![cover image](https://wikiwandv2-19431.kxcdn.com/_next/image?url=https://upload.wikimedia.org/wikipedia/commons/thumb/e/e4/Inlay_onlay_overlay.jpg/640px-Inlay_onlay_overlay.jpg&w=640&q=50)
Inlays and onlays
Restoration procedure in dentistry / From Wikipedia, the free encyclopedia
Dear Wikiwand AI, let's keep it short by simply answering these key questions:
Can you list the top facts and stats about Inlays and onlays?
Summarize this article for a 10 year old
In dentistry, inlays and onlays are used to fill cavities,[1] and then cemented in place in the tooth. This is an alternative to a direct restoration, made out of composite, amalgam or glass ionomer, that is built up within the mouth.
![Thumb image](http://upload.wikimedia.org/wikipedia/commons/thumb/e/e4/Inlay_onlay_overlay.jpg/640px-Inlay_onlay_overlay.jpg)
Inlays and onlays are used in molars or premolars, when the tooth has experienced too much damage to support a basic filling, but not so much damage that a crown is necessary. The key comparison between them is the amount and part of the tooth that they cover. An inlay will incorporate the pits and fissures of a tooth, mainly encompassing the chewing surface between the cusps. An onlay will involve one or more cusps being covered. If all cusps and the entire surface of the tooth is covered this is then known as a crown.[1]
Historically inlays and onlays will have been made from gold and this material is still commonly used today. Alternative materials such as porcelain were first described being used for inlays back in 1857.[2] Due to its tooth like colour, porcelain provides better aesthetic value for the patient. In more recent years, inlays and onlays have increasingly been made out of ceramic materials. In 1985, the first ceramic inlay created by a chair-side CAD-CAM device was used for a patient.[2] More recently, in 2000, the CEREC 3 was introduced. This allows for inlays and onlays to be created and fitted all within one appointment.[2] Furthermore, no impression taking is needed due to the 3D scanning capabilities of the machine.