Vacuum coffee maker

A vacuum coffee maker brews coffee using two chambers where vapor pressure and gravity produce coffee. This type of coffee maker is also known as vac pot, siphon or syphon coffee maker, and was invented by Loeff of Berlin in the 1830s. These devices have since been used for more than a century in many parts of the world.^[1] Design and composition of the vacuum coffee maker varies. The chamber material is borosilicate glass, metal, or plastic, and the filter can be either a glass rod or a screen made of metal, cloth, paper, or nylon. The Napier Vacuum Machine by James Robert Napier, presented in 1840, was an early example of this technique.^[2] While vacuum coffee makers generally were excessively complex for everyday use, they were prized for producing a clear brew, and were quite popular until the middle of the twentieth century. Vacuum coffee makers remain popular in some parts of Asia, including Japan and Taiwan.^[3] The Bauhaus interpretation of this device can be seen in Gerhard Marcks' Sintrax [de] coffee maker of 1925.^[4][5]

A vacuum coffee maker. Industrial design-classic by Abram Games.

Workings

Vacuum pot coffee brewer: vapor pressure forces the water into the upper chamber.

As temperature increases, the vapor pressure of water increases, increasing the pressure in the bottom vessel and pushing water up the siphon. At the normal boiling point of 100 °C, the vapor pressure equals the standard atmospheric pressure of 760 Torr (760 mm of mercury).

See also: Siphon § Siphon coffee

A vacuum coffee maker operates as a siphon, where heating and cooling the lower vessel changes the vapor pressure of water in the lower, first pushing the water up into the upper vessel, then allowing the water to fall back down into the lower vessel.

Specifically, once the water in lower chamber is hot enough that its vapor pressure (the pressure exerted by the vapour component of a liquid) exceeds the pressure of a standard atmosphere, some of it begins to boil, turning into water vapor. Since the density of water vapor is about 1/2000 that of liquid water, the mixture of the air and water vapor in the lower chamber quickly expands, and, when the new pressure exceeds atmospheric pressure, pushes the remaining water up the siphon tube into the upper chamber, where it remains so long as the pressure difference between the upper and lower chambers is sufficient to support it (about 1.5 kPa or 0.015 atm). This pressure difference is maintained during brewing through the continuous heating of the lower chamber. Coffee grinds are added to the water in the upper chamber.

When the coffee has finished brewing, the heat is removed and the pressure in the bottom vessel drops, so the combined force of gravity and atmospheric pressure overcomes the pressure of the bottom chamber, causing the brewed coffee to be pulled into the bottom chamber of the vacuum coffee maker, leaving the coffee grounds in the top chamber.^[6]

The iconic Moka pot coffee maker functions on the same principle but the water is forced up from the bottom chamber through the third middle chamber containing the coffee grounds to the top chamber which has an air gap to prevent the brewed coffee from returning downwards. (Additionally, because the water is forced up through packed grounds, the pressures are greater.) The prepared coffee is then poured off from the top.

Balance siphon

An early variation of this principle is called a balance siphon. This implementation has the two chambers arranged side by side on a balance-like device, with a counterweight attached to the heated chamber. ^{[citation needed]} Once the vapor has forced the hot water out, the counterweight activates a spring-loaded snuffer which smothers the flame and allows the initial chamber to cool down thus lowering pressure (creating a vacuum) and causing the brewed coffee to seep in.

Automated version

In 2022, Japanese Tiger Corporation was working on an automated coffee-maker based on the vacuum coffee maker principle, the Siphonysta.^[7] The Siphonysta's heating is electrical. The chambers are made of plastic ("resin").

Gallery of process

• 
  Step 1: Water is heated to a boil in the glass carafe.
• 
  Step 2: Coffee grounds are prepared and placed in glass container.
• 
  Step 3: The stem of the coffee ground container is inserted into the top of the glass carafe while the water continues to boil.
• 
  Step 4: The steam forces hot water up the stem of the coffee ground container and mixes with the ground coffee. The mix is then stirred for one minute.
• 
  Step 5: At this point, the coffee has been fully brewed, but still contains the coffee grounds. The glass carafe is taken off the heated surface.
• 
  Step 6: As the glass carafe cools and the evaporated water contracts, the brewed coffee is pulled through the filter of the coffee ground container (by gravity and pressure difference) down into the glass carafe.
• 
  Step 7: The brewed coffee is finished, and located in the glass carafe. The glass coffee ground container contains grounds, which are drier (relative to filtered coffee grounds) due to the siphon also pushing air over the grounds.

See also

• Coffee portal
• Minto wheel
• Bodum, makers of the Santos, Pebo and ePebo vacuum coffee makers

References

1. Baharris: history
2. The Napier Vacuum Machine
3. Eckhardt, Robyn (2009-11-06). "Ground Rules". Wall Street Journal. ISSN 0099-9660. Retrieved 2020-01-11.
4. Sintrax Coffee Maker, Jenaer Glaswerk
5. Sintrax Coffee Maker
6. Prince, Mark (2021-03-22). "How to use a Siphon Coffee Maker". coffeegeek. Retrieved 2023-11-22.
7. "Siphonysta Official Site". Tiger Corporation U.S.A. Retrieved 2022-04-25.

External links

• Vac Pot How-To pdf
• Siphon brewer in operation, Sydney Australia