Assault rifle (SS2) From Wikipedia, the free encyclopedia
The SS2 (short for Senapan Serbu 2, lit. 'Assault Rifle 2') is a replacement for the Pindad SS1 created by Pindad.[6] It had been seen during the ASEAN Army Rifles contest by foreign media in 2006[7] aside from exposure by local Indonesian media.
Pindad SS2 | |
---|---|
Type | Assault rifle (SS2) Designated marksman rifle (SS3) |
Place of origin | Indonesia |
Service history | |
In service | 2006–present |
Used by | See Users |
Wars | Insurgency in Aceh Papua conflict Operation Madago Raya |
Production history | |
Manufacturer | Pindad |
Unit cost | Rp 4,911,590 (US$500, 2005)[1] |
Produced | 2005–present |
No. built | 40,000 (Annually)[2] |
Variants | See Variants |
Specifications | |
Mass | Without magazine: |
Length |
|
Barrel length |
|
Cartridge | 5.56×45mm NATO (SS2/SPM-1) 7.62×51mm NATO (SS3) |
Action | Gas-Operated, long stroke piston, rotating bolt |
Rate of fire | 720-760 rpm |
Effective firing range | 150-600 m (depends on variants) |
Feed system | Various STANAG magazines. |
Sights | Iron sights, but optical sights are possible with the Picatinny rail provision. Optical sight is a standard feature in SS2-V4 variant. |
References | [5] |
The SS2 assault rifles are currently being brought into service with the Indonesian military and police. They will gradually replace the SS1 assault rifles which have been in service with the security forces since the 1990s.
The SS2 was first ordered by the Indonesian military in 2002[8] and in 2003.[8] It had then been announced that the rifle was launched in 2005[9][10] 150 SS2-V4s were purchased in 2007.[11] A SS2 with a solid stock, known as the SS2-V3 would have been produced by Pindad, but was rejected.[12]
The Indonesian Army placed an order of 15,000 SS2s to replace their stock of SS1s back in 2005[9] with an additional order of 10,000 SS2s in 2006.[13][14] Its first combat use was with Indonesian troops armed with SS2s in Aceh.[15]
The SS2s were shown abroad in Malaysia during the Defences Services Asia Exhibition and Conference 2010.[16]
Both Brunei and Iraq have expressed recent interest in purchasing SS2s for their militaries.[17][18] Myanmar has expressed interest in purchasing SS2 rifles despite a statement from Indonesian Foreign Minister Marty Natalegawa that it was not true.[19] Col. Jan Pieter Ate of the Indonesian Defense Ministry expressed his concerns that SS2 rifles can be used to threaten other countries and civilians while University of Indonesia security analyst Andi Widjajanto said that selling the rifles to the country can help improve relations while allowing the black market to lose its presence there.[20]
Pindad plans to market the weapon to third world countries such as the Congo, Iran and Uganda.[21] On June 1, 2018, Pindad announced that it has entered into a partnership with Bhukhanvala Industries to market the SS2 to Indian military and law enforcement agencies.[22]
Brunei announced in 2018 that plans to purchase the SS2 will finally push through after informal talks started in 2015.[23]
According to Pindad representatives, around 40,000 SS2s are made annually.[2] SS2 has a local content between 51.31% (SS2-V5 A1) to 78.04% (SS2-V5).[24]
On 7 November 2022, the Deputy Commander of the Royal Cambodian Army expressed interest in the SS2 rifles.[25] On 6 June 2024, Indonesian Government approved the military assistance to Cambodia in the form of 150 Pindad SS2-V5-A1 rifles and 20 Pindad G2 Elite pistols, with its ammunition.[26] The military assistance was delivered and received by the Vice Commander of RCAF and Commander of the Royal Cambodian Army on 29 August 2024.[27][28][29]
The SS2 is an upgrade of the Pindad SS1, being a licensed version of the FN FNC. The SS2's flash suppressor is based on that of the Colt M16A2, and it has a reciprocating charging handle that can be used for forward assist, with the front sight being based on the AK rifles.[30][31]
The carrying handle and detachable rear sight on top of the Picatinny rail can be removed in order to install various optics.[30][31]
The rifle's front handguard is ribbed, with cuts for thermal ventilation.[31] This design improves barrel cooling in situations where sustained fire is necessary.[31] The SS2's barrels were originally produced in Germany before Pindad switched to South Korean-made barrels due to issues with an arms embargo at the time.[30]
The charging handle is on the right side of the SS2 with the fire/safety selector on the left side with provision for single and full auto fire alongside safe mode.[32] Upper and lower receivers are made from aluminium alloy and are connected via cross pins.[32]
A new rifle based on the SS1, being replaced in the Indonesian military after tests had been conducted from 2003 to 2005. It has been adopted by Indonesian security forces in 2006.[33] It has a carrying handle that can be replaced with a scope for scope mounting on a Picatinny rail and a side-folding stock.[10]
A sub-variant of the SS2-V1 with a heavy barrel.[34]
A sub-variant of the SS2-V1 with Picatinny rail handguard and foldable-telescoping stock (optional), frequently seen side-folding stock.[35]
A carbine version of the SS2-V1.[32]
A sub-variant of the SS2-V2 with a heavy barrel.[34]
A sub-variant of the SS2-V2 with new foldable-telescoping stock, new pistol grip and Picatinny rail handguard.
Instead of having the usual side-folding stock, the stock for the SS2-V3 was replaced with a fixed one for experimental purposes. The result was very unsatisfying, and so the project for SS2-V3 got abandoned and was never mass-produced.
Carrying handle replaced with a Picatinny rail for scope mounting as a designated marksman rifle. Said to be for the use of Indonesian special forces. The front sight has been removed and the barrel lengthened and accurised to improve accuracy.[36]
A sub-variant of the SS2-V4 with a heavy barrel, accurate out to 600 meters.[37]
A sub-variant of the SS2-V4 with new foldable-telescoping stock, new pistol grip and Picatinny rail handguard.[38][39]
A compact version of the SS2-V1.[32] Unveiled at the Indo Defence & Aerospace exhibition in 2008.[32][40]
A sub-variant of the SS2-V5, with new picatinny rail handguard, new pistol grip and foldable-telescoping stock.[34]
These were publicly unveiled in 2012.[41]
These are ordered for Mobile Brigade Corps (Brimob), Army Strategic Reserve Command (Kostrad) and also for Armed Forces Reserve Component (Komcad).[42][43] The Army's 411th Mechanized Infantry Battalion received 67 SS2-V5 A1s in January 2021.[44]
A sub-variant of the SS2-V5 with M4-style stock, these are ordered for Kopassus forces.[41] These were publicly unveiled in 2012.[41]
Launched in May 2016, the SS2-V7 is a subsonic variant intended to be used in special forces operations when stealth is required through the use of a mounted suppressor.[45] Due to security concerns, there are no plans to market it overseas.[45] It was officially revealed to the press in a public event sponsored by the Indonesian Ministry of Defense on June 9, 2016.[2]
It can be used for up to 150 meters. SS2-V7 uses its own subsonic round.[2] According to Pindad, it's much quieter than the MP7 when fired.[45] This variant equipped with an ACOG sight in the sales package.[34]
A 7.62 mm version of the in-service Pindad SS2 assault rifle. Pindad designed the SS3 as a designated marksman rifle for use in assault teams that require a high level of accuracy. The SS3 was exhibited at Indo Defence 2016.[2]
A designated marksman rifle version, the SPM-1 (short for Indonesian: "Senapan Penembak Mahir 1") uses a gas acting system with a caliber of 5.56 x 45 mm NATO, and a barrel length of 500 mm. The DMR SPM-1 has a longer size, which is 1026 mm when the stock is stretched and 782 mm when the butt is folded.[46][47]
A variant of the SS2 made for maritime operations, chambered in MU5-BA ammo.[48] The SSA can be chambered in regular 5.56 NATO when used in non-maritime environment. Development of the SSA was based on the SS2-V4 HB.[49] The rifle was unveiled in the Indo Defence 2022 exhibition.[50]
The SSA was also marketed for United States civilian firearms market. The civilian variant was offered in semi-automatic only and without a stock to comply with United States foreign firearms import restrictions.[51] It was unveiled at the SHOT Show 2024.[52]
A semi-automatic only variant of SS2 chambered in 7.62×51mm NATO for dopper training use. Dopper training consists of firing live rounds at the ground around soldiers or law enforcement operators while they crawl in a muddy environment. To avoid the projectile shattering or ricocheting when it impacts the ground, a proprietary round-nosed 7.62×51mm bullet was developed for use with the rifle. The rifle could also use regular 7.62mm bullet for combat use. The rifle weights around 4.6–5 kg, has a barrel length of 510 mm (20.1 in) and overall length of 908 mm (35.7 in).[53][54]
Seamless Wikipedia browsing. On steroids.