Loading AI tools
Energy efficiency standard for buildings From Wikipedia, the free encyclopedia
A Zero-Energy Building (ZEB), also known as a Net Zero-Energy (NZE) building, is a building with net zero energy consumption, meaning the total amount of energy used by the building on an annual basis is equal to the amount of renewable energy created on the site[1][2] or in other definitions by renewable energy sources offsite, using technology such as heat pumps, high efficiency windows and insulation, and solar panels.[3]
This article's lead section may be too short to adequately summarize the key points. (November 2020) |
The goal is that these buildings contribute less overall greenhouse gas to the atmosphere during operation than similar non-ZNE buildings. They do at times consume non-renewable energy and produce greenhouse gases, but at other times reduce energy consumption and greenhouse gas production elsewhere by the same amount. The development of zero-energy buildings is encouraged by the desire to have less of an impact on the environment, and their expansion is encouraged by tax breaks and savings on energy costs which make zero-energy buildings financially viable.
Terminology tends to vary between countries, agencies, cities, towns, and reports, so a general knowledge of this concept and its various uses is essential for a versatile understanding of clean energy and renewables.[4][5][6] The International Energy Agency (IEA) and European Union (EU) most commonly use "Net Zero Energy", with the term "zero net" being mainly used in the US. A similar concept approved and implemented by the European Union and other agreeing countries is nearly Zero Energy Building (nZEB), with the goal of having all new buildings in the region under nZEB standards by 2020.[7]
Typical code-compliant buildings consume 40% of the total fossil fuel energy in the US and European Union and are significant contributors of greenhouse gases.[8][9] To combat such high energy usage, more and more buildings are starting to implement the carbon neutrality principle, which is viewed as a means to reduce carbon emissions and reduce dependence on fossil fuels. Although zero-energy buildings remain limited, even in developed countries, they are gaining importance and popularity.[citation needed]
Most zero-energy buildings use the electrical grid for energy storage but some are independent of the grid and some include energy storage onsite. The buildings are called "energy-plus buildings" or in some cases "low energy houses". These buildings produce energy onsite using renewable technology like solar and wind, while reducing the overall use of energy with highly efficient lightning and heating, ventilation, and air conditioning (HVAC) technologies. The zero-energy goal is becoming more practical as the costs of alternative energy technologies decrease and the costs of traditional fossil fuels increase.[10]
The development of modern zero-energy buildings became possible largely through the progress made in new energy and construction technologies and techniques. These include highly insulating spray-foam insulation, high-efficiency solar panels, high-efficiency heat pumps and highly insulating, low emissivity, triple and quadruple-glazed windows.[11][12] These innovations have also been significantly improved by academic research, which collects precise energy performance data on traditional and experimental buildings and provides performance parameters for advanced computer models to predict the efficacy of engineering designs.
Zero-energy buildings can be part of a smart grid. Some advantages of these buildings are as follows:
Although the net zero concept is applicable to a wide range of resources, water and waste, energy is usually the first resource to be targeted because:
The introduction of zero-energy buildings makes buildings more energy efficient and reduces the rate of carbon emissions once the building is in operation; however, there is still a lot of pollution associated with a building's embodied carbon.[14] Embodied carbon is the carbon emitted in the making and transportation of a building's materials and construction of the structure itself; it is responsible for 11% of global GHG emissions and 28% of global building sector emissions.[14] The importance of embodied carbon will grow as it will begin to account for the greater portion of a building's carbon emissions. In some newer, energy efficient buildings, embodied carbon has risen to 47% of the building's lifetime emissions.[15] Focusing on embodied carbon is part of optimizing construction for climate impact and zero carbon emissions requires slightly different considerations from optimizing only for energy efficiency.[16][17][18]
A 2019 study found that between 2020 and 2030, reducing upfront carbon emissions and switching to clean or renewable energy is more important than increasing building efficiency because "building a highly energy efficient structure can actually produce more greenhouse gas than a basic code compliant one if carbon-intensive materials are used."[19] The study stated that because "Net-zero energy codes will not significantly reduce emissions in time, policy makers and regulators must aim for true net zero carbon buildings, not net zero energy buildings."[19]
One way to reduced embodied carbon is by using low-carbon materials for construction such as straw, wood, linoleum, or cedar. For materials like concrete and steel, options to reduce embodied emissions do exist, however, these are unlikely to be available at large scale in the short-term.[20] In conclusion, it has been determined that the optimal design point for greenhouse gas reduction appeared to be at four story multifamily buildings of low-carbon materials, such as those listed above, which could be a template for low-carbon emitting structures.[19]
Despite sharing the name "zero net energy", there are several definitions of what the term means in practice, with a particular difference in usage between North America and Europe.[4][5][6]
Within this balancing procedure several aspects and explicit choices have to be determined:[27][28][29]
The most cost-effective steps toward a reduction in a building's energy consumption usually occur during the design process.[31] To achieve efficient energy use, zero energy design departs significantly from conventional construction practice. Successful zero energy building designers typically combine time tested passive solar, or artificial/fake conditioning, principles that work with the on-site assets. Sunlight and solar heat, prevailing breezes, and the cool of the earth below a building, can provide daylighting and stable indoor temperatures with minimum mechanical means. ZEBs are normally optimized to use passive solar heat gain and shading, combined with thermal mass to stabilize diurnal temperature variations throughout the day, and in most climates are superinsulated.[32] All the technologies needed to create zero energy buildings are available off-the-shelf today.
Sophisticated 3-D building energy simulation tools are available to model how a building will perform with a range of design variables such as building orientation (relative to the daily and seasonal position of the sun), window and door type and placement, overhang depth, insulation type and values of the building elements, air tightness (weatherization), the efficiency of heating, cooling, lighting, and other equipment, as well as local climate. These simulations help the designers predict how the building will perform before it is built, and enable them to model the economic and financial implications on building cost benefit analysis, or even more appropriate – life-cycle assessment.[citation needed]
Zero-energy buildings are built with significant energy-saving features. The heating and cooling loads are lowered by using high-efficiency equipment (such as heat pumps rather than furnaces. Heat pumps are about four times as efficient as furnaces) added insulation (especially in the attic and in the basement of houses), high-efficiency windows (such as low emissivity, triple-glazed windows), draft-proofing, high efficiency appliances (particularly modern high-efficiency refrigerators), high-efficiency LED lighting, passive solar gain in winter and passive shading in the summer, natural ventilation, and other techniques. These features vary depending on climate zones in which the construction occurs. Water heating loads can be lowered by using water conservation fixtures, heat recovery units on waste water, and by using solar water heating, and high-efficiency water heating equipment. In addition, daylighting with skylights or solartubes can provide 100% of daytime illumination within the home. Nighttime illumination is typically done with fluorescent and LED lighting that use 1/3 or less power than incandescent lights, without adding unwanted heat. And miscellaneous electric loads can be lessened by choosing efficient appliances and minimizing phantom loads or standby power. Other techniques to reach net zero (dependent on climate) are Earth sheltered building principles, superinsulation walls using straw-bale construction, pre-fabricated building panels and roof elements plus exterior landscaping for seasonal shading.[citation needed]
Once the energy use of the building has been minimized it can be possible to generate all that energy on site using roof-mounted solar panels. See examples of zero net energy houses here.[citation needed]
Zero-energy buildings are often designed to make dual use of energy including that from white goods. For example, using refrigerator exhaust to heat domestic water, ventilation air and shower drain heat exchangers, office machines and computer servers, and body heat to heat the building. These buildings make use of heat energy that conventional buildings may exhaust outside. They may use heat recovery ventilation, hot water heat recycling, combined heat and power, and absorption chiller units.[citation needed]
ZEBs harvest available energy to meet their electricity and heating or cooling needs. By far the most common way to harvest energy is to use roof-mounted solar photovoltaic panels that turn the sun's light into electricity. Energy can also be harvested with solar thermal collectors (which use the sun's heat to heat water for the building). Heat pumps can also harvest heat and cool from the air (air-sourced) or ground near the building (ground-sourced otherwise known as geothermal). Technically, heat pumps move heat rather than harvest it, but the overall effect in terms of reduced energy use and reduced carbon footprint is similar. In the case of individual houses, various microgeneration technologies may be used to provide heat and electricity to the building, using solar cells or wind turbines for electricity, and biofuels or solar thermal collectors linked to a seasonal thermal energy storage (STES) for space heating. An STES can also be used for summer cooling by storing the cold of winter underground. To cope with fluctuations in demand, zero energy buildings are frequently connected to the electricity grid, export electricity to the grid when there is a surplus, and drawing electricity when not enough electricity is being produced.[4] Other buildings may be fully autonomous.[citation needed]
Energy harvesting is most often more effective in regards to cost and resource utilization when done on a local but combined scale, for example a group of houses, cohousing, local district or village rather than an individual house basis. An energy benefit of such localized energy harvesting is the virtual elimination of electrical transmission and electricity distribution losses. On-site energy harvesting such as with roof top mounted solar panels eliminates these transmission losses entirely. Energy harvesting in commercial and industrial applications should benefit from the topography of each location. However, a site that is free of shade can generate large amounts of solar powered electricity from the building's roof and almost any site can use geothermal or air-sourced heat pumps. The production of goods under net zero fossil energy consumption requires locations of geothermal, microhydro, solar, and wind resources to sustain the concept.[33]
Zero-energy neighborhoods, such as the BedZED development in the United Kingdom, and those that are spreading rapidly in California and China, may use distributed generation schemes. This may in some cases include district heating, community chilled water, shared wind turbines, etc. There are current plans to use ZEB technologies to build entire off-the-grid or net zero energy use cities.
One of the key areas of debate in zero energy building design is over the balance between energy conservation and the distributed point-of-use harvesting of renewable energy (solar energy, wind energy, and thermal energy). Most zero energy homes use a combination of these strategies.[citation needed]
As a result of significant government subsidies for photovoltaic solar electric systems, wind turbines, etc., there are those who suggest that a ZEB is a conventional house with distributed renewable energy harvesting technologies. Entire additions of such homes have appeared in locations where photovoltaic (PV) subsidies are significant,[34] but many so called "Zero Energy Homes" still have utility bills. This type of energy harvesting without added energy conservation may not be cost effective with the current [when?] price of electricity generated with photovoltaic equipment, depending on the local price of power company electricity.[35] The cost, energy and carbon-footprint savings from conservation (e.g., added insulation, triple-glazed windows and heat pumps) compared to those from on-site energy generation (e.g., solar panels) have been published for an upgrade to an existing house here.
Since the 1980s, passive solar building design and passive house have demonstrated heating energy consumption reductions of 70% to 90% in many locations, without active energy harvesting. For new builds, and with expert design, this can be accomplished with little additional construction cost for materials over a conventional building. Very few industry experts have the skills or experience to fully capture benefits of the passive design.[36] Such passive solar designs are much more cost-effective than adding expensive photovoltaic panels on the roof of a conventional inefficient building.[35] A few kilowatt-hours of photovoltaic panels (costing the equivalent of about US$2-3 dollars per annual kWh production) may only reduce external energy requirements by 15% to 30%. A 29 kWh (100,000 BTU) high seasonal energy efficiency ratio 14 conventional air conditioner requires over 7 kW of photovoltaic electricity while it is operating, and that does not include enough for off-the-grid night-time operation. Passive cooling, and superior system engineering techniques, can reduce the air conditioning requirement by 70% to 90%. Photovoltaic-generated electricity becomes more cost-effective when the overall demand for electricity is lower.[citation needed]
Companies in Germany and the Netherlands offer rapid climate retrofit packages for existing buildings, which add a custom designed shell of insulation to the outside of a building, along with upgrades for more sustainable energy use, such as heat pumps. Similar pilot projects are underway in the US.[37][38]
The energy used in a building can vary greatly depending on the behavior of its occupants. The acceptance of what is considered comfortable varies widely. Studies of identical homes have shown dramatic differences in energy use in a variety of climates. An average widely accepted ratio of highest to lowest energy consumer in identical homes is about 3, with some identical homes using up to 20 times as much heating energy as the others.[39] Occupant behavior can vary from differences in setting and programming thermostats, varying levels of illumination and hot water use, window and shading system operation and the amount of miscellaneous electric devices or plug loads used.[40]
Utility companies are typically legally responsible for maintaining the electrical infrastructure that brings power to our cities, neighborhoods, and individual buildings. Utility companies typically own this infrastructure up to the property line of an individual parcel, and in some cases own electrical infrastructure on private land as well.[citation needed]
In the US utilities have expressed concern that the use of Net Metering for ZNE projects threatens the utilities base revenue, which in turn impacts their ability to maintain and service the portion of the electrical grid that they are responsible for. Utilities have expressed concern that states that maintain Net Metering laws may saddle non-ZNE homes with higher utility costs, as those homeowners would be responsible for paying for grid maintenance while ZNE home owners would theoretically pay nothing if they do achieve ZNE status. This creates potential equity issues, as currently, the burden would appear to fall on lower-income households. A possible solution to this issue is to create a minimum base charge for all homes connected to the utility grid, which would force ZNE home owners to pay for grid services independently of their electrical use.[citation needed]
Additional concerns are that local distribution as well as larger transmission grids have not been designed to convey electricity in two directions, which may be necessary as higher levels of distributed energy generation come on line. Overcoming this barrier could require extensive upgrades to the electrical grid, however, as of 2010, this is not believed to be a major problem until renewable generation reaches much higher levels of penetration.[41]
Wide acceptance of zero-energy building technology may require more government incentives or building code regulations, the development of recognized standards, or significant increases in the cost of conventional energy.[42]
The Google photovoltaic campus and the Microsoft 480-kilowatt photovoltaic campus relied on US Federal, and especially California, subsidies and financial incentives. California is now providing US$3.2 billion in subsidies[43] for residential-and-commercial near-zero-energy buildings. The details of other American states' renewable energy subsidies (up to US$5.00 per watt) can be found in the Database of State Incentives for Renewables and Efficiency.[44] The Florida Solar Energy Center has a slide presentation on recent progress in this area.[45]
The World Business Council for Sustainable Development[46] has launched a major initiative to support the development of ZEB. Led by the CEO of United Technologies and the Chairman of Lafarge, the organization has both the support of large global companies and the expertise to mobilize the corporate world and governmental support to make ZEB a reality. Their first report, a survey of key players in real estate and construction, indicates that the costs of building green are overestimated by 300 percent. Survey respondents estimated that greenhouse gas emissions by buildings are 19 percent of the worldwide total, in contrast to the actual value of roughly 40 percent.[47]
Those who commissioned construction of passive houses and zero-energy homes (over the last three decades[when?]) were essential to iterative, incremental, cutting-edge, technology innovations. Much has been learned from many significant successes, and a few expensive failures.[48]
The zero-energy building concept has been a progressive evolution from other low-energy building designs. Among these, the Canadian R-2000 and the German passive house standards have been internationally influential. Collaborative government demonstration projects, such as the superinsulated Saskatchewan House, and the International Energy Agency's Task 13, have also played their part.[5]
The US National Renewable Energy Laboratory (NREL) published a report called Net-Zero Energy Buildings: A Classification System Based on Renewable Energy Supply Options.[3] This is the first report to lay out a full spectrum classification system for Net Zero/Renewable Energy buildings that includes the full spectrum of Clean Energy sources, both on site and off site. This classification system identifies the following four main categories of Net Zero Energy Buildings/Sites/Campuses:
Applying this US Government Net Zero classification system means that every building can become net nero with the right combination of the key net zero technologies - PV (solar), GHP (geothermal heating and cooling, thermal batteries), EE (energy efficiency), sometimes wind, and electric batteries. A graphical exposé of the scale of impact of applying these NREL guidelines for net zero can be seen in the graphic at Net Zero Foundation titled "Net Zero Effect on U.S. Total Energy Use"[49] showing a possible 39% US total fossil fuel use reduction by changing US residential and commercial buildings to net zero, 37% savings if we still use natural gas for cooking at the same level.
Many well known universities have professed to want to completely convert their energy systems off of fossil fuels. Capitalizing on the continuing developments in both photovoltaics and geothermal heat pump technologies, and in the advancing electric battery field, complete conversion to a carbon free energy solution is becoming easier. Large scale hydroelectric has been around since before 1900. An example of such a project is in the Net Zero Foundation's proposal at MIT to take that campus completely off fossil fuel use.[50] This proposal shows the coming application of Net Zero Energy Buildings technologies at the District Energy scale.
The goal of green building and sustainable architecture is to use resources more efficiently and reduce a building's negative impact on the environment.[56] Zero energy buildings achieve one key goal of exporting as much renewable energy as it uses over the course of year; reducing greenhouse gas emissions.[57] ZEB goals need to be defined and set, as they are critical to the design process.[58] Zero energy buildings may or may not be considered "green" in all areas, such as reducing waste, using recycled building materials, etc. However, zero energy, or net-zero buildings do tend to have a much lower ecological impact over the life of the building compared with other "green" buildings that require imported energy and/or fossil fuel to be habitable and meet the needs of occupants.[citation needed]
Both terms, zero energy buildings and green buildings, have similarities and differences. "Green" buildings often focus on operational energy, and disregard the embodied carbon footprint from construction.[59] According to the IPCC, embodied carbon will make up half of the total carbon emissions between now[2020] and 2050.[59] On the other hand, zero energy buildings are specifically designed to produce enough energy from renewable energy sources to meet its own consumption requirements, and green buildings can be generally defined as a building that reduces negative impacts or positively impacts our natural environment [1-NEWUSDE].[60][61] There are several factors that must be considered before a building is determined to be a green building. Building a green building must include an efficient use of utilities such as water and energy, use of renewable energy, use of recycling and reusing practices to reduce waste, provide proper indoor air quality, use of ethically sourced and non-toxic materials, use of a design that allows the building to adapt to changing environmental climates, and aspects of the design, construction, and operational process that address the environment and quality of life of its occupants. The term green building can also be used to refer to the practice of green building which includes being resource efficient from its design, to its construction, to its operational processes, and ultimately to its deconstruction.[62] The practice of green building differs slightly from zero energy buildings because it considers all environmental impacts such as use of materials and water pollution for example, whereas the scope of zero energy buildings only includes the buildings energy consumption and ability to produce an equal amount, or more, of energy from renewable energy sources.
There are many unforeseen design challenges and site conditions required to efficiently meet the renewable energy needs of a building and its occupants, as much of this technology is new. Designers must apply holistic design principles, and take advantage of the free naturally occurring assets available, such as passive solar orientation, natural ventilation, daylighting, thermal mass, and night time cooling. Designers and engineers must also experiment with new materials and technological advances, striving for more affordable and efficient production.[63]
With advances in ultra low U-value glazing a (nearly) zero heating building is proposed to supersede nearly-zero energy buildings in EU. The zero heating building reduces on the passive solar design and makes the building more opened to conventional architectural design. The zero heating building removes the need for seasonal / winter utility power reserve. The annual specific heating demand for the zero-heating house should not exceed 3 kWh/m2a. Zero heating building is simpler to design and to operate. For example: there is no need for modulated sun shading.
The two most common certifications for green building are Passive House, and LEED.[64] The goal of Passive House is to be energy efficient and reduce the use of heating/cooling to below standard.[64] LEED certification is more comprehensive in regards to energy use, a building is awarded credits as it demonstrates sustainable practices across a range of categories.[64] Another certification that designates a building as a net zero energy building exists within the requirements of the Living Building Challenge (LBC) called the Net Zero Energy Building (NZEB) certification provided by the International Living Future Institute (ILFI).[65] The designation was developed in November 2011 as the NZEB certification but was then simplified to the Zero Energy Building Certification in 2017.[66] Included in the list of green building certifications, the BCA Green Mark rating system allows for the evaluation of buildings for their performance and impact on the environment[67]
![]() | This section needs to be updated. (May 2019) |
As a response to global warming and increasing greenhouse gas emissions, countries around the world have been gradually implementing different policies to tackle ZEB. Between 2008 and 2013, researchers from Australia, Austria, Belgium, Canada, Denmark, Finland, France, Germany, Italy, the Republic of Korea, New Zealand, Norway, Portugal, Singapore, Spain, Sweden, Switzerland, the United Kingdom and the US worked together in the joint research program called "Towards Net Zero Energy Solar Buildings". The program was created under the umbrella of International Energy Agency (IEA) Solar Heating and Cooling Program (SHC) Task 40 / Energy in Buildings and Communities (EBC, formerly ECBCS) Annex 52 with the intent of harmonizing international definition frameworks regarding net-zero and very low energy buildings by diving them into subtasks.[68] In 2015, the Paris Agreement was created under the United Nations Framework Convention on Climate Change (UNFCC) with the intent of keeping the global temperature rise of the 21st century below 2 degrees Celsius and limiting temperature increase to 1.5 degrees Celsius by limiting greenhouse gas emissions.[69] While there was no enforced compliance, 197 countries signed the international treaty which bound developed countries legally through a mutual cooperation where each party would update its INDC every five years and report annually to the COP.[70] Due to the advantages of energy efficiency and carbon emission reduction, ZEBs are widely being implemented in many different countries as a solution to energy and environmental problems within the infrastructure sector.[71]
National trajectory
In Australia, the Trajectory for Low Energy Buildings and its Addendum were agreed by all Commonwealth, state and territory energy ministers in 2019.
The Trajectory is a national plan that aims to achieve zero energy and carbon-ready commercial and residential buildings in Australia. It is a key initiative to address Australia’s 40% energy productivity improvement target by 2030 under the National Energy Productivity Plan.
On 7 July 2023, the Energy and Climate Change Ministerial Council agreed to update the Trajectory for Low Energy Buildings by the end of 2024.[72]
The updates to the Trajectory will:
ZEB in Australia
In Belgium there is a project with the ambition to make the Belgian city Leuven climate-neutral in 2030.[74]
In Brazil, the Ordinance No. 42, of February 24, 2021, approved the Inmetro Normative Instruction for the Classification of Energy Efficiency of Commercial, Service and Public Buildings (INI-C), which improves the Technical Quality Requirements for the Energy Efficiency Level of Commercial, Service and Public Buildings (RTQ-C), specifying the criteria and methods for classifying commercial, service and public buildings as to their energy efficiency. Annex D presents the procedures for determining the potential for local renewable energy generation and the assessment conditions for Near Zero Energy Buildings (NZEBs) and Positive Energy Buildings (PEBs).[75]
With an estimated population of 1,439,323,776 people, China has become one of the world's leading contributor to greenhouse gas emissions due to its ongoing rapid urbanization. Even with the growing increase in building infrastructure, China has long been considered as a country where the overall energy demand has consistently grown less rapidly than the gross domestic product (GDP) of China.[85] Since the late 1970s, China has been using half as much energy as it did in 1997, but due to its dense population and rapid growth of infrastructure, China has become the world's second largest energy consumer and is in a position to become the leading contributor to greenhouse gas emissions in the next century.[85]
Since 2010, Chinese government has been driven by the release of new national policies to increase ZEB design standards and has also laid out a series of incentives to increase ZEB projects in China.[71] In November 2015, China's Ministry of Housing and Urban-Rural Development (MOHURD) released a technical guide regarding passive and low energy green residential buildings.[71] This guide was aimed at improving energy efficiency in China's infrastructure and was also the first of its kind to be formally released as a guide for energy efficiency.[71] Also, with rapid growth in ZEBs in the last three years, there is an estimated influx of ZEBs to be built in China by 2020 along with the existing ZEB projects that are already built.[71]
As a response to the Paris Agreement in 2015, China stated that it set a target of reducing peak carbon emissions around 2030 while also aiming to lower carbon dioxide emissions by 60-65 percent from 2005 emissions per unit of GDP.[70] In 2020, Chinese Communist Party leader Xi Jinping released a statement in his address to the UN General Assembly declaring that China would be carbon neutral by 2060 pushing forward climate change reforms.[86] With more than 95 percent of China's energy originating from fuel sources that emit carbon dioxide, carbon neutrality in China will require an almost complete transition to fuel sources such as solar power, wind, hydro, or nuclear power.[87] In order to achieve carbon neutrality, China's proposed energy quota policy will have to incorporate new monitoring and mechanisms that ensure accurate measurements of energy performance of buildings.[88] Future research should investigate the different possible challenges that could come up due to implementation of ZEB policies in China.[88]
Strategic Research Centre on Zero Energy Buildings was in 2009 established at Aalborg University by a grant from the Danish Council for Strategic Research (DSF), the Programme Commission for Sustainable Energy and Environment, and in cooperation with the Technical University of Denmark, Danish Technological Institute, The Danish Construction Association and some private companies. The purpose of the centre is through development of integrated, intelligent technologies for the buildings, which ensure considerable energy conservation and optimal application of renewable energy, to develop zero energy building concepts. In cooperation with the industry, the centre will create the necessary basis for a long-term sustainable development in the building sector.
India's first net zero building is Indira Paryavaran Bhawan, located in New Delhi, inaugurated in 2014. Features include passive solar building design and other green technologies.[93] High-efficiency solar panels are proposed. It cools air from toilet exhaust using a thermal wheel in order to reduce load on its chiller system. It has many water conservation features.[94]
In 2011, Payesh Energy House (PEH) or Khaneh Payesh Niroo by a collaboration of Fajr-e-Toseah Consultant Engineering Company[95] and Vancouver Green Homes Ltd] under management of Payesh Energy Group (EPG) launched the first Net-Zero passive house in Iran. This concept makes the design and construction of PEH a sample model and standardized process for mass production by MAPSA.[96]
Also, an example of the new generation of zero energy office buildings is the 24-story OIIC[97] Office Tower, which is started in 2011, as the OIIC Company headquarters. It uses both modest energy efficiency, and a big distributed renewable energy generation from both solar and wind. It is managed by Rahgostar Naft Company in Tehran, Iran. The tower is receiving economic support from government subsidies that are now funding many significant fossil-fuel-free efforts.[98]
In 2005, a private company launched the world's first standardised passive house in Ireland, this concept makes the design and construction of passive house a standardised process. Conventional low energy construction techniques have been refined and modelled on the PHPP (Passive House Design Package) to create the standardised passive house. Building offsite allows high precision techniques to be utilised and reduces the possibility of errors in construction.
In 2009 the same company started a project to use 23,000 liters of water in a seasonal storage tank, heated up by evacuated solar tubes throughout the year, with the aim to provide the house with enough heat throughout the winter months thus eliminating the need for any electrical heat to keep the house comfortably warm. The system is monitored and documented by a research team from The University of Ulster and the results will be included in part of a PhD thesis.
In 2012 Cork Institute of Technology started renovation work on its 1974 building stock to develop a net zero energy building retrofit.[99] The exemplar project will become Ireland's first zero energy testbed offering a post-occupancy evaluation of actual building performance against design benchmarks.
The first zero energy building in Jamaica and the Caribbean opened at the Mona Campus of the University of the West Indies (UWI) in 2017.[100] The 2300 square foot building was designed to inspire more sustainable and energy efficient buildings in the area.[100]
After the April 2011 Fukushima earthquake followed by the up with Fukushima Daiichi nuclear disaster, Japan experienced severe power crisis that led to the awareness of the importance of energy conservation.
In 2012 Ministry of Economy, Trade and Industry, Ministry of Land, Infrastructure, Transport and Tourism and Ministry of the Environment (Japan) summarized the road map for Low-carbon Society which contains the goal of ZEH and ZEB to be standard of new construction in 2020.[101]
The Mitsubishi Electric Corporation is underway with the construction of Japan's first zero energy office building, set to be completed in October, 2020 (as of September 2020).[102] The SUSTIE ZEB test facility is located in Kamakura, Japan, to develop ZEB technology.[102] With the net zero certification, the facility projects to reduce energy consumption by 103%.[103]
Japan has made it a goal that all new houses be net zero energy by 2030.[104] The developing company Sekisui House introduced their first net zero home in 2013, and is now planning Japan's first zero energy condominium in Nagoya City, it is a three-story building with 12 units.[105] There are solar panels on the roof and fuel cells for each unit to provide backup power.[106]
South Korea's Mandatory ZEB requirements, which have been previously applied to buildings with a GFA of 1,000 m2+ in 2021 will expand to buildings with a GFA of 500 m2+ in 2022, until being applicable to all public buildings starting in 2024. For private buildings, ZEB certification will be mandated for building permits with a GFA of over 100,000 m2 from 2023. After 2025, zero-energy construction for private buildings will be expanded to GFAs over 1,000 m2. The goal of the policy is to convert all public sector buildings to ZEB grade 3 (an energy independence rate of 60% ~ 80%), and all private buildings to ZEB grade 5 (an energy independence rate of 20% ~ 40%) by 2030.[107]
EnergyX DY-Building (에너지엑스 DY빌딩), the first commercial Net-Zero Energy Building (NZEB, or ZEB grade 1) and the first Plus Energy Building (+ZEB, or ZEB grade plus) in Korea was opened and introduced in 2023.[108] The energy technology and sustainable architectural platform company EnergyX developed, designed, and engineered the building with its proprietary technologies and services.[109] EnergyX DY-Building received the ZEB certification with an energy independence rate (or energy self-sufficiency rate) of 121.7%.[110]
In October 2007, the Malaysia Energy Centre (PTM) successfully completed the development and construction of the PTM Zero Energy Office (ZEO) Building. The building has been designed to be a super-energy-efficient building using only 286 kWh/day. The renewable energy – photovoltaic combination is expected to result in a net zero energy requirement from the grid. The building is currently undergoing a fine tuning process by the local energy management team. Findings are expected to be published in a year.[111]
In 2016, the Sustainable Energy Development Authority Malaysia (SEDA Malaysia) started a voluntary initiative called Low Carbon Building Facilitation Program. The purpose is to support the current low carbon cities program in Malaysia. Under the program, several project demonstration managed to reduce energy and carbon beyond 50% savings and some managed to save more than 75%. Continuous improvement of super energy efficient buildings with significant implementation of on-site renewable energy managed to make a few of them become nearly Zero Energy (nZEB) as well as Net-Zero Energy Building (NZEB). In March 2018, SEDA Malaysia has started the Zero Energy Building Facilitation Program.[112]
Malaysia also has its own sustainable building tool special for Low Carbon and zero energy building, called GreenPASS that been developed by the Construction Industry Development Board Malaysia (CIDB) in 2012, and currently being administered and promoted by SEDA Malaysia. GreenPASS official is called the Construction Industry Standard (CIS) 20:2012.
In September 2006, the Dutch headquarters of the World Wildlife Fund (WWF) in Zeist was opened. This earth-friendly building gives back more energy than it uses. All materials in the building were tested against strict requirements laid down by the WWF and the architect.[113]
In February 2009, the Research Council of Norway assigned The Faculty of Architecture and Fine Art at the Norwegian University of Science and Technology to host the Research Centre on Zero Emission Buildings (ZEB), which is one of eight new national Centres for Environment-friendly Energy Research (FME). The main objective of the FME-centres is to contribute to the development of good technologies for environmentally friendly energy and to raise the level of Norwegian expertise in this area. In addition, they should help to generate new industrial activity and new jobs. Over the next eight years, the FME-Centre ZEB will develop competitive products and solutions for existing and new buildings that will lead to market penetration of zero emission buildings related to their production, operation and demolition.
Singapore unveiled a prominent development at the National University of Singapore that is a net-zero energy building. The building, called SDE4, is located within a group of three buildings in its School of Design and Environment (SDE).[114] The design of the building achieved a Green Mark Platinum certification as it produces as much energy as it consumes with its solar panel covered rooftop and hybrid cooling system along with many integrated systems to achieve optimum energy efficiency. This development was the first new-build zero-energy building to come to fruition in Singapore, and the first zero-energy building at the NUS. The first retrofitted zero energy building to be developed in Singapore was a building at the Building and Construction Authority (BCA) academy by the Minister for National Development Mah Bow Tan at the inaugural Singapore Green Building Week on October 26, 2009.[115] Singapore's Green Building Week (SGBW) promotes sustainable development and celebrates the achievements of successfully designed sustainable buildings.[116]
A net-zero energy building unveiled more recently is the SMU Connexion (SMUC). It is the first net-zero energy building in the city that also utilizes mass engineered timber (MET). It is designed to meet the Building and Construction Authority (BCA) Green Mark Platinum certification and has been in operation since January 2020.
The Swiss MINERGIE-A-Eco label certifies zero energy buildings. The first building with this label, a single-family home, was completed in Mühleberg in 2011.[117]
![]() | This section needs to be updated. (May 2019) |
In December 2006, the government announced that by 2016 all new homes in England will be zero energy buildings. To encourage this, an exemption from Stamp Duty Land Tax is planned. In Wales the plan is for the standard to be met earlier in 2011, although it is looking more likely that the actual implementation date will be 2012. However, as a result of a unilateral change of policy published at the time of the March 2011 budget, a more limited policy is now planned which, it is estimated, will only mitigate two thirds of the emissions of a new home.[118][119]
In January 2019 the Ministry of Housing Communities and Local Government simply defined 'Zero Energy' as 'just meets current building standards' neatly solving this problem.[120]
![]() | This section needs to be updated. (September 2019) |
In the US, ZEB research is currently being supported by the US Department of Energy (DOE) Building America Program,[121] including industry-based consortia and researcher organizations at the National Renewable Energy Laboratory (NREL), the Florida Solar Energy Center (FSEC), Lawrence Berkeley National Laboratory (LBNL), and Oak Ridge National Laboratory (ORNL). From fiscal year 2008 to 2012, DOE plans to award $40 million to four Building America teams, the Building Science Corporation; IBACOS; the Consortium of Advanced Residential Buildings; and the Building Industry Research Alliance, as well as a consortium of academic and building industry leaders. The funds will be used to develop net-zero-energy homes that consume 50% to 70% less energy than conventional homes.[122]
DOE is also awarding $4.1 million to two regional building technology application centers that will accelerate the adoption of new and developing energy-efficient technologies. The two centers, located at the University of Central Florida and Washington State University, will serve 17 states, providing information and training on commercially available energy-efficient technologies.[122]
The U.S. Energy Independence and Security Act of 2007[123] created 2008 through 2012 funding for a new solar air conditioning research and development program, which should soon demonstrate multiple new technology innovations and mass production economies of scale.
The 2008 Solar America Initiative funded research and development into future development of cost-effective Zero Energy Homes in the amount of $148 million in 2008.[124][125]
The Solar Energy Tax Credits have been extended until the end of 2016.
By Executive Order 13514, U.S. President Barack Obama mandated that by 2015, 15% of existing Federal buildings conform to new energy efficiency standards and 100% of all new Federal buildings be Zero-Net-Energy by 2030.
In 2007, the philanthropic Siebel Foundation created the Energy Free Home Foundation. The goal was to offer $20 million in global incentive prizes to design and build a 2,000 square foot (186 square meter) three-bedroom, two bathroom home with (1) net-zero annual utility bills that also has (2) high market appeal, and (3) costs no more than a conventional home to construct.[126]
The plan included funding to build the top ten entries at $250,000 each, a $10 million first prize, and then a total of 100 such homes to be built and sold to the public.
Beginning in 2009, Thomas Siebel made many presentations about his Energy Free Home Challenge.[127] The Siebel Foundation Report stated that the Energy Free Home Challenge was "Launching in late 2009".[128]
The Lawrence Berkeley National Laboratory at the University of California, Berkeley participated in writing the "Feasibility of Achieving Zero-Net-Energy, Zero-Net-Cost Homes"[129] for the $20-million Energy Free Home Challenge.
If implemented, the Energy Free Home Challenge would have provided increased incentives for improved technology and consumer education about zero energy buildings coming in at the same cost as conventional housing.
The US Department of Energy Solar Decathlon is an international competition that challenges collegiate teams to design, build, and operate the most attractive, effective, and energy-efficient solar-powered house. Achieving zero net energy balance is a major focus of the competition.
![]() | This section may contain an excessive amount of intricate detail that may interest only a particular audience. (September 2019) |
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.