Ozone

For other uses, see Ozone (disambiguation).

"Oxygen 3" redirects here. For the Jean-Michel Jarre album, see Oxygène 3.

Ozone (/ˈoʊzoʊn/) (or trioxygen) is an inorganic molecule with the chemical formula O
₃. It is a pale blue gas with a distinctively pungent smell. It is an allotrope of oxygen that is much less stable than the diatomic allotrope O
₂, breaking down in the lower atmosphere to O
₂ (dioxygen). Ozone is formed from dioxygen by the action of ultraviolet (UV) light and electrical discharges within the Earth's atmosphere. It is present in very low concentrations throughout the atmosphere, with its highest concentration high in the ozone layer of the stratosphere, which absorbs most of the Sun's ultraviolet (UV) radiation.

Ozone

Ball and stick model of ozone Spacefill model of ozone
Names
IUPAC name Ozone
Systematic IUPAC name Trioxygen
Other names 2λ4-trioxidiene; catena-trioxygen
Identifiers
CAS Number	10028-15-6 Y
3D model (JSmol)	Interactive image
ChEBI	CHEBI:25812 Y
ChemSpider	23208 Y
ECHA InfoCard	100.030.051
EC Number	233–069–2
Gmelin Reference	1101
IUPHAR/BPS	6297
MeSH	Ozone
PubChem CID	24823
RTECS number	RS8225000
UNII	66H7ZZK23N Y
CompTox Dashboard (EPA)	DTXSID0021098
InChI InChI=1S/O3/c1-3-2 Y Key: CBENFWSGALASAD-UHFFFAOYSA-N Y InChI=1/O3/c1-3-2 Key: CBENFWSGALASAD-UHFFFAOYAY
SMILES [O-][O+]=O
Properties
Chemical formula	O3
Molar mass	47.997 g·mol−1
Appearance	Colourless to pale blue gas[1]
Odor	Pungent[1]
Density	2.144 g/L (at 0 °C)
Melting point	−192.2 °C; −313.9 °F; 81.0 K
Boiling point	−112 °C; −170 °F; 161 K
Solubility in water	1.05 g L−1 (at 0 °C)
Solubility in other solvents	Very soluble in CCl4, sulfuric acid
Vapor pressure	55.7 atm[2] (−12.15 °C or 10.13 °F or 261.00 K)[a]
Conjugate acid	Protonated ozone
Magnetic susceptibility (χ)	+6.7·10−6 cm3/mol
Refractive index (nD)	1.2226 (liquid), 1.00052 (gas, STP, 546 nm—note high dispersion)[3]
Structure
Space group	C2v
Coordination geometry	Digonal
Molecular shape	Dihedral
Hybridisation	sp2 for O1
Dipole moment	0.53 D
Thermochemistry
Std molar entropy (S⦵298)	238.92 J K−1 mol−1
Std enthalpy of formation (ΔfH⦵298)	142.67 kJ mol−1
Hazards
GHS labelling:
Pictograms
Signal word	Danger
Hazard statements	H270, H314, H330, H335, H341, H361, H370, H410
Precautionary statements	P203, P220, P244, P260, P264+P265, P270, P271, P273, P280, P284, P301+P330+P331, P302+P361+P354, P304+P340, P305+P351+P338, P308+P316, P362+P364, P370+P376, P391, P403+P233, P405
NFPA 704 (fire diamond)	4 0 4 OX
Lethal dose or concentration (LD, LC):
LCLo (lowest published)	12.6 ppm (mouse, 3 hr) 50 ppm (human, 30 min) 36 ppm (rabbit, 3 hr) 21 ppm (mouse, 3 hr) 21.8 ppm (rat, 3 hr) 24.8 ppm (guinea pig, 3 hr) 4.8 ppm (rat, 4 hr)[4]
NIOSH (US health exposure limits):
PEL (Permissible)	TWA 0.1 ppm (0.2 mg/m3)[1]
REL (Recommended)	C 0.1 ppm (0.2 mg/m3)[1]
IDLH (Immediate danger)	5 ppm[1]
Related compounds
Related compounds	Sulfur dioxide Trisulfur Disulfur monoxide Cyclic ozone
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). Y verify (what is YN ?) Infobox references

Ozone's odor is reminiscent of chlorine, and detectable by many people at concentrations of as little as 0.1 ppm in air. Ozone's O₃ structure was determined in 1865. The molecule was later proven to have a bent structure and to be weakly diamagnetic. In standard conditions, ozone is a pale blue gas that condenses at cryogenic temperatures to a dark blue liquid and finally a violet-black solid. Ozone's instability with regard to more common dioxygen is such that both concentrated gas and liquid ozone may decompose explosively at elevated temperatures, physical shock, or fast warming to the boiling point.^[5][6] It is therefore used commercially only in low concentrations.

Ozone is a powerful oxidant (far more so than dioxygen) and has many industrial and consumer applications related to oxidation. This same high oxidizing potential, however, causes ozone to damage mucous and respiratory tissues in animals, and also tissues in plants, above concentrations of about 0.1 ppm. While this makes ozone a potent respiratory hazard and pollutant near ground level, a higher concentration in the ozone layer (from two to eight ppm) is beneficial, preventing damaging UV light from reaching the Earth's surface.

Nomenclature

The trivial name ozone is the most commonly used and preferred IUPAC name. The systematic names 2λ⁴-trioxidiene^{[dubious – discuss]} and catena-trioxygen, valid IUPAC names, are constructed according to the substitutive and additive nomenclatures, respectively. The name ozone derives from ozein (ὄζειν), the Greek neuter present participle for smell,^[7] referring to ozone's distinctive smell.

In appropriate contexts, ozone can be viewed as trioxidane with two hydrogen atoms removed, and as such, trioxidanylidene may be used as a systematic name, according to substitutive nomenclature. By default, these names pay no regard to the radicality of the ozone molecule. In an even more specific context, this can also name the non-radical singlet ground state, whereas the diradical state is named trioxidanediyl.

Trioxidanediyl (or ozonide) is used, non-systematically, to refer to the substituent group (-OOO-). Care should be taken to avoid confusing the name of the group for the context-specific name for the ozone given above.

History

Christian Friedrich Schönbein (18 October 1799 – 29 August 1868)

A prototype ozonometer built by John Smyth in 1865

In 1785, Dutch chemist Martinus van Marum was conducting experiments involving electrical sparking above water when he noticed an unusual smell, which he attributed to the electrical reactions, failing to realize that he had in fact created ozone.^[8][9]

A half century later, Christian Friedrich Schönbein noticed the same pungent odour and recognized it as the smell often following a bolt of lightning. In 1839, he succeeded in isolating the gaseous chemical and named it "ozone", from the Greek word ozein (ὄζειν) meaning "to smell".^[10][11] For this reason, Schönbein is generally credited with the discovery of ozone.^{[12][13][14][8]} He also noted the similarity of ozone smell to the smell of phosphorus, and in 1844 proved that the product of reaction of white phosphorus with air is identical.^[10] A subsequent effort to call ozone "electrified oxygen" he ridiculed by proposing to call the ozone from white phosphorus "phosphorized oxygen".^[10] The formula for ozone, O₃, was not determined until 1865 by Jacques-Louis Soret^[15] and confirmed by Schönbein in 1867.^[10][16]

For much of the second half of the 19th century and well into the 20th, ozone was considered a healthy component of the environment by naturalists and health-seekers. Beaumont, California, had as its official slogan "Beaumont: Zone of Ozone", as evidenced on postcards and Chamber of Commerce letterhead.^[17] Naturalists working outdoors often considered the higher elevations beneficial because of their ozone content. "There is quite a different atmosphere [at higher elevation] with enough ozone to sustain the necessary energy [to work]", wrote naturalist Henry Henshaw, working in Hawaii.^[18] Seaside air was considered to be healthy because of its believed ozone content. The smell giving rise to this belief is in fact that of halogenated seaweed metabolites^[19] and dimethyl sulfide.^[20]

Much of ozone's appeal seems to have resulted from its "fresh" smell, which evoked associations with purifying properties. Scientists noted its harmful effects. In 1873 James Dewar and John Gray McKendrick documented that frogs grew sluggish, birds gasped for breath, and rabbits' blood showed decreased levels of oxygen after exposure to "ozonized air", which "exercised a destructive action".^[21][12] Schönbein himself reported that chest pains, irritation of the mucous membranes and difficulty breathing occurred as a result of inhaling ozone, and small mammals died.^[22] In 1911, Leonard Hill and Martin Flack stated in the Proceedings of the Royal Society B that ozone's healthful effects "have, by mere iteration, become part and parcel of common belief; and yet exact physiological evidence in favour of its good effects has been hitherto almost entirely wanting ... The only thoroughly well-ascertained knowledge concerning the physiological effect of ozone, so far attained, is that it causes irritation and œdema of the lungs, and death if inhaled in relatively strong concentration for any time."^[12][23]

During World War I, ozone was tested at Queen Alexandra Military Hospital in London as a possible disinfectant for wounds. The gas was applied directly to wounds for as long as 15 minutes. This resulted in damage to both bacterial cells and human tissue. Other sanitizing techniques, such as irrigation with antiseptics, were found preferable.^[12][24]

Until the 1920s, it was not certain whether small amounts of oxozone, O
₄, were also present in ozone samples due to the difficulty of applying analytical chemistry techniques to the explosive concentrated chemical.^[25][26] In 1923, Georg-Maria Schwab (working for his doctoral thesis under Ernst Hermann Riesenfeld) was the first to successfully solidify ozone and perform accurate analysis which conclusively refuted the oxozone hypothesis.^[25][26] Further hitherto unmeasured physical properties of pure concentrated ozone were determined by the Riesenfeld group in the 1920s.^[25]

Physical properties

Liquid ozone

Ozone is a colourless or pale blue gas, slightly soluble in water and much more soluble in inert non-polar solvents such as carbon tetrachloride or fluorocarbons, in which it forms a blue solution. At 161 K (−112 °C; −170 °F), it condenses to form a dark blue liquid. It is dangerous to allow this liquid to warm to its boiling point, because both concentrated gaseous ozone and liquid ozone can detonate. At temperatures below 80 K (−193.2 °C; −315.7 °F), it forms a violet-black solid.^[27]

Most people can detect about 0.01 μmol/mol of ozone in air where it has a very specific sharp odour somewhat resembling chlorine bleach. Exposure of 0.1 to 1 μmol/mol produces headaches, burning eyes and causing irritation to the respiratory passages.^[28] Even low concentrations of ozone in air are very destructive to organic materials such as latex, plastics and animal lung tissue.

The ozone molecule is diamagnetic.^[29]

Structure

According to experimental evidence from microwave spectroscopy, ozone is a bent molecule, with C_2v symmetry (similar to the water molecule).^[30] The O–O distances are 127.2 pm (1.272 Å). The O–O–O angle is 116.78°.^[31] The central atom is sp² hybridized with one lone pair. Ozone is a polar molecule with a dipole moment of 0.53 D.^[32] The molecule can be represented as a resonance hybrid with two contributing structures, each with a single bond on one side and double bond on the other. The arrangement possesses an overall bond order of 1.5 for both sides. It is isoelectronic with the nitrite anion. Naturally occurring ozone can be composed of substituted isotopes (¹⁶O, ¹⁷O, ¹⁸O). A cyclic form has been predicted but not observed.

Resonance Lewis structures of the ozone molecule

Reactions

Ozone is among the most powerful oxidizing agents known, far stronger than O₂. It is also unstable at high concentrations, decaying into ordinary diatomic oxygen. Its half-life varies with atmospheric conditions such as temperature, humidity, and air movement. Under laboratory conditions, the half-life will average ~1500 minutes (25 hours) in still air at room temperature (24 °C), zero humidity with zero air changes per hour.^[33]

${\displaystyle {\ce {2 O3 -> 3 O2}}}$

This reaction proceeds more rapidly with increasing temperature. Deflagration of ozone can be triggered by a spark and can occur in ozone concentrations of 10 wt% or higher.^[34]

Ozone can also be produced from oxygen at the anode of an electrochemical cell. This reaction can create smaller quantities of ozone for research purposes.^[35]

${\displaystyle {\ce {O3_{(g)}{}+ 2H+{}+ 2e- <=> O2_{(g)}{}+ H2O}}\quad (E^{\circ }={\text{2.075 V}})}$^[36]

This can be observed as an unwanted reaction in a Hoffman gas apparatus during the electrolysis of water when the voltage is set above the necessary voltage.

With metals

Ozone will oxidize most metals (except gold, platinum, and iridium) to oxides of the metals in their highest oxidation state. For example:

${\displaystyle {\begin{aligned}&{\ce {Cu + O3 -> CuO + O2}}\\&{\ce {Ag + O3 -> AgO + O2}}\end{aligned}}}$

With nitrogen and carbon compounds

Ozone also oxidizes nitric oxide to nitrogen dioxide:

${\displaystyle {\ce {NO + O3 -> NO2 + O2}}}$

This reaction is accompanied by chemiluminescence. The NO₂ can be further oxidized to nitrate radical:

${\displaystyle {\ce {NO2 + O3 -> NO3 + O2}}}$

The NO₃ formed can react with NO₂ to form dinitrogen pentoxide (N₂O₅).

Solid nitronium perchlorate can be made from NO₂, ClO₂, and O₃ gases:

${\displaystyle {\ce {NO2 + ClO2 + 2 O3 -> NO2ClO4 + 2 O2}}}$

Ozone does not react with ammonium salts, but it oxidizes ammonia to ammonium nitrate:

${\displaystyle {\ce {2 NH3 + 4 O3 -> NH4NO3 + 4 O2 + H2O}}}$

Ozone reacts with carbon to form carbon dioxide, even at room temperature:

${\displaystyle {\ce {C + 2 O3 -> CO2 + 2 O2}}}$

With sulfur compounds

Ozone oxidizes sulfides to sulfates. For example, lead(II) sulfide is oxidized to lead(II) sulfate:

${\displaystyle {\ce {PbS + 4 O3 -> PbSO4 + 4 O2}}}$

Sulfuric acid can be produced from ozone, water and either elemental sulfur or sulfur dioxide:

${\displaystyle {\begin{aligned}&{\ce {S + H2O + O3 -> H2SO4}}\\&{\ce {3 SO2 + 3 H2O + O3 -> 3 H2SO4}}\end{aligned}}}$

In the gas phase, ozone reacts with hydrogen sulfide to form sulfur dioxide:

${\displaystyle {\ce {H2S + O3 -> SO2 + H2O}}}$

In an aqueous solution, however, two competing simultaneous reactions occur, one to produce elemental sulfur, and one to produce sulfuric acid:

${\displaystyle {\begin{aligned}&{\ce {H2S + O3 -> S + O2 + H2O}}\\&{\ce {3 H2S + 4 O3 -> 3 H2SO4}}\end{aligned}}}$

With alkenes and alkynes

Main article: ozonolysis

Alkenes can be oxidatively cleaved by ozone, in a process called ozonolysis, giving alcohols, aldehydes, ketones, and carboxylic acids, depending on the second step of the workup.

General reaction equation of ozonolysis

Ozone can also cleave alkynes to form an acid anhydride or diketone product.^[37] If the reaction is performed in the presence of water, the anhydride hydrolyzes to give two carboxylic acids.

Usually ozonolysis is carried out in a solution of dichloromethane, at a temperature of −78 °C. After a sequence of cleavage and rearrangement, an organic ozonide is formed. With reductive workup (e.g. zinc in acetic acid or dimethyl sulfide), ketones and aldehydes will be formed, with oxidative workup (e.g. aqueous or alcoholic hydrogen peroxide), carboxylic acids will be formed.^[38]

Other substrates

All three atoms of ozone may also react, as in the reaction of tin(II) chloride with hydrochloric acid and ozone:

${\displaystyle {\ce {3 SnCl2 + 6 HCl + O3 -> 3 SnCl4 + 3 H2O}}}$

Iodine perchlorate can be made by treating iodine dissolved in cold anhydrous perchloric acid with ozone:

${\displaystyle {\ce {I2 + 6 HClO4 + O3 -> 2 I(ClO4)3 + 3 H2O}}}$

Ozone could also react with potassium iodide to give oxygen and iodine gas that can be titrated for quantitative determination:^[39]

${\displaystyle {\ce {2KI + O3 + H2O -> 2KOH + O2 + I2}}}$

Combustion

Ozone can be used for combustion reactions and combustible gases; ozone provides higher temperatures than burning in dioxygen (O₂). The following is a reaction for the combustion of carbon subnitride which can also cause higher temperatures:

${\displaystyle {\ce {3 C4N2 + 4 O3 -> 12 CO + 3 N2}}}$

Ozone can react at cryogenic temperatures. At 77 K (−196.2 °C; −321.1 °F), atomic hydrogen reacts with liquid ozone to form a hydrogen superoxide radical, which dimerizes:^[40]

${\displaystyle {\begin{aligned}&{\ce {H + O3 -> HO2 + O}}\\&{\ce {2 HO2 -> H2O4}}\end{aligned}}}$

Ozone decomposition

Types of ozone decomposition

Ozone is a toxic substance,^[41][42] commonly found or generated in human environments (aircraft cabins, offices with photocopiers, laser printers, sterilizers...) and its catalytic decomposition is very important to reduce pollution. This type of decomposition is the most widely used, especially with solid catalysts, and it has many advantages such as a higher conversion with a lower temperature. Furthermore, the product and the catalyst can be instantaneously separated, and this way the catalyst can be easily recovered without using any separation operation. Moreover, the most used materials in the catalytic decomposition of ozone in the gas phase are noble metals like Pt, Rh or Pd and transition metals such as Mn, Co, Cu, Fe, Ni or Ag.

There are two other possibilities for the ozone decomposition in gas phase:

The first one is a thermal decomposition where the ozone can be decomposed using only the action of heat. The problem is that this type of decomposition is very slow with temperatures below 250 °C. However, the decomposition rate can be increased working with higher temperatures but this would involve a high energy cost.

The second one is a photochemical decomposition, which consists of radiating ozone with ultraviolet radiation (UV) and it gives rise to oxygen and radical peroxide.^[43]

Kinetics of ozone decomposition into molecular oxygen

The process of ozone decomposition is a complex reaction involving two elementary reactions that finally lead to molecular oxygen, and this means that the reaction order and the rate law cannot be determined by the stoichiometry of the fitted equation.

Overall reaction: ${\displaystyle {\ce {2 O3 -> 3 O2}}}$

Rate law (observed): ${\displaystyle V={\frac {K\cdot [{\ce {O3}}]^{2}}{[{\ce {O2}}]}}}$

It has been determined that the ozone decomposition follows a first order kinetics, and from the rate law above it can be determined that the partial order respect to molecular oxygen is -1 and respect to ozone is 2, therefore the global reaction order is 1.

The ozone decomposition consists of two elementary steps: The first one corresponds to a unimolecular reaction because one only molecule of ozone decomposes into two products (molecular oxygen and oxygen). Then, the oxygen from the first step is an intermediate because it participates as a reactant in the second step, which is a bimolecular reaction because there are two different reactants (ozone and oxygen) that give rise to one product, that corresponds to molecular oxygen in the gas phase.

Step 1: Unimolecular reaction    ${\displaystyle {\ce {O3 -> O2 + O}}}$

Step 2: Bimolecular reaction     ${\displaystyle {\ce {O3 + O -> 2 O2}}}$

These two steps have different reaction rates, the first one is reversible and faster than the second reaction, which is slower, so this means that the determining step is the second reaction and this is used to determine the observed reaction rate. The reaction rate laws for every step are the ones that follow:

${\displaystyle V_{1}=K_{1}\cdot [{\ce {O3}}]\qquad V_{2}=K_{2}\cdot [{\ce {O}}]\cdot [{\ce {O3}}]}$

The following mechanism allows to explain the rate law of the ozone decomposition observed experimentally, and also it allows to determine the reaction orders with respect to ozone and oxygen, with which the overall reaction order will be determined. The slower step, the bimolecular reaction, is the one that determines the rate of product formation, and considering that this step gives rise to two oxygen molecules the rate law has this form:

${\displaystyle V=2K_{2}\cdot [{\ce {O}}]\cdot [{\ce {O3}}]}$

However, this equation depends on the concentration of oxygen (intermediate), which can be determined considering the first step. Since the first step is faster and reversible and the second step is slower, the reactants and products from the first step are in equilibrium, so the concentration of the intermediate can be determined as follows:

${\displaystyle K_{1}={\frac {K_{1}}{K_{-1}}}={\frac {[{\ce {O2}}]\cdot [{\ce {O}}]}{[{\ce {O3}}]}}}$

${\displaystyle [{\ce {O}}]={\frac {K_{1}\cdot [{\ce {O3}}]}{K_{-1}\cdot [{\ce {O2}}]}}}$

Then using these equations, the formation rate of molecular oxygen is as shown below:

${\displaystyle V={2K_{2}\cdot K_{1}\cdot [{\ce {O_3}}]^{2} \over K_{-1}\cdot [{\ce {O_2}}]}}$

Finally, the mechanism presented allows to establish the rate observed experimentally, with a rate constant (K_obs) and corresponding to a first order kinetics, as follows:^[44]

${\displaystyle V={K_{\text{obs}}\cdot [{\ce {O_3}}]^{2} \over [{\ce {O_2}}]}=K_{\text{obs}}\cdot [{\ce {O_3}}]^{2}\cdot [{\ce {O_2}}]^{-1}}$

where ${\displaystyle K_{\text{obs}}={2K_{2}\cdot K_{1} \over K_{-1}}}$

Reduction to ozonides

Reduction of ozone gives the ozonide anion, O−3. Derivatives of this anion are explosive and must be stored at cryogenic temperatures. Ozonides for all the alkali metals are known. KO₃, RbO₃, and CsO₃ can be prepared from their respective superoxides:

${\displaystyle {\ce {KO2 + O3 -> KO3 + O2}}}$

Although KO3 can be formed as above, it can also be formed from potassium hydroxide and ozone:^[45]

${\displaystyle {\ce {2 KOH + 5 O3 -> 2 KO3 + 5 O2 + H2O}}}$

NaO₃ and LiO₃ must be prepared by action of CsO₃ in liquid NH₃ on an ion-exchange resin containing Na⁺ or Li⁺ ions:^[46]

${\displaystyle {\ce {CsO3 + Na+ -> Cs+ + NaO3}}}$

A solution of calcium in ammonia reacts with ozone to give ammonium ozonide and not calcium ozonide:^[40]

${\displaystyle {\begin{aligned}{\ce {3 Ca + 10 NH3 + 6 O3 ->\ }}&{\ce {Ca*6NH3 + Ca(OH)2 + Ca(NO3)2}}\\&+{\ce {2 NH4O3 + 2 O2 + H2}}\end{aligned}}}$

Applications

Ozone can be used to remove iron and manganese from water, forming a precipitate which can be filtered:

${\displaystyle {\begin{aligned}&{\ce {2 Fe^2+{}+ O3 + 5 H2O -> 2 Fe(OH)_3{(s)}{}+ O2{}+ 4 H+}}\\&{\ce {2 Mn^2+{}+ 2 O3 + 4 H2O -> 2 MnO(OH)_2{(s)}{}+ 2 O2{}+ 4 H+}}\end{aligned}}}$

Ozone will also oxidize dissolved hydrogen sulfide in water to sulfurous acid:

${\displaystyle {\ce {3 O3 + H2S -> H2SO3 + 3 O2}}}$

These three reactions are central in the use of ozone-based well water treatment.

Ozone will also detoxify cyanides by converting them to cyanates.

${\displaystyle {\ce {CN- + O3 -> CNO- + O2}}}$

Ozone will also completely decompose urea:^[47]

${\displaystyle {\ce {(NH2)2CO + O3 -> N2 + CO2 + 2 H2O}}}$

Spectroscopic properties

Ozone is a bent triatomic molecule with three vibrational modes: the symmetric stretch (1103.157 cm⁻¹), bend (701.42 cm⁻¹) and antisymmetric stretch (1042.096 cm⁻¹).^[48] The symmetric stretch and bend are weak absorbers, but the antisymmetric stretch is strong and responsible for ozone being an important minor greenhouse gas. This IR band is also used to detect ambient and atmospheric ozone although UV-based measurements are more common.^[49]

The electromagnetic spectrum of ozone is quite complex. An overview can be seen at the MPI Mainz UV/VIS Spectral Atlas of Gaseous Molecules of Atmospheric Interest.^[50]

All of the bands are dissociative, meaning that the molecule falls apart to O + O₂ after absorbing a photon. The most important absorption is the Hartley band, extending from slightly above 300 nm down to slightly above 200 nm. It is this band that is responsible for absorbing UV C in the stratosphere.

On the high wavelength side, the Hartley band transitions to the so-called Huggins band, which falls off rapidly until disappearing by ~360 nm. Above 400 nm, extending well out into the NIR, are the Chappius and Wulf bands. There, unstructured absorption bands are useful for detecting high ambient concentrations of ozone, but are so weak that they do not have much practical effect.

There are additional absorption bands in the far UV, which increase slowly from 200 nm down to reaching a maximum at ~120 nm.

Ozone in Earth's atmosphere

The distribution of atmospheric ozone in partial pressure as a function of altitude

Concentration of ozone as measured by the Nimbus-7 satellite

Total ozone concentration in June 2000 as measured by the NASA EP-TOMS satellite instrument

The standard way to express total ozone levels (the amount of ozone in a given vertical column) in the atmosphere is by using Dobson units. Point measurements are reported as mole fractions in nmol/mol (parts per billion, ppb) or as concentrations in μg/m³. The study of ozone concentration in the atmosphere started in the 1920s.^[51]

Ozone layer

Main article: Ozone layer

Location and production

See also: Ozone–oxygen cycle and Ozone depletion

The highest levels of ozone in the atmosphere are in the stratosphere, in a region also known as the ozone layer between about 10 and 50 km above the surface (or between about 6 and 31 miles). However, even in this "layer", the ozone concentrations are only two to eight parts per million, so most of the oxygen there is dioxygen, O₂, at about 210,000 parts per million by volume.^[52]

Ozone in the stratosphere is mostly produced from short-wave ultraviolet rays between 240 and 160 nm. Oxygen starts to absorb weakly at 240 nm in the Herzberg bands, but most of the oxygen is dissociated by absorption in the strong Schumann–Runge bands between 200 and 160 nm where ozone does not absorb. While shorter wavelength light, extending to even the X-Ray limit, is energetic enough to dissociate molecular oxygen, there is relatively little of it, and, the strong solar emission at Lyman-alpha, 121 nm, falls at a point where molecular oxygen absorption is a minimum.^[53]

The process of ozone creation and destruction is called the Chapman cycle and starts with the photolysis of molecular oxygen

${\displaystyle {\ce {O2->[{\ce {photon}}][({\ce {radiation}}\ \lambda \ <\ 240\ {\ce {nm}})]2O}}}$

followed by reaction of the oxygen atom with another molecule of oxygen to form ozone.

${\displaystyle {\ce {O + O2 + M -> O3 + M}}}$

where "M" denotes the third body that carries off the excess energy of the reaction. The ozone molecule can then absorb a UV-C photon and dissociate

${\displaystyle {\ce {O3 -> O + O2}}+{\text{kinetic energy}}}$

The excess kinetic energy heats the stratosphere when the O atoms and the molecular oxygen fly apart and collide with other molecules. This conversion of UV light into kinetic energy warms the stratosphere. The oxygen atoms produced in the photolysis of ozone then react back with other oxygen molecule as in the previous step to form more ozone. In the clear atmosphere, with only nitrogen and oxygen, ozone can react with the atomic oxygen to form two molecules of O₂:

${\displaystyle {\ce {O3 + O -> 2 O2}}}$

An estimate of the rate of this termination step to the cycling of atomic oxygen back to ozone can be found simply by taking the ratios of the concentration of O₂ to O₃. The termination reaction is catalysed by the presence of certain free radicals, of which the most important are hydroxyl (OH), nitric oxide (NO) and atomic chlorine (Cl) and bromine (Br). In the second half of the 20th century, the amount of ozone in the stratosphere was discovered to be declining, mostly because of increasing concentrations of chlorofluorocarbons (CFC) and similar chlorinated and brominated organic molecules. The concern over the health effects of the decline led to the 1987 Montreal Protocol, the ban on the production of many ozone depleting chemicals and in the first and second decade of the 21st century the beginning of the recovery of stratospheric ozone concentrations.

Importance to surface-dwelling life on Earth

Levels of ozone at various altitudes and blocking of different bands of ultraviolet radiation. Essentially all UVC (100–280 nm) is blocked by dioxygen (at 100–200 nm) or by ozone (at 200–280 nm) in the atmosphere. The shorter portion of this band and even more energetic UV causes the formation of the ozone layer, when single oxygen atoms produced by UV photolysis of dioxygen (below 240 nm) react with more dioxygen. The ozone layer itself then blocks most, but not quite all, sunburn-producing UVB (280–315 nm). The band of UV closest to visible light, UVA (315–400 nm), is hardly affected by ozone, and most of it reaches the ground.

Ozone in the ozone layer filters out sunlight wavelengths from about 200 nm UV rays to 315 nm, with ozone peak absorption at about 250 nm.^[54] This ozone UV absorption is important to life, since it extends the absorption of UV by ordinary oxygen and nitrogen in air (which absorb all wavelengths < 200 nm) through the lower UV-C (200–280 nm) and the entire UV-B band (280–315 nm). The small unabsorbed part that remains of UV-B after passage through ozone causes sunburn in humans, and direct DNA damage in living tissues in both plants and animals. Ozone's effect on mid-range UV-B rays is illustrated by its effect on UV-B at 290 nm, which has a radiation intensity 350 million times as powerful at the top of the atmosphere as at the surface. Nevertheless, enough of UV-B radiation at similar frequency reaches the ground to cause some sunburn, and these same wavelengths are also among those responsible for the production of vitamin D in humans.

The ozone layer has little effect on the longer UV wavelengths called UV-A (315–400 nm), but this radiation does not cause sunburn or direct DNA damage. While UV-A probably does cause long-term skin damage in certain humans, it is not as dangerous to plants and to the health of surface-dwelling organisms on Earth in general (see ultraviolet for more information on near ultraviolet).

Low level ozone

Main articles: Tropospheric ozone and Photochemical smog

Low level ozone (or tropospheric ozone) is an atmospheric pollutant.^[55] It is not emitted directly by car engines or by industrial operations, but formed by the reaction of sunlight on air containing hydrocarbons and nitrogen oxides that react to form ozone directly at the source of the pollution or many kilometers downwind.

Ozone reacts directly with some hydrocarbons such as aldehydes and thus begins their removal from the air, but the products are themselves key components of smog. Ozone photolysis by UV light leads to production of the hydroxyl radical HO• and this plays a part in the removal of hydrocarbons from the air, but is also the first step in the creation of components of smog such as peroxyacyl nitrates, which can be powerful eye irritants. The atmospheric lifetime of tropospheric ozone is about 22 days; its main removal mechanisms are being deposited to the ground, the above-mentioned reaction giving HO•, and by reactions with OH and the peroxy radical HO₂•.^[56]

There is evidence of significant reduction in agricultural yields because of increased ground-level ozone and pollution which interferes with photosynthesis and stunts overall growth of some plant species.^[57][58] The United States Environmental Protection Agency (EPA) has proposed a secondary regulation to reduce crop damage, in addition to the primary regulation designed for the protection of human health.

Low level ozone in urban areas

Certain examples of cities with elevated ozone readings are Denver, Colorado; Houston, Texas; and Mexico City, Mexico. Houston has a reading of around 41 nmol/mol, while Mexico City is far more hazardous, with a reading of about 125 nmol/mol.^[58]

Low level ozone, or tropospheric ozone, is the most concerning type of ozone pollution in urban areas and is increasing in general.^[59] Ozone pollution in urban areas affects denser populations, and is worsened by high populations of vehicles, which emit pollutants NO₂ and VOCs, the main contributors to problematic ozone levels.^[60] Ozone pollution in urban areas is especially concerning with increasing temperatures, raising heat-related mortality during heat waves.^[61] During heat waves in urban areas, ground level ozone pollution can be 20% higher than usual.^[62] Ozone pollution in urban areas reaches higher levels of exceedance in the summer and autumn, which may be explained by weather patterns and traffic patterns.^[60] People experiencing poverty are more affected by pollution in general, even though these populations are less likely to be contributing to pollution levels.^[63]

As mentioned above, Denver, Colorado, is one of the many cities in the U.S. that have high amounts of ozone. According to the American Lung Association, the Denver–Aurora area is the 14th most ozone-polluted area in the U.S.^[64] The problem of high ozone levels is not new to this area. In 2004, the EPA allotted the Denver Metro/North Front Range^[b] as non-attainment areas per 1997's 8-hour ozone standard,^[65] but later deferred this status until 2007. The non-attainment standard indicates that an area does not meet the EPA's air quality standards. The Colorado Ozone Action Plan was created in response, and numerous changes were implemented from this plan. The first major change was that car emission testing was expanded across the state to more counties that did not previously mandate emissions testing, like areas of Larimer and Weld County. There have also been changes made to decrease Nitrogen Oxides (NOx) and Volatile Organic Compound (VOC) emissions, which should help lower ozone levels.

One large contributor to high ozone levels in the area is the oil and natural gas industry situated in the Denver-Julesburg Basin (DJB) which overlaps with a majority of Colorado's metropolitan areas. Ozone is created naturally in the Earth's stratosphere, but is also created in the troposphere from human efforts. Briefly mentioned above, NOx and VOCs react with sunlight to create ozone through a process called photochemistry. One hour elevated ozone events (<75 ppb) "occur during June–August indicating that elevated ozone levels are driven by regional photochemistry".^[66] According to an article from the University of Colorado-Boulder, "Oil and natural gas VOC emission have a major role in ozone production and bear the potential to contribute to elevated O₃ levels in the Northern Colorado Front Range (NCFR)".^[66] Using complex analyses to research wind patterns and emissions from large oil and natural gas operations, the authors concluded that "elevated O₃ levels in the NCFR are predominantly correlated with air transport from N– ESE, which are the upwind sectors where the O&NG operations in the Wattenberg Field area of the DJB are located".^[66]

Contained in the Colorado Ozone Action Plan, created in 2008, plans exist to evaluate "emission controls for large industrial sources of NOx" and "statewide control requirements for new oil and gas condensate tanks and pneumatic valves".^[67] In 2011, the Regional Haze Plan was released that included a more specific plan to help decrease NOx emissions. These efforts are increasingly difficult to implement and take many years to come to pass. Of course there are also other reasons that ozone levels remain high. These include: a growing population meaning more car emissions, and the mountains along the NCFR that can trap emissions. If interested, daily air quality readings can be found at the Colorado Department of Public Health and Environment's website.^[68] As noted earlier, Denver continues to experience high levels of ozone to this day. It will take many years and a systems-thinking approach to combat this issue of high ozone levels in the Front Range of Colorado.

Ozone cracking

Main article: Ozone cracking

Ozone cracking in natural rubber tubing

Ozone gas attacks any polymer possessing olefinic or double bonds within its chain structure, such as natural rubber, nitrile rubber, and styrene-butadiene rubber. Products made using these polymers are especially susceptible to attack, which causes cracks to grow longer and deeper with time, the rate of crack growth depending on the load carried by the rubber component and the concentration of ozone in the atmosphere. Such materials can be protected by adding antiozonants, such as waxes, which bond to the surface to create a protective film or blend with the material and provide long term protection. Ozone cracking used to be a serious problem in car tires,^[69] for example, but it is not an issue with modern tires. On the other hand, many critical products, like gaskets and O-rings, may be attacked by ozone produced within compressed air systems. Fuel lines made of reinforced rubber are also susceptible to attack, especially within the engine compartment, where some ozone is produced by electrical components. Storing rubber products in close proximity to a DC electric motor can accelerate ozone cracking. The commutator of the motor generates sparks which in turn produce ozone.

Ozone as a greenhouse gas

Ozone with an anthropogenic "fingerprint" contributes to global warming and climate change, especially when present in the upper troposphere.^[70]

Although ozone was present at ground level before the Industrial Revolution, peak concentrations are now far higher than the pre-industrial levels, and even background concentrations well away from sources of pollution are substantially higher.^[71][72] Ozone acts as a greenhouse gas, absorbing some of the infrared energy emitted by the earth. Quantifying the greenhouse gas potency of ozone is difficult because it is not present in uniform concentrations across the globe. However, the most widely accepted scientific assessments relating to climate change (e.g. the Intergovernmental Panel on Climate Change Third Assessment Report)^[73] suggest that the radiative forcing of tropospheric ozone is about 25% that of carbon dioxide.

The annual global warming potential of tropospheric ozone is between 918 and 1022 tons carbon dioxide equivalent/tons tropospheric ozone. This means on a per-molecule basis, ozone in the troposphere has a radiative forcing effect roughly 1,000 times as strong as carbon dioxide. However, tropospheric ozone is a short-lived greenhouse gas, which decays in the atmosphere much more quickly than carbon dioxide. This means that over a 20-year span, the global warming potential of tropospheric ozone is much less, roughly 62 to 69 tons carbon dioxide equivalent / ton tropospheric ozone.^[74]

Because of its short-lived nature, tropospheric ozone does not have strong global effects, but has very strong radiative forcing effects on regional scales. In fact, there are regions of the world where tropospheric ozone has a radiative forcing up to 150% of carbon dioxide.^[75] For example, ozone increase in the troposphere is shown to be responsible for ~30% of upper Southern Ocean interior warming between 1955 and 2000.^[76]

Health effects

See also: Environmental impact of the coal industry

For the last few decades, scientists studied the effects of acute and chronic ozone exposure on human health. Hundreds of studies suggest that ozone is harmful to people at levels currently found in urban areas.^[77][78] Ozone has been shown to affect the respiratory, cardiovascular and central nervous system. Early death and problems in reproductive health and development are also shown to be associated with ozone exposure.^[79]

Vulnerable populations

The American Lung Association has identified five populations who are especially vulnerable to the effects of breathing ozone:^[80]

1. Children and teens
2. People 65 years old and older
3. People who work or exercise outdoors
4. People with existing lung diseases, such as asthma and chronic obstructive pulmonary disease (also known as COPD, which includes emphysema and chronic bronchitis)
5. People with cardiovascular disease

Additional evidence suggests that women, those with obesity and low-income populations may also face higher risk from ozone, although more research is needed.^[80]

Acute ozone exposure

Acute ozone exposure ranges from hours to a few days. Because ozone is a gas, it directly affects the lungs and the entire respiratory system. Inhaled ozone causes inflammation and acute—but reversible—changes in lung function, as well as airway hyperresponsiveness.^[81] These changes lead to shortness of breath, wheezing, and coughing which may exacerbate lung diseases, like asthma or chronic obstructive pulmonary disease (COPD) resulting in the need to receive medical treatment.^[82][83] Acute and chronic exposure to ozone has been shown to cause an increased risk of respiratory infections, due to the following mechanism.^[84]

Multiple studies have been conducted to determine the mechanism behind ozone's harmful effects, particularly in the lungs. These studies have shown that exposure to ozone causes changes in the immune response within the lung tissue, resulting in disruption of both the innate and adaptive immune response, as well as altering the protective function of lung epithelial cells.^[85] It is thought that these changes in immune response and the related inflammatory response are factors that likely contribute to the increased risk of lung infections, and worsening or triggering of asthma and reactive airways after exposure to ground-level ozone pollution.^[85][86]

The innate (cellular) immune system consists of various chemical signals and cell types that work broadly and against multiple pathogen types, typically bacteria or foreign bodies/substances in the host.^[86][87] The cells of the innate system include phagocytes, neutrophils,^[87] both thought to contribute to the mechanism of ozone pathology in the lungs, as the functioning of these cell types have been shown to change after exposure to ozone.^[86] Macrophages, cells that serve the purpose of eliminating pathogens or foreign material through the process of "phagocytosis",^[87] have been shown to change the level of inflammatory signals they release in response to ozone, either up-regulating and resulting in an inflammatory response in the lung, or down-regulating and reducing immune protection.^[85] Neutrophils, another important cell type of the innate immune system that primarily targets bacterial pathogens,^[87] are found to be present in the airways within 6 hours of exposure to high ozone levels. Despite high levels in the lung tissues, however, their ability to clear bacteria appears impaired by exposure to ozone.^[85]

The adaptive immune system is the branch of immunity that provides long-term protection via the development of antibodies targeting specific pathogens and is also impacted by high ozone exposure.^[86][87] Lymphocytes, a cellular component of the adaptive immune response, produce an increased amount of inflammatory chemicals called "cytokines" after exposure to ozone, which may contribute to airway hyperreactivity and worsening asthma symptoms.^[85]

The airway epithelial cells also play an important role in protecting individuals from pathogens. In normal tissue, the epithelial layer forms a protective barrier, and also contains specialized ciliary structures that work to clear foreign bodies, mucus and pathogens from the lungs. When exposed to ozone, the cilia become damaged and mucociliary clearance of pathogens is reduced. Furthermore, the epithelial barrier becomes weakened, allowing pathogens to cross the barrier, proliferate and spread into deeper tissues. Together, these changes in the epithelial barrier help make individuals more susceptible to pulmonary infections.^[85]

Inhaling ozone not only affects the immune system and lungs, but it may also affect the heart as well. Ozone causes short-term autonomic imbalance leading to changes in heart rate and reduction in heart rate variability;^[88] and high levels exposure for as little as one-hour results in a supraventricular arrhythmia in the elderly,^[89] both increase the risk of premature death and stroke. Ozone may also lead to vasoconstriction resulting in increased systemic arterial pressure contributing to increased risk of cardiac morbidity and mortality in patients with pre-existing cardiac diseases.^[90][91]

Chronic ozone exposure

Breathing ozone for periods longer than eight hours at a time for weeks, months or years defines chronic exposure. Numerous studies suggest a serious impact on the health of various populations from this exposure.

One study finds significant positive associations between chronic ozone and all-cause, circulatory, and respiratory mortality with 2%, 3%, and 12% increases in risk per 10 ppb^[92] and report an association (95% CI) of annual ozone and all-cause mortality with a hazard ratio of 1.02 (1.01–1.04), and with cardiovascular mortality of 1.03 (1.01–1.05). A similar study finds similar associations with all-cause mortality and even larger effects for cardiovascular mortality.^[93] An increased risk of mortality from respiratory causes is associated with long-term chronic exposure to ozone.^[94]

Chronic ozone has detrimental effects on children, especially those with asthma. The risk for hospitalization in children with asthma increases with chronic exposure to ozone; younger children and those with low-income status are even at greater risk.^[95]

Adults suffering from respiratory diseases (asthma,^[96] COPD,^[97] lung cancer^[98]) are at a higher risk of mortality and morbidity and critically ill patients have an increased risk of developing acute respiratory distress syndrome with chronic ozone exposure as well.^[99]

Ozone produced by air cleaners

Ozone generators sold as air cleaners intentionally produce the gas ozone.^[42] These are often marketed to control indoor air pollution, and use misleading terms to describe ozone. Some examples are describing it as "energized oxygen" or "pure air", suggesting that ozone is a healthy or "better" kind of oxygen.^[42] However, according to the EPA, "There is evidence to show that at concentrations that do not exceed public health standards, ozone is not effective at removing many odor-causing chemicals", and "If used at concentrations that do not exceed public health standards, ozone applied to indoor air does not effectively remove viruses, bacteria, mold, or other biological pollutants.".^[42] Furthermore, another report states that "results of some controlled studies show that concentrations of ozone considerably higher than these [human safety] standards are possible even when a user follows the manufacturer's operating instructions".^[100]

The California Air Resources Board has a page listing air cleaners (many with ionizers) meeting their indoor ozone limit of 0.050 parts per million.^[101] From that article:

All portable indoor air cleaning devices sold in California must be certified by the California Air Resources Board (CARB). To be certified, air cleaners must be tested for electrical safety and ozone emissions, and meet an ozone emission concentration limit of 0.050 parts per million. For more information about the regulation, visit the air cleaner regulation.

Ozone air pollution

Further information: Ground level ozone and Climate change

Red Alder leaf, showing discolouration caused by ozone pollution^[102]

Signboard in Gulfton, Houston indicating an ozone watch

Ozone precursors are a group of pollutants, predominantly those emitted during the combustion of fossil fuels. Ground-level ozone pollution (tropospheric ozone) is created near the Earth's surface by the action of daylight UV rays on these precursors. The ozone at ground level is primarily from fossil fuel precursors, but methane is a natural precursor, and the very low natural background level of ozone at ground level is considered safe. This section examines the health impacts of fossil fuel burning, which raises ground level ozone far above background levels.

There is a great deal of evidence to show that ground-level ozone can harm lung function and irritate the respiratory system.^[55][103] Exposure to ozone (and the pollutants that produce it) is linked to premature death, asthma, bronchitis, heart attack, and other cardiopulmonary problems.^[104][105]

Long-term exposure to ozone has been shown to increase risk of death from respiratory illness.^[42] A study of 450,000 people living in U.S. cities saw a significant correlation between ozone levels and respiratory illness over the 18-year follow-up period. The study revealed that people living in cities with high ozone levels, such as Houston or Los Angeles, had an over 30% increased risk of dying from lung disease.^[106][107]

Air quality guidelines such as those from the World Health Organization, the U.S. Environmental Protection Agency (EPA), and the European Union are based on detailed studies designed to identify the levels that can cause measurable ill health effects.

According to scientists with the EPA, susceptible people can be adversely affected by ozone levels as low as 40 nmol/mol.^{[105][108][109]} In the EU, the current target value for ozone concentrations is 120 μg/m³ which is about 60 nmol/mol. This target applies to all member states in accordance with Directive 2008/50/EC.^[110] Ozone concentration is measured as a maximum daily mean of 8 hour averages and the target should not be exceeded on more than 25 calendar days per year, starting from January 2010. Whilst the directive requires in the future a strict compliance with 120 μg/m³ limit (i.e. mean ozone concentration not to be exceeded on any day of the year), there is no date set for this requirement and this is treated as a long-term objective.^[111]

In the US, the Clean Air Act directs the EPA to set National Ambient Air Quality Standards for several pollutants, including ground-level ozone, and counties out of compliance with these standards are required to take steps to reduce their levels. In May 2008, under a court order, the EPA lowered its ozone standard from 80 nmol/mol to 75 nmol/mol. The move proved controversial, since the Agency's own scientists and advisory board had recommended lowering the standard to 60 nmol/mol.^[105] Many public health and environmental groups also supported the 60 nmol/mol standard,^[112] and the World Health Organization recommends 100 μg/m³ (51 nmol/mol).^[113]

On January 7, 2010, the U.S. Environmental Protection Agency (EPA) announced proposed revisions to the National Ambient Air Quality Standard (NAAQS) for the pollutant ozone, the principal component of smog:

... EPA proposes that the level of the 8-hour primary standard, which was set at 0.075 μmol/mol in the 2008 final rule, should instead be set at a lower level within the range of 0.060 to 0.070 μmol/mol, to provide increased protection for children and other at risk populations against an array of O
₃ – related adverse health effects that range from decreased lung function and increased respiratory symptoms to serious indicators of respiratory morbidity including emergency department visits and hospital admissions for respiratory causes, and possibly cardiovascular-related morbidity as well as total non- accidental and cardiopulmonary mortality ...^[114]

On October 26, 2015, the EPA published a final rule with an effective date of December 28, 2015, that revised the 8-hour primary NAAQS from 0.075 ppm to 0.070 ppm.^[115]

The EPA has developed an air quality index (AQI) to help explain air pollution levels to the general public. Under the current standards, eight-hour average ozone mole fractions of 85 to 104 nmol/mol are described as "unhealthy for sensitive groups", 105 nmol/mol to 124 nmol/mol as "unhealthy", and 125 nmol/mol to 404 nmol/mol as "very unhealthy".^[116]

Ozone can also be present in indoor air pollution, partly as a result of electronic equipment such as photocopiers. A connection has also been known to exist between the increased pollen, fungal spores, and ozone caused by thunderstorms and hospital admissions of asthma sufferers.^[117]

In the Victorian era, one British folk myth held that the smell of the sea was caused by ozone. In fact, the characteristic "smell of the sea" is caused by dimethyl sulfide, a chemical generated by phytoplankton. Victorian Britons considered the resulting smell "bracing".^[118]

Heat waves

An investigation to assess the joint mortality effects of ozone and heat during the European heat waves in 2003, concluded that these appear to be additive.^[119]

Physiology

See also: Trioxidane

Ozone, along with reactive forms of oxygen such as superoxide, singlet oxygen, hydrogen peroxide, and hypochlorite ions, is produced by white blood cells and other biological systems (such as the roots of marigolds) as a means of destroying foreign bodies. Ozone reacts directly with organic double bonds. Also, when ozone breaks down to dioxygen it gives rise to oxygen free radicals, which are highly reactive and capable of damaging many organic molecules. Moreover, it is believed that the powerful oxidizing properties of ozone may be a contributing factor of inflammation. The cause-and-effect relationship of how the ozone is created in the body and what it does is still under consideration and still subject to various interpretations, since other body chemical processes can trigger some of the same reactions. There is evidence linking the antibody-catalyzed water-oxidation pathway of the human immune response to the production of ozone. In this system, ozone is produced by antibody-catalyzed production of trioxidane from water and neutrophil-produced singlet oxygen.^[120]

When inhaled, ozone reacts with compounds lining the lungs to form specific, cholesterol-derived metabolites that are thought to facilitate the build-up and pathogenesis of atherosclerotic plaques (a form of heart disease). These metabolites have been confirmed as naturally occurring in human atherosclerotic arteries and are categorized into a class of secosterols termed atheronals, generated by ozonolysis of cholesterol's double bond to form a 5,6 secosterol^[121] as well as a secondary condensation product via aldolization.^[122]

Impact on plant growth and crop yields

Ozone has been implicated to have an adverse effect on plant growth: "... ozone reduced total chlorophylls, carotenoid and carbohydrate concentration, and increased 1-aminocyclopropane-1-carboxylic acid (ACC) content and ethylene production. In treated plants, the ascorbate leaf pool was decreased, while lipid peroxidation and solute leakage were significantly higher than in ozone-free controls. The data indicated that ozone triggered protective mechanisms against oxidative stress in citrus."^[123] Studies that have used pepper plants as a model have shown that ozone decreased fruit yield and changed fruit quality.^[124][125] Furthermore, it was also observed a decrease in chlorophylls levels and antioxidant defences on the leaves, as well as increased the reactive oxygen species (ROS) levels and lipid and protein damages.^[124][125]

A 2022 study concludes that East Asia loses 63 billion dollars in crops per year due to ozone pollution, a byproduct of fossil fuel combustion. China loses about one-third of its potential wheat production and one-fourth of its rice production.^[126][127]

Safety regulations

Because of the strongly oxidizing properties of ozone, ozone is a primary irritant, affecting especially the eyes and respiratory systems and can be hazardous at even low concentrations. The Canadian Centre for Occupation Safety and Health reports that:

Even very low concentrations of ozone can be harmful to the upper respiratory tract and the lungs. The severity of injury depends on both the concentration of ozone and the duration of exposure. Severe and permanent lung injury or death could result from even a very short-term exposure to relatively low concentrations."^[128]

To protect workers potentially exposed to ozone, U.S. Occupational Safety and Health Administration has established a permissible exposure limit (PEL) of 0.1 μmol/mol (29 CFR 1910.1000 table Z-1), calculated as an 8-hour time weighted average. Higher concentrations are especially hazardous and NIOSH has established an Immediately Dangerous to Life and Health Limit (IDLH) of 5 μmol/mol.^[129] Work environments where ozone is used or where it is likely to be produced should have adequate ventilation and it is prudent to have a monitor for ozone that will alarm if the concentration exceeds the OSHA PEL. Continuous monitors for ozone are available from several suppliers.

Elevated ozone exposure can occur on passenger aircraft, with levels depending on altitude and atmospheric turbulence.^[130] U.S. Federal Aviation Administration regulations set a limit of 250 nmol/mol with a maximum four-hour average of 100 nmol/mol.^[131] Some planes are equipped with ozone converters in the ventilation system to reduce passenger exposure.^[130]

Production

Ozone production demonstration, Fixed Nitrogen Research Laboratory, 1926

Ozone generators, or ozonators,^[132] are used to produce ozone for cleaning air or removing smoke odours in unoccupied rooms. These ozone generators can produce over 3 g of ozone per hour. Ozone often forms in nature under conditions where O₂ will not react.^[28] Ozone used in industry is measured in μmol/mol (ppm, parts per million), nmol/mol (ppb, parts per billion), μg/m³, mg/h (milligrams per hour) or weight percent. The regime of applied concentrations ranges from 1% to 5% (in air) and from 6% to 14% (in oxygen) for older generation methods. New electrolytic methods can achieve up 20% to 30% dissolved ozone concentrations in output water.

Temperature and humidity play a large role in how much ozone is being produced using traditional generation methods (such as corona discharge and ultraviolet light). Old generation methods will produce less than 50% of nominal capacity if operated with humid ambient air, as opposed to very dry air. New generators, using electrolytic methods, can achieve higher purity and dissolution through using water molecules as the source of ozone production.

Coronal discharge method

A homemade ozone generator. Ozone is produced in the corona discharge.

This is the most common type of ozone generator for most industrial and personal uses. While variations of the "hot spark" coronal discharge method of ozone production exist, including medical grade and industrial grade ozone generators, these units usually work by means of a corona discharge tube or ozone plate.^[133][134] They are typically cost-effective and do not require an oxygen source other than the ambient air to produce ozone concentrations of 3–6%. Fluctuations in ambient air, due to weather or other environmental conditions, cause variability in ozone production. However, they also produce nitrogen oxides as a by-product. Use of an air dryer can reduce or eliminate nitric acid formation by removing water vapor and increase ozone production. At room temperature, nitric acid will form into a vapour that is hazardous if inhaled. Symptoms can include chest pain, shortness of breath, headaches and a dry nose and throat causing a burning sensation. Use of an oxygen concentrator can further increase the ozone production and further reduce the risk of nitric acid formation by removing not only the water vapor, but also the bulk of the nitrogen.

Ultraviolet light

See also: Photochemistry

UV ozone generators, or vacuum-ultraviolet (VUV) ozone generators, employ a light source that generates a narrow-band ultraviolet light, a subset of that produced by the Sun. The Sun's UV sustains the ozone layer in the stratosphere of Earth.^[135]

UV ozone generators use ambient air for ozone production, no air prep systems are used (air dryer or oxygen concentrator), therefore these generators tend to be less expensive. However, UV ozone generators usually produce ozone with a concentration of about 0.5% or lower which limits the potential ozone production rate. Another disadvantage of this method is that it requires the ambient air (oxygen) to be exposed to the UV source for a longer amount of time, and any gas that is not exposed to the UV source will not be treated. This makes UV generators impractical for use in situations that deal with rapidly moving air or water streams (in-duct air sterilization, for example). Production of ozone is one of the potential dangers of ultraviolet germicidal irradiation. VUV ozone generators are used in swimming pools and spa applications ranging to millions of gallons of water. VUV ozone generators, unlike corona discharge generators, do not produce harmful nitrogen by-products and also unlike corona discharge systems, VUV ozone generators work extremely well in humid air environments. There is also not normally a need for expensive off-gas mechanisms, and no need for air driers or oxygen concentrators which require extra costs and maintenance.

Cold plasma

In the cold plasma method, pure oxygen gas is exposed to a plasma created by DBD. The diatomic oxygen is split into single atoms, which then recombine in triplets to form ozone. It is common in the industry to mislabel some DBD ozone generators as CD Corona Discharge generators. Typically all solid flat metal electrode ozone generators produce ozone using the dielectric barrier discharge method. Cold plasma machines use pure oxygen as the input source and produce a maximum concentration of about 24% ozone. They produce far greater quantities of ozone in a given time compared to ultraviolet production that has about 2% efficiency. The discharges manifest as filamentary transfer of electrons (micro discharges) in a gap between two electrodes. In order to evenly distribute the micro discharges, a dielectric insulator must be used to separate the metallic electrodes and to prevent arcing.

Electrolytic

Electrolytic ozone generation (EOG) splits water molecules into H₂, O₂, and O₃. In most EOG methods, the hydrogen gas will be removed to leave oxygen and ozone as the only reaction products. Therefore, EOG can achieve higher dissolution in water without other competing gases found in corona discharge method, such as nitrogen gases present in ambient air. This method of generation can achieve concentrations of 20–30% and is independent of air quality because water is used as the source material. Production of ozone electrolytically is typically unfavorable because of the high overpotential required to produce ozone as compared to oxygen. This is why ozone is not produced during typical water electrolysis. However, it is possible to increase the overpotential of oxygen by careful catalyst selection such that ozone is preferentially produced under electrolysis. Catalysts typically chosen for this approach are lead dioxide^[136] or boron-doped diamond.^[137]

The ozone to oxygen ratio is improved by increasing current density at the anode, cooling the electrolyte around the anode close to 0 °C, using an acidic electrolyte (such as dilute sulfuric acid) instead of a basic solution, and by applying pulsed current instead of DC.^[138]

Special considerations

Ozone cannot be stored and transported like other industrial gases (because it quickly decays into diatomic oxygen) and must therefore be produced on site. Available ozone generators vary in the arrangement and design of the high-voltage electrodes. At production capacities higher than 20 kg per hour, a gas/water tube heat-exchanger may be utilized as ground electrode and assembled with tubular high-voltage electrodes on the gas-side. The regime of typical gas pressures is around 2 bars (200 kPa) absolute in oxygen and 3 bars (300 kPa) absolute in air. Several megawatts of electrical power may be installed in large facilities, applied as single phase AC current at 50 to 8000 Hz and peak voltages between 3,000 and 20,000 volts. Applied voltage is usually inversely related to the applied frequency.

The dominating parameter influencing ozone generation efficiency is the gas temperature, which is controlled by cooling water temperature and/or gas velocity. The cooler the water, the better the ozone synthesis. The lower the gas velocity, the higher the concentration (but the lower the net ozone produced). At typical industrial conditions, almost 90% of the effective power is dissipated as heat and needs to be removed by a sufficient cooling water flow.

Because of the high reactivity of ozone, only a few materials may be used like stainless steel (quality 316L), titanium, aluminium (as long as no moisture is present), glass, polytetrafluorethylene, or polyvinylidene fluoride. Viton may be used with the restriction of constant mechanical forces and absence of humidity (humidity limitations apply depending on the formulation). Hypalon may be used with the restriction that no water comes in contact with it, except for normal atmospheric levels. Embrittlement or shrinkage is the common mode of failure of elastomers with exposure to ozone. Ozone cracking is the common mode of failure of elastomer seals like O-rings.

Silicone rubbers are usually adequate for use as gaskets in ozone concentrations below 1 wt%, such as in equipment for accelerated aging of rubber samples.

Incidental production

Ozone may be formed from O
₂ by electrical discharges and by action of high energy electromagnetic radiation. Unsuppressed arcing in electrical contacts, motor brushes, or mechanical switches breaks down the chemical bonds of the atmospheric oxygen surrounding the contacts [O
₂ → 2O]. Free radicals of oxygen in and around the arc recombine to create ozone [O
₃].^[139] Certain electrical equipment generate significant levels of ozone. This is especially true of devices using high voltages, such as ionic air purifiers, laser printers, photocopiers, tasers and arc welders. Electric motors using brushes can generate ozone from repeated sparking inside the unit. Large motors that use brushes, such as those used by elevators or hydraulic pumps, will generate more ozone than smaller motors.

Ozone is similarly formed in the Catatumbo lightning storms phenomenon on the Catatumbo River in Venezuela, though ozone's instability makes it dubious that it has any effect on the ozonosphere.^[140] It is the world's largest single natural generator of ozone, lending calls for it to be designated a UNESCO World Heritage Site.^[141]

Laboratory production

A laboratory method for the preparation of ozone by using Siemen's Ozoniser.

In the laboratory, ozone can be produced by electrolysis using a 9 volt battery, a pencil graphite rod cathode, a platinum wire anode and a 3 molar sulfuric acid electrolyte.^[142] The half cell reactions taking place are:

${\displaystyle {\begin{aligned}&{\ce {3 H2O -> O3 + 6 H+ + 6 e-}}&&(\Delta E^{\circ }=-{\text{1.53 V}})\\&{\ce {6 H+ + 6 e- -> 3 H2}}&&(\Delta E^{\circ }={\text{0 V}})\\&{\ce {2 H2O -> O2 + 4 H+ + 4 e-}}&&(\Delta E^{\circ }={\text{1.23 V}})\end{aligned}}}$

where E° represents the standard electrode potential.

In the net reaction, three equivalents of water are converted into one equivalent of ozone and three equivalents of hydrogen. Oxygen formation is a competing reaction.

It can also be generated by a high voltage arc. In its simplest form, high voltage AC, such as the output of a neon-sign transformer is connected to two metal rods with the ends placed sufficiently close to each other to allow an arc. The resulting arc will convert atmospheric oxygen to ozone.

It is often desirable to contain the ozone. This can be done with an apparatus consisting of two concentric glass tubes sealed together at the top with gas ports at the top and bottom of the outer tube. The inner core should have a length of metal foil inserted into it connected to one side of the power source. The other side of the power source should be connected to another piece of foil wrapped around the outer tube. A source of dry O
₂ is applied to the bottom port. When high voltage is applied to the foil leads, electricity will discharge between the dry dioxygen in the middle and form O
₃ and O
₂ which will flow out the top port. This is called a Siemen's ozoniser. The reaction can be summarized as follows:^[28]

${\displaystyle {\ce {3O2->[{\text{electricity}}]2O3}}}$

Applications

Industry

The largest use of ozone is in the preparation of pharmaceuticals, synthetic lubricants, and many other commercially useful organic compounds, where it is used to sever carbon-carbon bonds.^[28] It can also be used for bleaching substances and for killing microorganisms in air and water sources.^[143] Many municipal drinking water systems kill bacteria with ozone instead of the more common chlorine.^[144] Ozone has a very high oxidation potential.^[145] Ozone does not form organochlorine compounds, nor does it remain in the water after treatment. Ozone can form the suspected carcinogen bromate in source water with high bromide concentrations. The U.S. Safe Drinking Water Act mandates that these systems introduce an amount of chlorine to maintain a minimum of 0.2 μmol/mol residual free chlorine in the pipes, based on results of regular testing. Where electrical power is abundant, ozone is a cost-effective method of treating water, since it is produced on demand and does not require transportation and storage of hazardous chemicals. Once it has decayed, it leaves no taste or odour in drinking water.

Although low levels of ozone have been advertised to be of some disinfectant use in residential homes, the concentration of ozone in dry air required to have a rapid, substantial effect on airborne pathogens exceeds safe levels recommended by the U.S. Occupational Safety and Health Administration and Environmental Protection Agency. Humidity control can vastly improve both the killing power of the ozone and the rate at which it decays back to oxygen (more humidity allows more effectiveness). Spore forms of most pathogens are very tolerant of atmospheric ozone in concentrations at which asthma patients start to have issues.

In 1908 artificial ozonisation of the Central Line of the London Underground was introduced for aerial disinfection. The process was found to be worthwhile, but was phased out by 1956. However the beneficial effect was maintained by the ozone created incidentally from the electrical discharges of the train motors (see above: Incidental production).^[146]

Ozone generators were made available to schools and universities in Wales for the Autumn term 2021, to disinfect classrooms after COVID-19 outbreaks.^[147]

Industrially, ozone is used to:

• Disinfect laundry in hospitals, food factories, care homes etc.;^[148]
• Disinfect water in place of chlorine^[28]
• Deodorize air and objects, such as after a fire. This process is extensively used in fabric restoration
• Kill bacteria on food or on contact surfaces;^[149]
• Water intense industries such as breweries and dairy plants can make effective use of dissolved ozone as a replacement to chemical sanitizers such as peracetic acid, hypochlorite or heat.
• Disinfect cooling towers and control Legionella with reduced chemical consumption, water bleed-off and increased performance.
• Sanitize swimming pools and spas
• Kill insects in stored grain^[150]
• Scrub yeast and mold spores from the air in food processing plants;
• Wash fresh fruits and vegetables to kill yeast, mold and bacteria;^[149]
• Chemically attack contaminants in water (iron, arsenic, hydrogen sulfide, nitrites, and complex organics lumped together as "colour");
• Provide an aid to flocculation (agglomeration of molecules, which aids in filtration, where the iron and arsenic are removed);
• Manufacture chemical compounds via chemical synthesis^[151]
• Clean and bleach fabrics (the former use is utilized in fabric restoration; the latter use is patented);^[152]
• Act as an antichlor in chlorine-based bleaching;
• Assist in processing plastics to allow adhesion of inks;
• Age rubber samples to determine the useful life of a batch of rubber;
• Eradicate water-borne parasites such as Giardia lamblia and Cryptosporidium in surface water treatment plants.

Ozone is a reagent in many organic reactions in the laboratory and in industry. Ozonolysis is the cleavage of an alkene to carbonyl compounds.

Many hospitals around the world use large ozone generators to decontaminate operating rooms between surgeries. The rooms are cleaned and then sealed airtight before being filled with ozone which effectively kills or neutralizes all remaining bacteria.^[153]

Ozone is used as an alternative to chlorine or chlorine dioxide in the bleaching of wood pulp.^[154] It is often used in conjunction with oxygen and hydrogen peroxide to eliminate the need for chlorine-containing compounds in the manufacture of high-quality, white paper.^[155]

Ozone can be used to detoxify cyanide wastes (for example from gold and silver mining) by oxidizing cyanide to cyanate and eventually to carbon dioxide.^[156]

Water disinfection

Since the invention of Dielectric Barrier Discharge (DBD) plasma reactors, it has been employed for water treatment with ozone.^[157] However, with cheaper alternative disinfectants like chlorine, such applications of DBD ozone water decontamination have been limited by high power consumption and bulky equipment.^[158][159] Despite this, with research revealing the negative impacts of common disinfectants like chlorine with respect to toxic residuals and ineffectiveness in killing certain micro-organisms,^[160] DBD plasma-based ozone decontamination is of interest in current available technologies. Although ozonation of water with a high concentration of bromide does lead to the formation of undesirable brominated disinfection byproducts, unless drinking water is produced by desalination, ozonation can generally be applied without concern for these byproducts.^{[159][161][162][163]} Advantages of ozone include high thermodynamic oxidation potential, less sensitivity to organic material and better tolerance for pH variations while retaining the ability to kill bacteria, fungi, viruses, as well as spores and cysts.^{[164][165][166]} Although, ozone has been widely accepted in Europe for decades, it is sparingly used for decontamination in the U.S. due to limitations of high-power consumption, bulky installation and stigma attached with ozone toxicity.^[158][167] Considering this, recent research efforts have been directed towards the study of effective ozone water treatment systems.^[168] Researchers have looked into lightweight and compact low power surface DBD reactors,^[169][170] energy efficient volume DBD reactors^[171] and low power micro-scale DBD reactors.^[172][173] Such studies can help pave the path to re-acceptance of DBD plasma-based ozone decontamination of water, especially in the U.S.

Consumers

See also: Air purifier § Potential ozone hazards

Ozone levels which are safe for people are ineffective at killing fungi and bacteria.^[174] Some consumer disinfection and cosmetic products emit ozone at levels harmful to human health.^[174]

Devices generating high levels of ozone, some of which use ionization, are used to sanitize and deodorize uninhabited buildings, rooms, ductwork, woodsheds, boats and other vehicles.

Ozonated water is used to launder clothes and to sanitize food, drinking water, and surfaces in the home. According to the U.S. Food and Drug Administration (FDA), it is "amending the food additive regulations to provide for the safe use of ozone in gaseous and aqueous phases as an antimicrobial agent on food, including meat and poultry." Studies at California Polytechnic University demonstrated that 0.3 μmol/mol levels of ozone dissolved in filtered tapwater can produce a reduction of more than 99.99% in such food-borne microorganisms as salmonella, E. coli 0157:H7 and Campylobacter. This quantity is 20,000 times the WHO-recommended limits stated above.^[149][175] Ozone can be used to remove pesticide residues from fruits and vegetables.^[176][177]

Ozone is used in homes and hot tubs to kill bacteria in the water and to reduce the amount of chlorine or bromine required by reactivating them to their free state. Since ozone does not remain in the water long enough, ozone by itself is ineffective at preventing cross-contamination among bathers and must be used in conjunction with halogens. Gaseous ozone created by ultraviolet light or by corona discharge is injected into the water.^[178]

Ozone is also widely used in the treatment of water in aquariums and fishponds. Its use can minimize bacterial growth, control parasites, eliminate transmission of some diseases, and reduce or eliminate "yellowing" of the water. Ozone must not come in contact with fishes' gill structures. Natural saltwater (with life forms) provides enough "instantaneous demand" that controlled amounts of ozone activate bromide ions to hypobromous acid, and the ozone entirely decays in a few seconds to minutes. If oxygen-fed ozone is used, the water will be higher in dissolved oxygen and fishes' gill structures will atrophy, making them dependent on oxygen-enriched water.

Aquaculture

"Ozonation" redirects here. For the chemical reaction, see ozonolysis.

Ozonation – a process of infusing water with ozone – can be used in aquaculture to facilitate organic breakdown. Ozone is also added to recirculating systems to reduce nitrite levels^[179] through conversion into nitrate. If nitrite levels in the water are high, nitrites will also accumulate in the blood and tissues of fish, where it interferes with oxygen transport (it causes oxidation of the heme-group of haemoglobin from ferrous (Fe²⁺
) to ferric (Fe³⁺
), making haemoglobin unable to bind O
₂).^[180] Despite these apparent positive effects, ozone use in recirculation systems has been linked to reducing the level of bioavailable iodine in salt water systems, resulting in iodine deficiency symptoms such as goitre and decreased growth in Senegalese sole (Solea senegalensis) larvae.^[181]

Ozonate seawater is used for surface disinfection of haddock and Atlantic halibut eggs against nodavirus. Nodavirus is a lethal and vertically transmitted virus which causes severe mortality in fish. Haddock eggs should not be treated with high ozone level as eggs so treated did not hatch and died after 3–4 days.^[182]

Agriculture

Ozone application on freshly cut pineapple and banana shows increase in flavonoids and total phenol contents when exposure is up to 20 minutes. Decrease in ascorbic acid (one form of vitamin C) content is observed but the positive effect on total phenol content and flavonoids can overcome the negative effect.^[183] Tomatoes upon treatment with ozone show an increase in β-carotene, lutein and lycopene.^[184] However, ozone application on strawberries in pre-harvest period shows decrease in ascorbic acid content.^[185]

Ozone facilitates the extraction of some heavy metals from soil using EDTA. EDTA forms strong, water-soluble coordination compounds with some heavy metals (Pb, Zn) thereby making it possible to dissolve them out from contaminated soil. If contaminated soil is pre-treated with ozone, the extraction efficacy of Pb, Am and Pu increases by 11.0–28.9%,^[186] 43.5%^[187] and 50.7%^[187] respectively.

Effect on pollinators

Crop pollination is an essential part of an ecosystem. Ozone can have detrimental effects on plant-pollinator interactions.^[188] Pollinators carry pollen from one plant to another. This is an essential cycle inside of an ecosystem. Causing changes in certain atmospheric conditions around pollination sites or with xenobiotics could cause unknown changes to the natural cycles of pollinators and flowering plants. In a study conducted in North-Western Europe, crop pollinators were negatively affected more when ozone levels were higher.^[189]

Alternative medicine

See also: Ozone therapy

The use of ozone for the treatment of medical conditions is not supported by high quality evidence, and is generally considered alternative medicine.^[190]

See also

• Chappuis absorption
• Cyclic ozone
• Global Ozone Monitoring by Occultation of Stars (GOMOS)
• International Day for the Preservation of the Ozone Layer (September 16)
• Lightning
• Nitrogen oxides
• Ozone depletion, including the phenomenon known as the ozone hole.
• Ozone Monitor
• Ozone Monitoring Instrument
• Ozone therapy
• Ozoneweb
• Ozonide (ion)
• Ozonolysis
• Polymer degradation
• Sterilization (microbiology)

References

Footnotes

1. This vapor pressure is for the critical temperature, which is below room temperature.
2. This includes Adams, Arapahoe, Boulder, Broomfield, Denver, Douglas, Jefferson, and parts of Larimer and Weld counties.

Citations

1. NIOSH Pocket Guide to Chemical Hazards. "#0476". National Institute for Occupational Safety and Health (NIOSH).
2. Gas Encyclopedia; Ozone
3. Cuthbertson, Clive; Cuthbertson, Maude (1914). "On the Refraction and Dispersion of the Halogens, Halogen Acids, Ozone, Steam Oxides of Nitrogen, and Ammonia". Philosophical Transactions of the Royal Society A. 213 (497–508): 1–26. Bibcode:1914RSPTA.213....1C. doi:10.1098/rsta.1914.0001. Retrieved 4 February 2016.
4. "Ozone". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
5. Streng, A. G. (1961). "Tables of Ozone Properties". Journal of Chemical & Engineering Data. 6 (3): 431–436. doi:10.1021/je00103a031.
6. Batakliev, Todor; Georgiev, Vladimir; Anachkov, Metody; Rakovsky, Slavcho; Zaikov, Gennadi E. (June 2014). "Ozone decomposition". Interdisciplinary Toxicology. 7 (2): 47–59. doi:10.2478/intox-2014-0008. ISSN 1337-6853. PMC 4427716. PMID 26109880.
7. "ozone (n.)". Online Etymological Dictionary. Merriam-Webster. Retrieved 24 May 2023.
8. Toth, Gary; Hillger, Don. "Precursor Era Contributors to Meteorology". colostate.edu.
9. "electrochemical reaction | Definition, Process, Types, Examples, & Facts | Britannica". www.britannica.com. Retrieved 2022-09-24.
10. Rubin, Mordecai B. (2001). "The History of Ozone: The Schönbein Period, 1839–1868" (PDF). Bull. Hist. Chem. 26 (1): 40–56. Archived from the original (PDF) on 2008-04-11. Retrieved 2008-02-28.
11. "Scientists born on October 18th". Today in Science History.
12. Jacewicz, Natalie (2017). "A Killer of a Cure". Distillations. 3 (1): 34–37. Retrieved April 13, 2018.
13. Le Prestre, Philippe G., ed. (1998). Protecting the ozone layer: lessons, models, and prospects; [product of the Tenth Anniversary Colloquium of the Montreal Protocol, held on September 13, 1997; part of a series of events held in Montreal to mark the 10th anniversary of the signing of the Montreal Protocol on Substances that Deplete the Ozone Layer, September 16, 1987]. Boston: Kluwer. p. 2. ISBN 978-0-7923-8245-4.
14. Schönbein, Christian Friedrich (1840). "Research on the nature of the odour in certain chemical reactions". Letter to the Académie des Sciences in Paris.
15. Jacques-Louis Soret (1865). "Recherches sur la densité de l'ozone". Comptes rendus de l'Académie des sciences. 61: 941.
16. "Ozone FAQ". Global Change Master Directory. Archived from the original on 2006-06-01. Retrieved 2006-05-10.
17. Redlands Chamber of Commerce Collection, City Archives, A.K. Smiley Public Library, Redlands, CA
18. Henry Henshaw to William Brewster, July 2, 1902, Harvard Museum of Comparative Zoology Archives.
19. O'Connell, Sanjida (18 August 2009). "The science behind that fresh seaside smell". The Telegraph. Archived from the original on 2022-01-12.
20. "Secrets of 'bracing' sea air bottled by scientists". www.telegraph.co.uk. 2 February 2007. Retrieved 2022-05-13.
21. Anstie, Francis (1874). "Clinic of the Month: Dr. McKendrick on Ozone". The Practitioner: A Journal of Therapeutics and Public Health. 12 (January–June): 123.
22. Rubin, Mordecai B. (2001). "THE HISTORY OF OZONE. THE SCHÖNBEIN PERIOD, 1839–1868" (PDF). Bulletin for the History of Chemistry. 26 (1): 48. Retrieved 13 April 2018.
23. Hill, L.; Flack, M. (28 December 1911). "The Physiological Influence of Ozone". Proceedings of the Royal Society B: Biological Sciences. 84 (573): 404–415. Bibcode:1911RSPSB..84..404H. doi:10.1098/rspb.1911.0086.
24. Stoker, George (1916). "The Surgical Uses of Ozone". Lancet. 188 (4860): 712. doi:10.1016/S0140-6736(01)31717-8.
25. Rubin, Mordecai B. (2004). "The History of Ozone. IV. The Isolation of Pure Ozone and Determination of its Physical Properties (1)" (PDF). Bull. Hist. Chem. 29 (2): 99–106. Retrieved 2021-04-12.
26. Block, J. H. (1986), Vanselow, R.; Howe, R. (eds.), "Georg-Maria Schwab: Early Endeavours in the Science of Catalysis", Chemistry and Physics of Solid Surfaces VI, Springer Series in Surface Sciences, vol. 5, Berlin, Heidelberg: Springer, pp. 1–8, doi:10.1007/978-3-642-82727-3_1, ISBN 978-3-642-82727-3
27. "Oxygen". WebElements. Retrieved 2006-09-23.
28. Brown, Theodore L.; LeMay, H. Eugene Jr.; Bursten, Bruce E.; Burdge, Julia R. (2003) [1977]. "22". In Nicole Folchetti (ed.). Chemistry: The Central Science (9th ed.). Pearson Education. pp. 882–883. ISBN 978-0-13-066997-1.
29. Cotton, F. Albert; Wilkinson, Geoffrey (1988). Advanced Inorganic Chemistry (5th ed.). John Wiley & Sons. p. 452. ISBN 0-471-84997-9. Ozone. The diamagnetic triatomic molecule ...
30. "Microwave Rotational Spectroscopy". Chemistry LibreTexts. 2013-10-02. Retrieved 2022-07-13.
31. Tanaka, Takehiko; Morino, Yonezo (1970). "Coriolis interaction and anharmonic potential function of ozone from the microwave spectra in the excited vibrational states". Journal of Molecular Spectroscopy. 33 (3): 538–551. Bibcode:1970JMoSp..33..538T. doi:10.1016/0022-2852(70)90148-7.
32. Mack, Kenneth M.; Muenter, J. S. (1977). "Stark and Zeeman properties of ozone from molecular beam spectroscopy". Journal of Chemical Physics. 66 (12): 5278–5283. Bibcode:1977JChPh..66.5278M. doi:10.1063/1.433909.
33. Half-life time of ozone as a function of air conditions and movement McClurkin, J.D.*#1, Maier, D.E.2. doi:10.5073/jka.2010.425.167.326
34. Koike, K; Nifuku, M; Izumi, K; Nakamura, S; Fujiwara, S; Horiguchi, S (2005). "Explosion properties of highly concentrated ozone gas" (PDF). Journal of Loss Prevention in the Process Industries. 18 (4–6): 465. Bibcode:2005JLPPI..18..465K. doi:10.1016/j.jlp.2005.07.020. Archived from the original (PDF) on 2009-03-27.
35. "Electrochemical Production of High-Concentration Ozone-Water Using Freestanding Perforated Diamond Electrodes".
36. Harris, Daniel C. (2007). Quantitative Chemical Analysis. W. H. Freeman. pp. 279. ISBN 978-0-7167-7694-9.
37. Bailey, P. S. (1982). "Chapter 2". Ozonation in Organic Chemistry. Vol. 2. New York, NY: Academic Press. ISBN 978-0-12-073102-2.
38. Solomons, T.W. Graham & Fryhle, Craig B. (2008). "Chapter 8 Alkenes and Alkynes – Part II: Addition Reactions and Synthesis". Organic Chemistry, 9th Edition. Wiley. p. 344. ISBN 978-0-470-16982-7.
39. Al-Baarri, A. N.; Legowo, A. M.; Abduh, S. B. M.; Mawarid, A. A.; Farizha, K. M.; Silvia, M. (June 2019). "Production of Ozone and the Simple Detection using Potassium Iodide Titration Method". IOP Conference Series: Earth and Environmental Science. 292 (1): 012062. Bibcode:2019E&ES..292a2062A. doi:10.1088/1755-1315/292/1/012062. ISSN 1755-1315. S2CID 198344024.
40. Horvath M.; Bilitzky L.; Huttner J. (1985). Ozone. Elsevier. pp. 44–49. ISBN 978-0-444-99625-1.
41. Menzel, D. B. (1984). "Ozone: an overview of its toxicity in man and animals". Journal of Toxicology and Environmental Health. 13 (2–3): 183–204. Bibcode:1984JTEH...13..181M. doi:10.1080/15287398409530493. ISSN 0098-4108. PMID 6376815.
42. "Ozone Generators that are Sold as Air Cleaners". EPA. United States Environmental Protection Agency. 28 February 2022. Archived from the original on 9 February 2022. Retrieved 28 February 2022.
43. Roca Sánchez, Anna (2015-09-01). Estudio cinético de la descomposición catalítica de ozono (Thesis).
44. Batakliev, Todor; Georgiev, Vladimir; Anachkov, Metody; Rakovsky, Slavcho; Zaikov, Gennadi E. (June 2014). "Ozone decomposition". Interdisciplinary Toxicology. 7 (2): 47–59. doi:10.2478/intox-2014-0008. ISSN 1337-6853. PMC 4427716. PMID 26109880.
45. Housecroft, C. E.; Sharpe, A. G. (2004). Inorganic Chemistry (2nd ed.). Prentice Hall. p. 439. ISBN 978-0-13-039913-7.
46. Housecroft, C. E.; Sharpe, A. G. (2004). Inorganic Chemistry (2nd ed.). Prentice Hall. p. 265. ISBN 978-0-13-039913-7.
47. Horvath M.; Bilitzky L.; Huttner J. (1985). Ozone. Elsevier. pp. 259, 269–270. ISBN 978-0-444-99625-1.
48. Shimanouchi, T. (1972). "Ozone". NIST: National Institute of Standards and Technology. 6 (3). U.S. Department of Commerce: 993–1102.
49. World Meteorological Organization. "Chapter 16: Measurement of Ozone" (PDF). Part I: Measurement of Meteorological Variables. Archived from the original (PDF) on 31 March 2016.
50. Max Planck Institute – Mainz. "The MPI-Mainz UV/VIS Spectral Atlas of Gaseous Molecules of Atmospheric Interest".
51. "Measured Ozone Depletion". Ozone-Information.com. Archived from the original on 2013-09-14. Retrieved 2014-01-22.
52. Hultman, G. Eric (1980-01-01). The Ozone Survival Manual. McGraw-Hill. ISBN 978-0-915498-73-4.
53. Keller-Rudek, Hannelore. "The MPI-Mainz UV/VIS Spectral Atlas of Gaseous Molecules of Atmospheric Interest: O2, Lyman-alpha". Archived from the original on 2015-11-17.
54. Matsumi, Yutaka; Kawasaki, Masahiro (2003). "Photolysis of Atmospheric Ozone in the Ultraviolet Region". Chemical Reviews. 103 (12): 4767–82. doi:10.1021/cr0205255. PMID 14664632. See the graphical absorption of ozone in two of its absorption bands, as a function of wavelength.
55. Health Aspects of Air Pollution with Particulate Matter, Ozone and Nitrogen Dioxide Archived 2012-04-14 at the Wayback Machine. WHO-Europe report 13–15 January 2003 (PDF)
56. Stevenson; et al. (2006). "Multimodel ensemble simulations of present-day and near-future tropospheric ozone". American Geophysical Union. Archived from the original on 2011-11-04. Retrieved 2006-09-16.
57. "Rising Ozone Levels Pose Challenge to U.S. Soybean Production, Scientists Say". NASA Earth Observatory. 2003-07-31. Archived from the original on 2010-03-16. Retrieved 2006-05-10.
58. Mutters, Randall (March 1999). "Statewide Potential Crop Yield Losses From Ozone Exposure". California Air Resources Board. Archived from the original on 2004-02-17. Retrieved 2006-05-10.
59. Rethinking the Ozone Problem in Urban and Regional Air Pollution. 1991-01-01. doi:10.17226/1889. ISBN 978-0-309-04631-2.
60. Sharma, Sumit; Sharma, Prateek; Khare, Mukesh; Kwatra, Swati (May 2016). "Statistical behavior of ozone in urban environment". Sustainable Environment Research. 26 (3): 142–148. Bibcode:2016SuEnR..26..142S. doi:10.1016/j.serj.2016.04.006.
61. Diem, Jeremy E.; Stauber, Christine E.; Rothenberg, Richard (2017-05-16). Añel, Juan A. (ed.). "Heat in the southeastern United States: Characteristics, trends, and potential health impact". PLOS ONE. 12 (5): e0177937. Bibcode:2017PLoSO..1277937D. doi:10.1371/journal.pone.0177937. ISSN 1932-6203. PMC 5433771. PMID 28520817.
62. Hou, Pei; Wu, Shiliang (July 2016). "Long-term Changes in Extreme Air Pollution Meteorology and the Implications for Air Quality". Scientific Reports. 6 (1): 23792. Bibcode:2016NatSR...623792H. doi:10.1038/srep23792. ISSN 2045-2322. PMC 4815017. PMID 27029386.
63. Tessum, Christopher W.; Apte, Joshua S.; Good kind, Andrew L.; Muller, Nicholas Z.; Mullins, Kimberley A.; Paolella, David A.; Polasky, Stephen; Springer, Nathaniel P.; Thakrar, Sumil K. (2019-03-11). "Inequity in consumption of goods and services adds to racial–ethnic disparities in air pollution exposure". Proceedings of the National Academy of Sciences. 116 (13): 6001–6006. Bibcode:2019PNAS..116.6001T. doi:10.1073/pnas.1818859116. ISSN 0027-8424. PMC 6442600. PMID 30858319.
64. American Lung Association. (n.d.). How healthy is the air you breathe? Retrieved March 20, 2019, from lung.org
65. "History of ozone in Colorado". Colorado Department of Public Health & Environment. Retrieved 2023-04-18.
66. Evans, Jason M.; Helmig, Detlev (February 2017). "Investigation of the influence of transport from oil and natural gas regions on elevated ozone levels in the northern Colorado front range". Journal of the Air & Waste Management Association. 67 (2): 196–211. Bibcode:2017JAWMA..67..196E. doi:10.1080/10962247.2016.1226989. ISSN 1096-2247. PMID 27629587.
67. Colorado Department of Public Health and Environment, Regional Air Quality Council, & North Front Range Metropolitan Planning Organization. "Colorado Ozone Action Plan" (PDF). Retrieved 2019-03-21.
68. Colorado Department of Public Health and Environment. (n.d.). Colorado Air Quality. Retrieved March 20, 2019, from https://www.colorado.gov/airquality/air_quality.aspx
69. Layer, Robert W.; Lattimer, Robert P. (July 1990). "Protection of Rubber against Ozone". Rubber Chemistry and Technology. 63 (3): 426–450. doi:10.5254/1.3538264.
70. Yu, Xinyuan; Fiore, Arlene M.; Santer, Benjamin D.; Correa, Gustavo P.; et al. (2 August 2024). "Anthropogenic Fingerprint Detectable in Upper Tropospheric Ozone Trends Retrieved from Satellite". Environmental Science and Technology: Fig. 1. doi:10.1021/acs.est.4c01289. PMC 11325641. Further explained by Chu, Jennifer (2 August 2024). "Scientists find a human 'fingerprint' in the upper troposphere's increasing ozone". Phys.org. Archived from the original on 2 August 2024.
71. "Tropospheric Ozone in EU – The consolidated report". European Environmental Agency. 1998. Retrieved 2006-05-10.
72. "Atmospheric Chemistry and Greenhouse Gases". Intergovernmental Panel on Climate Change. Archived from the original on 2006-07-10. Retrieved 2006-05-10.
73. "Climate Change 2001". Intergovernmental Panel on Climate Change. 2001. Archived from the original on 2006-09-13. Retrieved 2006-09-12.
74. Life Cycle Assessment Methodology Sufficient to Support Public Declarations and Claims, Committee Draft Standard, Version 2.1. Scientific Certification Systems, February 2011. Annex B, Section 4.
75. NASA GODDARD HOMEPAGE FOR TROPOSPHERIC OZONE NASA Goddard Space Flight Center Code 613.3, Chemistry and Dynamics Branch. Acdb-ext.gsfc.nasa.gov (2006-09-20). Retrieved on 2012-02-01.
76. Liu, Wei; Hegglin, Michaela I.; Checa-Garcia, Ramiro; Li, Shouwei; Gillett, Nathan P.; Lyu, Kewei; Zhang, Xuebin; Swart, Neil C. (April 2022). "Stratospheric ozone depletion and tropospheric ozone increases drive Southern Ocean interior warming". Nature Climate Change. 12 (4): 365–372. Bibcode:2022NatCC..12..365L. doi:10.1038/s41558-022-01320-w. ISSN 1758-6798. S2CID 247844868.
    Lay summary report: "Ozone may be heating the planet more than we realize". University of Reading. Retrieved 19 April 2022.
77. Stewart, D. R.; Saunders, E.; Perea, R. A.; Fitzgerald, R.; Campbell, D. E.; Stockwell, W. R. (13 November 2017). "Linking Air Quality and Human Health Effects Models: An Application to the Los Angeles Air Basin". Environmental Health Insights. 11: 1178630217737551. Bibcode:2017EnvHI..1173755S. doi:10.1177/1178630217737551. PMC 5692127. PMID 29162976.
78. US EPA, OAR (5 June 2015). "Health Effects of Ozone Pollution". US EPA.
79. US EPA, OAR (2015-05-29). "Ground-level Ozone Basics". US EPA. Retrieved 2020-11-26.
80. American Lung Association Scientific and Medical Editorial Review Panel. "Ozone". American Lung Association. Retrieved 24 March 2019.
81. Jule, Y.; Michaudel, C.; Fauconnier, L.; Togbe, D.; Riffel, B. (2018). "Ozone-induced acute and chronic alterations in the lung in mice: a combined digital imaging and functional analysis". European Respiratory Journal. 52: 4313.
82. Burnett, R. T.; Brook, J. R.; Yung, W. T.; Dales, R. E.; Krewski, D. (1997). "Association between ozone and hospitalization for respiratory diseases in 16 Canadian cities". Environmental Research. 72 (1): 24–31. Bibcode:1997ER.....72...24B. doi:10.1006/enrs.1996.3685. PMID 9012369.
83. Desqueyroux, H.; Pujet, J. C.; Prosper, M.; Squinazi, F.; Momas, I. (2002). "Short-term effects of low-level air pollution on respiratory health of adults suffering from moderate to severe asthma". Environmental Research. 89 (1): 29–37. Bibcode:2002ER.....89...29D. doi:10.1006/enrs.2002.4357. PMID 12051782.
84. Gent, J. F.; Triche, E. W.; Holford, T. R.; Belanger, K.; Bracken, M. B.; Beckett, W. S.; Leaderer, B. P. (2003). "Association of low-level ozone and fine particles with respiratory symptoms in children with asthma". JAMA. 290 (14): 1859–1867. doi:10.1001/jama.290.14.1859. PMID 14532314.
85. Al-Hegelan, M.; Tighe, R. M.; Castillo, C.; Hollingsworth, J. W. (2011). "Ambient ozone and pulmonary innate immunity". Immunol Res. 49 (1–3): 173–91. doi:10.1007/s12026-010-8180-z. PMC 3747041. PMID 21132467.
86. Informed Health Online [Internet]. Cologne, Germany: Institute for Quality and Efficiency in Health Care (IQWiG); 2006-. The innate and adaptive immune systems. 2010 Dec 7 [Updated 2016 Aug 4]. Available from https://www.ncbi.nlm.nih.gov/books/NBK279396/
87. Janeway CA Jr, Travers P, Walport M, et al. Immunobiology: The Immune System in Health and Disease. 5th edition. New York: Garland Science; 2001. The components of the immune system. Available from: https://www.ncbi.nlm.nih.gov/books/NBK27092/
88. Gold, D. R.; Litonjua, A.; Schwartz, J.; Lovett, E.; Larson, A.; Nearing, B.; Verrier, R. (2000). "Ambient pollution and heart rate variability". Circulation. 101 (11): 1267–1273. doi:10.1161/01.cir.101.11.1267. PMID 10725286.
89. Sarnat, S. E.; Suh, H. H.; Coull, B. A.; Schwartz, J.; Stone, P. H.; Gold, D. R. (2006). "Ambient particulate air pollution and cardiac arrhythmia in a panel of older adults in Steubenville, Ohio". Occupational and Environmental Medicine. 63 (10): 700–706. doi:10.1136/oem.2006.027292. PMC 2078044. PMID 16757505.
90. Brook, R. D.; Brook, J. R.; Urch, B.; Vincent, R.; Rajagopalan, S.; Silverman, F. (2002). "Inhalation of fine particulate air pollution and ozone causes acute arterial vasoconstriction in healthy adults". Circulation. 105 (13): 1534–1536. doi:10.1161/01.cir.0000013838.94747.64. PMID 11927516.
91. Zanobetti, A.; Canner, M. J.; Stone, P. H.; Schwartz, J.; Sher, D.; Eagan-Bengston, E.; Gold, D. R. (2004). "Ambient pollution and blood pressure in cardiac rehabilitation patients". Circulation. 110 (15): 2184–2189. doi:10.1161/01.cir.0000143831.33243.d8. PMID 15466639.
92. Turner, M. C.; Jerrett, M.; Pope, III; Krewski, D.; Gapstur, S. M.; Diver, W. R.; Burnett, R. T. (2016). "Long-term ozone exposure and mortality in a large prospective study". American Journal of Respiratory and Critical Care Medicine. 193 (10): 1134–1142. doi:10.1164/rccm.201508-1633oc. PMC 4872664. PMID 26680605.
93. Crouse, D. L.; Peters, P. A.; Hystad, P.; Brook, J. R.; van Donkelaar, A.; Martin, R. V.; Brauer, M. (2015). "Ambient PM2. 5, O3, and NO2 exposures and associations with mortality over 16 years of follow-up in the Canadian Census Health and Environment Cohort (CanCHEC)". Environmental Health Perspectives. 123 (11): 1180–1186. doi:10.1289/ehp.1409276. PMC 4629747. PMID 26528712.
94. Jerrett, Michael; Burnett, Richard T.; Pope, C. Arden; Ito, Kazuhiko; Thurston, George; Krewski, Daniel; Shi, Yuanli; Calle, Eugenia; Thun, Michael (2009-03-12). "Long-Term Ozone Exposure and Mortality". The New England Journal of Medicine. 360 (11): 1085–1095. doi:10.1056/NEJMoa0803894. ISSN 0028-4793. PMC 4105969. PMID 19279340.
95. Lin, S.; Liu, X.; Le, L. H.; Hwang, S. A. (2008). "Chronic exposure to ambient ozone and asthma hospital admissions among children". Environmental Health Perspectives. 116 (12): 1725–1730. doi:10.1289/ehp.11184. PMC 2599770. PMID 19079727.
96. Zu, K.; Shi, L.; Prueitt, R. L.; Liu, X.; Goodman, J. E. (2018). "Critical review of long-term ozone exposure and asthma development". Inhalation Toxicology. 30 (3): 99–113. Bibcode:2018InhTx..30...99Z. doi:10.1080/08958378.2018.1455772. PMID 29869579.
97. Malig, B. J.; Pearson, D. L.; Chang, Y. B.; Broadwin, R.; Basu, R.; Green, R. S.; Ostro, B. (2015). "A time-stratified case-crossover study of ambient ozone exposure and emergency department visits for specific respiratory diagnoses in California (2005–2008)". Environmental Health Perspectives. 124 (6): 745–753. doi:10.1289/ehp.1409495. PMC 4892911. PMID 26647366.
98. Vanwinge, C.; Gilles, C.; Gerard, C.; Blacher, S.; Noel, A.; Cataldo, D.; Rocks, N. (2017). "A Role For Ozone Pollution In Lung Cancer Progression". Am J Respir Crit Care Med. 195: A2352.
99. Ware, L. B.; Zhao, Z.; Koyama, T.; May, A. K.; Matthay, M. A.; Lurmann, F. W.; Calfee, C. S. (2016). "Long-term ozone exposure increases the risk of developing the acute respiratory distress syndrome". American Journal of Respiratory and Critical Care Medicine. 193 (10): 1143–1150. doi:10.1164/rccm.201507-1418oc. PMC 4872663. PMID 26681363.
100. EPA report on consumer ozone air purifiers. Epa.gov. Retrieved on 2012-02-01.
101. California Certified Air Cleaning Devices. From California Air Resources Board.
102. Jeannie Allen (2003-08-22). "Watching Our Ozone Weather". NASA Earth Observatory. Retrieved 2008-10-11.
103. Answer to follow-up questions from CAFE (2004) Archived 2005-09-09 at the Wayback Machine (PDF)
104. EPA Course Developers (2016-03-21). "Health Effects of Ozone in the General Population". EPA.
105. Weinhold B (2008). "Ozone nation: EPA standard panned by the people". Environ. Health Perspect. 116 (7): A302–A305. doi:10.1289/ehp.116-a302. PMC 2453178. PMID 18629332.
106. Jerrett, Michael; Burnett, Richard T.; Pope, C. Arden III; Ito, Kazuhiko; Thurston, George; Krewski, Daniel; Shi, Yuanli; Calle, Eugenia; Thun, Michael (March 12, 2009). "Long-Term Ozone Exposure and Mortality". N. Engl. J. Med. 360 (11): 1085–1095. doi:10.1056/NEJMoa0803894. PMC 4105969. PMID 19279340.
107. Wilson, Elizabeth K. (March 16, 2009). "Ozone's Health Impact". Chemical & Engineering News. 87 (11): 9. doi:10.1021/cen-v087n011.p009a.
108. Dahl, R (2006). "Ozone Overload: Current Standards May Not Protect Health". Environ. Health Perspect. 114 (4): A240. doi:10.1289/ehp.114-a240a. PMC 1440818.
109. Bell, ML; Peng, RD; Dominici, F (2006). "The exposure-response curve for ozone and risk of mortality and the adequacy of current ozone regulations". Environ. Health Perspect. 114 (4): 532–6. doi:10.1289/ehp.8816. PMC 1440776. PMID 16581541.
110. Directive 2008/50/EC. Eur-lex.europa.eu. Retrieved on 2013-01-17.
111. "DIRECTIVE 2008/50/EC on ambient air quality and cleaner air for Europe". EC. 2008-06-11. Retrieved 2010-08-23.
112. "Comments of the American Lung Association, Environmental Defense, Sierra Club on the U.S. Environmental Protection Agency's Proposed Revisions to the National Ambient Air Quality Standards for Ozone July 11, 2007 – 72 FR 37818" (PDF). Lungusa.org. Archived from the original (PDF) on July 10, 2010.
113. "Ambient (outdoor) air pollution". www.who.int. Retrieved 2020-07-31.
114. National Ambient Air Quality Standards for Ozone. Environmental Protection Agency (EPA). Proposed rule
115. "Federal Register | National Ambient Air Quality Standards for Ozone". www.federalregister.gov. 2015-10-26. Retrieved 2016-05-16.
116. What is Ozone? airinfonow.org
117. Anderson, W.; G.J. Prescott; S. Packham; J. Mullins; M. Brookes; A. Seaton (2001). "Asthma admissions and thunderstorms: a study of pollen, fungal spores, rainfall, and ozone". QJM: An International Journal of Medicine. 94 (8): 429–433. doi:10.1093/qjmed/94.8.429. PMID 11493720.
118. University of East Anglia press release, Cloning the smell of the seaside Archived 2012-10-31 at the Wayback Machine, February 2, 2007
119. Kosatsky T. (July 2005). "The 2003 European heat waves". Eurosurveillance. 10 (7): 3–4. doi:10.2807/esm.10.07.00552-en. PMID 29208081. Retrieved January 14, 2014.
120. Hoffmann, Roald (January 2004). "The Story of O". American Scientist. 92 (1): 23. doi:10.1511/2004.1.23. Archived from the original on 2006-09-25. Retrieved 2006-10-11.
121. Smith, LL (2004). "Oxygen, oxysterols, ouabain, and ozone: a cautionary tale". Free Radical Biology & Medicine. 37 (3): 318–24. doi:10.1016/j.freeradbiomed.2004.04.024. PMID 15223065.
122. Paul Wentworth; Nieva, J; Takeuchi, C; Galve, R; Wentworth, AD; Dilley, RB; Delaria, GA; Saven, A; et al. (2003). "Evidence for Ozone Formation in Human Atherosclerotic Arteries". Science. 302 (5647): 1053–6. Bibcode:2003Sci...302.1053W. doi:10.1126/science.1089525. PMID 14605372. S2CID 11099904.
123. Iglesias, Domingo J.; Ángeles Calatayuda; Eva Barrenob; Eduardo Primo-Milloa; Manuel Talon (2006). "Responses of citrus plants to ozone: leaf biochemistry, antioxidant mechanisms and lipid peroxidation". Plant Physiology and Biochemistry. 44 (2–3): 125–131. Bibcode:2006PlPB...44..125I. doi:10.1016/j.plaphy.2006.03.007. PMID 16644230.
124. Bortolin, Rafael Calixto; Caregnato, Fernanda Freitas; Divan, Armando Molina; Reginatto, Flávio Henrique; Gelain, Daniel Pens; Moreira, José Cláudio Fonseca (2014-02-01). "Effects of chronic elevated ozone concentration on the redox state and fruit yield of red pepper plant Capsicum baccatum". Ecotoxicology and Environmental Safety. 100: 114–121. Bibcode:2014EcoES.100..114B. doi:10.1016/j.ecoenv.2013.09.035. ISSN 0147-6513. PMID 24238720.
125. Bortolin, Rafael Calixto; Caregnato, Fernanda Freitas; Divan Junior, Armando Molina; Zanotto-Filho, Alfeu; Moresco, Karla Suzana; de Oliveira Rios, Alessandro; de Oliveira Salvi, Aguisson; Ortmann, Caroline Flach; de Carvalho, Pâmela (2016-07-01). "Chronic ozone exposure alters the secondary metabolite profile, antioxidant potential, anti-inflammatory property, and quality of red pepper fruit from Capsicum baccatum". Ecotoxicology and Environmental Safety. 129: 16–24. Bibcode:2016EcoES.129...16B. doi:10.1016/j.ecoenv.2016.03.004. ISSN 0147-6513. PMID 26970882.
126. Dickie, Gloria (2022-01-17). "Ozone harms East Asian crops, costing $63 bln a year, scientists say". Reuters. Retrieved 2022-01-23.
127. "Air pollution takes a bite out of Asia's grain crops". Nature. 601 (7894): 487. 2022-01-21. Bibcode:2022Natur.601R.487.. doi:10.1038/d41586-022-00117-3. PMID 35064229. S2CID 246165555.
128. What are the main health hazards associated with breathing in ozone?, Canadian Centre for Occupational Health and Safety
129. Documentation for Immediately Dangerous to Life or Health Concentrations (IDLH): NIOSH Chemical Listing and Documentation of Revised IDLH Values (as of 3/1/95)
130. Lai, Jennifer (2008-05-08). "Airplane Air Heavy On The Ozone – Daily Brief". Portfolio.com. Retrieved on 2012-02-01.
131. Air Quality In Airplanes: Blame Ozone And Natural Oils On Skin. Sciencedaily.com (2007-09-05). Retrieved on 2012-02-01.
132. "Visual Encyclopedia of Chemical Engineering". encyclopedia.che.engin.umich.edu.
133. "Ozone Cell vs Ozone Plate – A2Z Ozone". Archived from the original on 2020-01-10. Retrieved 2020-01-10.
134. Smith, L. I.; Greenwood, F. L.; Hudrlik, O. (1946). "A laboratory ozonizer". Organic Syntheses. 26: 63; Collected Volumes, vol. 3, p. 673.
135. Dohan, J. M.; W. J. Masschelein (1987). "Photochemical Generation of Ozone: Present State-of-the-Art". Ozone Sci. Eng. 9 (4): 315–334. Bibcode:1987OzSE....9..315D. doi:10.1080/01919518708552147.
136. Foller, Peter C.; Tobias, Charles W. (1982). "The Anodic Evolution of Ozone". Journal of the Electrochemical Society. 129 (3): 506. Bibcode:1982JElS..129..506F. doi:10.1149/1.2123890.
137. Arihara, Kazuki; Terashima, Chiaki; Fujishimam Akira (2007). "Electrochemical Production of High-Concentration Ozone-Water Using Freestanding Perforated Diamond Electrodes". Journal of the Electrochemical Society. 154 (4): E71. Bibcode:2007JElS..154E..71A. doi:10.1149/1.2509385.
138. Hale, Arthur J. (1919). The Manufacture of Chemicals by Electrolysis. D. Van Nostrand Co. pp. 15, 16. Retrieved 12 September 2019.
139. "Lab Note #106 Environmental Impact of Arc Suppression". Arc Suppression Technologies. April 2011. Retrieved October 10, 2011.
140. ¿Relámpagos del Catatumbo regeneran la capa de ozono? Archived 2016-03-05 at the Wayback Machine. Agencia de noticias de la Universidad del Zulia.
141. "Fire in the Sky". Archived from the original on 2011-07-21. Retrieved 2008-08-16.
142. Ibanez, Jorge G.; Rodrigo Mayen-Mondragon; M. T. Moran-Moran (2005). "Laboratory Experiments on the Electrochemical Remediation of the Environment. Part 7: Microscale Production of Ozone". Journal of Chemical Education. 82 (10): 1546. Bibcode:2005JChEd..82.1546A. doi:10.1021/ed082p1546.
143. "Ozone and Color Removal". Ozone Information. Archived from the original on 2011-07-15. Retrieved 2009-01-09.
144. Hoigné, J. (1998). Handbook of Environmental Chemistry, Vol. 5 part C. Berlin: Springer-Verlag. pp. 83–141.
145. "Oxidation Potential of Ozone". Ozone-Information.com. Archived from the original on 2008-04-19. Retrieved 2008-05-17.
146. Postgate, J. R. (1992). Microbes and man (3rd ed.). Cambridge: Cambridge University Press. p. 97. ISBN 978-0-521-41259-9.
147. Weaver, Matthew (30 August 2021). "Concerns over plan to use ozone to disinfect classrooms in Wales". The Guardian.
148. "Decontamination: Ozone scores on spores". Hospital Development. Wilmington Media Ltd. 2007-04-01. Archived from the original on 2007-09-29. Retrieved 2007-05-30.
149. Montecalvo, Joseph; Doug Williams. "Application of Ozonation in Sanitizing Vegetable Process Washwaters" (PDF). California Polytechnic State University. Archived from the original (PDF) on May 28, 2008. Retrieved 2008-03-24.
150. Steeves, Susan A. (January 30, 2003). "Ozone may provide environmentally safe protection for grains". Purdue News.
151. "Chemical Synthesis with Ozone". Ozone-Information.com. Archived from the original on 2008-04-10. Retrieved 2008-05-17.
152. "Clean and bleach fabrics by ozone" (PDF).
153. de Boer, Hero E. L.; van Elzelingen-Dekker, Carla M.; van Rheenen-Verberg, Cora M. F.; Spanjaard, Lodewijk (October 2006). "Use of Gaseous Ozone for Eradication of Methicillin-Resistant Staphylococcus aureus From the Home Environment of a Colonized Hospital Employee". Infection Control and Hospital Epidemiology. 27 (10): 1120–1122. doi:10.1086/507966. JSTOR 507966. PMID 17006820. S2CID 11627160.
154. Sjöström, Eero (1993). Wood Chemistry: Fundamentals and Applications. San Diego, CA: Academic Press, Inc. ISBN 978-0-12-647481-7.
155. Su, Yu-Chang; Chen, Horng-Tsai (2001). "Enzone Bleaching Sequence and Color Reversion of Ozone-Bleached Pulps". Taiwan Journal of Forest Science. 16 (2): 93–102. Archived from the original on 2010-10-14. Retrieved 2007-08-31.
156. Bollyky, L. J. (1977). Ozone Treatment of Cyanide-Bearing Wastes, EPA Report 600/2-77-104. Research Triangle Park, N.C.: U.S. Environmental Protection Agency.
157. Siemens, Werner (1857). "About the electrostatic induction and the delay of the current in bottle wires". Annals of Physics. 178 (9): 66. doi:10.1002/andp.18571780905.
158. US Environmental Protection Agency. (2009). "Drinking Water Treatability Database".
159. Sorlini, Sabrina; Collivignarelli, Carlo (2005). "Trihalomethane formation during chemical oxidation with chlorine, chlorine dioxide and ozone of ten Italian natural waters". Desalination. 176 (1–3): 103–111. Bibcode:2005Desal.176..103S. doi:10.1016/j.desal.2004.10.022.
160. Gallard, Hervé; Gunten, Urs von (2002). "Chlorination of natural organic matter: kinetics of chlorination and of THM formation". Water Research. 36 (1): 65–74. Bibcode:2002WatRe..36...65G. doi:10.1016/S0043-1354(01)00187-7. PMID 11766819.
161. Croué, J. P.; Koudjonou, B. K.; Legube, B. (1996). "Parameters affecting the formation of bromate ion during ozonation".
162. Siddiqui, Mohamed S.; Amy, Gary L. (1993). "Factors affecting DBP formation during ozone–bromide reactions". American Water Works Association. 85 (1): 63–72. Bibcode:1993JAWWA..85a..63S. doi:10.1002/j.1551-8833.1993.tb05922.x.
163. World Health Organization. (2003). "Atrazine in drinking-water: background document for development of WHO guidelines for drinking-water quality".
164. Khadre, M. A.; Yousef, A. E.; Kim, J-G. (2001). "Microbiological aspects of ozone applications in food: a review". Journal of Food Science. 66 (9): 1242–1252. doi:10.1111/j.1365-2621.2001.tb15196.x.
165. Mujovic, Selman; Foster, John E. (2018). "Plasma Physics and Chemistry for Water Reuse: Scaling the Plasma-Water Interface as an AOP Alternative". Proceedings of the Water Environment Federation 2018. 15: 1969–1983.
166. Guzel-Seydim, Zeynep B.; Greene, Annel K.; Seydim, A. C. (2004). "Use of ozone in the food industry". LWT - Food Science and Technology. 37 (4): 453–460. doi:10.1016/j.lwt.2003.10.014.
167. Weschler, Charles J. (2000). "Ozone in indoor environments: concentration and chemistry". Indoor Air. 10 (4): 269–288. Bibcode:2000InAir..10..269W. doi:10.1034/j.1600-0668.2000.010004269.x. PMID 11089331.
168. Choudhury, Bhaswati; Portugal, Sherlie; Mastanaiah, Navya; Johnson, Judith A.; Roy, Subrata (2018). "Inactivation of Pseudomonas aeruginosa and Methicillin-resistant Staphylococcus aureus in an open water system with ozone generated by a compact, atmospheric DBD plasma reactor". Scientific Reports. 8 (1): 17573. Bibcode:2018NatSR...817573C. doi:10.1038/s41598-018-36003-0. PMC 6279761. PMID 30514896.
169. Choudhury, Bhaswati; Portugal, Sherlie; Johnson, Judith A.; Roy, Subrata (2020). "Performance evaluation of fan and comb shaped plasma reactors for distribution of generated ozone in a confined space". AIAA Scitech 2020 Forum: 1165.
170. US Issued 10,651,014, Subrata Roy & Sherlie Portugal, "Compact portable plasma reactor", issued May 12, 2020.
171. Draou, Abdelkader; Nemmich, Said; Nassour, Kamel; Benmimoun, Youcef; Tilmatine, Amar (2019). "Experimental analysis of a novel ozone generator configuration for use in water treatment applications". International Journal of Environmental Studies. 76 (2): 338–350. Bibcode:2019IJEnS..76..338D. doi:10.1080/00207233.2018.1499698. S2CID 105285760.
172. Zito, Justin C.; Durscher, Ryan J.; Soni, Jignesh; Roy, Subrata; Arnold, David P. (2012). "Flow and force inducement using micron size dielectric barrier discharge actuators". Applied Physics Letters. 100 (19): 193502. Bibcode:2012ApPhL.100s3502Z. doi:10.1063/1.4712068.
173. Kuvshinov, Dmitriy; Lozano-Parada, Jaime; Siswanto, Anggun; Zimmerman, William (2014). "Efficient compact micro DBD plasma reactor for ozone generation for industrial application in liquid and gas phase systems". International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering. 8 (1).
174. CARB Indoor Air Quality Group (January 5, 2021). "An Investigation of Ozone Emissions From Consumer Products".
175. Long, Ron (2008). "POU Ozone Food Sanitation: A Viable Option for Consumers & the Food Service Industry" (PDF). Archived from the original (PDF) on 2011-07-15. (the report also shows that tapwater removes 99.95% of pathogens from lettuce; samples were inoculated with pathogens before treatment)
176. Tersano Inc (2007). "lotus Sanitises Food without Chemicals". Archived from the original on 2007-02-11. Retrieved 2007-02-11.
177. Jongen, W (2005). Improving the Safety of Fresh Fruit and Vegetables. Boca Raton: Woodhead Publishing Ltd. ISBN 978-1-85573-956-7.
178. "Alternative Disinfectants and Oxidant Guidance Manual" (PDF). United States Environmental Protection Agency. April 1999. Retrieved 2008-01-14.
179. Noble, A.C.; Summerfelt, S.T. (1996). "Diseases encountered in rainbow trout cultured in recirculating systems". Annual Review of Fish Diseases. 6: 65–92. doi:10.1016/S0959-8030(96)90006-X.
180. Ferreira, O; de Costa, O.T.; Ferreira, Santos; Mendonca, F. (2004). "Susceptibility of the Amazonian fish, Colossoma macropomum (Serrasalminae), to short-term exposure to nitrite". Aquaculture. 232 (1–4): 627–636. Bibcode:2004Aquac.232..627F. doi:10.1016/S0044-8486(03)00524-6.
181. Ribeiro, A.R.A.; Ribeiro, L.; Saele, Ø.; Hamre, K.; Dinis, M.T.; Moren, M. (2009). "Iodine-enriched rotifers andArtemiaprevent goitre in Senegalese sole (Solea senegalensis) larvae reared in a recirculation system". Aquaculture Nutrition. 17 (3): 248–257. doi:10.1111/j.1365-2095.2009.00740.x.
182. Buchan, K.; Martin-Robinchaud, D.; Benfey, T.J.; MacKinnon, A; Boston, L (2006). "The efficacy of ozonated seawater for surface disinfection of haddock (Melanogrammus aeglefinus) eggs against piscine nodavirus". Aquacultural Engineering. 35 (1): 102–107. Bibcode:2006AqEng..35..102B. doi:10.1016/j.aquaeng.2005.10.001.
183. Alothman, M.; Kaur, B.; Fazilah, A.; Bhat, Rajeev; Karim, Alias A. (2010). "Ozone-induced changes of antioxidant capacity of fresh-cut tropical fruits". Innovative Food Science and Emerging Technologies. 11 (4): 666–671. doi:10.1016/j.ifset.2010.08.008.
184. Tzortzakis, N.; Borland, A.; Singleton, I.; Barnes, J (2007). "Impact of atmospheric ozone-enrichment on quality-related attributes of tomato fruit". Postharvest Biology and Technology. 45 (3): 317–325. doi:10.1016/j.postharvbio.2007.03.004.
185. Keutgen, A.J.; Pawelzik, E. (2008). "Influence of pre-harvest ozone exposure on quality of strawberry fruit under simulated retail conditions". Postharvest Biology and Technology. 49: 10–18. doi:10.1016/j.postharvbio.2007.12.003.
186. Lestan, D.; Hanc, A.; Finzgar, N. (2005). "Influence of ozonation on extractability of Pb and Zn from contaminated soils". Chemosphere. 61 (7): 1012–1019. Bibcode:2005Chmsp..61.1012L. doi:10.1016/j.chemosphere.2005.03.005. PMID 16257321.
187. Plaue, J.W.; Czerwinski, K.R. (2003). "The influence of ozone on ligand-assisted extraction of 239Pu and 241Am from rocky flats soil". Radiochim. Acta. 91 (6–2003): 309–313. doi:10.1524/ract.91.6.309.20026. S2CID 96019177.
188. Otieno, Mark (October 2022). "Interactive effects of ozone and carbon dioxide on plant-pollinator interactions and yields in a legume crop". Environmental Advances. 9: 100285. Bibcode:2022EnvAd...900285O. doi:10.1016/j.envadv.2022.100285.
189. Rollin, Orianne (July 2022). "Effects of ozone air pollution on crop pollinators and pollination". Global Environmental Change. 75: 102529. Bibcode:2022GEC....7502529R. doi:10.1016/j.gloenvcha.2022.102529. S2CID 249086005 – via Elsevier Science Direct.
190. "Oxygen Therapy". American Cancer Society. Archived from the original on March 21, 2012. Retrieved 29 November 2012.{{cite web}}: CS1 maint: unfit URL (link)

Further reading

• Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
• Becker, K. H., U. Kogelschatz, K. H. Schoenbach, R. J. Barker (ed.). Non-Equilibrium Air Plasmas at Atmospheric Pressure. Series in Plasma Physics. Bristol and Philadelphia: Institute of Physics Publishing Ltd; ISBN 0-7503-0962-8; 2005
• United States Environmental Protection Agency. Risk and Benefits Group. (August 2014). Health Risk and Exposure Assessment for Ozone: Final Report.

External links

• International Ozone Association
• European Environment Agency's near real-time ozone map (ozoneweb)
• NASA's Ozone Resource Page Archived 2013-04-06 at the Wayback Machine
• OSHA Ozone Information Archived 2016-01-20 at the Wayback Machine
• Paul Crutzen Interview—Video of Nobel Laureate Paul Crutzen talking to Nobel Laureate Harry Kroto by the Vega Science Trust
• NASA's Earth Observatory article on Ozone
• International Chemical Safety Card 0068
• NIOSH Pocket Guide to Chemical Hazards
• National Institute of Environmental Health Sciences, Ozone Information
• NASA Study Links "Smog" to Arctic Warming—NASA Goddard Institute for Space Studies (GISS) study shows the warming effect of ozone in the Arctic during winter and spring.
• Ground-level ozone information from the American Lung Association of New England