Catenary arch
Architectural pointed arch that follows an inverted catenary curve From Wikipedia, the free encyclopedia
A catenary arch is a type of architectural arch that follows an inverted catenary curve. The catenary curve has been employed in buildings since ancient times. It forms an underlying principle to the overall system of vaults and buttresses in stone vaulted Gothic cathedrals and in Renaissance domes.[1] It is not a parabolic arch, although the non-circumferential curves used in arch designs (parabola, catenary, and weighted catenary) look similar, and match at shallow profiles, so a catenary is often misclassified as a parabola[2] (per Galileo, "the [hanging] chain fits its parabola almost perfectly"[3]).
In history
The 17th-century scientist Robert Hooke wrote: "Ut pendet continuum flexile, sic stabit contiguum rigidum inversum", or, "As hangs a flexible cable so, inverted, stand the touching pieces of an arch."[4]
A note written by Thomas Jefferson in 1788 reads, "I have lately received from Italy a treatise on the equilibrium of arches, by the Abbé Mascheroni. It appears to be a very scientific work. I have not yet had time to engage in it; but I find that the conclusions of his demonstrations are, that every part of the catenary is in perfect equilibrium".[5]
Structural properties
Summarize
Perspective
Architecturally, a catenary arch has the ability to withstand the weight of the material from which it is constructed, without collapsing.[6][7] For an arch of uniform density and thickness, supporting only its own weight, the catenary is the ideal curve.[8]
Catenary arches are strong because they redirect the vertical force of gravity into compression forces pressing along the arch's curve. In a uniformly loaded catenary arch, the line of thrust runs through its center.[9][10]
This principle has been employed architecturally to create arched structures that follow exactly, and in a visibly apparent way, the form of an inverted catenary. A significant early example of this is the arch of Taq Kasra. The catenary, spun 180 degrees, forms the structure of simple domed building such as the beehive homes of the Dingle Peninsula, Ireland.
The principle of the catenary is also the underlying factor in the much more complex architectural systems of the Medieval and Renaissance architecture. Buildings that have heavy roofs that are arched in shape and deliver a strong outward thrust must comply with the form of the catenary curve in order not to collapse. This does not imply that the arches themselves are catenary in form, but that the total system of walls or buttresses that support the roof or dome contain a catenary curve, which delivers the downward thrust.
In the 15th century Brunelleschi designed the pointed, octagonal, Gothic dome on Florence Cathedral in a manner that utilised the principle of the catenary arch.[citation needed] In the 17th century, Christopher Wren designed the dome of St Paul's Cathedral based directly on a catenary curve. The vaulted roof and buttresses of Kings College Chapel, Cambridge, have been discovered to comply with the formula of the catenary arch.[citation needed]
Examples
Summarize
Perspective
The classification of non-circumferential curves in actual arches is hard. González et al. provide an example of (well-studied) Palau Güell, where researchers do not agree on classification of the arches or claim the prominence of parabolic arches, while the accurate measurements show that just two of the 23 arches designed by Gaudi are actually parabolic.[11]
Ancient arches
The curves close in shape to catenary were used in arches of Ramesseum (13th century BC) and Arch of Ctesiphon (6th century AD).[12]
The unfinished Saqqara ostracon has a catenary shape.[13]
Cathedrals and churches
- King’s College Chapel, in Cambridge, England[14]
- St Paul's Dome[15]
- Brunelleschi's Dome[16][17]
- Casa Batlló has catenary arches[18]
- Casa Mila, in Barcelona, Spain[19] was designed by Antoni Gaudi, who used many catenary arches[20][21]
- Church of Colònia Güell[22]
Natural arches
Rainbow Natural Bridge in the U.S. state of Utah has a natural catenary shape, possibly produced by weathering in high-stress areas.[23] Kolob Arch and Landscape Arch, also in Utah, have a catenary shape as well.[24][25]
Human-made arches
The Gateway Arch in the American city of St. Louis (Missouri) is a catenary arch[26] Due to more strength needed at the bottom, the bottom of this arch is wider than the top, so the actual shape is technically a "weighted catenary".[27]
High-rises
Marquette Plaza in Minneapolis used catenary arches.[28][29]
Kilns
Kilns are often designed with catenary arch cross-section.[30]
Igloos
Igloos are designed with a catenary arch cross-section.[31][23] This shape offers an optimal balance between height and diameter, avoiding the risk of collapsing under the weight of compacted snow.[23]
Other architecture
The inside of Budapest’s Keleti Railway Station forms a catenary arch.[32]
The Nubian ton is a burial vault, of Nubia, For greatest stability, the structure’s cross-section follows a catenary arch.[33]
The beehive homes (clocháns) of Ireland’s Skellig Michael have a cross-section that follows the style of a catenary arch.[34]
Homes
The Rice House has catenary arches.[35]
Hotels
Bridges
A catenary bridge has the form of a catenary arch.
Monuments
In Iraq, the Taq Kasra has the shape of a catenary arch.[38]
Airports
The roof of Washington Dulles International Airport is a suspended catenary curve.[39]
A catenary steel cable system supports the roof of Denver International Airport.[40]
Train stations
New York City’s Pennsylvania Station has a roof in the form of a catenary arch.[41]
Banks
On the Federal Reserve Bank of Minneapolis, the building has been remodeled, but still visible is the catenary arch suspending the original building.[42]
Mud huts
Cameroon's musgum mud huts have a catenary cross-section.[43][44][45]
See also
References
Sources
External links
Wikiwand - on
Seamless Wikipedia browsing. On steroids.