Bound state in the continuum

Special state of wave and quantum systems in physics From Wikipedia, the free encyclopedia

Bound state in the continuum

A bound state in the continuum (BIC) is an eigenstate of some particular quantum system with the following properties:

  1. Energy lies in the continuous spectrum of propagating modes of the surrounding space;
  2. The state does not interact with any of the states of the continuum (it cannot emit and cannot be excited by any wave that came from the infinity);
  3. Energy is real and Q factor is infinite, if there is no absorption in the system.
Thumb
Schematic picture of energy levels and examples of different states. Discrete spectrum states[nb 1] (green), resonant states (blue dotted line) [1] and bound states in the continuum (red). Partially reproduced from [2] and [3]

BICs are observed in electronic, photonic, acoustic systems, and are a general phenomenon exhibited by systems in which wave physics applies.[2]

Bound states in the forbidden zone, where there are no finite solutions at infinity, are widely known (atoms, quantum dots, defects in semiconductors). For solutions in a continuum that are associated with this continuum, resonant states[1] are known, which decay (lose energy) over time. They can be excited, for example, by an incident wave with the same energy. The bound states in the continuum have real energy eigenvalues and therefore do not interact with the states of the continuous spectrum and cannot decay.[2]

Classification of BICs by mechanism of occurrence

Summarize
Perspective

Source:[2]

BICs arising when solving the inverse problem

Wigner-von Neumann's BIC (Potential engineering)

The wave function of one of the continuum states is modified to be normalizable and the corresponding potential is selected for it.

More information two types of spherically symmetric potentials are considered, with the potential of ...
Examples

In the work of von Neumann and Wigner [4] two types of spherically symmetric potentials are considered, with the potential of localization occurs due to the "reflection" from infinity (since the material point goes to infinity for a finite time, rolling down from this potential, and the probability of being there tends to zero). A similar example in 1D considers the exponential dependence of the potential.[5] The second type of potential[6][7] has a complex shape, but is periodically modulated with period . A wave function with period is reflected from such a potential to the center in analogy to the reflection from a Bragg mirror. In the one-dimensional case, such potentials can be realized using superlattices.[8][9]

Close

Hopping rate engineering

In the tight binding approximation, the jump rates are modified so that the state becomes localized

More information ...
Examples

BICs of this type have been realized in an array of coupled optical waveguides,[10] with the hopping rate modulated by the spacing between the waveguides. Experimentally, a state with following rates

was realized in the system which consist of 40 waveguides. There are also examples of BICs in PT-symmetric systems.[11][12]

Close

Boundary shape engineering

Sources for BICs of different types, e.g. Fabry-Perot type are replaced by scatterers so as to create BIC of the same type.

More information Examples ...
Examples

BICs of this type are observed for water waves.[13][14][15][16]

Close

BICs arising due to parameter tuning

Fabry-Perot BICs

For resonant structures, the reflection coefficient near resonance can reach unity. Two such structures can be arranged in such a way that they radiate in antiphase and compensate each other.

More information Examples ...
Examples

In addition to the waves on water mentioned above, states of this type are found in many systems, such as those of pairs of quantum dots coupled to a waveguide,[17][18] double chains of copper atoms,[19] waveguide pairs of Z- and П- shapes [20] In photonics, states are realized, for example, in pairs of two-dimensional photonic crystal slabs,[21] double arrays of dielectric cylinders[22] etc.[23]

Close

Friedrich-Wintgen BICs

Two modes of the same symmetry of one and the same structure approach each other when the parameters of the structure are changed, and at some point an anti-crossing occurs. In this case, BIC is formed on one of the branches, since the modes as if compensate each other, being in antiphase and radiating into the same radiation channel.[24][25]

More information Examples ...
Examples

Friedrich-Wintgen BICs (FW BICs) were considered for a hydrogen atom in a magnetic field[26] and experimentally manifested in inhibition of autoionization of barium atom,[27] topological insulators with a defect [28] and many other quantum systems.[29][30] Also, this type of BIC is found in two-dimensional and three-dimensional cylindrical open acoustic resonators.[31][32] In photonics, accidental BICs in periodic structures can sometimes appear as FW BICs,[33][34] also modes of this type appeared in Bragg waveguide at interaction of TE and TM waves through anisotropic medium.[35] A notable example is the theoretical realization of BIC on a layered spherical nanoparticle of specifically selected materials,[36][37] in this case BICs appear due to the interaction of different dipole modes of the same particle. By the same mechanism high-Q states can be realized in nonspherical dielectric resonators as well,[38][39] but in this case each mode consist of an infinite number of multipoles,[40] and the Q-factor doesn't go to infinity.

Close

Single-resonance parametric BICs

Occur when a single mode can be represented as a sum of contributions,[41] each of which varies with the structure parameters. At some point, destructive interference of all contributions occurs.

More information and are also accidental BICs. They can appear in planar structures in ...
Examples

BICs of this type are usually considered in photonic crystals[42] and are also accidental BICs. They can appear in planar structures in -plane, which possess and symmetries,[43] but their existence is not guaranteed by symmetry, they appear for particular values of structure parameters. In addition to photonic periodic structures,[44][45] BICs of this type can appear for water waves,[46] quantum waveguides,[47] mechanical resonators,[48] as a surface waves[49] etc.

Close

Symmetry-protected BICs

Arise when the symmetry of the eigenstate differs from any of the possible symmetries of propagating modes in the continuum.

More information In the simple case, states of this type are observed in the Г-point of planar photonic crystals possessing symmetry ...
Examples

In the simple case, states of this type are observed in the Г-point of planar photonic crystals possessing symmetry .[50][51][52] Often, other types of BICs exist in the same structures. Also symmetry-protected BICs have been observed in coupled waveguide systems.[53][54]

Close

Separable BICs

Arise when the eigenvalue problem is solved by the Separation of Variables Method, and the wave function is represented, for example, as , where both multipliers correspond to localized states, with the total energy lying in the continuum.

More information Examples ...
Examples

The Hamiltonian for obtaining this type of BIC was first proposed by Robnik[55] and then studied in various quantum systems[56][57] and 2D photonic structures.[58][59]

Close

Wigner-Von Neumann BICs

Summarize
Perspective

Bound states in the continuum were first predicted in 1929 by Eugene Wigner and John von Neumann.[4] Two potentials were described, in which BICs appear for two different reasons.

In this work, a spherically symmetric wave function is first chosen so as to be quadratically integrable over the entire space. Then a potential is chosen such that this wave function corresponds to zero energy.

The potential is spherically symmetric, then the wave equation will be written as follows:

the angle derivatives disappear, since we limit ourselves to considering only spherically symmetric wave functions:

For to be the eigenvalue for the spherically symmetric wave function , the potential must be

.

We obtain the specific values and for which the BIC will be observed.

First case

Thumb
Potential and wave function corresponding to zero energy, for the first case of the Wigner-Von Neumann BIC

Let us consider the function . While the integral must be finite, then considering the behavior when , we get that , then considering the behavior when , we get . The regularity in requires . Finally, we get .

Assuming , then the potential will be equal to (discarding the irrelevant multiplier ):

The eigenfunction and the potential curve are shown in the figure. It seems that the electron will simply roll off the potential and the energy will belong to the solid spectrum, but there is a stationary orbit with .

In the work [4] is given the following interpretation: this behavior can be understood from an analogy with classical mechanics (considerations belong to Leo Szilard). The motion of a material point in the potential is described by the following equation:

It's easy to see that when , , so the asymptotic is

that is, for a finite time the point goes to infinity. The stationary solution means that the point returns from infinity again, that it is as if it is reflected from there and starts oscillating. The fact that at tends to zero follows from the fact that it rolls down a large potential slide and has an enormous speed and therefore a short lifetime. And since the whole oscillatory process (from to infinity and back) is periodic, it is logical that this quantum mechanical problem has a stationary solution.

Second case

Thumb
(a) Potential and wave function (on an arbitrary scale along the vertical axis) corresponding to zero energy, for the second case of the Wigner von Neumann SSC, (b) .

Let's move on to the second example, which can no longer be interpreted from such considerations.

First of all, we take a function , then . These are divergent spherical waves, since the energy is greater than the potential , the classical kinetic energy remains positive. The wave function belongs to a continuous spectrum, the integral diverges. Let's try to change the wave function so that the quadratic integral converges and the potential varies near -1.

Consider the following ansatz:

If the function is continuous, and at the asymptotic is then the integral is finite. The potential would then be equal (with the corrected arithmetical error in the original article):[7]

In order for the potential to remain near -1, and at tend to -1, we must make the functions small and at tend to zero.

In the first case, also should vanish for , namely for , that is for . This is the case when or any other function of this expression.

Let assume , where is arbitrary (here tends to when ). Then

The expression for the potential is cumbersome, but the graphs show that for the potential tends to -1. Furthermore, it turns out that for any one can choose such an A that the potential is between and . We can see that the potential oscillates with period and the wave function oscillates with period . It turns out that all reflected waves from the "humps" of such a potential are in phase, and the function is localized in the center, being reflected from the potential by a mechanism similar to the reflection from a Bragg mirror.

Notes

Literature

Wikiwand - on

Seamless Wikipedia browsing. On steroids.