Remove ads
Automobile produced by General Motors-Holden in Australia from 1963 to 1965 From Wikipedia, the free encyclopedia
The Holden EH is an automobile produced by General Motors-Holden in Australia from 1963 to 1965. The EH was released in August 1963[1] replacing the Holden EJ series, and was the first Holden to incorporate the new "Red" engine, with a seven main bearing crankshaft instead of the four main bearing crankshaft used in the "Grey" engine. At first, a larger capacity 149-cubic-inch (2,440 cc) engine was only sold attached to a three-speed manual gearbox or the "Hydramatic" four-stage automatic transmission with a column shift. The Controlled Coupling Hydramatic used in the EH was actually a four-stage, although it effectively worked as a three-speed unit, except at full throttle.[2] The 179-cubic-inch (2,930 cc) engine was initially sold only with the "Hydramatic" transmission. The first EH with a 179-cubic-inch engine and a manual gear box was called the "EH-S4", and was fitted with an upgraded manual gearbox, having stronger gears than in the 149 gear box, and an upgraded clutch. The three-speed manual column shift gearboxes had no synchromesh on first gear, only on the second and third (top) gear. Mainstream release of the 179 engine mated to the 3 speed manual transmission option occurred on the 10th February 1964.
Holden EH | |
---|---|
Overview | |
Manufacturer | General Motors-Holden's |
Also called | Holden Standard Holden Special Holden Premier Holden Utility Holden Panel Van |
Production | August 1963–February 1965 |
Designer | Stan Parker |
Body and chassis | |
Class | Mid-size |
Body style | 4-door sedan 5-door station wagon 2-door coupé utility 2-door panel van |
Layout | FR layout |
Powertrain | |
Engine | 2.4L GMH '149' I6 2.9L GMH '179' I6 |
Transmission | 3spd manual 3spd "Hydra-Matic" automatic |
Dimensions | |
Wheelbase | 106.0 inches (2692mm) |
Length | 177.6 inches (4511mm) |
Width | 68.0 inches (1727mm) |
Height | 58.2 inches (1478mm) |
Curb weight | 2464lb (1118kg) |
Chronology | |
Predecessor | Holden EJ |
Successor | Holden HD |
A total of 256,959 EH Holdens were produced and sold from 1963 to 1965, when the EH was replaced by the Holden HD series.
The Holden EH range was offered in the following models:[3]
The Station Sedan name was used on all station wagon models.
"Standard" models were basic, with no side badging, and were mostly fitted with 149-cubic-inch engines, rubber floor mats and single-tone acrylic paint finish. "Special" models came equipped with stainless moulding strips all round, special badges and optional two-tone paint jobs, still in acrylic paint. The "Premier" was the top of the range model, with a 179-cubic-inch engine and Hydramatic transmission, leather interior, bucket seats, fold-down centre armrest in the back seat, carpets, metallic paint, a centre console incorporating a heater/demister, a handbrake warning light, a boot light (in sedan models) and chrome-plated wheel trims. Contrary to popular belief a car radio was not standard equipment for the Premier. The Standard EH was the same price as its predecessor (EJ) at £1051.
The "S4 Special" was introduced in September 1963 for racing homologation purposes - a minimum of 100 were required to be built & sold. These featured a 179 engine, manual transmission with hardened gears, a 12 imp gal (55 L) fuel tank (9 imp gal (41 L) was standard), a more comprehensive tool kit, metal lined brake shoes and a larger tailshaft.[6] Six were produced at Holden's Melbourne's (Dandenong) plant and 120 in Sydney's (Pagewood) plant.[7]
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.