Crown gear

A crown gear (also known as a face gear or a contrate gear) is a gear which has teeth that project at right angles to the face of the wheel. In particular, a crown gear is a type of bevel gear where the pitch cone angle is 90 degrees.^[1]^[2] A pitch cone of any other angle is simply called a bevel gear.^[3] Crown gears normally mesh with other bevel gears, or sometimes spur gears, a typical use being a crown gear and pinion system which allows a rotary motion to be shifted 90 degrees.

[1]
Maitra, Gitin (1994-06-01). Handbook of Gear Design (2 ed.). McGraw-Hill Professional. ISBN 978-0-07-460237-9.
[2]
Jones, Franklin D (1984). Gear Design Simplified (3 ed.). Industrial Press. p. 48. ISBN 978-0-8311-1159-5.
[3]
Oberg, Erik (1920). Spur and bevel gearing (1 ed.). Industrial Press. p. 202.

This article about a mechanical engineering topic is a stub. You can help Wikipedia by expanding it.

[Maitra-1] [1]
Maitra, Gitin (1994-06-01). Handbook of Gear Design (2 ed.). McGraw-Hill Professional. ISBN 978-0-07-460237-9.

[2] [2]
Jones, Franklin D (1984). Gear Design Simplified (3 ed.). Industrial Press. p. 48. ISBN 978-0-8311-1159-5.

[3] [3]
Oberg, Erik (1920). Spur and bevel gearing (1 ed.). Industrial Press. p. 202.

[1]

[2]

[3]

Wikiwand in your browser!

Crown gear

Wikiwand in your browser!

See also

References