Loading AI tools
Passenger train that separates into two along its route From Wikipedia, the free encyclopedia
A dividing train is a passenger train that separates into two trains partway along its route, so as to serve two destinations. Inversely, two trains from different origins may be coupled together mid-route to reach a common endpoint. Trains on complex routes may divide or couple multiple times. The general term for coupling two or more trains along their shared route sections is portion working.
For example, the westbound Empire Builder travels from Chicago Union Station to Spokane, Washington, where its cars are divided into two trains: one continues to Portland Union Station and one to King Street Station, Seattle. On the eastbound trip, trains from Portland and Seattle are coupled at Spokane before traveling as one train to Chicago.
Dividing trains are useful where line capacity is limited, allowing multiple trains to use the same path over a congested part of a network. The common sections will often be the busiest parts of the routes.
On the initial leg of its journey, the train is driven as normal by a single crew. At a designated station before a junction, the train stops and some of the cars are detached, with passengers or goods still on board. The front part of the train then departs to run the remainder of its route. A second train is then formed from the detached cars, the points are changed at the junction, and a new crew drives the train on a different route to a second destination. Where the train is formed of multiple units – self-contained trainsets with their own propulsion and driving cabs – two or more units work in multiple on the first leg. After detachment, the second crew drives in the trailing unit's front cab.
On the return journey, the two trains may join at the same station where they divided. Special signalling is required at the station to allow a following train to enter the block currently occupied by the train in front in order for the two to couple. The British rail network uses a shunt signal to authorize this type of movement.[1]
A variety of portion working combinations is possible. For example:
For portion working to be successful, the operator may need to address many issues. For example:
Dividing trains can sometimes cause issues for unwary travellers, who may board the wrong car and thus arrive at an unexpected destination.[3]
Route[6] | From | Dividing at | Destination |
---|---|---|---|
Montreal–Senneterre train | Montreal Central Station | Hervey-Jonction station | Senneterre station |
Montreal–Jonquière train | Jonquière station |
There are several dividing train services in Japan, and each route has its own name.
Route | From | Dividing at | Destination | Remarks |
---|---|---|---|---|
Komachi | Tokyo Station | Morioka Station | Akita Station | Shinkansen high-speed train services |
Hayabusa | Shin-Hakodate-Hokuto Station | |||
Sunrise Izumo | Tokyo Station | Okayama Station | Izumoshi Station | Overnight sleeper services |
Sunrise Seto | Takamatsu Station | |||
Narita Express | Narita Airport | Tokyo Station | Yokohama, Ōfuna | Airport rail link |
Shinjuku, Ōmiya, Takao |
The practice of portion working has been followed for a long time on the third rail network of lines in the South East of England, and has been more widely practised in continental Europe.[2] Elsewhere in the United Kingdom, the practice has been less common, because of a general reluctance to design the necessary modern signalling systems, and because of legal constraints on competition between operators.[7]
Dividing trains operate on several lines on the British railway network, mainly (although not exclusively) in the south of the country. To ensure consistent journey times, the front part of a dividing train usually becomes the rear of the returning service when it reunites.
In addition, some services detach carriages part-way along the route, and pick them back up on the return journey. This may be because a portion of the line has short platforms at a number of its stations, or because demand is much higher on one section than another.
Route | From | Dividing at | Destination | Remarks |
---|---|---|---|---|
Arun Valley line[8] | London Victoria | Crawley or Horsham | Front part non-stop to Barnham, then major stations to Portsmouth Harbour or Southampton Central | On Sundays calls at all stations to Barnham and divides there. |
Rear part most or all stations to Bognor Regis | ||||
Caledonian Sleeper[9] (Lowland) | London Euston | Carstairs | Front part to Edinburgh Waverley | |
Rear part to Glasgow Central | ||||
Caledonian Sleeper (Highland) | Edinburgh Waverley | Front part to Inverness | ||
Middle part to Aberdeen | ||||
Rear part to Fort William | ||||
Cambrian Coast Line | Birmingham New Street | Machynlleth | Front part to Aberystwyth | Both parts call at Dovey Junction, but use separate platforms there, and therefore must divide one stop earlier. |
Rear part to Pwllheli | ||||
Caterham line Tattenham Corner line |
London Bridge | Purley | Front part to Caterham | Colloquially known as the "Cat & Tat". Was the most common service pattern on the branches from Purley before resignalling work made them an extension of the Brighton Main Line local tracks. |
Rear part to Tattenham Corner | ||||
Chatham Main Line[10] | London Victoria | Faversham | Front part to Ramsgate | |
Rear part to Dover Priory | ||||
East Coastway Line | Eastbourne | Front terminates at Eastbourne | ||
Rear part to Ore | ||||
South West Main Line | London Waterloo | Southampton Central or Bournemouth | Front 5 carriages to Weymouth | Most Dorset stations beyond Bournemouth have short platforms. As far as Poole the front train forms the principal express service on a heavily trafficked line, while the rear train operates as a stopping service. |
Last 5 carriages to Poole or Bournemouth | ||||
Eastleigh | Front 5 carriages to Poole | Sunday service | ||
Rear 5 carriages to Portsmouth Harbour | ||||
West of England Main Line | London Waterloo | Salisbury | Front part to Exeter St Davids | |
Rear part terminates at Salisbury |
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.