File:Steam_locomotive_work_(cropped).gif
维基百科,自由的 encyclopedia
Steam_locomotive_work_(cropped).gif (393 × 178像素,文件大小:77 KB,MIME类型:image/gif、循环、8帧、0.8秒)
摘要
描述Steam locomotive work (cropped).gif |
English: Steam locomotive wheels, valve & engine animation.
Walschaerts valve gear (mechanism for moving the valve in a steam engine). Item 2 is a crank outside of the main crankpin. Its "timing" is a quarter turn away from the power crankpin. This provides the main force to move the valve. Item 1 is pivoted (little dot, just below the callout arrow) to the frame (light gray) in the middle, so it rocks back and forth. It has a groove (inside; not shown) along its length, which carries a sliding block, pivoted on the left end of link 3. The engineer moves pushrod 8 left and right to move link 3 up and down. If the link is below center, the engine moves backwards. If the link is near to the center, steam is conserved for ordinary running when up to speed. The short link below the numeral 3 (not the arrow) that seems to point up into the air "from the wheel edge" is pivoted on the frame (not shown) at its upper end. It supports the rest of the links below it. The right end of link 3, therefore, doesn't move up and down much; its sidewise motion operates the valve. Item 4 is the crosshead, the sliding piece that guides the piston rod. (Callout 4 also points to a link that improves valve timing.) Note the typically-European piston rod -- it's very long, and unlike American (and some other) designs, it extends out front (to the right). The other types of locos. don't have any piston rod to the right side of the piston. Item 5 is the pivot where the main connecting rod (long groove. shown, to make it lighter) connects to the crosshead. Item 6 is the cylinder and valve block. Pinkish color is steam from the boiler. Exhaust is white. The valve is a pair of black vertical stripes, connected together. (It's shaped something like a spool.) As shown (without animation), steam is going into the right side of the cylinder (Item 7), pushing the piston to the left. The piston rod pushes the crosshead, which pushes the main connecting rod. (The piston is in the middle of the cylinder. Unlike pistons in internal-combustion engines, steam pistons are discs.)Deutsch: Heusinger- oder Walschaert-Steuerung
Legende:
|
||||||||
来源 | Drawn by Panther using Corel Draw & Adobe Image Ready. The idea was taken from the book about 1-3-1 «Russian Prairie» «C» series locomotives by A.S. Nikolskiy, Moscow, 1997 (1-3-1 is in Russian notation, calculated by wheel pairs) | ||||||||
作者 | Panther | ||||||||
授权 (二次使用本文件) |
我,本作品著作权人,特此采用以下许可协议发表本作品:
![]() ![]() ![]()
您可以选择您需要的许可协议。 |
||||||||
其他版本 |
|
Awards
说明
此文件中描述的项目
描绘内容
GNU自由文档许可证1.2或更高版本 简体中文(已转写)
知识共享署名-相同方式共享1.0通用 简体中文(已转写)
知识共享署名-相同方式共享2.0通用 简体中文(已转写)
知识共享署名-相同方式共享2.5通用 简体中文(已转写)
知识共享署名-相同方式共享3.0未本地化版本 简体中文(已转写)
媒体类型 简体中文(已转写)
image/gif
文件历史
点击某个日期/时间查看对应时刻的文件。
日期/时间 | 缩略图 | 大小 | 用户 | 备注 | |
---|---|---|---|---|---|
当前 | 2024年6月28日 (五) 01:31 | ![]() | 393 × 178(77 KB) | Mr. Ibrahem | File:Steam locomotive work.gif cropped 20 % horizontally, 20 % vertically, 36 % areawise using CropTool with precise mode. |
文件用途
没有页面使用本文件。