New York State Route 426

New York State Route 426 (NY 426) is a state highway located entirely within Chautauqua County, New York, in the United States. It runs just over 13 miles (21 km) from one section of the Pennsylvania state line to another, passing through two small hamlets and providing the Southern Tier Expressway (Interstate 86 or I-86 and NY 17) with its westernmost exit in New York. NY 426 is the westernmost north–south state highway in New York.

New York State Route 426
Map of southwestern New York with NY 426 highlighted in red
Route information
Maintained by NYSDOT
Length	13.32 mi[1] (21.44 km)
Existed	1930[2]–present
Major junctions
South end	PA 426 at the Pennsylvania state line in French Creek
Major intersections	I-86 / NY 17 / Southern Tier Expressway in Mina
North end	PA 426 at the Pennsylvania state line in Mina
Location
Country	United States
State	New York
Counties	Chautauqua
Highway system
New York Highways Interstate US State Reference Parkways
← NY 425 → NY 427

At both crossings of the state line it continues as Pennsylvania Route 426 (PA 426). It is the only other state highway besides NY 440 that can claim the distinction of being a middle segment of another state's similarly-numbered highway. The New York alignment has remained virtually unchanged since it was assigned as part of the 1930 renumbering of state highways in New York, while the designations of the roads it connects to in Pennsylvania have varied over the years. The two segments of PA 426 were established at different times in the 1940s.

Route description

NY 426 north from NY 474 in French Creek

NY 426 begins where the southern segment of PA 426 leaves off at the Pennsylvania state line in French Creek 6 miles (10 km) north of Corry, Pennsylvania. The route heads north through rural southwestern Chautauqua County to the small community known as Cutting, where it overlaps NY 474 for a tenth of a mile (0.16 km) westward before resuming its trek northward.^[3] Roughly 1.5 miles (2.4 km) north of Cutting, NY 426 veers to the west to avoid a large ridge situated near Beaver Meadow Brook, a small stream leading to French Creek. The route follows the brook to where it converges with the creek, then parallels French Creek northward toward the waterside hamlet of French Creek. The creek and NY 426 split south of the community, with the creek continuing along French Creek–Mina Road to the hamlet while NY 426 bypasses French Creek to the west. The route enters the town of Mina upon intersecting Harrington Hill Road a mile (1.6 km) to the north.^[4]

A half mile (0.8 km) into Mina, NY 426 comes within view of Findley Lake, a body of water 2 miles (3.2 km) long from south to north and as wide as one-half mile (0.8 km) at points. The route follows the eastern edge of the lake north to the hamlet of Findley Lake, situated at the northern tip of the lake. Here, NY 426 overlaps NY 430 westward for three blocks through the community prior to connecting to the Southern Tier Expressway (I-86 and NY 17) by way of an interchange 1 mile (1.6 km) north of Findley Lake. The exit is the westernmost exit on NY 17; however, the expressway itself continues west to I-90 near Erie, Pennsylvania, as I-86. Past the expressway, NY 426 continues northwest for another 2 miles (3.2 km) through nondescript terrain to the Pennsylvania state line, where it becomes the northern segment of PA 426.^[3]

History

The entirety of NY 426 was assigned as part of the 1930 renumbering of state highways in New York as a northward extension of PA 189, a short route leading south to Corry, Pennsylvania. Originally, NY 426 broke from its modern alignment at French Creek–Mina Road to serve the hamlet of French Creek via French Creek–Mina and King roads before rejoining its current route west of the hamlet.^[2] The route was realigned onto its present alignment west of French Creek c. 1936.^[5][6] In the early 1940s, the 426 designation was extended southward into Pennsylvania as PA 426.^[7][8] It was also extended northwestward into Pennsylvania in the mid-1940s, effectively making NY 426 the missing segment of an otherwise discontinuous PA 426.^[8][9]

Major intersections

The entire route is in Chautauqua County.

Location	mi[1]	km	Destinations	Notes
French Creek	0.00	0.00	PA 426 south – Corry	Continuation into Pennsylvania
	2.08	3.35	NY 474 east – Clymer, Jamestown	Eastern terminus of NY 426 / NY 474 overlap
	2.19	3.52	NY 474 west – Erie, PA	Hamlet of Cutting; western terminus of NY 426 / NY 474 overlap
Mina	10.36	16.67	NY 430 east	Hamlet of Findley Lake; eastern terminus of NY 426 / NY 430 overlap
	10.62	17.09	NY 430 west – North East, Erie, PA	Western terminus of NY 426 / NY 430 overlap
	11.46	18.44	I-86 / NY 17 / Southern Tier Expressway – Erie, PA, Jamestown, Binghamton	Exit 4 (I-86 / NY 17)
	13.32	21.44	PA 426 north	Continuation into Pennsylvania
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

• U.S. roads portal

References

1. "2008 Traffic Data Report for New York State" (PDF). New York State Department of Transportation. June 16, 2009. p. 313. Retrieved December 6, 2009.
2. Tourist Map of Pennsylvania (PDF) (Map). Pennsylvania Department of Highways. 1930. Retrieved March 25, 2008.^{[permanent dead link]}
3. "New York State Route 426" (Map). Google Maps. Retrieved March 25, 2008.
4. Clymer Quadrangle – New York – Chautauqua Co (Map). 1:24,000. 7.5 Minute Series (Topographic). United States Geological Survey. 1954. Retrieved March 25, 2008.
5. Road Map & Historical Guide – New York (Map). Cartography by Rand McNally and Company. Sun Oil Company. 1935.
6. New York (Map). Cartography by General Drafting. Standard Oil Company. 1936.
7. New York Info-Map (Map). Cartography by Rand McNally and Company. Gulf Oil Company. 1940.
8. New York with Pictorial Guide (Map). Cartography by General Drafting. Esso. 1942.
9. New York with Pennsylvania (Map). Cartography by Rand McNally and Company. Texas Oil Company. 1946.

External links

Template:Attached KML/New York State Route 426

KML is from Wikidata

• New York State Route 426 at New York Routes