XMODEM
File transfer protocol / From Wikipedia, the free encyclopedia
Dear Wikiwand AI, let's keep it short by simply answering these key questions:
Can you list the top facts and stats about XMODEM?
Summarize this article for a 10 year old
XMODEM is a simple file transfer protocol developed as a quick hack by Ward Christensen for use in his 1977 MODEM.ASM terminal program. It allowed users to transmit files between their computers when both sides used MODEM. Keith Petersen made a minor update to always turn on "quiet mode", and called the result XMODEM.[3]
![]() | This article includes a list of general references, but it lacks sufficient corresponding inline citations. (January 2009) |
Communication protocol | |
Purpose | file transfer protocol |
---|---|
Developer(s) | Ward Christensen[1][2] |
Introduction | 1977; 47 years ago (1977) |
Influenced | YMODEM, many others |
Hardware | modems |
XMODEM, like most file transfer protocols, breaks up the original data into a series of "packets" that are sent to the receiver, along with additional information allowing the receiver to determine whether that packet was correctly received. If an error is detected, the receiver requests that the packet be re-sent. A string of bad packets causes the transfer to abort.
XMODEM became extremely popular in the early bulletin board system (BBS) market, largely because it was simple to implement. It was also fairly inefficient, and as modem speeds increased, this problem led to the development of a number of modified versions of XMODEM to improve performance or address other problems with the protocol. Christensen believed his original XMODEM to be "the single most modified program in computing history".[4]
Chuck Forsberg collected a number of common modifications into his YMODEM protocol, but poor implementation led to a further fracturing before they were re-unified by his later ZMODEM protocol. ZMODEM became very popular, but never completely replaced XMODEM in the BBS market.