Loading AI tools
British nine-cylinder radial engine family From Wikipedia, the free encyclopedia
The Bristol Jupiter is a British nine-cylinder single-row piston radial engine that was built by the Bristol Aeroplane Company. Originally designed late in World War I and known as the Cosmos Jupiter, a lengthy series of upgrades and developments turned it into one of the finest engines of its era.
Jupiter | |
---|---|
![]() | |
Bristol Jupiter on display at the Royal Air Force Museum London | |
Type | Piston aircraft engine |
Manufacturer | Bristol Aeroplane Company |
Designer | Roy Fedden |
First run | 29 October 1918 |
Major applications | Bristol Bulldog Gloster Gamecock |
Number built | >7,100 |
Developed into | Bristol Mercury |
The Jupiter was widely used on many aircraft designs during the 1920s and 1930s. Thousands of Jupiters of all versions were produced, both by Bristol and abroad under licence.
A turbo-supercharged version of the Jupiter known as the Orion suffered development problems and only a small number were produced. The "Orion" name was later re-used by Bristol for an unrelated turboprop engine.
The Bristol Jupiter was licensed by the Soviet Union as the Shvetsov M-22.
The Jupiter was designed during World War I by Roy Fedden of Brazil Straker and later Cosmos Engineering. The first Jupiter was completed by Brazil Straker in 1918 and featured three carburettors, each one feeding three of the engine's nine cylinders via a spiral deflector housed inside the induction chamber.[1] During the rapid downscaling of military spending after the war, Cosmos Engineering became bankrupt in 1920, and was eventually purchased by the Bristol Aeroplane Company on the strengths of the Jupiter design and the encouragement of the Air Ministry.[2] The engine matured into one of the most reliable on the market. It was the first air-cooled engine to pass the Air Ministry full-throttle test, the first to be equipped with automatic boost control, and the first to be fitted to airliners.[3]
The Jupiter was fairly standard in design, but featured four valves per cylinder, which was uncommon at the time. The cylinders were machined from steel forgings, and the cast cylinder heads were later replaced with aluminium alloy following studies by the Royal Aircraft Establishment. In 1927, a change was made to move to a forged head design due to the rejection rate of the castings. The Jupiter VII introduced a mechanically-driven supercharger to the design, and the Jupiter VIII was the first to be fitted with reduction gears.[4]
In 1925, Fedden started designing a replacement for the Jupiter. Using a shorter stroke to increase the revolutions per minute (rpm), and including a supercharger for added power, resulted in the Bristol Mercury of 1927. Applying the same techniques to the original Jupiter-sized engine in 1927 resulted in the Bristol Pegasus. Neither engine would fully replace the Jupiter for a few years.
In 1926 a Jupiter-engined Bristol Bloodhound with the registration G-EBGG completed an endurance flight of 25,074 miles (40,353 kilometres), during which the Jupiter ran for a total of 225 hours and 54 minutes without part failure or replacement.[5]
The Jupiter saw widespread use in licensed versions, with fourteen countries eventually producing the engine. In France, Gnome-Rhone produced a version known as the Gnome-Rhône 9 Jupiter that was used in several local civilian designs, as well as achieving some export success. Siemens-Halske took out a licence in Germany and produced several versions of increasing power, eventually resulting in the Bramo 323 Fafnir, which saw use in German wartime aircraft.[6]
In Japan, the Jupiter was licence-built from 1924 by Nakajima, forming the basis of its own subsequent radial aero-engine design, the Nakajima Ha-1 Kotobuki.[7] It was produced in Poland as the PZL Bristol Jupiter, in Italy as the Alfa Romeo 126-RC35,[8] and in Czechoslovakia by Walter Engines. The most produced version was in the Soviet Union, where its Shvetsov M-22 version powered the initial Type 4 version of the Polikarpov I-16 (55 units produced). Type 4 Polikarpovs can be identified by their lack of exhaust stubs, rounded NACA cowling and lack of cowling shutters, features which were introduced on the Shvetsov M-25 powered Type 5 and later variants (total production 4,500+ units).[9][10] Production started in 1918 and ceased in 1930.
The Jupiter was produced in many variants, one of which was the Bristol Orion of 1926. Metallurgy problems with this turbo-supercharged engine caused the project to be abandoned after only nine engines had been built.[11]
The Jupiter is probably best known for powering the Handley Page H.P.42 airliners, which flew the London-Paris route in the 1930s. Other civilian uses included the de Havilland Giant Moth and de Havilland Hercules, the Junkers G 31 and the huge Dornier Do X flying boat, which used no less than twelve engines.
Military uses were less common, but included the parent company's Bristol Bulldog, as well as the Gloster Gamecock and Boulton Paul Sidestrand. It was also found in prototypes around the world, from Japan to Sweden.
By 1929 the Bristol Jupiter had flown in 262 different aircraft types,[13] it was noted in the French press at that year's Paris Air Show that the Jupiter and its licence-built versions were powering 80% of the aircraft on display.[14][citation needed]
Note:[15]
Data from Lumsden[20]
Related development
Comparable engines
Related lists
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.