Loading AI tools
Sets of characters used in the 1980s & 90s From Wikipedia, the free encyclopedia
Windows code pages are sets of characters or code pages (known as character encodings in other operating systems) used in Microsoft Windows from the 1980s and 1990s. Windows code pages were gradually superseded when Unicode was implemented in Windows,[citation needed] although they are still supported both within Windows and other platforms, and still apply when Alt code shortcuts are used.
Current Windows versions support Unicode, new Windows applications should use Unicode and not 8-bit character encodings.[1]
There are two groups of system code pages in Windows systems: OEM and Windows-native ("ANSI") code pages. (ANSI is the American National Standards Institute.) Code pages in both of these groups are extended ASCII code pages. Additional code pages are supported by standard Windows conversion routines, but not used as either type of system code page.
ANSI code pages (officially called "Windows code pages"[2] after Microsoft accepted the former term being a misnomer[3]) are used for native non-Unicode (say, byte oriented) applications using a graphical user interface on Windows systems. The term "ANSI" is a misnomer because these Windows code pages do not comply with any ANSI (American National Standards Institute) standard; code page 1252 was based on an early ANSI draft that became the international standard ISO 8859-1,[3] which adds a further 32 control codes and space for 96 printable characters. Among other differences, Windows code-pages allocate printable characters to the supplementary control code space, making them at best illegible to standards-compliant operating systems.)
Most legacy "ANSI" code pages have code page numbers in the pattern 125x. However, 874 (Thai) and the East Asian multi-byte "ANSI" code pages (932, 936, 949, 950), all of which are also used as OEM code pages, are numbered to match IBM encodings, none of which are identical to the Windows encodings (although most are similar). While code page 1258 is also used as an OEM code page, it is original to Microsoft rather than an extension to an existing encoding. IBM have assigned their own, different numbers for Microsoft's variants, these are given for reference in the lists below where applicable.
All of the 125x Windows code pages, as well as 874 and 936, are labelled by Internet Assigned Numbers Authority (IANA) as "Windows-number", although "Windows-936" is treated as a synonym for "GBK". Windows code page 932 is instead labelled as "Windows-31J".[4]
ANSI Windows code pages, and especially the code page 1252, were so called since they were purportedly based on drafts submitted or intended for ANSI. However, ANSI and ISO have not standardized any of these code pages. Instead they are either:[3]
Microsoft assigned about twelve of the typography and business characters (including notably, the euro sign, €) in CP1252 to the code points 0x80–0x9F that, in ISO 8859, are assigned to C1 control codes. These assignments are also present in many other ANSI/Windows code pages at the same code-points. Windows did not use the C1 control codes, so this decision had no direct effect on Windows users. However, if included in a file transferred to a standards-compliant platform like Unix or MacOS, the information was invisible and potentially disruptive.[citation needed]
The OEM code pages (original equipment manufacturer) are used by Win32 console applications, and by virtual DOS, and can be considered a holdover from DOS and the original IBM PC architecture. A separate suite of code pages was implemented not only due to compatibility, but also because the fonts of VGA (and descendant) hardware suggest encoding of line-drawing characters to be compatible with code page 437. Most OEM code pages share many code points, particularly for non-letter characters, with the second (non-ASCII) half of CP437.
A typical OEM code page, in its second half, does not resemble any ANSI/Windows code page even roughly. Nevertheless, two single-byte, fixed-width code pages (874 for Thai and 1258 for Vietnamese) and four multibyte CJK code pages (932, 936, 949, 950) are used as both OEM and ANSI code pages. Code page 1258 uses combining diacritics, as Vietnamese requires more than 128 letter-diacritic combinations. This is in contrast to VISCII, which replaces some of the C0 (i.e. ASCII) control codes.
Initially, computer systems and system programming languages did not make a distinction between characters and bytes: for the segmental scripts used in most of Africa, the Americas, southern and south-east Asia, the Middle East and Europe, a character needs just one byte, but two or more bytes are needed for the ideographic sets used in the rest of the world. This subsequently led to much confusion. Microsoft software and systems prior to the Windows NT line are examples of this, because they use the OEM and ANSI code pages that do not make the distinction.
Since the late 1990s, software and systems have adopted Unicode as their preferred storage format; this trend has been improved by the widespread adoption of XML which default to UTF-8 but also provides a mechanism for labelling the encoding used.[5] All current Microsoft products and application program interfaces use Unicode internally,[citation needed] but some applications continue to use the default encoding of the computer's 'locale' when reading and writing text data to files or standard output.[citation needed] Therefore, files may still be encountered that are legible and intelligible in one part of the world but unintelligible mojibake in another.
Microsoft adopted a Unicode encoding (first the now-obsolete UCS-2, which was then Unicode's only encoding), i.e. UTF-16 for all its operating systems from Windows NT onwards, but additionally supports UTF-8 (aka CP_UTF8
) since Windows 10 version 1803.[6]
UTF-16 uniquely encodes all Unicode characters in the Basic Multilingual Plane (BMP) using 16 bits but the remaining Unicode (e.g. emojis) is encoded with a 32-bit (four byte) code – while the rest of the industry (Unix-like systems and the web), and now Microsoft chose UTF-8 (which uses one byte for the 7-bit ASCII character set, two or three bytes for other characters in the BMP, and four bytes for the remainder).
![]() |
The following Windows code pages exist:
These nine code pages are all extended ASCII 8-bit SBCS encodings, and were designed by Microsoft for use as ANSI codepages on Windows. They are commonly known by their IANA-registered[7] names as windows-<number>
, but are also sometimes called cp<number>
, "cp" for "code page". They are all used as ANSI code pages; Windows-1258 is also used as an OEM code page.
The Windows-125x series includes nine of the ANSI code pages, and mostly covers scripts from Europe and West Asia with the addition of Vietnam. System encodings for Thai and for East Asian languages were numbered to match similar IBM code pages and are used as both ANSI and OEM code pages; these are covered in following sections.
ID | Description | Relationship to ISO 8859 or other established encodings |
---|---|---|
1250[8][9] | Latin 2 / Central European | Similar to ISO-8859-2 but moves several characters, including multiple letters. |
1251[10][11] | Cyrillic | Incompatible with both ISO-8859-5 and KOI-8. |
1252[12][13] | Latin 1 / Western European | Superset of ISO-8859-1 (without C1 controls). Letter repertoire accordingly similar to CP850. |
1253[14][15] | Greek | Similar to ISO 8859-7 but moves several characters, including a letter. |
1254[16][17] | Turkish | Superset of ISO 8859-9 (without C1 controls). |
1255[18][19] | Hebrew | Almost a superset of ISO 8859-8, but with two incompatible punctuation changes. |
1256[20][21] | Arabic | Not compatible with ISO 8859-6; rather, OEM Code page 708 is an ISO 8859-6 (ASMO 708) superset. |
1257[22][23] | Baltic | Not ISO 8859-4; the later ISO 8859-13 is closely related, but with some differences in available punctuation. |
1258[24][25] | Vietnamese (also OEM) | Not related to VSCII or VISCII, uses fewer base characters with combining diacritics. |
These are also ASCII-based. Most of these are included for use as OEM code pages; code page 874 is also used as an ANSI code page.
These often differ from the IBM code pages of the same number: code pages 932, 949 and 950 only partly match the IBM code pages of the same number, while the number 936 was used by IBM for another Simplified Chinese encoding which is now deprecated and Windows-951, as part of a kludge, is unrelated to IBM-951. IBM equivalent code pages are given in the second column. Code pages 932, 936, 949 and 950/951 are used as both ANSI and OEM code pages on the locales in question.
ID | Language | Encoding | IBM Equivalent | Difference from IBM CCSID of same number | Use |
---|---|---|---|---|---|
932 | Japanese | Shift JIS (Microsoft variant) | 943[27] | IBM-932 is also Shift JIS, has fewer extensions (but those extensions it has are in common), and swaps some variant Chinese characters (itaiji) for interoperability with earlier editions of JIS C 6226. | ANSI/OEM (Japan) |
936 | Chinese (simplified) | GBK | 1386 | IBM-936 is a different Simplified Chinese encoding with a different encoding method, which has been deprecated since 1993. | ANSI/OEM (PRC, Singapore) |
949 | Korean | Unified Hangul Code | 1363 | IBM-949 is also an EUC-KR superset, but with different (colliding) extensions. | ANSI/OEM (Republic of Korea) |
950 | Chinese (traditional) | Big5 (Microsoft variant) | 1373[28] | IBM-950 is also Big5, but includes a different subset of the ETEN extensions, adds further extensions with an expanded trail byte range, and lacks the Euro. | ANSI/OEM (Taiwan, Hong Kong) |
951 | Chinese (traditional) including Cantonese | Big5-HKSCS (2001 ed.) | 5471[29] | IBM-951 is the double-byte plane from IBM-949 (see above), and unrelated to Microsoft's internal use of the number 951. | ANSI/OEM (Hong Kong, 98/NT4/2000/XP with HKSCS patch) |
A few further multiple-byte code pages are supported for decoding or encoding using operating system libraries, but not used as either sort of system encoding in any locale.
ID | IBM Equivalent | Language | Encoding | Use |
---|---|---|---|---|
1361 | - | Korean | Johab (KS C 5601-1992 annex 3) | Conversion |
20000 | - | Chinese (traditional) | An encoding of CNS 11643 | Conversion |
20001 | - | Chinese (traditional) | TCA | Conversion |
20002 | - | Chinese (traditional) | Big5 (ETEN variant) | Conversion |
20003 | 938 | Chinese (traditional) | IBM 5550 | Conversion |
20004 | - | Chinese (traditional) | Teletext | Conversion |
20005 | - | Chinese (traditional) | Wang | Conversion |
20932 | 954 (roughly) | Japanese | EUC-JP | Conversion |
20936 | 5479 | Chinese (simplified) | GB 2312 | Conversion |
20949, 51949 | 970 | Korean | Wansung (8-bit with ASCII, i.e. EUC-KR)[30] | Conversion |
ID | IBM Equivalent | Description |
---|---|---|
37 | Country Extended Code Page for US, Canada, Netherlands, Portugal, Brazil, Australia, New Zealand[31] | |
500 | Country Extended Code Page for Belgium, Canada and Switzerland | |
870 | EBCDIC Latin-2 | |
875 | EBCDIC Greek | |
1026 | EBCDIC Latin-5 (Turkish) | |
1047 | Country Extended Code Page for Open Systems (POSIX) | |
1140 | Euro-sign Country Extended Code Page for US, Canada, Netherlands, Portugal, Brazil, Australia, New Zealand | |
1141 | Euro-sign Country Extended Code Page for Austria and Germany | |
1142 | Euro-sign Country Extended Code Page for Denmark and Norway | |
1143 | Euro-sign Country Extended Code Page for Finland and Sweden | |
1144 | Euro-sign Country Extended Code Page for Italy | |
1145 | Euro-sign Country Extended Code Page for Spain and Latin America | |
1146 | Euro-sign Country Extended Code Page for UK | |
1147 | Euro-sign Country Extended Code Page for France | |
1148 | Euro-sign Country Extended Code Page for Belgium, Canada and Switzerland | |
1149 | Euro-sign Country Extended Code Page for Iceland | |
20273 | 273 | Country Extended Code Page for Germany |
20277 | 277 | Country Extended Code Page for Denmark/Norway |
20278 | 278 | Country Extended Code Page for Finland/Sweden |
20280 | 280 | Country Extended Code Page for Italy |
20284 | 284 | Country Extended Code Page for Latin America/Spain |
20285 | 285 | Country Extended Code Page for United Kingdom |
20290 | 290 | Japanese Katakana EBCDIC |
20297 | 297 | Country Extended Code Page for France |
20420 | 420 | EBCDIC Arabic |
20423 | 423 | EBCDIC Greek with Extended Latin |
20424 | - | x-EBCDIC-KoreanExtended |
20833 | 833 | Korean EBCDIC for N-Byte Hangul |
20838 | 838 | EBCDIC Thai |
20871 | 871 | Country Extended Code Page for Iceland |
20880 | 880 | EBCDIC Cyrillic (DKOI) |
20905 | 905 | EBCDIC Latin-3 (Maltese, Esperanto and Turkish) |
20924 | 924 | EBCDIC Latin-9 (including Euro sign) for Open Systems (POSIX) |
21025 | 1025 | EBCDIC Cyrillic (DKOI) with section sign |
21027 | (1027) | Japanese EBCDIC (an incomplete implementation of IBM code page 1027,[32] now deprecated)[33] |
ID | IBM Equivalent | Description |
---|---|---|
1200 | 1202, 1203 | Unicode (BMP of ISO 10646, UTF-16LE). Available only to managed applications.[33] |
1201 | 1200, 1201 | Unicode (UTF-16BE). Available only to managed applications.[33] |
12000 | 1234, 1235 | UTF-32. Available only to managed applications.[33] |
12001 | 1232, 1233 | UTF-32. Big-endian. Available only to managed applications.[33] |
65000 | - | Unicode (UTF-7) |
65001 | 1208, 1209 | Unicode (UTF-8) |
ID | IBM Equivalent | Description |
---|---|---|
10000 | 1275 | Apple Macintosh Roman |
10001 | - | Apple Macintosh Japanese |
10002 | - | Apple Macintosh Chinese (traditional) (BIG-5) |
10003 | - | Apple Macintosh Korean |
10004 | - | Apple Macintosh Arabic |
10005 | - | Apple Macintosh Hebrew |
10006 | 1280 | Apple Macintosh Greek |
10007 | 1283 | Apple Macintosh Cyrillic |
10008 | - | Apple Macintosh Chinese (simplified) (GB 2312) |
10010 | 1285 | Apple Macintosh Romanian |
10017 | - | Apple Macintosh Ukrainian |
10021 | - | Apple Macintosh Thai |
10029 | 1282 | Apple Macintosh Roman II / Central Europe |
10079 | 1286 | Apple Macintosh Icelandic |
10081 | 1281 | Apple Macintosh Turkish |
10082 | 1284 | Apple Macintosh Croatian |
ID | IBM Equivalent | Description |
---|---|---|
28591 | 819, 5100 | ISO-8859-1 – Latin-1 |
28592 | 912 | ISO-8859-2 – Latin-2 |
28593 | 913 | ISO-8859-3 – Latin-3 or South European |
28594 | 914 | ISO-8859-4 – Latin-4 or North European |
28595 | 915 | ISO-8859-5 – Latin/Cyrillic |
28596 | - | ISO-8859-6 – Latin/Arabic |
28597 | 813, 4909, 9005 | ISO-8859-7 – Latin/Greek (1987 edition, i.e. without euro sign, drachma sign or iota subscript)[34] |
28598 | - | ISO-8859-8 – Latin/Hebrew (visual order; 1988 edition, i.e. without LRM and RLM)[34] |
28599 | 920 | ISO-8859-9 – Latin-5 or Turkish |
28600 | 919 | ISO-8859-10 – Latin-6 or Nordic |
28601 | - | ISO-8859-11 – Latin/Thai |
28602 | - | ISO-8859-12 – reserved for Latin/Devanagari but abandoned (not supported) |
28603 | 921 | ISO-8859-13 – Latin-7 or Baltic Rim |
28604 | - | ISO-8859-14 – Latin-8 or Celtic |
28605 | 923 | ISO-8859-15 – Latin-9 |
28606 | - | ISO-8859-16 – Latin-10 or South-Eastern European |
38596 | 1089 | ISO-8859-6-I – Latin/Arabic (logical bidirectional order) |
38598 | 916, 5012 | ISO-8859-8-I – Latin/Hebrew (logical bidirectional order; 1988 edition, i.e. without LRM and RLM)[34] |
ID | IBM Equivalent | Description |
---|---|---|
20105 | 1009 | 7-bit IA5 IRV (Western European)[35][36][37] |
20106 | 1011 | 7-bit IA5 German (DIN 66003)[35][36][38] |
20107 | 1018 | 7-bit IA5 Swedish (SEN 850200 C)[35][36][39] |
20108 | 1016 | 7-bit IA5 Norwegian (NS 4551-2)[35][36][40] |
20127 | 367 | 7-bit ASCII[35][36][41] |
20261 | 1036 | T.61 (T.61-8bit) |
20269 | ? | ISO-6937 |
Microsoft strongly recommends using Unicode in modern applications, but many applications or data files still depend on the legacy code pages.
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.