Remove ads
Disused railway station in Bathampton, Somerset From Wikipedia, the free encyclopedia
Bathampton railway station is a former railway station in Bath, England, serving the community of Bathampton. The station opened on 2 February 1857 and closed on 3 October 1966.[1] Very little remains, as the station site was replaced with improved trackwork for a nearby junction. The only significant remains are the gateposts at the head of the approach road.[2]
Bathampton | |
---|---|
General information | |
Location | Bathampton, District of Bath and North East Somerset England |
Coordinates | 51.3983°N 2.3208°W |
Grid reference | ST777666 |
Platforms | 2 |
Other information | |
Status | Disused |
History | |
Original company | Great Western Railway |
Pre-grouping | Great Western Railway |
Post-grouping | Great Western Railway |
Key dates | |
2 February 1857 | Opened |
10 June 1963 | Closed to goods |
3 October 1966 | Closed |
The main line of the Great Western Railway (GWR) opened in stages, and was completed on 30 June 1841 with the opening of the stretch between Chippenham and Bath; there were initially two intermediate stations, at Corsham and at Box.[3] The Wilts, Somerset and Weymouth Railway (WS&WR) opened between Thingley Junction (west of Chippenham) and Westbury on 5 September 1848; it was absorbed by the GWR on 14 March 1850.[4] The Act of Parliament authorising the WS&WR had stipulated that it should also build a branch line connecting its main line to Bath, in order to communicate with Bristol, but owing to difficulty in obtaining finance, this was not proceeded with.[5] A lawsuit was successfully brought against the GWR in 1853, and on 31 July 1854, the GWR obtained a fresh Act of Parliament granting an extension of time for the completion of the branch, and this was opened on 2 February 1857 from Bradford Junction, a triangular junction at Trowbridge on the former WS&WR line, to a new station at Bathampton on the GWR main line.[6] It had been planned that this station would be the interchange point for trains on the branch to Bradford-on-Avon, but once the Bradford-on-Avon service commenced, it normally ran through to Bath. Bathampton station was mainly used by the people who lived in eastern Bath.[7]
The station had two platforms, used by both main line and branch trains; the junction of the two routes was at the eastern end of the station.[7] The main and branch lines had been built to the broad gauge; during June 1874, the main line from the junction to the west was altered to mixed gauge, and the Bradford-on-Avon branch was converted to standard gauge;[8] the main line from the junction to the east was altered to mixed gauge in March 1875;[9] and the main line was altered from mixed gauge to standard gauge in May 1892.[10] The main line was always double track, but the branch, which had been built as single-track, was doubled in May 1885. The station had several sidings, some of which served a timber works. There were two signal boxes, Bathampton and Bathampton West, which were replaced by a single signal box on 21 September 1956.[7]
The reopening of Bathampton station was initially proposed as part of the MetroWest project for local rail services in the West of England. A study into its reopening was undertaken in 2015,[11] which concluded a cost of between £3 million and £11 million.
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.