File:Flag_of_Uzbekistan_(construction_sheet).svg
維基百科,自由的 encyclopedia
原始檔案 (SVG 檔案,表面大小:1,292 × 691 像素,檔案大小:9 KB)
摘要
描述Flag of Uzbekistan (construction sheet).svg |
English: Flag of Uzbekistan — construction sheet |
日期 | |
來源 |
自己的作品. Geometry is based on the legal description and diagrams in Law No. 407-XII — 1991-11-18 (amended 2010-12-24).
The law does not specify the radius, diameter, or centre point of the inner arc of the crescent. The official diagram that accompanies the legal text appears to have been drawn with an inner arc radius that is equal to the outer arc radius, but it is not explicitly labeled as such. This Wikimedia construction sheet has been created with the assumption that the outer and inner arc radii are both equal. With that assumption in place; the location of the centre point of the inner arc has been calculated and marked. |
作者 | MapGrid |
Notes and ramblings
units
For the purpose of these notes, a unit corresponds to the units used in this construction sheet. One unit is 1⁄125 the width of the flag or 1⁄250 the length of the flag.
miscellaneous stuff
- Given the specifications prescribed by the law, the minimal possible radius of the inner arc is roughly 14.790199 units, but as stated above we are assuming the inner arc radius to be equal to the outer arc radius (15 units).
- The outer arc of the crescent has an outer arc angle of about 199.188136° (measured tip to tip). Flag makers often break the specifications and create crescents with an angle of closer to 270°. To to this, something has to give; usually the gap between the stars is changed or the crescent and stars consume a total width that is more than the 75 cm (units) prescribed in the law.
- An old hand drawn government construction sheet can still be viewed online; it is not without issues and it may be part of the reason why the specifications are not adhered to. Measurements from the old construction sheet show a vertical gap between the stars of about 6 units and a horizontal gap of about 4 units. The vertical gap is labeled as "6", but the horizontal gap is not labeled at all. The law says that both vertical and horizontal gaps are supposed to be 6 units. By reducing the horizontal gap from 6 to 4, the space left over for the crescent on the left side of the 75x30 rectangle was increased by 8 units. This increased the overall width of the crescent which in turn increased the angle of the outer arc to about 270°. The larger arc angle allowed for a smaller inner arc arc radius... indeed, the drawing has an unlabeled inner arc radius of roughly 26 units.
- The 2012 Olympic Flags and Anthems Manual shows a outer arc angle of about 260° and a very small inner arc radius of about 23 units. Unintentionally or not, it gives the look of a partial solar eclipse instead of a new moon.
- Somebody documented the problems with the old government construction sheet on Reddit.
- The newer government construction sheet that accompanies law 407-XII is drawn properly to scale and it appears to clarify all the major issues present in the old construction sheet.
but questions linger
- Which came first... the law or the original construction sheet?
- Is it possible that the designer wanted an outer arc of 260° or 270° but failed to create a drawing that could properly be deciphered by a legal team?
授權條款
Public domainPublic domainfalsefalse |
This work is not an object of copyright according to article 8 of the Law of the Republic of Uzbekistan No. 42 of July 20, 2006 on Copyright and Neighbouring Rights.
Article 8. Works and similar results of activity not being the objects of copyright
|
||
Comment: according to interstate and international compacts Uzbekistan is the legal successor of the Uzbek Soviet Socialist Republic, therefore this license tag is also applicable to official symbols and formal documents of the Uzbek SSR. English ∙ oʻzbekcha/ўзбекча ∙ русский ∙ +/− |
這幅圖片所顯示的是旗幟、盾徽、印章或其他正式的徽章。在某些國家或地區使用此符號可能會受到限制,但是這些限制與版權問題無關。 |
2 1 2022
image/svg+xml
檔案歷史
點選日期/時間以檢視該時間的檔案版本。
日期/時間 | 縮圖 | 尺寸 | 使用者 | 備註 | |
---|---|---|---|---|---|
目前 | 2023年3月24日 (五) 04:57 | 1,292 × 691(9 KB) | MapGrid | Added an opaque background. No change to flag geometry. | |
2022年1月2日 (日) 16:17 | 1,292 × 691(8 KB) | MapGrid | Minor cosmetic tweaks. No changes to flag geometry. | ||
2022年1月2日 (日) 13:20 | 1,292 × 691(9 KB) | MapGrid | Uploaded own work with UploadWizard |
檔案用途
沒有使用此檔案的頁面。
全域檔案使用狀況
以下其他 wiki 使用了這個檔案:
- ar.wikipedia.org 的使用狀況
- ca.wikipedia.org 的使用狀況
- cs.wikipedia.org 的使用狀況
- en.wikipedia.org 的使用狀況
- kaa.wikipedia.org 的使用狀況
- kk.wikipedia.org 的使用狀況
- ko.wikipedia.org 的使用狀況
- nl.wikipedia.org 的使用狀況
- pl.wikipedia.org 的使用狀況
- ru.wikipedia.org 的使用狀況
- wikisource.org 的使用狀況
- tr.wikipedia.org 的使用狀況
- uk.wikipedia.org 的使用狀況
- uz.wikipedia.org 的使用狀況
詮釋資料
此檔案中包含其他資訊,這些資訊可能是由數位相機或掃描器在建立或數位化過程中所新增的。若檔案自原始狀態已被修改,一些詳細資料可能無法完整反映出已修改的檔案。
簡稱 | Flag of Uzbekistan — construction sheet |
---|---|
寬度 | 1292 |
高度 | 691 |