Gal (unit)

Not to be confused with gallon.

The gal (symbol: Gal), sometimes called galileo after Galileo Galilei, is a unit of acceleration typically used in precision gravimetry.^[2][3][4] The gal is defined as 1 centimeter per second squared (1 cm/s²). The milligal (mGal) and microgal (μGal) are respectively one thousandth and one millionth of a gal.

gal
Earth's gravity measured by NASA GRACE mission, showing deviations from the theoretical gravity of an idealized smooth Earth, the so-called earth ellipsoid. Red shows the areas where gravity is stronger than the smooth, standard value, and blue reveals areas where gravity is weaker. (Animated version.)[1]
General information
Unit system	CGS units
Unit of	Acceleration
Symbol	Gal
Named after	Galileo Galilei
Conversions
1 Gal in ...	... is equal to ...
CGS base units	1 cm/s2
SI units	0.01 m/s2
Imperial, US customary	0.03280840 ft/s2

Gravity anomalies covering the Southern Ocean are shown here in false-color relief. Amplitudes range between −30 mGal (magenta) to +30 mGal (red). This image has been normalized to remove variation due to differences in latitude.

The gal is not part of the International System of Units (known by its French-language initials "SI"). In 1978 the CIPM decided that it was permissible to use the gal "with the SI until the CIPM considers that [its] use is no longer necessary".^[3][5] Use of the gal was deprecated by the standard ISO 80000-3:2006, now superseded.

The gal is a derived unit, defined in terms of the centimeter–gram–second (CGS) base unit of length, the centimeter, and the second, which is the base unit of time in both the CGS and the modern SI system. In SI base units, 1 Gal is equal to 0.01 m/s².

The acceleration due to Earth's gravity at its surface is 976 to 983 Gal, the variation being due mainly to differences in latitude and elevation. Standard gravity is 980.665 Gal. Mountains and masses of lesser density within the Earth's crust typically cause variations in gravitational acceleration of tens to hundreds of milligals (mGal). The gravity gradient (variation with height) above Earth's surface is about 3.1 μGal per centimeter of height (3.1×10⁻⁶ s⁻²), resulting in a maximal difference of about 2 Gal (0.02 m/s²) from the top of Mount Everest to sea level.^[6]

Unless it is being used at the beginning of a sentence or in paragraph or section titles, the unit name gal is properly spelled with a lowercase g. As with the torr and its symbol, the unit name (gal) and its symbol (Gal) are spelled identically except that the latter is capitalized.

Conversions

Conversions between common units of acceleration

Base value	(Gal, or cm/s2)	(ft/s2)	(m/s2)	(Standard gravity, g0)
1 Gal, or cm/s2	1	0.0328084	0.01	1.01972×10−3
1 ft/s2	30.4800	1	0.304800	0.0310810
1 m/s2	100	3.28084	1	0.101972
1 g0	980.665	32.1740	9.80665	1

See also

• Earth's gravity
• Eotvos (unit)
• g-force (g)
• Gravimetry
• Gravity
• Gravitational constant (G)
• Gravitational field
• Gravity gradiometry

References

1. NASA/JPL/University of Texas Center for Space Research. "PIA12146: GRACE Global Gravity Animation". Photojournal. NASA Jet Propulsion Laboratory. Retrieved 30 December 2013.
2. Barry N. Taylor, Guide for the Use of the International System of Units (SI), 1995, NIST Special Publication 811, Appendix B.
3. BIPM SI brochure, 8th ed. 2006, Table 9: Non-SI units associated with the CGS and the CGS-Gaussian system of units Archived 2007-10-18 at the Wayback Machine.
4. Some sources, such as the University of North Carolina Archived 2012-02-18 at the Wayback Machine, the European Space Agency, and ConversionTables.com Archived 2009-05-19 at the Wayback Machine state that the unit name is "galileo". The NIST and the BIPM are here considered as more authoritative sources regarding the proper unit name.
5. NIST Guide to SI Units; Section 5, Units Outside the SI; Subsection 5.2: Units temporarily accepted for use with the SI.
6. Gravity Measurements Archived 2009-03-06 at the Wayback Machine. University of Calgary. Accessed Nov 21, 2009.