Loading AI tools
From Wikipedia, the free encyclopedia
GroundBIRD is an experiment to observe the cosmic microwave background at 145 and 220GHz. It aims to observe the B-mode polarisation signal from inflation in the early universe. It is located at Teide Observatory, on the island of Tenerife in the Canary Islands.
![]() | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)
|
![]() GroundBIRD in 2019 | |
Part of | Teide Observatory ![]() |
---|---|
Location(s) | Tenerife, Atlantic Ocean, international waters |
Coordinates | 28°18′02″N 16°30′37″W |
Altitude | 2,400 m (7,900 ft) |
Wavelength | 145, 220 GHz (2.07, 1.36 mm) |
Telescope style | cosmic microwave background experiment radio telescope ![]() |
Diameter | 30 cm (1 ft 0 in) |
Angular resolution | 0.5 degree, 0.3 degree ![]() |
![]() | |
The telescope was constructed to measure the B-mode signal in the polarisation of the Cosmic Microwave Background (CMB),[1] in order to look for evidence of cosmic inflation in the early universe. It aims to observe the reionization bump at and the recombination peak around .[2] The name 'GroundBIRD' indicates that the telescope is ground-based, while BIRD stands for B-mode Imaging Radiation Detector.[2] It is related to the future, similarly-named, LiteBIRD CMB satellite.
The telescope consists of two mirrors in a Mizuguchi-Dragone configuration, with a diameter of 30 cm (12 in). The telescope is inside the cryostat, which is mounted on a rotation table, with a rotary joint that provides helium gas and electricity to the cryostat.[2][3] The mirrors are cooled to 4 K (−269.15 °C) using a Pulse tube refrigerator to reduce the thermal noise from the mirror surfaces.[2]
The experiment uses microwave kinetic inductance detectors (MKIDs),[4] which are cooled to 250mK by a sorption cooler within the cryostat, which uses helium-3, and was manufactured by Chase Research Cryogenics Ltd.[2] The signals from the detector are multiplexed, and around 100 detectors can be measured in both phase and amplitude with a single digital read-out system with a bandwidth of 200MHz, recording 1,000 samples per second. The digital system uses 12-bit ADCs and a Kintex-7 FPGA from Xilinx initially,[4] and now uses Kintex ultrascale FPGAs.[citation needed] Raspberry Pis are used to monitor and control the telescope.[5]
The cryostat rotates at 20 rpm (120° per second, 1 rotation every 3 seconds) to minimize 1/f noise.[2][6][7] It observes at zenith angles up to 20°, mapping around 40% of the sky. The field of view is 10°, with an angular resolution of 0.5° FWHM at 145GHz, and 0.3° at 220GHz.[2] It will measure the CMB at [6]
The telescope was constructed at KEK in Japan.[2] Test observations started in Japan in 2014. While it was originally intended that it would observe from the Atacama Desert in Chile,[6] an agreement to install it at Teide Observatory was reached in 2016,[8][1][9] at an altitude of 2,400 metres (7,900 ft).[2][10] It was shipped to Tenerife in January 2019.[7] In February 2020, the experiment was visited by Kenji Hiramatsu, the Japanese Ambassador to Spain.[11]
The collaboration includes scientists from:
The project is funded by:
with additional support from:
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.