research[83][81]	.223 Rem/ 5.56x45
	"The idea was to create a muzzle brake with no equal; one that turns the recoil of an AR-15 into a slight push with zero muzzle rise."[80] Produced for 5.56x45mm (.223 Rem) or .224 Valkyrie[81] rifles with 1/2x28 threads.[80]
Menendez Mag[84]	2018-07August 2019 (v1); March 2021 (v2)	Part: Glock 17/19 Magazine	FDM	Deterrence Dispensed	9×19mm Parabellum
	Dry fire testing of the v2 design suggested a lifetime of over 1000 rounds.
A fully printable swift link that enables full-auto fire by pressing on the disconnector. Compatible with most AR-15 lowers. Classified as a machine gun by the ATF.[85]
'Make Glocks Full Auto' Glock Autosear[86][87]	April 2020	Part: Glock autosear	FDM	digitalmaniac / FreeMenDontAsk

Glossary of acronyms

FFF

Fused filament fabrication, a process that squeezes a molten filament.

FDM

Fused deposition modeling, a trademarked term for FFF.

DMLS / SLM

Direct metal laser sintering, a process that fuses metal powder by sintering.

SLM

Selective laser melting, a process that fuses metal powder by melting.

ABS

Acrylonitrile butadiene styrene, a common thermoplastic with relatively high heat resistance.

ABSplus is a stronger, proprietary blend of ABS by Stratasys.

PLA

Polylactic acid, a bio-plastic. Easier to print, stiffer, and more brittle than other plastics.

PLA+ is a term for any blend that enhances some characteristic.

PETG

Polyethylene terephthalate (glycol-modified), a plastic made by changing the chemicals used to synthesize the more common PET. Easier to print than ABS, and moderately better heat resistance than PLA.

Often used in consumer-level printers when creators desire better heat resistance than PLA+ or need more flexibility.

ECM

Electrochemical machining, a process that uses electricity to chemically machine metal. Commonly used in 3D printed firearms to create DIY barrels with rifling, greatly increasing accuracy.

FCG

Fire control group, the trigger mechanism of a firearm. Commonly used to refer to the AR-15 fire control group.

See also

• Gun control
• Gun politics in the United States
• Improvised firearm

References

1. "@empty_shell_llc on Instagram". 2023-03-14. Archived from the original on 2023-03-14. Retrieved 2024-02-10.
2. "Monolith Arms P-12 Shotgun - YouTube". YouTube. 2024-02-10. Archived from the original on 2024-02-10. Retrieved 2024-02-10.
3. "Monolith Arms P-12: The P-90-like Shotgun That Never Was -". The Firearm Blog. 2013-06-25. Retrieved 2024-02-10.
4. Greenberg, Andy (May 5, 2013). "Meet The 'Liberator': Test-Firing The World's First Fully 3D-Printed Gun". Forbes. Retrieved May 7, 2013.
5. 5 Different 3D Printed Gun Models Have Been Fired Since May, 2013 – Here They Are, 3D Print, September 10, 2014. (archive)
6. Morelle, Rebecca (May 6, 2013). "Working gun made with 3D printer". BBC News. Archived from the original on 4 September 2014. Retrieved 28 July 2013. ()
7. Hutchinson, Lee (3 May 2013). "The first entirely 3D-printed handgun is here". Ars Technica. Retrieved 13 May 2013.
8. 3D Printing Guns off the Download – Fact or Fiction?, inhale3d, May 7, 2013. (archive)
9. "Liberator" gun made with 3D printer fires first successful shot, CBS NEWS, May 6, 2013. "...Stratasys Dimension SST 3D printer" (archive)
10. First 3-D printed rifle fires bullet, then breaks, NBC News, July 26, 2013. (archive)
11. World's first 3D-printed rifle gets update, fires 14 shots, The Verge, August 4, 2013.(archive)
12. G22 Grizzly v3 specs, Defcad
13. Introducing the 3D-printed Reprringer Pepperbox (VIDEO), guns.com, September 13, 2013. (archive)
14. 3D Printed Pepperbox Pistol, firearmblog, October 8, 2013. (archive)
15. 3D printed guns a year on: from prototype to serious weapons, Wired, 16 May 2014. (archive)
16. First metal 3D printed gun is capable of firing 50 shots, The Guardian, November 8, 2013. (archive)
17. Solid Concepts 3D-printed 1911 gets version 2.0, Guns.com, November 20, 2013. (archive)
18. Japanese Man Arrested For Printing His Own Revolvers, Tech Crunch, May 8, 2014. (archive)
19. New 3D printed revolver dedicated to Yoshitomo Imura in development, 3Ders, Sep 24 2014. (archive)
20. Designer Builds A 3D-Printable "Imura Revolver" In Honor Of Arrested Japanese Maker, TechCrunch, Sep 24 2014. (archive)
21. A New 3D Printable Gun, The ‘Imura Revolver’ is Being Designed, September 22, 2014. (archive)
22. 5 Alarming 3D Printed Guns, Versus, September 26, 2014. (archive)
23. The Next Phase: 3D Printed Imura Revolver Hybrid Development, Truth about Guns, September 15, 2014. (archive)
24. "Solid Concepts 3D Prints Another Metal Gun, 'Reason', a 10mm Auto 1911". 3DPrint.com. 26 October 2014. Retrieved 5 December 2014.
25. "Solid Concepts Announces Another 3D-Printed Metal Gun". TechCrunch. AOL. 27 October 2014. Retrieved 5 December 2014.
26. "3ders.org - the world's second 3D printed metal gun revealed: The 'Reason' | 3D Printer News & 3D Printing News". Archived from the original on 2014-11-01. Retrieved 2014-11-16.
27. "3D printing used to make first real handheld railgun, which fires plasma projectiles at 560 mph". October 19, 2015. Retrieved 5 August 2016.
28. "Guy creates handheld railgun with a 3D-printer". October 19, 2015. Retrieved 5 August 2016.
29. "PG22 - Reliable 3D Printed Gun with a Steel Barrel". YouTube.
30. "Full-Auto 3D Printed Coilgun (Now Available!)". YouTube. 8 July 2018.
31. "You Can Now Buy a Practical Gauss Gun". July 12, 2018. Retrieved March 6, 2019.
32. C, Luke (2022-03-04). "The Pipe Hitter: TFB Reader Makes a DIY 37MM Launcher". The Firearm Blog. Retrieved 2024-01-18.
33. Denise Bertacchi (2023-12-23). "I tried 3D printing a gun: It's not as easy as you think". Tom's Hardware. Retrieved 2024-01-18.
34. Murney, Michael (2022-08-02). "Man sells dozens of 3D-printed guns to city at Houston's 1st gun buyback". Chron. Retrieved 2023-12-21.
35. "The Urutau". Odysee. Retrieved 2024-08-27.
36. Biggs, John (March 1, 2013). "Defense Distributed Prints An AR-15 Receiver That Has Fired More Than 600 Rounds". TechCrunch. Archived from the original on August 25, 2014. Retrieved April 12, 2013. ()
37. Printed AR Lower v5 Review, Defense Distributed official tumblr blog (archive)
38. 3D-printed Hybrid AR-15/FN P90 Lower and 12 Gauge Slugs Make Web Debut, outdoorhub, May 22, 2013. (archive)
39. Slowik, Max, Meet the Charon Family of 3D-Printable AR Lowers (Photos), 3 June 2013.
40. Slowik, Max, "3D Printing Community Updates Liberator with Rifle, Pepperbox and Glock-Powered ‘Shuty-9′", 1 July 2013.
41. Charon V3, grabcad, September 3, 2013. (archive)
42. WarFairy’s 3D Printable AR-15 Bullpup, firearmblog, May 27, 2014. (archive)
43. Check out this 3D-printable bullpup for AR-pattern uppers, Guns.com, May 27, 2014. (archive)
44. 3D Printed Semi-automatic Ruger Charger Pistol is Assembled and Fired – ‘If you take my gun, I’ll print another!’, 3Dprint, July 4, 2014. (archive)
45. 3D-Printed Semiautomatic .22 Debuts. "If you take my gun, I will simply print another one.", Reason, July 2014. (archive)
46. 3D Printed Ruger Style Pistol Demo by Buck O’ Fama ~ Video, Ammoland, July 4, 2014. (archive)
47. 3D Printing Lets Man Assemble Ruger Charger Pistol Without Legal Paperwork, Softpedia, July 8, 2014. (archive)
48. Great, now 3D-printed rifles can fire larger, deadlier rounds
49. (in Turkish) 3D Yazıcıdan Üretilen Ölümcül Tüfek!
50. C, Luke (2019-12-09). "This 3D Printed Hi-Point May Be the Cheapest Pistol in Existence". The Firearm Blog. Retrieved 2024-01-18.
51. "The AWCY 3D Printed Scz0rpion - Is a 3D printed Sub Gun Viable?". The Firearm Blog. 2020-10-29. Retrieved 2024-01-18.
52. "The AWCY 3D Printed Scz0rpion - Is a 3D printed Sub Gun Viable?". The Firearm Blog. 2020-10-29. Retrieved 2020-11-19.
53. "AWCY? Scz0rpion 1000 rd crucible test". gunstreamer.com. Retrieved 2020-11-19.
54. "Ivan The Troll Introduces the 3011 Pistol - A 1911 that "Doesn't Suck"". The Firearm Blog. 2021-09-10. Retrieved 2024-01-18.
55. "PD10 Pistol". Avidity Arms. Retrieved 2024-01-18.
56. Arms, Avidity (2023-05-09). "3DPD10 Parts Kit at JSD Supply!". Avidity Arms. Retrieved 2023-12-21.
57. Branson, Michael (April 8, 2013). "Defense Distributed Releases Printable AK Magazine". The Firearm Blog. Archived from the original on September 24, 2014. Retrieved April 12, 2013.. ()
58. Greenberg, Andy (January 14, 2013). "Gunsmiths 3D-Print High Capacity Ammo Clips To Thwart Proposed Gun Laws". Forbes Online. Archived from the original on August 30, 2014. Retrieved April 12, 2013. ()
59. A Printed AR-15 Magazine, Ammoland.com, March 05 2013. (archive)
60. Franzen, Carl (February 7, 2013). "Defense Distributed Unveils New 3D Printed Gun Magazine 'Cuomo' (video)". Talking Points Memo. Archived from the original on February 11, 2013. Retrieved April 12, 2013.
61. Beckhusen, Robert (February 8, 2013). "New 3-D Printed Rifle Magazine Lets You Fire Hundreds of Rounds". Wired Danger Room. Retrieved April 12, 2013.
62. 3D-printed 30-round AR magazine brings us ever closer to a fully 3D-printed gun, Extreme Tech, January 14, 2014. (archive)
63. Ingersoll, Geoffrey (March 8, 2013). "3D Printing Company Names AK-47 Magazine After Gun Control Congresswoman". Business Insider. Archived from the original on September 24, 2014. Retrieved April 12, 2013. ()
64. Defense Distributed's 'Feinstein AK Magazine' Named After Gun Control Advocate Sen. Dianne Feinstein, Huffington Post, August 8, 2013. (archive)
65. 3D-Printed Gun's Blueprints Downloaded 100,000 Times In Two Days (With Some Help From Kim Dotcom), forbes.com, August 5, 2013. (archive)
66. 3-D Printed Shotgun Slugs Blow Away Their Targets, Wired, May 22, 2013. (archive)
67. 3D-Printed Bullets Exist, And They're Terrifyingly Easy To Make, huffingtonpost, May 23, 2013. (archive)
68. Sintercore creates first commercial 3D printed metallic firearm component, Gizmag, July 30, 2013. (archive)
69. Sintercore 3DX Muzzle Brake, thefirearmblog, August 26, 2014.(archive)
70. 556 Suppressors Archived 2014-09-11 at the Wayback Machine, Oceania Defence. (archive)
71. "Hi-tech printers at home in Bay". New Zealand Herald. 20 November 2013. Archived from the original on 10 September 2014. Retrieved 9 September 2014.
72. New Zealand leads the way in Titanium Additive Manufacturing, Metal Additive Manufacturing, May 12, 2014. (archive)
73. Silencing the sound, Layer by layer Video, 3d Printing Systems. (archive)
74. TiDA Talk, Titanium Industry Development Association, July 2013. (archive)
75. 762 Suppressor Archived 2014-09-10 at the Wayback Machine, Oceania Defence. (archive)
76. 9mm Carbine Long Archived 2014-09-10 at the Wayback Machine, Oceania Defence. (archive)
77. UTU 9mm Titanium Pistol Suppressor with Neilsen Archived 2014-09-10 at the Wayback Machine, Oceania Defence. (archive)
78. 3D-printed 75-round drum mags: Meet the ‘Israel’ and the ‘Yee’ (Photos + Video), guns.com, December 23, 2013. (archive)
79. A Dark Side of 3D Printers: Printed Guns, natocouncil, August 30, 2014. (archive)
80. "First Look: Walker Defense Research NERO Tactical Muzzle Brake". Personal Defense World. 2018-12-06. Retrieved 2019-02-04.
81. "NERO 556 | AR15 Muzzle Brake, 3D Printed Inconel". Walker Defense Research LLC. Retrieved 2019-02-04.
82. "VIDEO: The Walker Defense NERO 556 Brake Rocks in Full-Auto". Tactical Life Gun Magazine: Gun News and Gun Reviews. 2018-05-24. Retrieved 2019-02-04.
83. "Product Preview: Walker Defense Research NERO 556 Tactical Muzzle Brake". www.americanrifleman.org. Retrieved 2019-02-04.
84. Pete (2019-07-19). "Can't Stop The Signal: DIY 3D Printed GLOCK Magazines". The Firearm Blog. Retrieved 2024-01-18.
85. "1981-4 - Auto Sear | Bureau of Alcohol, Tobacco, Firearms and Explosives". www.atf.gov. Retrieved 2023-12-21.
86. "'Make Glocks Full Auto' Glock autosear". Odysee. Retrieved 2023-12-21.
87. "Law enforcement and lawmakers target 3D-printed devices that turn handguns into machine guns". WRTV Indianapolis. 2023-04-12. Retrieved 2024-01-18.

External links

• DEFCAD, the world’s largest repository for small arms technical data, July 2024