DCI-P3
RGB color space for digital movie projection from the American film industry From Wikipedia, the free encyclopedia
RGB color space for digital movie projection from the American film industry From Wikipedia, the free encyclopedia
DCI-P3 is a color space defined in 2005 as part of the Digital Cinema Initiative, for use in theatrical digital motion picture distribution[1] (DCDM[2]). Display P3 is a variant developed by Apple Inc. for wide-gamut displays.
| |
The CIE 1931 chromaticity diagram showing the P3 gamut, and the gamuts of some other common RGB color spaces. The corners of the green triangle are the primary colors of the P3 color space. The white points shown here are Illuminant D65 which is used for Display P3, and CCT 6300 K which is used with DCI-P3. | |
| Abbreviation | P3 |
|---|---|
| Status | Published |
| Organization | |
| Authors | DCI |
| Base standards | RGB |
| Related standards | sRGB, BT.2020, DCDM |
| Domain | Color space, color model |
In 2005, Digital Cinema Initiatives, LLC in Hollywood, California released the Digital Cinema System Specification version 1.0,[3] which defined the colorimetry of what would become known as the DCI-P3 color space.
According to section 8.3.4 in the specification, the blue primary color is the same as Rec. 709, sRGB, and Adobe RGB, with a dominant wavelength of 464.2 nm. The red primary is a deeper red than sRGB and Adobe RGB, as it emits a longer dominant wavelength at 614.9 nm. The red primary is also farther from the white point (in terms of CIE spaces such as Lshuv) implying it is more saturated than the red-orange primary of sRGB.
The most significant difference is the green primary, which is much closer to the spectral locus than either sRGB or Adobe RGB. DCI-P3's green primary has a dominant wavelength of 544.2 nm. Adobe RGB's green primary is more blueish with a dominant wavelength of 534.7 nm. sRGB's green primary is more yellowish at 549.1 nm.
DCI-P3 covers 53.6%[4] of the CIE 1931 chromaticity diagram (see inset image), which describes the color gamut of daylight human vision (Photopic vision) as determined experimentally in the 1920s. In that study, participants visually matched a mixture of red, green, and blue "primary" lights to specific, pure monochromatic colored lights. This defined the spectral locus, which is the outer rim of the diagram, and the maximum extent of human color vision.
A smaller, practical gamut for comparison is the Pointer's gamut, which consists of diffusely reflecting surface colors. DCI-P3 covers 86.9% of Pointer's gamut,[5] while in comparison, Rec. 709/sRGB only covers 69.4%.
While DCI-P3 was developed by the Digital Cinema Initiatives (DCI) organization, many of the relevant technical standards are published by the Society of Motion Picture and Television Engineers (SMPTE) such as SMPTE EG 432-1 and SMPTE RP 431-2.[6] On November 10, 2010, SMPTE published SMPTE EG 432-1:2010, which includes a variant of the color space using a D65 white point (about 6503.51 K) instead of the ~6300 K white point of DCI-P3.[7] On April 6, 2011, SMPTE published SMPTE RP 431-2:2011 which defines the reference viewing environment.[8]
DCI-P3 colors are supported in CSS level 4[9] on Safari since 2017 (version 10.1) and Google Chrome since March 2023 (version 111) browsers.[10]
Initially, DCI-P3 was available with theatrical xenon-arc projection systems. This emerging technology presented challenges for filmmakers working with digital media on desktop workstations—that is, how to accurately view the colorspace of the theatrical viewing environment during the production and post production process.
| Color space | TRC | White point | CCT | Primary colors | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| x | y | K | Rx | Ry | Gx | Gy | Bx | By | ||
| DCI-P3 (Theatrical) | γ 2.6 | 0.314 | 0.351 | ~6300 | 0.680 | 0.320 | 0.265 | 0.690 | 0.150 | 0.060 |
| DCI-P3 "D60 sim" | 0.32168 | 0.33767 | ~6000 | |||||||
| Display P3 (D65) | sRGB | 0.3127 | 0.3290 | 6504 | ||||||
| P3-D65 (HDR) | PQ | |||||||||
| Canon DCI-P3+ | User | 0.314 | 0.351 | ~6300 | 0.740 | 0.270 | 0.220 | 0.780 | 0.090 | -0.090 |
Created by the Digital Cinema Initiative, DCI-P3 is designed for viewing in a fully darkened theater environment. The projection system uses a simple 2.6 gamma curve, the nominal white luminance is 48 cd/m2 (14ftL), and the white point is based on a projector with a xenon bulb, for a correlated color temperature (CCT) of ~6300 K. It is incorrect to refer to this as "D63" as this white point is not a CIE standard illuminant, and is not on the Planckian locus. Instead, the white point is slightly greener. This resulted from optimizing for best light output with the xenon arc lamp projectors commonly used in theaters.[7]
When mastering content utilizing a display or projector in P3 color space, users have the option of using an output transform to DCI-P3 D60-sim which matches the nominal white point of the ACES color spaces.
Apple Inc developed displays using the P3 primaries, and the corresponding Display P3 color space.[17][18]While it uses standard P3 RGB primaries, the white point is D65 instead of the DCI ~6300 K white point. The D65 white point is the existing standard for common sRGB and devices (Adobe RGB also uses D65). Display P3 uses the sRGB transfer curve, which is approximately equivalent to a gamma of 2.2.[19] Display P3's gamut is approximately 50% larger than sRGB in volume and 25% in surface.[20]
Since iPhone 7, the built in camera creates images tagged with the Display P3 ICC profile.
Some Netflix HDR deliverables use P3-D65 in conjunction with the PQ transfer curve. [21][22]
Canon created an expanded gamut color space they call DCI-P3+ using the same ~6300 K white point as DCI-P3. Otherwise, P3+ has no relation to DCI-P3 nor the Digital Cinema Initiative. Unlike the DCI-P3 color space, which defines an actual display technology, Canon's DCI-P3+ color space uses imaginary primaries which cannot be realized by any physical display technology.[23]
Because the P3 gamut is larger than sRGB, designs created for P3, but presented on an sRGB display without the use of color management, tend to appear duller or less saturated.[24] Apple suggests creating a separate set of image or color elements for each color space, sRGB and Display-P3, adding to complexity.
Because the P3 red primary emits a longer wavelength (i.e. a deeper red) than sRGB, individuals with some forms of color vision deficiency (aka colorblind) will see colors involving red as even darker than on sRGB. The creates an accessibility issue for instance for red, purple, or orange text against black.
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.
