Colour state

Colour states is a system used for quickly showing meteorological conditions.^[1][2]

Meteorological colour states are determined by the relevant worst condition from the visibility and significant cloud height. In the US and parts of Europe the lowest significant cloud layer is five or more oktas; in the United Kingdom, Belgium, France and the Netherlands it is three oktas or more.^[3] If visibility or cloud height measurements fall on a boundary (e.g. 5000 m visibility or 1500 ft cloud height) the colour state assumes the higher value in this case WHT.^{[citation needed]}

If an airfield runway is unusable for reasons other than clouds or low visibility (e.g. ice or other obstructions) then the word BLACK is written in full and placed immediately before the actual colour state (e.g. BLACKWHT).^[4]

The colour state may be appended to a METAR report. A short period forecast called a TREND which covers the following two hours from the observation may also be added, often with reference to the colour state.^{[citation needed]}

Criteria

The following criteria are used to determine the colour state:^[5]

Colour state	BLU	WHT	GRN	YLO1	YLO2	AMB	RED
Cloud height in feet	2500	1500	700	500	300	200	<200
Visibility in metres	8000	5000	3700	2500	1600	800	<800

See also

• Colour code

References

1. "Aerodrome Colour States" (PDF). CAA.co.uk. 2010-12-24. p. 10. Archived from the original (PDF) on 2012-09-10.
2. "SafetySense :eaflet 26" (PDF). CAA.co.uk. 2010-12-24. Archived from the original (PDF) on 2012-09-10.
3. "Aircrew Quick Reference to the METAR and TAF Codes" (PDF). Department of the Air Force. 2010-12-24. Archived from the original (PDF) on 2011-07-08.
4. "Military color code". AirlineDispatch.com. 2010-12-24. Archived from the original on 2010-06-13.
5. "METAR Decoder". SkyStef.be. 2010-12-24.