Centrifugal fan
Mechanical fan that forces fluid to move radially outward / From Wikipedia, the free encyclopedia
Dear Wikiwand AI, let's keep it short by simply answering these key questions:
Can you list the top facts and stats about Centrifugal fan?
Summarize this article for a 10 year old
A centrifugal fan is a mechanical device for moving air or other gases in a direction at an angle to the incoming fluid. Centrifugal fans often contain a ducted housing to direct outgoing air in a specific direction or across a heat sink; such a fan is also called a blower, blower fan, or squirrel-cage fan (because it looks like a hamster wheel). Tiny ones used in computers are sometimes called biscuit blowers. These fans move air from the rotating inlet of the fan to an outlet. They are typically used in ducted applications to either draw air through ductwork/heat exchanger, or push air through similar impellers.[1] Compared to standard axial fans, they can provide similar air movement from a smaller fan package, and overcome higher resistance in air streams.
This article needs additional citations for verification. (July 2011) |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/7a/Centrifugal_fan.gif/320px-Centrifugal_fan.gif)
Centrifugal fans use the kinetic energy of the impellers to move the air stream, which in turn moves against the resistance caused by ducts, dampers and other components. Centrifugal fans displace air radially, changing the direction (typically by 90°) of the airflow. They are sturdy, quiet, reliable, and capable of operating over a wide range of conditions.[2]
Centrifugal fans are, like axial fans, constant-volume devices, meaning that, at a constant fan speed, a centrifugal fan moves a relatively constant volume of air rather than a constant mass. This means that the air velocity in a system is fixed, but the actual mass of air flowing will vary based on the density of the air. Variations in density can be caused by changes in incoming air temperature and elevation above sea level, making these fans unsuitable for applications where a constant mass of air is required to be provided.[3]
Centrifugal fans are not positive-displacement devices and centrifugal fans have certain advantages and disadvantages when contrasted with positive-displacement blowers: centrifugal fans are more efficient, whereas positive-displacement blowers may have a lower capital cost, and are capable of achieving much higher compression ratios.[4][5][6][7][8] Centrifugal fans are usually compared to axial fans for residential, industrial, and commercial applications. Axial fans typically operate at higher volumes, operate at lower static pressures, and have higher efficiency.[9] Therefore axial fans are usually used for high volume air movement, such as warehouse exhaust or room circulation, while centrifugal fans are used to move air in ducted applications such as a house or typical office environment.
The centrifugal fan has a drum shape composed of a number of fan blades mounted around a hub. As shown in the animated figure, the hub turns on a driveshaft mounted in bearings in the fan housing. The gas enters from the side of the fan wheel, turns 90 degrees and accelerates due to centrifugal force as it flows over the fan blades and exits the fan housing.[10]