Loading AI tools
Chemical compound From Wikipedia, the free encyclopedia
Sulfuryl chloride is an inorganic compound with the formula SO2Cl2. At room temperature, it is a colorless liquid with a pungent odor. Sulfuryl chloride is not found in nature, as can be inferred from its rapid hydrolysis.
![]() | |
![]() | |
![]() | |
Names | |
---|---|
IUPAC name
Sulfuryl chloride | |
Other names
Sulfonyl chloride Sulfuric chloride Sulfur dichloride dioxide | |
Identifiers | |
3D model (JSmol) |
|
ChEBI | |
ChEMBL | |
ChemSpider | |
ECHA InfoCard | 100.029.314 |
EC Number |
|
2256 | |
PubChem CID |
|
RTECS number |
|
UNII | |
UN number | 1834 |
CompTox Dashboard (EPA) |
|
| |
| |
Properties | |
SO2Cl2 | |
Molar mass | 134.9698 g mol−1 |
Appearance | Colorless liquid with a pungent odor. Yellows upon standing. |
Density | 1.67 g cm−3 (20 °C) |
Melting point | −54.1 °C (−65.4 °F; 219.1 K) |
Boiling point | 69.4 °C (156.9 °F; 342.5 K) |
hydrolyzes | |
Solubility | miscible with benzene, toluene, chloroform, CCl4, glacial acetic acid |
Refractive index (nD) |
1.4437 (20 °C)[1] |
Hazards | |
GHS labelling: | |
![]() ![]() | |
Danger | |
H314, H335 | |
P260, P261, P264, P271, P280, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P321, P363, P403+P233, P405, P501 | |
NFPA 704 (fire diamond) | |
Flash point | Not flammable |
Related compounds | |
Related sulfuryl halides |
Sulfuryl fluoride |
Related compounds |
Thionyl chloride Chlorosulfonic acid Sulfuric acid |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
Sulfuryl chloride is commonly confused with thionyl chloride, SOCl2. The properties of these two sulfur oxychlorides are quite different: sulfuryl chloride is a source of chlorine whereas thionyl chloride is a source of chloride ions. An alternative IUPAC name is sulfuryl dichloride.
Sulfur is tetrahedral in SO2Cl2 and the oxidation state of the sulfur atom is +6, as in sulfuric acid.
SO2Cl2 is prepared by the reaction of sulfur dioxide and chlorine in the presence of a catalyst, such as activated carbon.[2]
The product can be purified by fractional distillation.
Sulfuryl chloride was first prepared in 1838 by the French chemist Henri Victor Regnault.[3]
Legacy routes include oxidation of thionyl chloride:
Sulfuryl chloride reacts with water, releasing hydrogen chloride gas and sulfuric acid:
For sulfuryl chloride, this happens at room temperature, but the related sulfuryl fluoride does not hydrolyse at temperatures up to 150 °C.
SO2Cl2 will also decompose when heated to or above 100 °C, about 30 °C above its boiling point.
Upon standing, SO2Cl2 decomposes to sulfur dioxide and chlorine, which gives the older samples a slightly yellowish color.[2]
SO2Cl2 can be used as a source of chlorine in alkane chlorination, initiated by chemicals (usually a peroxide) or light:[4]
Sulfuryl chloride is used as a source of Cl2. Because it is a pourable liquid, it is considered more convenient than Cl2 to dispense. It is used as a reagent in the conversion of C−H to C−Cl adjacent to activating substituents such as carbonyls and sulfoxides. It also chlorinates alkanes, alkenes, alkynes, aromatics, ethers (such as tetrahydrofuran) and epoxides. Such reactions occur under free radical conditions using an initiator such as AIBN. It can also be used to convert thiols or disulfides into their corresponding sulfenyl chlorides, though sulfinyl chlorides result from thiols in some cases.[5] SO2Cl2 can also convert alcohols to alkyl chlorides. In industry, sulfuryl chloride is most used in producing pesticides. Phosphorus pentachloride is prepared by the reaction of white phosphorus with sulfuryl chloride.
Sulfuryl chloride can also be used to treat wool to prevent shrinking.
Sulfuryl chloride is toxic, corrosive, and acts as a lachrymator. It releases hydrogen chloride upon contact with water, as well as donor solvents such as dimethyl sulfoxide and dimethylformamide.