NodeMCU是一个开源[4]的物联网平台。 它使用Lua脚本语言编程[4]。该平台基于eLua [5]开源项目,底层使用ESP8266 sdk 0.9.5版本。该平台使用了很多开源项目, 例如 lua-cjson[6], spiffs[7]. NodeMCU包含了可以运行在 esp8266 Wi-Fi SoC芯片之上的固件,以及基于ESP-12模组的硬件。
History
NodeMCU is started after ESP8266 come out. In December 30, 2013, Espressif systems begin production of ESP8266.[8] ESP8266 is an Wi-Fi SoC and integrated with LX106 core, widely used in IoT applications(See related projects[9][10][11]). In 13 Oct 2014, Hong committed first file of nodemcu-firmware to github,[12] NodeMCU project started. And then more and more developers from ESP8266 opensource community join in NodeMCU developer team. On 1 Dec 2014, Huang R commit the gerber file of an ESP8266 board, then NodeMCU project have the first open-hardware which named devkit 1.0,[13] thus NodeMCU is not only a firmware, it becomes a platform. In 31 Dec 2014, Tuan PM port MQTT client library from Contiki to ESP8266 SoC platform,[14] and commit to NodeMCU project, then NodeMCU can support MQTT IoT protocol, using Lua access MQTT broker, it is an important update of firmware. Another important update is in 30 Jan 2015, Devsaurus port u8glib[15] to NodeMCU project,[16] and NodeMCU can drive LCD, Screen, OLED, even VGA display module easily.
 | 此条目包含指南或教学内容。 (2015年4月2日) |
| 此条目需要精通或熟悉相关主题的编者参与及协助编辑。 (2015年4月2日) |
固件烧写
nodemcu_latest.bin: 0x00000
对于大多数 esp8266 模块, 直接拉低 GPIO0 引脚的电平，并且重新上电或重启。
可以使用 nodemcu-flasher（页面存档备份，存于互联网档案馆） 烧写固件[17]。
特别的，如果你想编译/构建自己的固件，需要注意以下烧写地址：
0x00000.bin: 0x00000
0x10000.bin: 0x10000
注意，在烧写之后，最好执行 file.format()
硬体连接
如果使用 NodeMCU devkit, 只需要安装 CH340G 驱动程式[17], 并且将开发模组使用micro-usb 线连接到电脑。 然后，将波特率设为9600, 并打开序列埠。若使用普通的esp8266模组, 则必须准备usb-ttl 转接器。
程式举例
ip = wifi.sta.getip()
print(ip)
--nil
wifi.setmode(wifi.STATION)
wifi.sta.config("SSID","password")
ip = wifi.sta.getip()
print(ip)
--192.168.18.110
pin = 1
gpio.mode(pin,gpio.OUTPUT)
gpio.write(pin,gpio.HIGH)
print(gpio.read(pin))
-- A simple http client
conn=net.createConnection(net.TCP, 0)
conn:on("receive", function(conn, payload) print(payload) end )
conn:connect(80,"115.239.210.27")
conn:send("GET / HTTP/1.1\r\nHost: www.baidu.com\r\n"
.."Connection: keep-alive\r\nAccept: */*\r\n\r\n")
-- A simple http server
srv=net.createServer(net.TCP)
srv:listen(80,function(conn)
conn:on("receive",function(conn,payload)
print(payload)
conn:send("<h1> Hello, NodeMcu.</h1>")
end)
conn:on("sent",function(conn) conn:close() end)
end)
-- init mqtt client with keepalive timer 120sec
m = mqtt.Client("clientid", 120, "user", "password")
-- setup Last Will and Testament (optional)
-- Broker will publish a message with qos = 0, retain = 0, data = "offline"
-- to topic "/lwt" if client don't send keepalive packet
m:lwt("/lwt", "offline", 0, 0)
m:on("connect", function(con) print ("connected") end)
m:on("offline", function(con) print ("offline") end)
-- on publish message receive event
m:on("message", function(conn, topic, data)
print(topic .. ":" )
if data ~= nil then
print(data)
end
end)
-- for secure: m:connect("192.168.11.118", 1880, 1)
m:connect("192.168.11.118", 1880, 0, function(conn) print("connected") end)
-- subscribe topic with qos = 0
m:subscribe("/topic",0, function(conn) print("subscribe success") end)
-- or subscribe multiple topic (topic/0, qos = 0; topic/1, qos = 1; topic2 , qos = 2)
-- m:subscribe({["topic/0"]=0,["topic/1"]=1,topic2=2}, function(conn) print("subscribe success") end)
-- publish a message with data = hello, QoS = 0, retain = 0
m:publish("/topic","hello",0,0, function(conn) print("sent") end)
m:close();
-- you can call m:connect again
-- a udp server
s=net.createServer(net.UDP)
s:on("receive",function(s,c) print(c) end)
s:listen(5683)
-- a udp client
cu=net.createConnection(net.UDP)
cu:on("receive",function(cu,c) print(c) end)
cu:connect(5683,"192.168.18.101")
cu:send("hello")
引用文献
Wikiwand in your browser!
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.
