Methodology of systematically removing waste From Wikipedia, the free encyclopedia
"L6s" redirects here. For the guitar, see Gibson L6-S.
Lean Six Sigma is a process improvement approach that uses a collaborative team effort to improve performance by systematically removing operational waste[1] and reducing process variation. It combines Lean Management and Six Sigma to increase the velocity of value creation in business processes.
This article needs additional citations for verification. (December 2021)
1980s–2000s
Lean Six Sigma's predecessor, Six Sigma, originated from the Motorola company in the United States in 1986.[2] Six Sigma was developed within Motorola to compete with the kaizen (or lean manufacturing) business model in Japan.[citation needed]
In the 1990s, Allied Signal hired Larry Bossidy and introduced Six Sigma in heavy manufacturing. A few years later, General Electric's Jack Welch consulted Bossidy and implemented Six Sigma at the conglomerate.
During the 2000s, Lean Six Sigma forked from Six Sigma and became its own unique process. While Lean Six Sigma developed as a specific process of Six Sigma, it also incorporates ideas from lean manufacturing, which was developed as a part of the Toyota Production System in the 1950s.
2000s–2010s
The first concept of Lean Six Sigma was created in Chuck Mills, Barbara Wheat, and Mike Carnell's 2001 book, Leaning into Six Sigma: The Path to Integration of Lean Enterprise and Six Sigma.[3] It was developed as a guide for managers of manufacturing plants on how to combine lean manufacturing and Six Sigma to improve quality and cycle time in the plant.[4]
Lean Six Sigma is a synergized managerial concept of Lean and Six Sigma.[5] Lean traditionally focuses on eliminating the eight kinds of waste ("muda"), and Six Sigma focuses on improving process output quality by identifying and removing the causes of defects (errors) and minimizing variability in (manufacturing and business) processes.
Lean Six Sigma uses the Define, Measure, Analyze, Improve and Control (DMAIC) phases similar to that of Six Sigma. The five phases used in Lean Six Sigma aim to identify the root cause of inefficiencies and work with any process, product, or service that has a large amount of data or measurable characteristics available.
The different levels of certifications are divided into belt colors. The highest level of certification is a black belt, signifying a deep knowledge of Lean Six Sigma principles. Below the black belt are the green and yellow belts. For each of these belts, level skill sets are available that describe which of the overall Lean Six Sigma tools are expected to be part of a certain belt level.[6] The skill sets reflect elements from Six Sigma, Lean and other process improvement methods like the theory of constraints and total productive maintenance. In order to achieve any of the certification levels, a proctored exam must be passed that asks questions about Lean Six Sigma and its applications.
Lean Six Sigma organization structure
Waste (muda) is defined by Fujio Cho as "anything other than the minimum amount of equipment, materials, parts, space, and workers time, which are absolutely essential to add value to the product".[7]
Different types of waste have been defined in the form of a mnemonic of "downtime":
Defects: A defect is a product that is declared unfit for use, which requires the product to be either scrapped or reworked, costing the company time and money. Examples include a product that is scratched during the production process and incorrect assembly of a product due to unclear instructions.
Over-production: Over-production refers to products made in excess or before it is needed. Examples include creating unnecessary reports and overproduction of a product before a customer has requested it.
Waiting: Waiting involves delays in process steps and is split into two different categories: waiting for material and equipment and idle equipment. Examples include waiting for authorization from a superior, waiting for an email response, waiting for material delivery, and slow or faulty equipment.
Non-Used Talent: Non-Used Talent refers to the waste of human potential and skill. The main cause is when management is segregated from employees; when this occurs, employees are not given the opportunity to provide feedback and recommendations to managers in order to improve the process flow and production suffers. Examples include poorly trained employees, lack of incentives for employees, and placing employees in jobs or positions that do not use all of their knowledge or skill.
Transportation: Transportation is the unnecessary or excessive movement of materials, products, people, equipment, and tools. Transportation adds no value to the product and can lead to product damage and defects. Examples include moving products between different functional areas and sending overstocked inventory back to an outlet warehouse.
Inventory: Inventory refers to an excess in products and materials that are unprocessed. It is a problem because the product may become obsolete before the customer requires it, storing the inventory costs the company time and money, and the possibility of damage and defects increases over time. Examples include excess finished goods, finished goods that cannot be sold, and broken machines on the manufacturing floor.
Motion: Motion is unnecessary movement by people.[8] Excessive motion wastes time and increases the chance of injury. Examples include walking to get tools, reaching for materials, and walking to different parts of the manufacturing floor to complete different tasks.
Extra-processing: Extra-processing is doing more work than required or necessary to complete a task. Examples include double-entering data, unnecessary steps in production, unnecessary product customization, and using higher precision equipment than necessary.[9]
Wheat, Barbara; Partners, Publishing (2001). Leaning into Six Sigma: The Path to Integration of Lean Enterprise and Six Sigma. Boulder City, Colorado. ISBN978-0971249103.{{cite book}}: CS1 maint: location missing publisher (link)
Carnell, Mike; Mills, Chuck; Wheat, Barbara (April 2003). Leaning Into Six Sigma: A Parable of the Journey to Six Sigma and a Lean Enterprise. McGraw-Hill Education. ISBN0071414320.
Kowansky, Elaine; Friberg, Norm (2006). How NOT To Implement Six Sigma: A manager's guide to ensuring the failure of the world's greatest Quality Improvement and Waste Reducing Machine. Xilbris. ISBN978-1425712266.
Bass, Issa; Lawton, Barbara (2009). Lean Six Sigma Using SigmaXL and Minitab. McGraw-Hill Education. ISBN978-0071621304.
Pyzdek, Thomas; Keller, Paul (2014). The Six Sigma Handbook, Fourth Edition (4thed.). McGraw-Hill Education (published May 13, 2014). ISBN978-0071840538.
Morgan, John; Brenig-Jones, Martin (2015). Lean Six Sigma for Dummies, Third Revised Edition (3rded.). John Wiley & Sons (published Nov 6, 2015). ISBN978-1119067351.
Summers, Donna C.S (2011). Lean Six Sigma: Process Improvement Tools and Techniques. One Lake St, Upper Saddle River, New Jersey: Prentice Hall. ISBN978-0-13-512510-6.