AI tools

Phenylhydrazine

Chemical compound From Wikipedia, the free encyclopedia

Phenylhydrazine is the chemical compound with the formula C6H5NHNH2. It is often abbreviated as PhNHNH2. It is also found in edible mushrooms.[5]

Quick Facts Names, Identifiers ...
Phenylhydrazine[1][2]
Thumb
Phenylhydrazine
Thumb
Ball-and-stick model of phenylhydrazine
Thumb
Space-filling model of phenylhydrazine
Names
Preferred IUPAC name
Phenylhydrazine
Other names
Hydrazinobenzene
Identifiers
3D model (JSmol)
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.002.612
KEGG
UNII
  • InChI=1S/C6H8N2/c7-8-6-4-2-1-3-5-6/h1-5,8H,7H2 Y
    Key: HKOOXMFOFWEVGF-UHFFFAOYSA-N Y
  • InChI=1/C6H8N2/c7-8-6-4-2-1-3-5-6/h1-5,8H,7H2
    Key: HKOOXMFOFWEVGF-UHFFFAOYAN
  • NNc1ccccc1
Properties
C6H5NHNH2
Molar mass 108.144 g·mol−1
Appearance Colorless to pale-yellow liquid or solid[3]
Odor faint, aromatic[3]
Density 1.0978 g/cm3
Melting point 19.5 °C (67.1 °F; 292.6 K) (24 °C for hemihydrate)
Boiling point 243.5 °C (470.3 °F; 516.6 K) (decomposition)
Vapor pressure 0.04 mmHg (25°C)[3]
-67.82·10−6 cm3/mol
Hazards
NFPA 704 (fire diamond)
ThumbHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelInstability 3: Capable of detonation or explosive decomposition but requires a strong initiating source, must be heated under confinement before initiation, reacts explosively with water, or will detonate if severely shocked. E.g. hydrogen peroxideSpecial hazards (white): no code
3
2
3
Flash point 88 °C; 190 °F; 361 K[3]
Lethal dose or concentration (LD, LC):
  • 188 mg/kg (rat, oral)
  • 175 mg/kg (mouse, oral)
  • 80 mg/kg (rabbit, oral)
  • 80 mg/kg (guinea pig, oral)
  • 200-250 mg/kg (dog, oral)
[4]
NIOSH (US health exposure limits):
PEL (Permissible)
 TWA 5 ppm (22 mg/m3) [skin][3]
REL (Recommended)
 Ca C 0.14 ppm (0.6 mg/m3) [2-hr] [skin][3]
IDLH (Immediate danger)
 Ca [15 ppm][3]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Close

Properties

Phenylhydrazine forms monoclinic prisms that melt to an oil around room temperature which may turn yellow to dark red upon exposure to air.[1] Phenylhydrazine is miscible with ethanol, diethyl ether, chloroform and benzene. It is sparingly soluble in water.

Preparation

Phenylhydrazine is prepared by reacting aniline with sodium nitrite in the presence of hydrogen chloride to form the diazonium salt, which is subsequently reduced using sodium sulfite in the presence of sodium hydroxide to form the final product.[6]

History

Phenylhydrazine was the first hydrazine derivative characterized, reported by Hermann Emil Fischer in 1875.[7][8] He prepared it by reduction of a phenyl diazonium salt using sulfite salts. Fischer used phenylhydrazine to characterize sugars via formation of hydrazones known as osazones with the sugar aldehyde. He also demonstrated in this first paper many of the key properties recognized for hydrazines.

Uses

Phenylhydrazine is used to prepare indoles by the Fischer indole synthesis, which are intermediates in the synthesis of various dyes and pharmaceuticals.

Phenylhydrazine is used to form phenylhydrazones of natural mixtures of simple sugars in order to render the differing sugars easily separable from each other.[9]

This molecule is also used to induce acute hemolytic anemia in animal models.

Safety

Exposure to phenylhydrazine may cause contact dermatitis, hemolytic anemia, and liver damage.[1]

References

External links

Wikiwand - on

Seamless Wikipedia browsing. On steroids.