Balaklava–Moonta railway line

Former railway line in South Australia From Wikipedia, the free encyclopedia

Balaklava–Moonta railway linemap

The Balaklava–Moonta railway line was a railway line on the South Australian Railways network. It ran across the top of the Yorke Peninsula.

Quick Facts Overview, Status ...
Balaklava–Moonta railway line
Moonta railway station, the original terminus of the line, ( 2016 )
Overview
StatusClosed and Removed
LocaleYorke Peninsula, South Australia
Coordinates34°02′46.0″S 137°55′55.9″E
Termini
Continues fromHamley Bridge-Gladstone line
Service
SystemSouth Australian Railways
Operator(s)South Australian Railways
Australian National
History
OpenedBalaklava-Port Wakefield: 14 March 1876
Port Wakefield-Kadina: 9 October 1878
Kadina-Wallaroo: 15 January 1880
Wallaroo-Moonta: 2 November 1891
ClosedBalaklava-Paskeville: 4 April 1984
Wallaroo-Moonta: 23 July 1984
Paskeville-Kadina:14 March 1990
Kadina-Wallaroo: 3 March 1993
Technical
Line length109.4 km (68.0 mi)
Track gauge1,435 mm (4 ft 8+12 in)
1,600 mm (5 ft 3 in)
Old gauge1,067 mm (3 ft 6 in)
Route map

Balaklava
Saints
Bowmans
Port Wakefield
South Hummocks
Melton
Paskeville
Green's Plains
Kadina
Wallaroo Mines
Wallaroo
Parramatta
Cross Roads
Yelta
Moonta

[1]
Close

History

Summarize
Perspective

The first part to be built was a horse-drawn tramway between the port at Wallaroo and mines near Kadina in 1862, followed by mines near Moonta in 1866. This was originally constructed as 5 ft 3 in (1,600 mm) gauge.

A separate isolated horse-drawn tramway[2] was constructed to deliver grain from the plains east of Port Wakefield in the areas of Balaklava, Halbury and Hoyle's Plains (now Hoyleton) to that port. It opened in 1869.[3] The section from Hoyleton to Balaklava eventually became part of the Hamley Bridge-Gladstone railway line when that line reached Gladstone in 1894.

The 3 ft 6 in (1,067 mm) gauge line from Port Wakefield reached a new junction with the Kadina–Brinkworth railway line at Kadina and opened on 9 October 1878. It continued to Wallaroo on a new track adjacent to the older broad gauge track.[4] The line from Kadina to Barunga Gap had started construction from the Kadina end in 1877[5]

On 1 August 1927, the line was converted from 3 ft 6 in (1,067 mm) to 5 ft 3 in (1,600 mm) broad gauge.[6] A junction at Kadina connected to the Kadina–Brinkworth railway line. The section from Kadina to Wallaroo was converted to dual gauge broad and standard gauges on 2 December 1982 after the Adelaide–Port Augusta railway line was converted to standard gauge.

Following the conversion of the Adelaide-Port Augusta railway line to standard gauge in 1982, the broad gauge line from from Balaklava to Paskeville was no longer required and closed on 4 April 1984. [7] The Wallaroo to Moonta section on 23 July 1984. The broad gauge section from Kadina to Wallaroo also closed on 23 July 1984, but the standard gauge line remained open until 3 March 1993. The Paskeville to Kadina section closed on 14 March 1990.[8] After the closure of the railways, part of the line was used by the Lions Club of Yorke Peninsula Railway for heritage tourist services, but the operations stopped in 2009.

The line between Wallaroo and Kadina has since been pulled up and replaced with the Copper Coast Rail Trail and retail stores on both ends.[9]

References

Wikiwand in your browser!

Seamless Wikipedia browsing. On steroids.

Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.

Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.