Top Qs
Timeline
Chat
Perspective
Dulwich Hill railway station
Railway station in Sydney, Australia From Wikipedia, the free encyclopedia
Remove ads
Dulwich Hill railway station is a heritage-listed railway station serving the Sydney suburb of Dulwich Hill. It located on the Bankstown line and is also the terminus of the Inner West Light Rail line, the heavy and light rail platforms being connected by an elevated concourse.
Remove ads
Remove ads
History
Dulwich Hill station opened on 1 February 1895 as Wardell Road when the Bankstown line opened from Sydenham to Belmore. It was renamed Dulwich Hill on 1 July 1920.[3][4]
To the north of the heavy rail platforms lie two tracks that are part of the Metropolitan Goods line. Opposite the platform lay a triangular junction that connected the Metropolitan Goods line to a branch to Rozelle.[5] The branch was converted to light rail after goods traffic ceased, reopening on 27 March 2014 and terminating at Dulwich Hill.[6]
The station has two heavy rail platforms in an island platform configuration, the only station on the section running parallel to the goods line not to be converted to side platforms. The station buildings date from 1935.[4]
In October 2023, a new western concourse opened, providing lift access and transfer to the light rail platform.[7]
The station closed on 30 September 2024 as part of works to convert the Bankstown line to Sydney Metro.[8]
Remove ads
Platforms and services
| Platform | Line | Stopping pattern | Notes |
| 1 | services to Tallawong (from 2025) | ||
|---|---|---|---|
| 2 | services to Bankstown (from 2025) |
Light rail
Summarize
Perspective
The light rail terminus sits at the end of Bedford Crescent, where the Rozelle branch line joined the main Metropolitan Goods railway line.[9]
History
During the planning process, the design was altered after a review favoured moving the stop to the end of Bedford Crescent rather than the platform being parallel to the heavy rail lines.[11][12] This final design includes a single side platform and is further away from the heavy rail platforms than the original proposal, but includes a connection to Jack Shanahan Park on the western side of the light rail alignment, which improved access to the park from the east and access to the stop from the west. Other improvements cited were reduced construction cost and environmental impact due to the elimination of the extensive work required to widen the cutting under the original proposal, and the reduced need to interface with RailCorp assets.[13]
As patronage on the line increased, the single track terminus at Dulwich Hill came to limit the number of services on the line, with frequency unable to be less than every eight minutes. In 2017, Transport for NSW promised to consider upgrading the line to allow more services, including looking at the Dulwich Hill terminus.[14]
Transport links
Transit Systems operates one bus route via Dulwich Hill station, under contract to Transport for NSW:
- 412: Martin Place to Campsie station[15]
Dulwich Hill station is served by one NightRide route:
Future
Dulwich Hill will be converted to a Metro station as part of the second stage of the Sydney Metro City & Southwest. The Metro will significantly increase the frequency of service to 15 trains an hour and shorten the trip to the city by up to 4 minutes.[17]
Gallery
Northern entrance on Bedford Crescent
Eastern entrance on Wardell Road
Western concourse, connecting the metro and light rail platforms
Light rail platform
References
External links
Wikiwand - on
Seamless Wikipedia browsing. On steroids.
Remove ads