Loading AI tools
Storage density for magnetic disks From Wikipedia, the free encyclopedia
Disk density is a capacity designation on magnetic storage, usually floppy disks. Each designation describes a set of characteristics that can affect the areal density of a disk or the efficiency of the encoded data. Such characteristics include modulation method, track width, coercivity, and magnetic field direction.
 | This article needs additional citations for verification. (May 2023) |
![](#/media/File:5.25"-Diskette.jpg)
Single density (SD or 1D) describes the first generation of floppy disks that use an iron oxide coating. Floppy drives utilize 300-oersted write heads, FM encoding, and a track width of 0.330 mm (0.0130 in) for a density of 48 tracks-per-inch (tpi) and 5,876 bits-per-inch (bpi).
Double density (DD or 2D) doubles capacity over SD by replacing FM encoding with an improved line code, such as modified frequency modulation (MFM), modified modified frequency modulation (M²FM), FM/MFM or group coded recording (GCR).
SD (1D) and DD (2D) designations were generally identical to those of 8-inch disks.
Quad density (QD or 4D) doubles capacity over DD by narrowing the width of tracks to 0.160 mm (0.0063 in) for a density of 96 tpi. Some manufacturers (Micropolis, Tandon, Micro Peripherals (MPI), Teac) used a track density of 100 tpi for quad-density drives, which were incompatible with 96 tpi models.
The Commodore 8050 and 8250 are rare instances of drives that used 375 kbit/s GCR code instead of the usual 250 kbit/s double-density format and they could store roughly 500 kilobytes on one side of a disk.
High density (HD) improves capacity by utilizing a 96 tpi track density in conjunction with improved cobalt disk coating and stronger 600-oersted write heads, allowing 9,646 bpi to be written.
Double density (DD) 3½-inch disks use an iron oxide coating, just as with 5¼-inch DD/QD disks. However, drives utilize stronger 670-oersted write heads and a narrower track width of 0.115 mm (0.0045 in) for a density of 135 tpi and 8,717 bpi.
High density (HD) 3½-inch disks switch to a cobalt disk coating, just as with 5¼-inch HD disks. Drives use 700-oersted write heads for a density of 17,434 bpi.
Extra-high density (ED) doubles the capacity over HD by using a barium ferrite coating and a special write head that allows the use of perpendicular recording.[1][2]
Triple density (TD) triples the capacity over ED by tripling the track density and improving other parameters.[3][4][5] The drives used longitudinal recording.[2]
| Size | 8-inch | 5¼-inch | 3½-inch | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Density | SD | DD | SD | DD | QD | HD | DD | HD | ED[1] | TD[4] | |
| Disk coating | Iron oxide[1][6] | Cobalt[1][6] | ? | Iron oxide, Cobalt?[1] | Cobalt[1][6] | Barium ferrite[1] | ? | ||||
| Coercivity [Oe] | 290,[7] 300[8][1][6] | 600,[1][6] 660,[7] 670[8] | ca. 600 | 600?,[1][6] 660,[7] 670[8] | 700,[8] 720[7][1] | 750?,[1] 1060,[7] 1200 | ? | ||||
| Coating thickness [μm] | 110 | 110 | ? | 100,[8] 2.5,[7] 2.0-3.0[6] | ? | 55,[8] 1.3,[7] 1.0-1.5[6] | ? | 65,[8] 1.9,[7] 2.0-3.0[6] | 55,[8] 0.9,[7] 1.0-1.5[6] | ? | ? |
| Line code | FM | MFM, M²FM, FM/MFM or GCR | FM | MFM or GCR | MFM | MFM[9] | MFM or GCR | MFM | |||
| Track width [mm] | 0.330[1] | 0.160[1] | ? | 0.115[1] | ? | ||||||
| Track density [tpi] | 48[1] | 96[1] or 100 | 96[1] | 67.5[9] | 135[1] | 406.5[4] | |||||
| Bit density [bpi] | 5,876,[2][1] 5,922[10] | 9,646,[1] 9,870[2] | 8,650[9] | 8,717[2][1] | 17,432,[2] 17,434[1] | 34,868[2][1] | 36,700[4] | ||||
| Recording direction | longitudinal / horizontal[1] | perpendicular / vertical[1] | longitudinal[2] / horizontal[1] | ||||||||
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.
