Compliance constants

Compliance constants are the elements of an inverted Hessian matrix. The calculation of compliance constants provides an alternative description of chemical bonds in comparison with the widely used force constants explicitly ruling out the dependency on the coordinate system. They provide the unique description of the mechanical strength for covalent and non-covalent bonding. While force constants (as energy second derivatives) are usually given in aJ/Ų or N/cm, compliance constants are given in Ų/aJ or Š/ mdyn.

History

Hitherto, recent publications^[1] that broke the wall of putative chemical understanding and presented detection/isolation of novel compounds with intriguing bonding characters can still be provocative at times.^[2][3][4] The stir in such discoveries arose partly from the lack of a universally accepted bond descriptor. While bond dissociation energies (BDE) and rigid force constants have been generally regarded as primary tools for such interpretation, they are prone to flawed definition of chemical bonds in certain scenarios whether simple^[4][5] or controversial.^[6][7]

Such reasons prompted the necessity to seek an alternative approach to describe covalent and non-covalent interactions more rigorously. Jörg Grunenberg [de], a German chemist at the TU Braunschweig and his Ph.D. student at the time, Kai Brandhorst, developed a program COMPLIANCE^[8] (freely available to the public), which harnesses compliance constants for tackling the aforementioned tasks. The authors use an inverted matrix of force constants, i.e., inverted Hessian matrix, originally introduced by W. T. Taylor and K. S. Pitzer.^[9] The insight in choosing the inverted matrix is from the realization that not all elements in the Hessian matrix are necessary—and thus redundant—for describing covalent and non-covalent interactions. Such redundancy is common for many molecules,^[10] and more importantly, it ushers in the dependence of the elements of the Hessian matrix on the choice of coordinate system. Therefore, the author claimed that force constants albeit more widely used are not an appropriate bond descriptor whereas non-redundant and coordinate system-independent compliance constants are.^[5][11]

Theory

Force constants

By Taylor series expansion, the potential energy, ${\displaystyle V}$, of any molecule can be expressed as:^[5][11]

${\displaystyle V=V_{0}+G^{T}Z+{1 \over 2}Z^{T}HZ+...}$ (eq. 1)

where ${\displaystyle Z}$ is a column vector of arbitrary and fully determined displacement coordinates, and ${\displaystyle G}$ and ${\displaystyle H}$ are the corresponding gradient (first derivative of ${\displaystyle V}$) and Hessian (second derivative of ${\displaystyle V}$), respectively. The point of interest is the stationary point on a potential energy surface (PES), so ${\displaystyle G}$ is treated as zero, and by considering the relative energy, ${\displaystyle V_{0}}$ as well becomes zero. By assuming harmonic potential and regarding the third derivative term and forth as negligible, the potential energy formula then simply becomes:

${\displaystyle V={1 \over 2}Z^{T}HZ}$ (eq. 2)

Transitioning from cartesian coordinates ${\displaystyle Z}$ to internal coordinates ${\displaystyle Q}$, which are more commonly used for the description of molecular geometries, gives rise to equation 3:

${\displaystyle V={1 \over 2}Q^{T}H_{q}Q}$ (eq. 3)

where ${\displaystyle H_{q}}$ is the corresponding Hessian for internal coordinates (commonly referred to as force constants), and it is in principle determined by the frequencies of a sufficient set of isotopic molecules. Since the Hessian ${\displaystyle H_{q}}$ is the second derivative of the energy with respect to displacements and that is the same as the first derivative of the force, evaluation of this property as shown in equation 4 is often used to describe chemical bonds.

${\displaystyle H_{q}={\biggl (}{\partial ^{2}V \over \partial Q_{i}\partial Q_{j}}{\biggr )}_{0}}$ (eq. 4)

Nevertheless, there are several issues with this method as explained by Grunenberg,^[5] including the dependence of force constants on the choice of internal coordinates and the presence of the redundant Hessian which has no physical meaning and consequently engenders ill-defined description of bond strength.

Compliance constants

Rather than internal displacement coordinates, an alternative approach to write the potential energy of a molecule as explained by Decius^[12] is to write it as a quadratic form in terms of generalized displacement forces (negative gradient) ${\displaystyle G_{q}}$.

${\displaystyle V={1 \over 2}{G_{q}}^{T}CG_{q}}$ (eq. 5)

This gradient ${\displaystyle G_{q}}$ is the first derivative of the potential energy with respect to the displacement coordinates, which can be expressed as shown:

${\displaystyle G_{q}=H_{q}Q}$ (eq. 6)

By substituting the expression of ${\displaystyle G_{q}}$ in eq. 5 into equation 5, equation 7 is obtained.

${\displaystyle V={1 \over 2}Q^{T}{H_{q}}^{T}CH_{q}Q}$ (eq. 7)

Thus, with the knowledge that ${\displaystyle H_{q}}$ is positive definite, the only possible value of ${\displaystyle C}$ which is the compliance matrix then must be:

${\displaystyle C={H_{q}}^{-1}}$ (eq. 8)

Equation 7 offers a surrogate formulation of the potential energy which proves to be significantly advantageous in defining chemical bonds. Specially, this method is independent on coordinate selection and also eliminates such issue with redundant Hessian that the common force constant calculation method suffers with. Intriguingly, compliance constants calculation can be employed regardless of the redundancy of the coordinates.

Archetype of compliance constants calculation

Cyclobutane: force constants calculations

To illustrate how choices of coordinate systems for calculations of chemical bonds can immensely affect the results and consequently engender ill-defined descriptors of the bonds, sample calculations for n-butane and cyclobutane are shown in this section.^[5] Note that it is known that the all the four equivalent C-C bonds in cyclobutane are weaker than any of the two distinct C-C bonds in n-butane;^[13] therefore, juxtaposition and evaluation of the strength of the C-C bonds in this C4 system can exemplify how force constants fail and how compliance constants do not. The tables immediately below are results that are calculated at MP2/aug-cc-pvtz level of theory^[14][15] based on typical force constants calculation.

Table 1. Force constants (N/cm) of n-butane in natural internal coordinates and z-matrix coordinates

n-butane

Natural Internal Coordinates					Z-matrix Coordinates
	1-2	2-3	3-4			1-2	2-3	3-4
1-2	4.708				1-2	4.708
2-3	0.124	4.679			2-3	0.124	4.679
3-4	0.016	0.124	4.708		3-4	0.016	0.124	4.708

Table 2. Force constants (N/cm) of cyclobutane in natural internal coordinates and z-matrix coordinates

cyclobutane

Natural Internal Coordinates						Z-matrix Coordinates
	1-2	2-3	3-4	4-1			1-2	2-3	3-4	4-1
1-2	4.173					1-2	4.914
2-3	0.051	4.173				2-3	-0.459	4.906
3-4	0.155	0.051	4.173			3-4	-0.864	0.813	5.504
4-1	0.051	0.155	0.051	4.173		4-1	0.786	-0.771	-0.976	5.340

Tables 1 and 2 display a force constant in N/cm between each pair of carbon atoms (diagonal) as well as the coupling (off-diagonal). Considering natural internal coordinates on the left, the results make chemical sense. Firstly, the C-C bonds are n-butane are generally stronger than those in cyclobutane, which is in line with what is expected.^[13] Secondly, the C-C bonds in cyclobutane are equivalent with the force constant values of 4.173 N/cm. Lastly, there is little coupling between the force constants as seen as the small compliance coupling constants in the off-diagonal terms.

However, when z-matrix coordinates are used, the results are different from those obtained from natural internal coordinates and become erroneous. The four C-C bonds all have distinct values in cyclobutane, and the coupling becomes much more pronounced. Significantly, the force constants of the C-C bonds in cyclobutane here are also larger than those of n-butane, which is in conflict with chemical intuition.^[13] Clearly for cyclobutane—and numerous other molecules, using force constants therefore gives rise to inaccurate bond descriptors due to its dependence on coordinate systems.

Cyclobutane: compliance constants calculations

A more accurate approach as claimed by Grunenberg^[5] is to exploit compliance constants as means for describing chemical bonds as shown below.

Table 3. Compliance constants (N⁻¹) of n-butane in natural internal coordinates and z-matrix coordinates

n-butane

Natural Internal Coordinates					Z-matrix Coordinates
	1-2	2-3	3-4			1-2	2-3	3-4
1-2	0.230				1-2	0.230
2-3	-0.010	0.233			2-3	-0.010	0.233
3-4	0.002	-0.010	0.230		3-4	0.002	-0.010	0.230

Table 4. Compliance constants (N⁻¹) of cyclobutane in natural internal coordinates and z-matrix coordinates

cyclobutane

Natural Internal Coordinates						Z-matrix Coordinates
	1-2	2-3	3-4	4-1			1-2	2-3	3-4	4-1
1-2	0.255					1-2	0.255
2-3	-0.006	0.255				2-3	-0.006	0.255
3-4	-0.010	-0.006	0.255			3-4	-0.010	-0.006	0.255
4-1	-0.006	-0.010	-0.006	0.255		4-1	-0.006	-0.010	-0.006	0.255

All the calculated compliance constants above are given in N⁻¹ unit. For both n-butane and cyclobutane, the results are the same regardless of the choice of the coordinate systems. One aspect of compliance constants that proves more powerful than force constants in cyclobutane is because of less coupling. This compliance coupling constants are the off-diagonal elements in the inverted Hessian matrix and altogether with the compliance constants, they physically describe the relaxed distortion of a molecule closely through a minimum energy path. Moreover, the values of the compliance constants yield the same results for all the C-C bonds and the values are less compared to those obtained for n-butane. Compliance constants, thus, give results that are in accordance to what are generally known about the ring strain of cyclobutane.^[13]

Applications to main group compounds

Diboryne

Diboryne or a compound with boron-boron triple bond was first isolated as a N-heterocyclic carbene supported complex (NHC-BB-NHC) in the Braunschweig group,^[1] and its unique, peculiar bonding structure thereupon catalyzed new research to computationally assess the nature of this at that time controversial triple bond.

A few years later, Köppe and Schnöckel published an article arguing that the B-B bond should be defined as a 1.5 bond based on thermodynamic view and rigid force constant calculations.^[2] That same year, Grunenberg reassessed the B-B bond using generalized compliance constants of which he claimed better suited as a bond strength descriptor.^[4]

Relaxed force constant of B-B bonds supported by NHC ligands computed at BP86/dz level of theory

Compound	Relaxed Force Constant (mdyn / Å)	Bond
NHC-H2BBH2-NHC	1.5	single
NHC-HBBH-NHC	3.8	double
NHC-BB-NHC	6.5	triple

The calculated relaxed force constants show a clear trend as the bond order between the B-B bond increases, which advocates the existence of the triple bond in Braunschweig's compound.

Digallium bonds

Grunenberg and N. Goldberg^[16] probed the bond strength of a Ga-Ga triple bond by calculating the compliance constants of digallium complexes with a single bond, a double bond, or a triple bond. The results show that the Ga-Ga triple bond of a model Na₂[H-GaGa-H] compound in C_2h symmetry has a compliance constant value of 0.870 aJ/Ų is in fact weaker than a Ga-Ga double bond (1.201 aJ/Ų).

Watson-Crick base pairs

Besides chemical bonds, compliance constants are also useful for determining non-covalent bonds, such as H-bonds in Watson-Crick base pairs.^[17] Grunenberg calculated the compliance constant for each of the donor-H⋯acceptor linkages in AT and CG base pairs and found that the central N-H⋯N bond in CG base pair is the strongest one with the compliance constant value of 2.284 Å / mdyn. (Note that the unit is reported in a reverse unit.) In addition, one of the three hydrogen bonding interactions in a AT base pair shows an extremely large compliance value of >20 Å / mdyn indicative of a weak interaction.

References

1. Braunschweig, Holger; Dewhurst, Rian D.; Hammond, Kai; Mies, Jan; Radacki, Krzysztof; Vargas, Alfredo (2012-06-15). "Ambient-Temperature Isolation of a Compound with a Boron-Boron Triple Bond". Science. 336 (6087): 1420–1422. Bibcode:2012Sci...336.1420B. doi:10.1126/science.1221138. PMID 22700924. S2CID 206540959.
2. Köppe, R.; Schnöckel, H. (2015-02-01). "The boron-boron triple bond? A thermodynamic and force field based interpretation of the N-heterocyclic carbene (NHC) stabilization procedure". Chemical Science. 6 (2): 1199–1205. doi:10.1039/c4sc02997f. ISSN 2041-6520. PMC 5811121. PMID 29560205.
3. Holzmann, Nicole; Hermann, Markus; Frenking, Gernot (2015-06-15). "The boron–boron triple bond in NHC→BB←NHC". Chemical Science. 6 (7): 4089–4094. doi:10.1039/C5SC01504A. ISSN 2041-6539. PMC 5707517. PMID 29218175.
4. Grunenberg, Jörg (2015-06-15). "III-defined concepts in chemistry: rigid force constants vs. compliance constants as bond strength descriptors for the triple bond in diboryne". Chemical Science. 6 (7): 4086–4088. doi:10.1039/C5SC01322D. ISSN 2041-6539. PMC 5707508. PMID 29218174.
5. Brandhorst, Kai; Grunenberg, Jörg (2008-07-22). "How strong is it? The interpretation of force and compliance constants as bond strength descriptors". Chemical Society Reviews. 37 (8): 1558–1567. doi:10.1039/B717781J. ISSN 1460-4744. PMID 18648681.
6. Shaik, Sason; Rzepa, Henry S.; Hoffmann, Roald (2013-03-04). "One Molecule, Two Atoms, Three Views, Four Bonds?". Angewandte Chemie International Edition. 52 (10): 3020–3033. doi:10.1002/anie.201208206. PMID 23362052.
7. Shaik, Sason; Danovich, David; Wu, Wei; Su, Peifeng; Rzepa, Henry S.; Hiberty, Philippe C. (March 2012). "Quadruple bonding in C2 and analogous eight-valence electron species". Nature Chemistry. 4 (3): 195–200. Bibcode:2012NatCh...4..195S. doi:10.1038/nchem.1263. ISSN 1755-4330. PMID 22354433.
8. "Grunenberg, Molecular Simulations, Braunschweig,Grunenberg, Molecular Simulations, Braunschweig". www.oc.tu-bs.de. Retrieved 2021-11-08.
9. Taylor, W.J.; Pitzer, K.S. (January 1947). "Vibrational frequencies of semirigid molecules: a general method and values for ethylbenzene". Journal of Research of the National Bureau of Standards. 38 (1): 1. doi:10.6028/jres.038.001. ISSN 0091-0635.
10. MAJUMDER, MOUMITA; MANOGARAN, SADASIVAM (January 2013). "Redundant internal coordinates, compliance constants and non-bonded interactions – some new insights". Journal of Chemical Sciences. 125 (1): 9–15. doi:10.1007/s12039-012-0357-7. ISSN 0974-3626. S2CID 93304185.
11. Brandhorst, Kai; Grunenberg, Jörg (2010-05-14). "Efficient computation of compliance matrices in redundant internal coordinates from Cartesian Hessians for nonstationary points". The Journal of Chemical Physics. 132 (18): 184101. Bibcode:2010JChPh.132r4101B. doi:10.1063/1.3413528. ISSN 0021-9606.
12. Decius, J. C. (1963-01-01). "Compliance Matrix and Molecular Vibrations". The Journal of Chemical Physics. 38 (1): 241–248. Bibcode:1963JChPh..38..241D. doi:10.1063/1.1733469. ISSN 0021-9606.
13. Wiberg, Kenneth B. (1986). "The Concept of Strain in Organic Chemistry". Angewandte Chemie International Edition in English (in German). 25 (4): 312–322. doi:10.1002/anie.198603121. ISSN 1521-3773.
14. Møller, Chr.; Plesset, M. S. (1934-10-01). "Note on an Approximation Treatment for Many-Electron Systems". Physical Review. 46 (7): 618–622. Bibcode:1934PhRv...46..618M. doi:10.1103/PhysRev.46.618.
15. Kendall, Rick A.; Dunning, Thom H.; Harrison, Robert J. (1992-05-01). "Electron affinities of the first-row atoms revisited. Systematic basis sets and wave functions". The Journal of Chemical Physics. 96 (9): 6796–6806. Bibcode:1992JChPh..96.6796K. doi:10.1063/1.462569. ISSN 0021-9606. S2CID 58930601.
16. Grunenberg, Jörg; Goldberg, Norman (2000-06-01). "How Strong Is the Gallium⋮Gallium Triple Bond? Theoretical Compliance Matrices as a Probe for Intrinsic Bond Strengths". Journal of the American Chemical Society. 122 (25): 6045–6047. doi:10.1021/ja994148y. ISSN 0002-7863.
17. Grunenberg, Jörg (2004-12-22). "Direct assessment of interresidue forces in Watson-Crick base pairs using theoretical compliance constants". Journal of the American Chemical Society. 126 (50): 16310–16311. doi:10.1021/ja046282a. ISSN 0002-7863. PMID 15600318.