The Dodge WC series (nicknamed "Beeps"[nb 3]) is a prolific range of light 4WD and medium 6WD military utility trucks, produced by Chrysler under the Dodge and Fargo marques during World War II.[nb 4] Together with the 14-ton jeeps produced by Willys and Ford, the Dodge 12ton G-505 and 34ton G-502 trucks made up nearly all of the light 4WD trucks supplied to the U.S. military in WWII – with Dodge contributing some 337,500 4WD units[nb 5] (over half as many as the jeep).[11][5][nb 6]

Quick Facts Type, Place of origin ...
Dodge WC series
Thumb
The most produced variants in the range were the 34-ton, 4×4, WC-51 and WC-52 Weapons Carriers – shown a WC-51: short front bumper, without winch.
Type12-ton, 34-ton 4×4 truck
112-ton 6×6 truck
Place of originWarren Truck Assembly, Michigan, United States
Service history
WarsWorld War II
Korean War
Various post 1945 conflicts
Production history
ManufacturerDodge / Fargo, assembled at Lynch Road Assembly, Hamtramck, MI
Produced1940–1945
No. builtTotal: ≈382,350 excl. variants
Consisting of:
12-ton 4×2 models
1,542 units
All 4×4 Models
~337,600 units – across:
~82,390 12-ton units (1940–1942) [1][2] [nb 1][nb 2] and
255,195 34-ton units (1942–1945)
112-ton 6×6 Models
43,224 units [4][5]
VariantsD8A  12-ton, 4×4 (1941, Canada) – 3,000 units [6]
D3/4 APT   34-ton, 4×4 (1945, Canada) – 11,750 units [6]
VF-401 – VF-407  112-ton, 4×4 (1940) – 6,472 units [7][8]
T-203B  112-ton, 4×4 (1941) – 1,500 units
WF-32 / G-618   112-ton, 4×2 (1942–1944, Iran) – 9,600 units
Specifications (WC-51 / WC-52[9])
Mass5,250 lb (2,380 kg) empty
(5,550 lb (2,520 kg) with winch)
Length166+78 in (424 cm)
(176+12 in (448 cm) with winch)
Width82+34 in (210 cm)
Height81+78 in (208 cm)

EngineDodge T-214
92 hp (69 kW)
Payload capacity1,500 pounds (680 kg)
Transmission4 speed × 1 range
SuspensionLive beam axles on leaf springs
Ground clearance10+2332 in (27.2 cm)
Fuel capacity30 US gal (114 L)
Operational
range
240 mi (386 km)
Maximum speed 55 mph (89 km/h)
Close
Thumb
The "Ben Hur" 1-ton, 2-wheel cargo-trailer was frequently mated to the WC series trucks.

Contrary to the versatility of the highly standardized jeep, which was mostly achieved through field modification, the Dodge WCseries came in many different, purpose-built, but mechanically uniform variants from the factory, much akin to the later family of High Mobility Multipurpose Wheeled Vehicles. The WC series evolved out of, and was part of a more extended family of trucks, with great mechanical parts commonality, that included open- and closed-cab cargo, troops and weapons carriers, (radio) command, and reconnaissance cars, ambulances, carry-alls, panel vans, and mobile telephone installation and (emergency) field workshop trucks.

The Dodge WC series were essentially built in two generations. From 1940 to early 1942, almost 82,400 of the 12ton 4x4 Dodge trucks were built — initially called the VC series, but the great majority, from 1941, in the WC series, and in more variants.[10][14][2] Contrary to what Dodge's nomenclature suggested, the 1941 WC models were a direct evolution of the 1940 VC models, retaining the U.S. Army's G-505 Ordnance Corps Supply Catalog number.

For 1942, the trucks bodies and chassis were largely redesigned – heavier frames and drivetrains uprated them to carry 34tons off-road. And widening their tracks, while greatly shortening the wheelbase on the main models, plus lowering the bodies' center of gravity, gave them a much more square stance, with a much better break-over angle and side-slope stability. The trucks thus became the shorter G-502, 34ton, 4×4 truck (Dodge), and from 1943 also the longer, stretched G-507, 112ton, 6x6 personnel and cargo truck (Dodge) — all while retaining Dodge WC model codes. Although the 34tons improvements meant substantial design changes, they did retain some 80% interchangeable components and service parts with the 12ton models[14] — a vital Army requirement, for field maintenance and operability of the trucks.[15]

Dodge was the U.S. Army's main supplier of 12ton trucks, and its sole supplier of both 34ton trucks and 112ton 6x6 trucks in World War II.[5] With over a quarter million units built through August 1945, the G-502 34tons were the most common variants in the WCseries.[5]
After the war, Dodge developed the 34-ton WCseries into the civilian 4×4 Dodge Power Wagon; and in 1951, the WCs were replaced by the very similar 34ton 4x4 Dodge M-series vehicles .

Though the majority of Dodges built were 'Weapons Carriers', "WC" was not abbreviated from this, but a regular Dodge model code – initially "W" for 1941, and "C" for a nominal half-ton payload rating.[nb 7] However, the "WC" model code was simply retained after 1941 — for both the 34-ton, as well as the 112ton rated 6x6 Dodges.[14]
All in all, not counting mechanically related variants, the WC series alone involved 52 model versions (thirty 12ton 4×4, eight 12ton 4×2, twelve 34ton 4×4, and two 112ton 6×6 models). Creating vehicles of a common platform in such a variety of designs, with payloads ranging from 12ton to 112tons, had no equal in its time, and is seen as an extraordinary feat of the WWII American auto industry.[17]

Scope of the Dodge WC series

The name of this article would at first suggest a focus on models that are indeed called Dodge WC-numbers, either 4x4 or 6x6. However, the U.S. Army Ordnance Corps' central Standard Nomenclature List (SNL) Supply Catalog, covering the WC series, conveys both by its title, "SNL G-657 – Master Parts List, Dodge Trucks", as well as by the explicit types list on its second page, that (because of the large amount of shared parts and components), the family of vehicles must at least be considered to include the:

  • 1940 half-ton (T-202) VC series and 1+12-ton (T-203) VF models
  • 1941 half-ton (T-207, T-211, and T-215) WC series
  • 1942 (T-214) three-quarter ton and 1943 (T-223) 1+12-ton WC series, but also
  • 1941 two-wheel drive (T-112) half-tons and (T-118) 1+12-ton WC series.

Additionally, close variants of the T-207 WC-1, and of the T-214 WC-51/WC-52, were derived and made in Canada, as the T212 'D8A' and the T236 '3/4 Ton APT' (for 'Air PorTable') respectively; and further production of T-203 variants became indicated as both the T-203B, and as the WF series.

By contrast, Chrysler / Dodge Canada built another 165,000 mostly three-ton trucks, a hasty addition to the production of Canadian Military Pattern trucks, that were more closely derived from the commercial Dodge T-, V-, and W-Series trucks, and the same is true for the 15,000 'parts bin special' (T-234) "Burma Road" trucks, ordered by Chinese leader Chiang Kai-shek, at the time an ally against Japan.

History and design

1900–1939 — Dodge Brothers start making cars and 4x4 trucks for the U.S. Army

Dodge had been the United States military's primary supplier of light wheeled vehicles, since before the U.S. joined the First World War.[18] After starting business in 1900, producing precision engine and chassis components for other car builders in Detroit — Ford and Oldsmobile chief among these — Dodge introduced their first car, the Model 30/35 tourer, in 1914. It was stronger and more high quality than the ubiquitous Ford Model T, and in 1916, Dodge cars proved their durability, both in the 1910s U.S.–Mexico Border War — the U.S. military's first operation to use truck convoys,[19] as well as in World War I, when some 12,800 Dodge cars and light trucks were used,[18] primarily as ambulances and repair trucks.,[20] but also as staff and reconnaissance vehicles. All the while, Dodge maintained its reputation for high quality truck, transmission, and motor parts they kept making for other successful manufacturers.

Dodge civilian, commercial trucks were at first largely based on their passenger cars, offering light- and medium-duty trucks, like pickups, station hacks, panel vans, and carry-alls. Dodge's passenger-car chassis were sturdy enough for such trucks, from their 1914 introduction. But Dodge expanded into medium-heavy duty trucks during the later 1930s and the 1940s. Crucial developments for Dodge were the switch to specific truck-frames and bodies in 1935, for a new, 1936 model-year truck generation. The dedicated truck frames were heavier and stronger than the lighter passenger-car chassis. In 1938, Dodge opened a very large new factory, dedicated to truck manufacturing,[21] and later that same year, Dodge introduced a drastically redesigned new truck line-up again: the 1939 T-series 'Job-rated' trucks.

Thumb
1934 K-39-X-4(USA) – Dodge's first military 4x4 truck
Thumb
The initial Dodge VC-series, half-ton military 4x4s, were based on the 1939 T-series like this

Dodge developed their first four-wheel drive truck in 1934, requested by the U.S. Army — an experimental 112 ton rated model, designated K-39-X-4(USA),[nb 8] of which 796 units were ordered, in multiple configurations.[18][7] Timken supplied driven front axles and transfer-cases, which were added to a militarized commercial truck. The Timken transfer case was the first part-time design,[22] that allowed the driver to engage or disengage four-wheel drive using a lever inside the cabin.[20][23] In spite of the limited 1930s U.S. military budgets, the 1934 trucks served well enough that, after a couple of years, Dodge received further Army contracts for 112ton, 4-wheel drive trucks, and these were further developed from the late thirties. Dodge built the U.S. Army further batches of 112ton 4x4 trucks in 1938, 1939 and 1940.[24]

In 1938, a batch of 1,700 experimental RF-40-X-4(USA) trucks were procured, and a further 292 experimental units, typed TF-40-X-4(USA) in 1939 – the first to be built, based on Dodge's new for 1939 T-, V-, and W-Series trucks.[18] All of the 112-ton Army 4x4s, including the 800 trucks of 1934, rode on a 143 in (363 cm) wheelbase, and the 1938 RF-40 and 1939 TF-40 four-wheel drives were the first for which Dodge moved to separate engineering codes, in the T-200 range (T-200 and T-201 respectively).[7]

However, Dodge also eagerly pursued military contracts for half-ton four-by-fours at the same time. The smaller size had outperformed the 112-ton 4x4 during testing in 1938,[8] and Dodge had invested greatly in half- to one-ton trucks in prior years. In 1936, Dodge's light, car-based trucks had been crucially redesigned — abandoning the use of passenger car frames, instead for the first time built on distinct, modern truck-style chassis, with the frame-rails welded to the cross-members on their half-ton to one-ton rated trucks.[25] Additionally, Dodge had built their all new, very large Warren Truck Assembly plant in Michigan, specifically for mass-production of light and medium trucks, opened in 1938.

Then, for the 1939 model year, Dodge again presented a completely redesigned line of pickups and trucks – the art-deco styled, Dodge T-, V-, and W-Series "Job-Rated" trucks, available in an unprecedented number of sizes, payload rates and configurations, aiming the trucks to fit every different job.[25][26]

1940 — 12-ton VC and 112-ton VF models

Thumb
1940 Fargo-badged truck at the Australian Army History Unit museum.
Thumb
Dodge D15 Canadian Military Pattern truck, shared much with the 1940 VC-series.

Well before the onset of World War II, it was clear that the USA needed to update its military. The Quartermaster Corps (Q.C.), responsible at the time for providing the military with non-combat vehicles, moved to standardize truck designs, and by 1939, as the war in Europe erupted, the Army had settled on five payload-based general-purpose, cross-country truck classes: 12-ton, 112-ton, 2+12-, 4- and 7+12-ton.[27] Introduction of a 12ton standard 4WD class meant a significant doctrine shift, away from the conventional belief that all the extra weight, costs and mechanical complexity of adding 4-wheel-drive wouldn't be worth it on any general purpose military vehicle with an off-highway payload capacity, below the (up to that point) standard 112ton Army cargo unit. Mirroring the civilian market, where the use of all-wheel drive was practically non-existent in anything below 112-ton payload vehicles. Light-duty off-roaders were a very small niche-market, only filled by after-market conversions, primarily by Marmon-Herrington.[28]

By June 1940 the Q.C. had tested and approved its first three standard commercial based, all-wheel drive trucks: the 112-ton 4x4 Dodge, the GMC 2+12-ton 6x6 and a Mack 6-ton 6x6.[29] With regards to Dodge however, the U.S. military reconsidered its preferences for the build-up for the war almost immediately after this.

Although in 1936, a Marmon-Herrington converted half-ton Ford had become the Army's first light 4-wheel drive,[30] and the Army had initially standardized Dodge's 4x4 trucks in the 112-ton class — following Dodge's push for building 12tons, after mid 1940 the Army decided they preferred Dodge to build the light-duty four-wheel drives, contracting for a series of half-ton trucks,[24] while GM / Chevrolet was instead going to become the standard supplier for 112-ton trucks.[5] Dodge successfully outbid GMC's 1939 ACK-101 half-ton truck,[31] as well as Marmon-Herrington, who could not retrofit in the required volume or price, not to mention International's M-1-4 half-ton truck, which wasn't built until 1941, for the U.S. Marine Corps.[32] So, when in the summer of 1940 the largest government truck contract awarded went to Chrysler's Dodge / Fargo Division, for more than 14,000 (mostly) 4x4 trucks,[33] this was in the midst of the transition, and thus included both orders for 12ton and 112ton trucks, as GM / Chevy still needed to tool up for mass-producing 4WD 112-tonners.

Dodge had started developing designs for a 4x4 half-ton in 1939, and began production in earnest in 1940 — both 4x4 half-tons, as well as 112-ton 4x4 and 4x2 trucks. On all 1940 trucks, front sheetmetal was mostly identical to the commercial VC and VF models of that year, with the addition of a big brush guard mounted in front of the grille and headlights. Except for the addition of 4-wheel drive, and custom bodies on the 12ton command cars, the trucks followed the 1939 procurement doctrine, to "use commercial trucks with only a few modifications such as brush guards and towing pintles to fit them for military use." [13]

Thumb
1940 Dodge VC-5 Open Cab pickup. The classic, pre-war bucket seats attempted to keep occupants on board, prior to the introduction of seat belts.

The first of the 12-ton, 4x4, VC series military trucks were based on Dodge's 1939 commercial, one-ton rated model TC-series. The military VC models kept the same wheelbase and got the same civilian engine upgrade for 1940, but gained four-wheel drive, and a new internal technical code: T-202. Manufacturing of the half-ton Dodge VC-models (SNL number G-505) began in 1940, making these the U.S. Army's first ever light-duty, mass-produced 4-wheel drive trucks. The soldiers also called the light command reconnaissance vehicles "jeeps," but this was also common with several other vehicles at the time.[34] — before that term migrated to the quarter-tons, starting gradually in 1941.[35][36]

A total of 4,640 VC models were built across six variants – mostly pick-ups and reconnaissance cars. On the one hand, these 12ton VC trucks proved so successful, that much greater quantities were immediately ordered, and they were further developed into the G-505, 12ton WC models built in 1941. On the other hand, an even lighter and smaller 4x4 truck was needed: a quarter-ton, that would soon replace the Dodges as the U.S.' lightest 4x4 military trucks. Although no longer standard, the VC trucks remained in use until the end of the war.[37] The Dodge VC models were built a year ahead, and in a slightly greater number than any of the pre-standard quarter-ton jeeps that followed.

Thumb
The 12-ton VC-series didn't include an ambulance, but the 112-ton VF-series did. The VF-407 was Dodge's first 4x4 military ambulance — only 3 were made.

In 1940, Dodge also built 6,472 four-wheel drive 112-ton trucks, under two U.S. contracts – one awarded to Dodge, and one to Fargo.[8][38][nb 9] The models VF-401 to VF-407 (or engine/tech type T-203 by Dodge – and G-621 by the Army), were a continuation of their experimental pre-war predecessors, the RF-40(-X) and TF-40(-X) (or T-200 / T-201), still riding on a chassis of the same 143 in (3.63 m) wheelbase. Production consisted of just over 6,000 closed cab, open bed cargo trucks, plus just under 400 dump-trucks.

Like on the 12-ton VC-series, the 1940 VF-400 112-ton models simply used civilian front sheet-metal, based on the 1939 commercial model TE-30 cab, with a brush-guard fitted in front of the grille and headlights — but with a Dodge developed front driving axle, directional, cross-country tires, and a military cargo body.[39] Importantly, one thousand of the VF-400 series cargo trucks were equipped with a power take-off, gear-driven Braden model MU 10,000 lb (4,500 kg) capacity winch — a feature that was carried over on many of the subsequent 12-ton and 112-ton WC series models, directly from 1941. And although the light-duty WC models that followed, did not receive the VF-400's two-speed transfer cases, these did return on the 112-ton 6x6 trucks, the WC-62 and WC-63. An ambulance model, VF-407, was also designed, but only three units were built, likely experimental.[1][40]

Thumb
World War II soldiers called the 12-ton 1940/1941 Dodge Reconnaissance / Weapon Carriers a "Jeep" before the Willys MB.[35][36]

These proved to be the last of Dodge's 112-ton 4x4 trucks for the war. Although the Army had steadily taken the bulk of its trucks in this category from Dodge / Fargo up til then, further production of 112-ton 4x4 trucks was instead awarded to GM's Chevrolet G506, which became the standard in this segment for the rest of the war.[8]

Aside from four-wheel drive trucks, production started for a militarized commercial 112-ton, rear-wheel drive truck in 1940 — initially Dodge's model VF-31, cargo (engineering code T-98) under the government SNL number G-618. The 4x2 model VF-31 was succeeded by the model WF-31 (internally T-118) for 1941 (closed cab tractor) and 1942 (cab and chassis) — both on a 135 in (3.43 m) wheelbase — and the 1942 model WF-32, closed cab, stake and platform cargo truck, on a 160 in (4.06 m) wheelbase.[41][1] After a modest production of 516 units of the WF-31,[40] at least 9,500 Dodge WF-32 trucks were built, mostly for lend-lease to Russia.[42][43][44]

Quick Facts External videos ...
External videos
Dodge trucks in 1940 U.S. war promotion film
video icon "Army on Wheels" – WW II-era U.S. Army exercise stock film on Periscope Archives. Made by the U.S. War Department, together with Dodge, the May 1940 film opens with news of 7,000 new Dodge trucks for use by Uncle Sam (from 02:30) — showing VC and VF models. The four-wheel drive off-road capability, ruggedness, and the diverse uses for the vehicles are expounded, for instance: officers employ portable desks in their command cars to study maps and plot strategies (mark 13:00).
Close

1941–1942 — 12-ton WC series

Thumb
All three light U.S. 4x4 trucks, nicknamed 'jeeps' in World War II: a Willys 14ton, and Dodge 34ton and 12ton (L to R).

The 1940 VC-series Dodge 12-ton 4x4s were well liked but considered only an interim solution, because they were essentially a modified civilian truck. At the outset of World War II a more military design was laid out.[18] Dodge evolved the 1940 VC1 to VC6 into the equally half-ton rated WC series of military light trucks, produced in 38 model variants, of which 30 were four-wheel driven, in varying amounts — thousands of some models were produced, while only a few of some others were made. Where the military VCseries still used much civilian sheet-metal, distinguished by a brush-guard in front of the grille — the WCseries came with wide-open, almost flat fenders that prevented mud build-up, clogging rotation of the wheels — as well as a redesigned, sloping nose with an integrated, round, grated grille / brush-guard. A new ambulance with a fully enclosed, all-steel box rear body was designed, on a longer, 123 inch wheelbase; and PTO-driven winches were now fitted to some models.

The 12ton WC models were the first all-military design Dodge developed in the build-up to full mobilization for World War II,[14] and they were the U.S. Army's first standard light 4x4 trucks — prior to the quarter-tons — when the U.S. formally declared war in December 1941.[18] Soldiers would sometimes call the new vehicles 'jeeps', as was still common practice before the term migrated to the yet to be introduced Willys and Ford 14-tons, and eventually stuck to those.[34]

Both the Dodge half-ton VC and WC trucks were part of the Army G-505 series. Some 77,750 four-wheel drive 12ton WC numbered trucks were produced from late 1940 to early 1942, under War Department contracts.[1][2][nb 2] Additionally, aside from the fully military 4WD models, a small total of 1,542 two-wheel drive units retaining civilian sheet-metal were also supplied to the U.S. military, bearing WC model numbers in this same range. These models carried the SNL-code G-613, and brought the total number of half-ton WCseries up to some 79,300 units, and the grand total of all half-tonners (VC and WC; 4WD and 2WD) to almost 84,000.

From August 1941, the Dodge T-211 models received the uprated 92 hp (gross) engine, that was from then on fitted to all WC trucks produced through August 1945: the T-215 half-tons, all of the G-502, 34-ton models, as well as the G-507, T-223, 6x6 trucks.

1942–1945 — 34-ton, G-502 WC series

Thumb
The 34-ton and 112-ton T-214 redesign gave the Dodge WC series a distinctly different look and proportions.
Thumb

In 1940 the Army revised its range of standard, payload-based, general-purpose truck classes: a 14-ton "small truck" requirement was added, (these became famous as the WW II 'jeeps', after many other nicknames); and after buying over 80,000 12-ton trucks from Dodge, the U.S. Army instead wanted 34-ton rigs – and some more heavy categories were specified.[27]

The Quartermaster General wanted to start direct negotiations with Dodge, GM and Mack for certain models immediately, but not until after February 1941 could the Quartermaster Corps choose manufacturers directly, based on their engineering and production capabilities.[27] One deciding factor had to do with availability of certain critical components, like transfer cases and especially constant-velocity joints, not often used on commercial trucks until then, but all-wheel drive vehicles all needed these, to drive their front wheels smoothly. Additionally, all-wheel drive trucks needed two or three times the amount of driven axles, meaning more gears to cut for all the differentials. Produced until the war by a just a few specialized firms with limited capacity – from spring 1942, Ford, Dodge and Chevrolet joined in fabricating these in mass quantity,[33] and Dodge were experienced in making quality, precision parts, since the earliest beginnings of the company.

While the Army bought many half-ton WC series trucks, Dodge had to replace them with new 34ton trucks. In late 1941, Dodge introduced a redesigned WCseries of 4x4 trucks, uprated to 34ton off-road capacity, and their SNL code changed to G-502. The 34ton featured a lower profile truck bed that could seat eight troops, plus under seat stowage compartments; while service-parts remained 80 percent interchangeable with the existing 12ton series.[18] Maintaining 80% service parts interchangeability with the 12ton models was of great value to both the field mechanics, and spare parts supply chain logistics. It also meant that production of the 34ton models could start very quickly, and they could be quickly deployed. The 12ton, G-505 WCtrucks remained in various uses to the end of World War II – from 1943 as "limited standard" vehicles.[14]

Throughout the war, Dodge was the U.S. Army's sole producer of 34ton trucks, and built a total of 255,193 of these, across all variants, from April 1942 to August 1945.[5][45][46] Standard vehicles in the 34ton 4x4 class were the WC-51 / WC-52 Weapons Carrier, WC-56 /-57 /-58 (Radio) Command Reconnaissance, WC-53 Carryall, and the WC-54 Ambulance. In the mass-produced cargo/troop and command trucks, the WC-52 and WC-57 are identical to the WC-51 and WC-56, but have a longer frame, extending further forward to the protruding front bumper with front-mounted winch.[47]

1943–1945 — 34-ton, G-502 and 112-ton, 6x6, G-507 WC series

Thumb
Stretching the G-502 (WC-51 / WC-52) cargo, troop, and weapon carriers with a third driven axle, produced the 112ton, 6x6, G-507, WC-62 and WC-63 w/winch (latter shown).

After the U.S. Army reorganized from using eight-troop rifle squads to twelve-men squads, a whole squad could no longer be carried as a unit in a single 34ton, 4x4, WC-51 or WC-52 truck. At the direction of Major General Courtney Hodges, Chief of Infantry, these G-502 troop- and weapons-carriers were therefore stretched in 1943, with an additional driven rear axle, to derive 48 in (1.22 m) longer 6-wheel drive, 112ton trucks.[48]

Using the same engine, gearbox, and cockpit, and sharing much of the other mechanicals, plus near-identical front-half sheet-metal as the 34-tons, the new 6x6, G-507, 112tons' main difference was the use of a dual-range transfer-case, sourced out of the prior 1940, 112ton VF-400 models, instead of the single-speed box of the12-tons and 34-tons.[12] The result were the WC-62 and WC-63 cargo, troop and weapons carriers, to move whole 12-troop squad teams per vehicle. Despite having individual drive-shafts from the transfer-case to each rear axle,[49] there is no way to disengage one of the rear axles to achieve 6x2 drive. The G-507 runs in either 6x4 or 6x6 configuration.[50]

The WC-63 was (just like the WC-52) equipped with a longer frame, housing an engine power take-off drive-shaft from the transfer-case forward, to drive a Braden MU2 winch, mounted on a 10 in (25 cm) more protruding front-bumper, reducing the approach angle. The winch capacity was originally rated at 5,000 lb (2,270 kg) pull-strength, but in late 1943 the wire rope size was upgraded from 38 in (9.5 mm) to 716 in (11 mm), the capacity rating was raised to 7,500 lb (3,400 kg), both on 34tons and the 6WDs.[12]

The chassis and certain other components were strengthened in the design of the new, longer, double the payload rated models, and many of these changes were incorporated back into subsequent production of the 34-ton G-502 models as well.[12] Although this caused some inconsistency in the mechanical uniformity of the 34-tons, it did keep parts the same as much as possible between the 34-tons and the new 112-tons, benefiting both the uniformity and ease of production of all the different models, as well as the 34tons, making them even more rugged from then on.

Further developments

Amphibious

Thumb
WC-62 armored car prototype (one built).

Twelve G-614 half-ton capacity, 4x4, XAC-2 / experimental 'Aqua-Cheetah', amphibious vehicles were built in 1942, by the Amphibian Car Corporation.[51] One unit was submitted to Britain for testing, (under Lend-Lease),[52] and the remaining eleven were subsequently rebuilt by the same firm, as G-552, XAC-3, amphibious 3/4ton trucks.[51] Both the 12tons and the 34tons were built based on Dodge WC series mechanicals. The vehicles performed well in testing, but neither Britain nor the U.S. decided to standardize them.[52]

Armored

A single armored car prototype was built, based on the 112ton, 6x6, Dodge WC-62.

Models table – overview

Thumb
Dodge VF-401 /-402 /-404 /-405 closed cab cargo
Quick Facts External image ...
Close

This table provides the relations between U.S. military and Dodge identification numbers, related to chassis payload classification in U.S. tons (907 kg), wheels and drive, and description of body / vehicle type, in accordance with the U.S. Army Ordnance Standard Nomenclature List (SNL) vehicle catalog.[41][53]

The U.S. government used vehicle (group) numbers starting with 'G-', whereas Dodge indicated models sharing the same technical configuration by a common 'T-' number, and their individual model numbers starting with two letters, like 'WC-'. The U.S. Army simply considered the 1941 half-ton Dodge WC series as evolutions of the initial 1940 VC series – all within the half-ton, 4x4, SNL G-505 truck range.

In the case of two model codes separated by a slash, the first code refers to the vehicle without a winch, and the second code, in bold print, to the same vehicle, on a longer frame, holding a front winch, typically resulting in a 10 in (25 cm) longer front overhang, and distinctly reduced approach angle. Not only were the winches driven by a power take-off from the engine,[9] but unlike the later Dodge M-series trucks, on which an extension was bolted to the frame when mounting a winch — on the WCseries the winch equipped versions were actually built on a different, longer frame.[54][55]

On the 112-ton rated VF-400 series trucks, the PTO-driven winch had a 10,000 pound capacity, but added almost 1,000 pounds to the vehicles weight, reducing the payload to 2400 pounds.[56]

Numbers separated by a comma indicate similar models but with different secondary details.

12-ton 4×4 – G-505 12-ton 4×2 34-ton 4×4 – G-502 112-ton 4×4 112ton 4×2 112-ton 6×6
T-202T-207T-211T-215G-613 / T-112T-214G-621 / T-203G-618 / T-118G-507 / T-223
Pick-up, closed cab, w. troop seatsVC-3WC-1WC-12WC-38, WC-47
Pick-up, closed cab, no rear seatsVC-4WC-5*WC-14*WC-40*, (WC-41)VF-401 / -402,
VF-404 / -405
Pick-up, open cab – cargo, troops, and weapons carriersVC-5WC-3 / WC-4WC-13WC-21 / WC-22WC-51 / WC-52WC-62 / WC-63
Carry-allVC-6WC-10WC-17WC-26WC-36, WC-48WC-53
Dump truckVF-403, -406
Command / ReconnaissanceVC-1WC-6 / WC-7WC-15WC-23 / WC-24WC-56 / WC-57
Radio truckVC-2WC-8WC-16WC-25, WC-42WC-58, (WC-54)
Panel VanWC-11WC-19WC-42WC-37, WC-49
Emergency Repair / maintenance workshopWC-14*, WC-20WC-40*, WC-41WC-60
Portee gun truck [nb 10]WC-55
AmbulanceWC-9WC-18WC-27WC-54, WC-64 (KD)VF-407
Telephone installation / maintenanceWC-43WC-39, WC-50WC-59, WC-61
Closed cab, bare chassisWF-31
Closed cab, stake & platformWF-32
* The WC-5, WC-14, and WC-40 were U.S. ordered, and accepted as 'Emergency Repair' – but by Dodge listed as 'pickup' built.

Engines and drivetrains

All engines were liquid-cooled, gasoline, straight-six Chrysler flathead engines. Recommended fuel octane rating for the initial T-207 WC half-tons was just 60–65, going by the dashboard data plate.[57]

Thumb
Dodge T-214 engine (TM photo)

The side-valve engines were mated to drive-trains of four-speed manual transmissions and a single-range transfer case, offering part-time four-wheel drive.[58][59] Only the drive-trains in the 112ton models, the 1940 T203, VF-400 trucks, and the 1943–1945, G-507, T223 six-wheel drives, had a dual-ratio transfer-case.[56][60] The low ratio on the 6x6, T223 transfer case gave a 1.5 : 1 reduction instead of the direct drive (1 : 1) high gear.[61]

The first batch of 1940, small half-ton (G505) Dodge VC models, (Dodge code T202) received a 201 cu in (3.3 L), 79 horsepower engine,[23] well above their initial commercial rating of 70 hp on the 1939 TC half-tons. The four-speed gearbox fitted, was a stock option on the civilian Dodges, and so were oil filters, oil-bath air cleaners, and heavy-duty generators.[62] The 1941 model-year T207-series trucks were again classed as G-505 half-tons, but these were powered by a 218 cu in (3.6 L) straight-six of 85 hp, taken from Dodge's 34- and one-ton commercial trucks. When the 1941 WC models were updated to T211 specifications, that initially remained so – but later T211s, and all of the final G505 half-ton WC series (the T215s), got a 230 cu in (3.8 L) L-head of 92 hp (SAE gross).[23]

From the mid 1941, T211 half-ton WC models onwards, to 1945, through the production of all 255,200 34ton T214 models, and the 43,200 1+12ton, T223, stretched six-wheel drive trucks, this 92 hp, 230 cu in (3.8 L) engine powered about 340,000 of all the Dodge WC series, basically unchanged.

More information Tech. code, From ...
Tech. codeFrom [63]Block size [64]BoreStrokeDisplacement [65][23]CompressionTorquePower
T-112194123 inch3+14 in (83 mm)4+38 in (111 mm)217.7 cu in (3,567 cm3)6.8:1 [66]170 lb⋅ft (230 N⋅m)
@ 1200 rpm [67]
85 hp (63 kW)
@ 3000 rpm [67]
T-118194125 inch3+716 in (87 mm)4+14 in (108 mm)236.6 cu in (3,877 cm3)190 lb⋅ft (258 N⋅m)
@ 1500–2200 rpm
104 hp (78 kW)
@ 3000 rpm [68]
T-202194023 inch3+18 in (79 mm)4+38 in (111 mm)201.3 cu in (3,299 cm3)6.7:1154 lb⋅ft (209 N⋅m) [69]79 hp (59 kW) [23]
@ 3000 rpm [70][37]
T-203194025 inch3+38 in (86 mm)4+12 in (114 mm)241.5 cu in (3,957 cm3)6.5:1188 lb⋅ft (255 N⋅m)
@ 1200 rpm
99 hp (74 kW)
@ 3000 rpm [71]
T-207late 194023 inch3+14 in (83 mm)4+38 in (111 mm)217.7 cu in (3,567 cm3)6.5:1170 lb⋅ft (230 N⋅m)
@ 1200 rpm [72]
85 hp (63 kW) [23]
@ 3000 rpm [72][70]
T-2111941
T-211 from
August 1941 [14]
23 inch3+14 in (83 mm)4+58 in (117 mm)230.2 cu in (3,772 cm3)6.7:1180 lb⋅ft (244 N⋅m)
@ 1200 rpm [73]
92 hp (69 kW) [23] gross
/ 76 hp (57 kW) net
@ 3200 rpm [74][75][70][18]
T-2141942
T-2151941
T-2231943
T-236 [76]194325 inch3+716 in (87 mm)4+14 in (108 mm)236.6 cu in (3,877 cm3)6.8:1182 lb⋅ft (247 N⋅m)
@ 1300 rpm (gross)
92.5 hp (69.0 kW) gross /
82.5 hp (61.5 kW) net
@ 3200 rpm
Close

Half-ton VC series

Thumb
The 1940 Dodge VC-1 / VC-2 Radio and Command Reconnaissance cars had a new body by Budd.
Thumb
The 1940 VC-6 Carry-all used this 1940 civilian panel-van body – with windows all-around, 4-wheel drive, and a front brush-guard. For 1941, this art deco body was used again, on the 4x2 drive WC-36 & WC-48 carry-alls, and the WC-37 / WC-49 panel vans.

The 1940 Dodge / Fargo VC models formed the first production run in the U.S. military's G-505 range of half-ton,[nb 11] light four-wheel drive trucks. Created by Chrysler, based on Dodge's lightest, new for 1939, commercial half-ton TC models of "express" pickups,[nb 12] and their carry-all,[37] the 1940 VC models formed the foundation for the subsequent 1941, G505, 12ton WC series trucks. (Dodge's naming system, back then, moved up the first letter alphabetically per model year, and the second letter tied to the truck's payload rating, based on chassis and components strength.)

All variants used the same 116 in (2.95 m) wheelbase as the shortest civilian trucks, but with the addition of part-time four-wheel drive. Bodywork and sheet metal on the military VC series pick-ups and carryall were the same as the civilian models — however, for the command reconnaissance and radio cars, a new, dedicated open five seater body was created, manufactured by Budd Company.[37]

Also the same 201.3 cu in (3.3 L) inline six, flathead engine was used, but Dodge raised its power output from a 70 hp (52 kW) rating in the 1939 civilian TC,[77][78] to 79 hp (59 kW) at 3000 rpm for their 1940 light VC models, and for the Army's G-505 VCs.[70][37] The transmission had 4 speeds, and the transfer case just one – it only shifted drive to the front axle, to engage or disengage four-wheel drive. On-road, it remained rear-wheel drive, to prevent binding that would damage the drivetrain while cornering, as there was no center differential.

The G-505 half-ton VC series came in six variants, numbered VC-1 to VC-6, and internally T-202 by Dodge:[37][1]

  • VC-1: Command Reconnaissance car – 2,155 units
  • VC-2: Radio Command Reconnaissance – 34 units
  • VC-3: Closed cab Pickup with bed seating for troops – 816 units
  • VC-4: Closed cab Pickup without bed seats – 4 units
  • VC-5: Open cab Pickup with bed seating for troops – 1,607 units
  • VC-6: Carry-all – 24 units

None of these trucks came with winches yet.

Delivered from early 1940 under a production contract, these 4,640 half-ton trucks were both the U.S. Army's first ever scale procurement of 'light' four-wheel drive vehicles – and their first light 4x4 trucks that military men called "jeeps" – as well as a part of Dodge's first official production contract for four-wheel drive trucks from the U.S. military. All prior sales, for the 1+12-ton trucks, although in the hundreds in 1934 and 1939, and even counting 1,700 in 1938, had been contracts for 'experimental' Army trucks.

Half-ton WC series

The half-ton, 4x4, Dodge WC series were evolutionary redesigns of the preceding VC series, retaining the military G-505 series code. Starting production in late 1940,[79][2] until replacement by the 3/4ton models in early 1942, they progressed through three mechanical engineering versions (T-207, T-211, and T-215), in barely a year and a half – while receiving the T-215 specification engine midway through production of the T-211 coded versions. Half-ton rated WC series models received thirty-eight numbers, roughly chronologically, in the WC-1 to WC-50 range, but skipping numbers WC-2, WC-28 to WC-35, and WC-44 to WC-46.

The WC series is immediately recognizable by its redesigned, now military sheet-metal. Wide-open, simplified front and rear fenders replaced the bulbous civilian ones, offering more wheel-travel, and less risk of wheels clogging stuck with thick mud in the wheel-well. The front brush-guard and grille were redesigned, replacing the civilian art-deco front with a single, integrated, upright, round welded grate.

The distribution across the versions was: [46]

  • 31,935 units of the WC-1 through WC-11 models, with the T-207 engineering code and a 217.7 cu in (3,567 cm3) engine with 85 hp (63 kW);
  • 17,293 units of the WC-12 through WC-20 models, with the T-211 engineering code and initially the same engine, however during August 1941 the T-211 engine was increased to 230.2 cu in (3,772 cm3) and 92 hp (69 kW), but the overall T-code number was not changed on affected models (e.g. WC-18) [14] [nb 13]
  • 28,537 units of the WC-21 through WC-27 and WC-40 through WC-43 model, with the T-215 engineering code and a 230.2 cu in (3,772 cm3) engine with 92 HP.

The T-207 range had an uprated 85 hp engine, and these units had front axles with Bendix-Weiss constant-velocity joints, whereas T-211 and T-215 models were given front axles either made by Bendix or with Rzeppa design CV joints, made by Ford.

From the T-211 models onwards, the rear brakes were 14-inch (360 mm) instead of 11-inch (280 mm) drums.[81] Among the T-211 versions, no single WC model number was explicitly used for winch-equipped units.

The T-215 types introduced a military design dashboard with round gauges, replacing the civilian dash with square ones.[14]

A further 1,542 rear-wheel drive units (engineering code T-112) were built as WC-36 through WC-39, and WC-47 through WC-50 — mostly carry-alls and pick-ups). These retained civilian bodywork, fenders and grilles, as well as regular front axles, and a one-ton on-road rating.

Thumb
Open cab pickups/weapon carriers were the most numerous of the 12ton WC series

Common specifications

  • Drive: four-wheel drive — except for WC-36 to WC-39 and WC-47 to WC-50
  • Wheelbase: 116 in (2.95 m) – both on four-wheel and two-wheel drive models
    • except 123 in (3.12 m) for ambulances and phone line / emergency repair trucks
  • Track width: front 59+38 in (1.51 m) and 61+38 in (1.56 m) rear
    • except just 55+34 in (1.42 m) front track on rear-wheel drive only models
  • Tires: 7.50×16 in
  • Brakes: Hydraulic
  • Engine: 6 cylinder, in-line, side valve engine
  • Transmission: manual, 4 forward / 1 reverse
  • Transfer case: Single speed

12-ton Ambulances

WC-9, WC-18, WC-27

Thumb
Dodge WC-9 Ambulance

Entering production during 1941 to early 1942,[82] they were specifically designed to serve as military ambulances. These early variants are distinguishable from the later ones by having a curved radiator grille, while the later ones (WC-51 onwards) featured a flat grille. These versions were given a longer 123 in (3,100 mm) wheelbase.

  • Length: 195 in (4.95 m)
  • Width: 75+1316 in (1.93 m)
  • Height: 90 in (2.29 m)
  • Weight: 5,340 lb (2,420 kg)
  • Payload: 1,300 lb (590 kg)

12-ton Carry-alls

Thumb
Half-ton Carry-all (4x4 pictured)

WC-10, WC-17, WC-26, WC-36, WC-48

Carryall trucks with a nominal carrying capacity of 1,000 lb (450 kg). The WC-10, WC-17 and WC-26 followed engineering patterns T-207, T-211 and T-215 respectively — whereas the WC-36 and WC-48 were T-112, rear-wheel drive only models, retaining civilian bodywork with bulbous fenders.

12-ton (Radio) Command Reconnaissance

Command / reconnaissance cars
Thumb
Lord Mountbatten, Allied Commander South East Asia, stands in a 12ton WC Command Car near Mandalay, 1945.
Thumb
Dodge WC-24 w. winch

WC-6, WC-15, WC-23

Command / reconnaissance cars.

WC-7, WC-24

Command / reconnaissance car with winch.

WC-8, WC-16, WC-25

Radio car / Command reconnaissance car with radio, 12 volt.

12-ton Trucks, Closed Cab

Thumb
Dodge WC-14 pickup 1941

WC-1, WC-5, WC-12, WC-14, WC-40

Closed cab, two seater pickups with a nominal carrying capacity of a 1,000 lb (450 kg). Some portion of these models were manufactured with winch,[83] at least of the WC-12, the WC-14 (pictured), and the WC-40, reducing the payload to 700 lb (320 kg) — but no distinct model number was assigned for such units. The WC-12's engine displacement was increased to the T-215's volume of 230.2 cu in (3,772 cm3) mid-series, after engine No. 42001.[83]

12-ton Trucks, Open Cab

Open cab 12-tons, w/wo winch
Thumb
WC-13 half-ton 4x4 with optional M24 machine gun mount.
Thumb
Dodge WC-4 open cab with winch.

WC-3, WC-13, WC-21

Weapon carriers, two seater pickups with open cab. The open cab pickups could be fitted with an optional M24 machine gun mount, which bolted across the front of the bed. The mount could carry the M1918 Browning Automatic Rifle, as well as the M1919 Browning machine gun, and the 0.5 in (12.7 mm) M2 Browning machine gun.

  • Length: 181+116 in (4.60 m)
  • Width: 75+1316 in (1.93 m)
  • Height: with top 88+18 in (2.24 m)
  • Weight: 4,440 lb (2,010 kg)
  • Payload: 1,300 lb (590 kg)

WC-4, WC-22

Open cab weapons carrier, with Braden MU winch, and transverse seats, designed to tow the 37mm M3 anti-tank gun as well as carry the gun crew and ammunition. This type was usually issued to early tank destroyer units. 5570 built.

  • Length: 191+516 in (4.86 m)
  • Width: 75+1316 in (1.93 m)
  • Height: with top 88+18 in (2.24 m)
  • Weight: 4,775 lb (2,166 kg) net
  • Payload: 1,000 lb (450 kg)

12-ton (Radio) Panel Vans

Thumb
Half-ton 4x4 basic panel van.

WC-11, WC-19, WC-42

Almost 1,400 panel van trucks, and panel van bodied radio communication cars. At first, regular panel van trucks were ordered: 642 units of WC-11,[79][84] and 103 units of WC-19.[80] The subsequent WC-42 panel vans were however furnished and equipped as radio communication cars. The 650 WC-42 radio panel vans almost outnumbered their bare transportation siblings, and they were also the only radio communication cars that Dodge built in a panel van body style in the entire VC and WC series range.

Almost half of production, 650 units, went to the British Empire under the U.S. Lend-Lease agreement.[85]

There were also negligible numbers made with civilian style bodywork, similar to the 1940 VC-6 Carryall, with only rear-wheel drive, with the T-112 (Dodge) and G-613 (U.S.) internal codes – six units of WC-37 (1941), and a further eight as WC-49, in 1942.

12-ton Telephone Service

Thumb
WC-43 K-50 phone service truck

WC-39, WC-43, WC-50

These models were built as technical service trucks for the U.S. Army Signal Corps, designed to install and repair hard telephone lines. Together with some earlier 12ton GMC/Chevrolet models, and the later 34ton WC-59 and WC-61, they were also known by the Signal Corps as the K-50 trucks.

Of the two-wheel drive WC-39 and WC-50, only a single unit of each were built, but the four-wheel drive WC-43 numbered 370 units.

12-ton Trucks, Emergency Repair

Thumb
M1 emergency repair truck, WC-41 — compare external picture here.

WC-5, WC-14, WC-20, WC-40, WC-41

Just over one thousand emergency repair chassis and trucks were ordered within the half-ton Dodge G-505, WC series.[79][80][86] The Dodge SNL G-657 Master Parts List doesn't explicitly list most of them as built to serve as emergency repair trucks, but the Summary Report of Acceptances, Tank-Automotive Materiel, 1940–1945, shows that at least 956 emergency repair chassis and trucks were received by the Army, involving at least all of the WC-14, WC-20, WC-40, and WC-41 models.[87][88]

Dodge delivered at least all thirty WC-20, and most of the WC-41 units, as closed cabs with a bare chassis, on a 123 in (312 cm) wheelbase, fitted with dual rear wheels, though a minority, particularly of the WC-5, WC-14, and WC-40s, were possibly built on a 116 in (295 cm) wheelbase; and some as pick-ups.[87] Most were furnished with third party utility service rear bodies, as M1 emergency repair trucks, to provide mobile facilities for emergency ordnance repair (G-061 / G-505). One other body-type was ordered: one T-211 oil servicing truck in 1941.[80]

More information U.S. Gvmt. Contract nr., Tech model ...
U.S. Gvmt. Contract nr.Tech modelUnits orderedVehicle / body type – as ordered [79][80][86]Units builtModel codeVehicle / body type – Dodge description [1]Units acceptedSummary Report of Acceptances model / type [89]
W-398-QM-8286 T-20760Emergency Repair60WC-5Closed cab pickup
W-398-QM-9388 T-211268Emergency Repair268WC-14Closed cab pickup298Emergency Repair, chassis
T-21130Emergency Repair, chassis30WC-20Closed cab – bare chassis
W-398-QM-10327 T-215275Emergency Repair275WC-40Closed cab pickup275Emergency Repair
W-398-QM-10327 T-215267Emergency Repair, chassis267WC-41Closed cab – bare chassis54(Closed cab) chassis [51]
213Chassis, Emergency Repair
W-398-QM-11244 T-21539Emergency Repair39WC-41Closed cab39Emergency Repair, chassis
W-398-QM-11592 T-21577Emergency Repair, chassis77WC-41Emergency Repair, cab & chassis77Emergency Repair, chassis
Close

Three-quarter-ton models

Three-quarter ton WC series
Thumb
The ≈190,000 WC51 & WC52 trucks (shown) make up half of the total of ≈380,000 different WC-series built.
Thumb
Top view of WC-55 (a version of the WC51 / WC52) shows the squat, short and wide stance, proportions of the revised 34ton Dodges

By late 1941, the Dodge WC range was significantly revised. All four-wheeled models were reinforced and uprated for a nominal three-quarter ton off-road payload; and later, for 1943, a stretched six-wheel drive, 112-ton rated variant was developed.

All models were widened to front and rear tracks of 64+34 in (1.64 m), widening the front track by as much as 5+38 in (14 cm), and the rear track by 3+38 in (8.6 cm) on most models. The new axles were not only the same width, but also got the same differentials and axle carriers. The tires were widened from 7.50×16 to 9 inches (from 19 cm to 23 cm) wide. moreover, the bulk production variants were significantly shortened, giving the vehicles much more square proportions, like on their younger 14ton brothers. On all the troops & weapons carriers, and command / reconnaissance & radio trucks, the wheelbase were all cut by almost half a meter (18 in / 46 cm), from a 116 in (2.95 m) to a 98 in (2.49 m) wheelbase. Only ambulances, carry-alls, and technical service trucks kept a long wheelbase. Panel vans were dropped from the range and no longer made.

The big volume models (the WC-51/-52, and the WC-56/-57/-58) also got literally more square bodies, and overall length to width ratios. The integrated grille / brush-guard became straight, and the hoods (bonnets) became lower and wider, and were flattened – both as in losing their previous curvature, and now just being horizontal – so they became more useful as an improvised table-top, and the front windows / windshields on these models could now also be folded forward, to lay flat on their hoods, just like on the 14-ton jeeps. Under the hood, the 34-tons kept the 6-cylinder inline, L-head engine of 92 hp (73 kW) gross, from the later model halfton WC series.

The biggest volume production variants, the WC-51 and-52 pick-up / troops and weapons-carrier models, received a completely redesigned rear bed, that mostly consisted of two longitudinal, rectangular boxes, that integrated the rear wheel wells with under-seat stowage compartments fore and aft of the rear wheels, while now seating the troops sideways and on top of the rear wheels, facing each other, instead of a in a commercial, "step-side" bed, in between the wheels. The new bed/box design widened these models to 6 ft 11 in (2.11 m), and offered much more space for the troops' backpacks and gear, between their feet, and under the seats. A single such truck, at just 13 ft 11 in (4.24 m) long (or 14 ft 9 in / 4.48 m with winch), offered practical all-terrain transportation for a full eight man rifle squad, their weapons and gear.

With the nickname 'jeep' now moving on to the smaller 14ton trucks, some soldiers called the Dodges 'Beeps' (for "Big jeep") instead.[90]

Eventually, almost half of the more than fifty different WC series models manufactured – almost 183,000 trucks – were WC51 & WC52 cargo/troop and weapons carriers — and one third of those with an engine-powered front winch.

34-ton Ambulances

WC-54

Thumb
1943 WC-54 Ambulance

The WC-54 Truck, 3/4 ton, 4×4 Ambulance, Dodge (G-502), was produced as an ambulance, but a few were modified to serve as radio/telephone trucks with the US Signal Corps. A total of 26,002 WC-54 units were built from 1942 through 1944, after which the ambulance was redesigned, and replaced by the WC-64 in 1945.[91][92]

  • Length: 16 ft 3 in (4.95 m)
  • Width: 6 ft 6 in (1.98 m)
  • Height: 7 ft 6 in (2.29 m)
  • Weight: 5,920 lb (2,685 kg)
  • Payload: 1,800 lb (820 kg)
Thumb
Dodge WC-64 Ambulance

WC-64

The WC-64 KD Truck, 3/4 ton, 4x4 Ambulance Dodge (G-502) was an ambulance based on the same chassis as the WC-54 but with a knock-down body designed to increase the number of vehicles that could be shipped at the same time. The rear boxes were supplied in two major parts: lower and upper. The lower part of the box was attached to the chassis at the factory, while the upper box was crated for installation in the field.[93] 3,500 Knock-down ambulances were built between the beginning of 1945 and the end of the war,[94] the great majority (2,531 units) went to allies under lend-lease:[85]

  • 1,123 to the Free French forces
  • 644 to British Commonwealth
  • 475 to China
  • 149 to Brazil and 82 to other Latin American republics

34-ton Carryall

WC-53 Carry-all
Thumb
Thumb
Split tailgate shown on rear

WC-53

A carryall, mechanically the WC-53 was virtually identical to the WC-54 but was fitted with a body which was the 1939 civilian carryall modified to military specifications. All four rear side windows were wind-up opening and the seating consisted of front folding passenger seat to allow rear access, two person second row leaving space to access to the rear full width three person seat. The spare wheel was carried on a mount on the driver's side and although the door was fully operational it could not be opened and the driver had to enter from the passenger side. The rear end had a horizontally split tailgate.[95][96]
WC-53s were also fitted as radio trucks with a bench on the left side with the operator seated sideways. 8,400 WC-53: Truck, 3/4 ton, 4×4 Dodge Carryall (G-502) were built. No carryalls came from the factory with a winch, though there was a field modification available.[97]

  • Length: 15 ft 6 in (4.72 m)
  • Width: 6 ft 7 in (2.01 m)
  • Height: 6 ft 8 in (2.03 m)
  • Weight: 5,700 lb (2,590 kg)
  • Payload: 1,750 lb (790 kg)

34-ton (Radio) Command Reconnaissance

WC-56

Thumb
Rear of command car, desert tan
Thumb
The WC-56 was wider and much shorter than the 12ton command cars, giving it squat proportions.

The WC-56 Truck, Command Reconnaissance, 3/4 ton, 4x4 w/o Winch, Dodge (G-502) was a command and reconnaissance vehicle akin to a large quarter-ton jeep. It did not prove popular as it was heavier and not as maneuverable as the jeep, and its distinctive profile made it a target. The soft-top included side-curtains, for better weather shielding. 21,156 units were built.[98][92]

  • Length: 13 ft 10 in (4.22 m)
  • Width: 6 ft 7 in (2.00 m)
  • Height: 6 ft 9 in (2.07 m)
  • Weight: 5,335 lb (2,420 kg)
  • Payload: 1,750 lb (800 kg)

WC-57

Thumb
Unlike jeeps, the Dodge command cars' soft-top included canvas sides (WC-57 with winch).

The WC-57 Truck, Command Reconnaissance, 3/4 ton, 4x4 w/Winch Dodge (G-502) was identical to the WC-56, but fitted with a Braden MU2 7,500 lb (3,402 kg) capacity winch at the front bumper. 6,010 units built.[98][92]

  • Length: 14 ft 8 in (4.46 m)
  • Width: 6 ft 7 in (2.00 m)
  • Height: 6 ft 9 in (2.07 m)
  • Weight: 5,644 lb ( 2,560 kg)
  • Payload: 1,750 lb (800 kg)

WC-58

The WC-58 Truck, Radio, 3/4 ton, 4×4 w/o Winch, Dodge (G-502) was identical to the WC-56 Command / Reconnaissance Car, but fitted with a Signal Corps Radio set in front of the rear seat, and a 12-volt electrical system.[99] Some WC-58 models may have been built, based on the WC-57 with winch, as well.[18][100] A total of 2,344 radio equipped units were built,[101] but it is unclear whether these were included as part of the WC-56 / WC-57 production, or constituted an additional 2,344 WC-58 radio car units.

  • Length: 13 ft 10 in (4.22 m) / 14 ft 7 in (4.46 m) with winch
  • Width: 6 ft 7 in (2.00 m)
  • Height: 6 ft 9 in (2.07 m)
  • Weight: 5,644 lb (2,560 kg)
  • Payload: 1,750 lb (800 kg)

34-ton Trucks, Weapons Carrier

WC-51 and WC-52

Thumb
With its top and bows down, the WC-51/52 followed the low-profile design doctrine – in Russian called the "Dodge 3/4"[17]UMMC Museum of Military and Automotive Equipment, Verkhnyaya Pyshma, Russia.
Thumb
Up to ten troops would fit in a WC-51 or WC-52. Shown WC-52 is identical to the WC-51, but with a power take-off front winch.

The G-502, WC-51 & WC-52: "Truck, Cargo, 34-ton, 4x4, Weapons Carrier" (T-214; from early 1942), had largely redesigned bodies and frames, compared to their half-ton, 1940–1941 forebears, yet retained mechanically as much as possible — improving what was necessary, while maintaining supply, logistics, and training continuity. The design was now blatantly more jeep-like, with a much shorter, lower, wider, versatile, open cab pickup body. The hood became flat and horizontal, and the windshield could now also be folded forward, flat on it. With the top and bows down, the WC-51 and -52 followed the low-profile design doctrine of the time. Engine and drive-train were almost completely carried over from the T-215 half-tons, except for the uprated, wider track axles (64+34 in (1.64 m)), which were now 18 in (46 cm) closer together, for a 98 in (2.49 m) wheelbase.

The WC-51 and -52 could be fitted with an optional M24A1 machine gun mount, or other devices. The M24A1 mount bolted across the front of the bed, and could carry the M1918 Browning Automatic Rifle, the M1919 Browning machine gun, or the M2 Browning machine gun. Lack of a winch gave the WC-51 a 10 in (25 cm) shorter front overhang, and thus a better approach angle. The WC-52 not only differed from the WC-51 by having a power take-off driven Braden MU2 7,500 lb (3,400 kg) capacity winch on the front bumper, but to accommodate it, the WC-52 was actually built on its own, longer frame. With about every third unit carrying a winch, these were thus rarely ever retrofitted.

Almost three quarters of Dodge's 255,195 total 34ton, G-502, WC series production, were built as WC-51 and WC-52, cargo, troops and weapon carriers. 123,541 were built without winch as the WC-51, and 59,114 with a front winch as WC-52 — for a total of 182,655 units.[15] When adding the 5,380 WC-55, M6 gun motor carriages, that were later downgraded back to WC-52 specification, it brings the total number to over 188,000 of these models. Although nearly a quarter of that (44,229) were passed on to allies, mostly through Lend-Lease, once the 1939 U.S. Army reorganization from 8man to 12man (rifle) squads got tied more closely into troop-car procurement, Dodge received orders for a similar amount (43,224 built) of the stretched, 12troop (one squad) capacity, WC-62 & WC-63, 112ton, 6x6 trucks.

Thumb
WC-51 cabin interior
  • Length: 13 ft 11 in (4.24 m), or 14 ft 8.5 in (4.48 m) with winch
  • Width: 6 ft 11 in (2.11 meters)
  • Height (with canvas cover): 6 ft 10 in (2.08 m)
  • Height (with top down): 5 ft 2 in (1.57 m)
  • Weight: 5,250 lb (2,382 kg) net – 5,550 lb (2,518 kg) net with winch
  • Payload: 1,750 lb (800 kg)
  • Tires: 9.00 x 16 in., 8ply

A substantial amount – almost a quarter – of all the 34ton weapons carriers (a total of 44,229 WC-51 and WC-52 trucks), were provided through Lend-Lease to various Allies:[85]

  • 24,902 to the Soviet Union, who used some to pull their ZiS-3 76-mm anti-tank guns,[15]
  • 10,884 to Britain
  • 3,711 to China
  • 3,495 to the Free French forces
  • 954 to Brazil and 204 to other Latin American countries

34-ton truck, M6 gun motor carriage

Thumb
WC-55, M6 gun motor carriage

WC-55

The M6 37 mm gun motor carriage, 3/4-ton, 4×4 (abbreviated as M6 GMC), or fully described "M6 Fargo gun motor carriage with 37 mm anti-tank gun," (by Dodge numbered WC-55), was a modified G-502 Dodge WC-52, designed and built to carry an M3A1 37mm anti-tank gun combined with gun shield, mounted on its cargo bed, facing rearward. The WC-55 with gun combination was designated by Standard Nomenclature List supply catalog number G-121. A total of 5,380 were built by Fargo in 1942,[102] but most were later dismantled / downgraded and returned to service as WC-52 cargo trucks.

Fielded as a stopgap design from late 1942 in North Africa, in limited use with the US Army Tank Destroyer Battalions, and in the Pacific War in 1943/1944, improvements in enemy tanks quickly rendered the 37mm gun underpowered, and better guns became available. The WC-55 was first downgraded to "limited standard" in 1943, and subsequently declared obsolete, finally by early 1945.

  • Length: 14 ft 812 in (4.48 m)
  • Width: 7 ft 2 in (2.18 m)
  • Height: 8 ft 2 in (2.49 m) to top of gun shield
  • Weight: 5,600 lb (2 540 kg)
  • Storage: 80 rounds of 37mm munitions

34-ton Telephone Service

WC-59

Thumb
WC-59, 34-ton K-50 telephone truck with ladder on side.

The WC-59 Truck, Telephone Maintenance, 3/4 ton, 4×4 Dodge (G-502) was designed to install and repair telephone lines. Based on the same chassis as the WC-54 ambulances, sharing a 23 in (58 cm) longer wheelbase than the regular 34ton WC series. The spare wheel was carried behind the seats, and a step ladder fitted where the spare wheel normally would have been. 549 units were built. The bespoke bed made it a K-50 truck to the Signal Corps. These were initially fitted to both Dodge and Chevrolet chassis.

  • Length: 16 ft 0 in (4.88 m)
  • Width: 6 ft 6 in (1.98 m)
  • Height: 6 ft 9 in (2.06 m)
  • Weight: 5,357 lb (2,430 kg)
  • Payload: 1,750 lb (800 kg)

WC-61

Thumb
WC-61 / K-50B truck

The WC-61 Light Maintenance Truck, 3/4 ton, 4×4 Dodge (G-502) was also designed to install and repair telephone lines. Replacement for the WC-59, the WC-61 had the step ladder mounted on the roof, the spare wheel was still fitted behind the seats, and the tool trunks were accessible from the outside. Just 58 were built. The US Signal Corps referred to these as the K-50B truck.

  • Length: 15 ft 6 in (4.73 m)
  • Width: 6 ft 10 in (2.08 m)
  • Height (without ladder): 7 ft 5 in (2.26 m)
  • Weight: 5,952 lb (2,700 kg)
  • Payload: 1,750 lb (800 kg)

34-ton Truck, Emergency Repair

WC-60

Thumb
Dodge WC-60 Emergency Repair Chassis, M2

The WC-60 chassis, fitted with a bed similar to the WC-61 by the American Coach and Body Co. of Cleveland, Ohio, formed the M2 Emergency Repair truck, 3/4 ton, 4×4 Dodge (SNL supply code G-061), a mobile workshop designed for field maintenance. Its open-topped service-type bed featured numerous tool trunks and stowage bins, accessible from the outside. 296 units were built.

  • Length: 15 ft 6 in (4.73 m)
  • Width: 6 ft 10 in (2.08 m)
  • Height: 7 ft 5 in (2.26 m)
  • Weight: 5,952 lb (2 700 kg)
  • Payload: 1,750 lb (800 kg)

One-and-a-half-ton models

G-507, 112-ton, 6x6 trucks
Thumb
WC-62without winch
Thumb
WC-63with winch
Thumb
WC-62 / WC-63 cabin interior

WC-62

The G-507 Cargo and Personnel Carrier, 112-ton, 6x6 Truck, Dodge (WC-62 w/o Winch) was based on a lengthened WC-51 Weapons Carrier with an extra axle added. When the U.S. Army enlarged rifle squads from eight to twelve men, the 34ton no longer sufficed, and a 48-inch (1.22 m) longer 6×6 variant was created that used most of the mechanical parts and the whole front sheet metal and cabin of the G-502. The G-507 trucks could be driven by all six wheels (6x6) or by the four rear wheels only (6×4).[103]

A number of components needed further strengthening in this design, and many of these reinforcements were also incorporated in subsequent 34tons production – both making these even more robust, as well as benefiting the spare parts and supply-chain, by keeping the most future parts suitable and interchangeable on the 34tons and the 1+12tons. Six-wheel drive production amounted to 43,224 units total,[5] — 23,092 WC-62 units without winch, and 20,132 WC-63 variants with winch.[92][4] One prototype was produced as an armored car.[104]

A total of 6,344 WC-62 and WC-63 cargo trucks were provided to World War II Allies — 4,074 to the Free French forces, 2,123 to British, and 137 units to Brazil.[85]

  • Length: 17 ft 11 in (5.47 m)
  • Width: 6 ft 11 in (2.11 m)
  • Height (with canvas cover): 7 ft 3 in (2.21 m)
  • Height (with top down): 5 ft 2 in (1.57 m)
  • Weight: 6,925 lb (3,141 kg)
  • Payload: 3,300 lb (1,500 kg)

WC-63

The WC-63 Truck, Cargo and Personnel Carrier, 112 ton, 6×6 with Winch, Dodge (G-507) Weapons Carrier was based on a lengthened WC-52 with an extra axle added. Identical to the WC-62 but fitted with a PTO-powered Braden MU2 winch, initially of 5,000 lb (2,300 kg), later 7,500 lb (3,400 kg) capacity.

  • Length: 18 ft 9 in (5.72 m)
  • Width: 6 ft 11 in (2.10 m)
  • Height (with canvas cover): 7 ft 3 in (2.21 m)
  • Height (with top down): 5 ft 2 in (1.57 m)
  • Weight: 7,175 lb (3,250 kg)
  • Payload: 3,300 lb (1500 kg)

Comprehensive models table

The table below lists the comprehensive set of models in the Dodge WC series family showing the different codes that were assigned together with each model's core specifications. [nb 14]

Different colors have been used to code groupings for maximum convenience, based on nominal payload rating, model family, and wheels and drive.

Lend-lease models (mainly for Russia), and Canadian-built models are presented in red, at the bottom.

More information Payload rating, US Army SNL-nr. ...
Table of Dodge VC and WC series vehicles, codes and specifications
Payload ratingDodge modelUS Army SNL-nr.Dodge
T-code
Wheels & driveU.S. Mil.
body code [105]
Model and body descriptionWinchYearsNumber builtWheel baseLengthWidthHeightPayload
12-ton VC-1 G-505T-2024×4 USM-BT-15 Command reconnaissance19402,155116 in (2.95 m)188 in (4.78 m)74 in (1.88 m)83+38 in (2.12 m)945 lb (429 kg)
12-ton VC-2 G-505T-2024×4 USM-BT-15 Radio command reconnaissance194034116 in (2.95 m)188 in (4.78 m)74 in (1.88 m)83+38 in (2.12 m)
12-ton VC-3 G-505T-2024×4 USM-BT-5 Pick-up, closed cab, with troop seats1940816116 in (2.95 m)188 in (4.78 m)74 in (1.88 m)88 in (2.24 m)
12-ton VC-4 G-505T-2024×4 USM-BT-5 Pick-up, closed cab, no bed seats19404116 in (2.95 m)188 in (4.78 m)74 in (1.88 m)88 in (2.24 m)
12-ton VC-5 G-505T-2024×4 USM-BT-9 Pick-up, open cab / Weapon Carrier; transverse seats19401,607116 in (2.95 m)188 in (4.78 m)74 in (1.88 m)88 in (2.24 m)
12-ton VC-6 G-505T-2024×4 USM-BT-7 Carry-all194024116 in (2.95 m)74 in (1.88 m)84+18 in (2.14 m)
12-ton WC-1 G-505T-2074×4 USM-BT-6 Pick-up, closed cab; longitudinal seats19412,573116 in (2.95 m)181+116 in (4.60 m)75+1316 in (1.93 m)88.2 in (2.24 m)1000 lb / 1300 lb [nb 15]
12-ton WC-3 G-505T-2074×4 USM-BT-10 Pick-up, open cab / Weapon Carrier; transverse seats19417,808116 in (2.95 m)181+116 in (4.60 m)75+1316 in (1.93 m)88+18 in (2.24 m)1,000 lb (450 kg)
12-ton WC-4 G-505T-2074×4 USM-BT-10 Pick-up, open cab / Weapon Carrier; transverse seatsw / winch19415,570116 in (2.95 m)191+516 in (4.86 m)75+1316 in (1.93 m)88+18 in (2.24 m)1,000 lb (450 kg)
12-ton WC-5 G-505T-2074×4 USM-BT-6 Pick-up, closed cab; no bed seating194160116 in (2.95 m)181+116 in (4.60 m)75+1316 in (1.93 m)88.2 in (2.24 m)1000 lb / 1300 lb [nb 15]
12-ton WC-6 G-505T-2074×4 USM-BT-17 Command reconnaissance19419,365116 in (2.95 m)178+1116 in (4.54 m)75+1316 in (1.93 m)83+38 in (2.12 m)1,000 lb (450 kg)
12-ton WC-7 G-505T-2074×4 USM-BT-17 Command reconnaissancew / winch19411,438116 in (2.95 m)189+316 in (4.81 m)75+1316 in (1.93 m)83+38 in (2.12 m)700 lb (320 kg)
12-ton WC-8 G-505T-2074×4 USM-BT-17 Radio command reconnaissance1941548116 in (2.95 m)178+1116 in (4.54 m)75+1316 in (1.93 m)83+38 in (2.12 m)1,000 lb (450 kg)
12-ton WC-9 G-505T-2074×4 USM-BT-19 Ambulance19412,288123 in (3.12 m)195 in (4.95 m)76 in (1.93 m)90 in (2.29 m)1,000 lb (450 kg)
12-ton WC-10 G-505T-2074×4 USM-BT-7 Carry-all19411,643116 in (2.95 m)183+78 in (4.67 m)75+1316 in (1.93 m)84+18 in (2.14 m)1,000 lb (450 kg)
12-ton WC-11 G-505T-2074×4 USM-BT-13 Panel van1941642116 in (2.95 m)183+78 in (4.67 m)75+1316 in (1.93 m)84+18 in (2.14 m)1,000 lb (450 kg)
12-ton WC-12 G-505T-2114×4 USM-BT-6 Pick-up, closed cab19416,047116 in (2.95 m)181+116 in (4.60 m)75+1316 in (1.93 m)88.2 in (2.24 m)1000 lb / 1300 lb [nb 15]
12-ton WC-13 G-505T-2114×4 USM-BT-10 Pick-up, open cab / Weapon Carrier19414,019116 in (2.95 m)181+116 in (4.60 m)75+1316 in (1.93 m)88+18 in (2.24 m)1000 lb / 1300 lb [nb 15]
12-ton WC-14 G-505T-2114×4 USM-BT-6 Pick-up, closed cab / Emergency Repair [nb 16]1941268116 in (2.95 m)181+116 in (4.60 m)75+1316 in (1.93 m)88.2 in (2.24 m)1000 lb / 1300 lb [nb 15]
12-ton WC-15 G-505T-2114×4 USM-BT-17 Command reconnaissance19413,980116 in (2.95 m)178+1116 in (4.54 m)75+1316 in (1.93 m)83+38 in (2.12 m)1,000 lb (450 kg)
12-ton WC-16 G-505T-2114×4 USM-BT-17 Radio command reconnaissance19411,284116 in (2.95 m)178+1116 in (4.54 m)75+1316 in (1.93 m)83+38 in (2.12 m)1,000 lb (450 kg)
12-ton WC-17 G-505T-2114×4 USM-BT-7 Carry-all1941274116 in (2.95 m)183+78 in (4.67 m)75+1316 in (1.93 m)84+18 in (2.14 m)1,000 lb (450 kg)
12-ton WC-18 G-505T-2114×4 USM-BT-19 Ambulance19411,555123 in (3.12 m)195 in (4.95 m)76 in (1.93 m)90 in (2.29 m)1,000 lb (450 kg)
12-ton WC-19 G-505T-2114×4 USM-BT-13 Panel van1941103116 in (2.95 m)183+78 in (4.67 m)75+1316 in (1.93 m)84+18 in (2.14 m)1,000 lb (450 kg)
12-ton WC-20 G-061T-2114×4 USM-BT-1 Emergency repair, M1, Closed cab chassis194130123 in (3.12 m)187+38 in (4.76 m)91+12 in (2.32 m)81+116 in (2.06 m)1420 lb / 2170 lb [nb 15]
12-ton WC-21 G-505T-2154×4 USM-BT-10 Pick-up, open cab / Weapon Carrier; transverse seats1941–194214,287116 in (2.95 m)181+116 in (4.60 m)75+1316 in (1.93 m)88+18 in (2.24 m)1000 lb / 1300 lb [nb 15]
12-ton WC-22 G-505T-2154×4 USM-BT-10 Pick-up, open cab / Weapon Carrierw / winch19411,900116 in (2.95 m)191+516 in (4.86 m)75+1316 in (1.93 m)88+18 in (2.24 m)1000 lb / 1300 lb [nb 15]
12-ton WC-23 G-505T-2154×4 USM-BT-17 Command reconnaissance1941–19422,637116 in (2.95 m)178+1116 in (4.54 m)75+1316 in (1.93 m)83+38 in (2.12 m)1000 lb / 1300 lb [nb 15]
12-ton WC-24 G-505T-2154×4 USM-BT-17 Command reconnaissancew / winch1941–19421,412116 in (2.95 m)189+316 in (4.81 m)75+1316 in (1.93 m)83+38 in (2.12 m)700 lb / 1300 lb [nb 15]
12-ton WC-25 G-505T-2154 x 4 USM-BT-17 Radio command reconnaissance1941–19421,630116 in (2.95 m)178+1116 in (4.54 m)75+1316 in (1.93 m)83+38 in (2.12 m)1000 lb / 1300 lb [nb 15]
12-ton WC-26 G-505T-2154 x 4 USM-BT-7 Carry-all1941–19422,900116 in (2.95 m)183+78 in (4.67 m)75+1316 in (1.93 m)84+18 in (2.14 m)1000 lb / 1300 lb [nb 15]
12-ton WC-27 G-505T-2154×4 USM-BT-19 Ambulance1941–19422,579123 in (3.12 m)195 in (4.95 m)76 in (1.93 m)90 in (2.29 m)1,300 lb (590 kg)
12-ton WC-36 G-613T-1124×2 USM-BT-7 Carry-all1941400116 in (2.95 m)191+38 in (4.86 m)74.5[66] in (1.89 m)80[66] in (2.03 m)1,000 lb (450 kg)
12-ton WC-37 G-613T-1124×2 USM-BT-14* Panel van — VC model civilian body19416116 in (2.95 m)183+78 in (4.67 m)75+1316 in (1.93 m)84+18 in (2.14 m)1,000 lb (450 kg)
12-ton WC-38 G-613T-1124×2 USM-BT-5* Pick-up, closed cab – VC model civilian body1941362116 in (2.95 m)185+516 in (4.71 m)74.5 in (1.89 m)74+716 in (1.89 m)1,000 lb (450 kg)
12-ton WC-39 G-613T-1124×2 USM-BT-12 Telephone installation, K-5019411116 in (2.95 m)
12-ton WC-40 G-505T-2154×4 USM-BT-6 Pick-up, closed cab / Emergency Repair [nb 16]1941275116 in (2.95 m)181+116 in (4.60 m)75+1316 in (1.93 m)88.2 in (2.24 m)1000 lb / 1300 lb [nb 15]
12-ton WC-41AG-505T-2154×4 USM-BT-6 Pick-up, closed cab / Emergency Repair [nb 16]194139116 in (2.95 m)181+116 in (4.60 m)75+1316 in (1.93 m)88.2 in (2.24 m)1000 lb / 1300 lb [nb 15]
12-ton WC-41BG-061T-2154×4 USM-BT-1 Emergency repair, M1, Closed cab chassis1941–1942306123 in (3.12 m)187+38 in (4.76 m)91+12 in (2.32 m)81+116 in (2.06 m)1420 lb / 2170 lb [nb 15]
12-ton WC-42 G-505T-2154×4 USM-BT-13 Radio – Panel van1942650116 in (2.95 m)183+78 in (4.67 m)75+1316 in (1.93 m)84+18 in (2.14 m)1000 lb / 1300 lb [nb 15]
12-ton WC-43 G-505T-2154×4 USM-BT-12 Telephone installation, K-501942370116 in (2.95 m)
12-ton WC-47 G-613T-1124×2 USM-BT-5* Pick-up, closed cab — VC model civilian body1942390116 in (2.95 m)185+516 in (4.71 m)74.5 in (1.89 m)74+716 in (1.89 m)1,000 lb (450 kg)
12-ton WC-48 G-613T-1124×2 USM-BT-7 Carry-all1942374116 in (2.95 m)191+38 in (4.86 m)74.5[66] in (1.89 m)80[66] in (2.03 m)1,000 lb (450 kg)
12-ton WC-49 G-613T-1124×2 USM-BT-14* Panel van — VC model civilian body19428116 in (2.95 m)183+78 in (4.67 m)75+1316 in (1.93 m)84+18 in (2.14 m)1,000 lb (450 kg)
12-ton WC-50 G-613T-1124×2 USM-BT-12 Telephone installation, K-5019421116 in (2.95 m)
34-ton WC-51 G-502T-2144×4 USM-BT-11 Pick-up, open cab / Weapon Carrier1942–1945123,54198 in (2.49 m)166+78 in (4.24 m)82+34 in (2.10 m)81+78 in (2.08 m)1,500 lb (680 kg)
34-ton WC-52 G-502T-2144×4 USM-BT-11 Pick-up, open cab / Weapon Carrierw / winch1942–194559,11498 in (2.49 m)176.5 in (4.48 m)82+34 in (2.10 m)81+78 in (2.08 m)1,500 lb (680 kg)
34-ton WC-53 G-502T-2144×4 USM-BT-8 Carry-all1942–19438,400114 in (2.90 m)185+58 in (4.71 m)78+58 in (2.00 m)80+14 in (2.04 m)1,800 lb (820 kg)
34-ton WC-54 G-502T-2144×4 USM-BT-20 Ambulance1942–194426,002121 in (3.07 m)194.5 in (4.94 m)77+34 in (1.97 m)90+38 in (2.30 m)1,800 lb (820 kg)
34-ton WC-55 G-121T-2144×4 USM-BT-11 Pick-up, open cab "M6 gun motor carriage"w / winch19425,38098 in (2.49 m)178 in (4.52 m)88 in (2.24 m)82 in (2.08 m)1,200 lb (540 kg)
34-ton WC-56 G-502T-2144×4 USM-BT-16 Command reconnaissance1942–194421,15698 in (2.49 m)165+34 in (4.21 m)78+58 in (2.00 m)81.5 in (2.07 m)1500 lb / 1800 lb [nb 15]
34-ton WC-57 G-502T-2144×4 USM-BT-16 Command reconnaissancew / winch1942–19446,01098 in (2.49 m)175+58 in (4.46 m)78+58 in (2.00 m)81.5 in (2.07 m)1500 lb / 1800 lb [nb 15]
34-ton WC-58 G-502T-2144 x 4 USM-BT-16 Radio command reconnaissanceunclear19422,344 [nb 17]98 in (2.49 m)165+34 in (4.21 m)78+58 in (2.00 m)81.5 in (2.07 m)1500 lb / 1800 lb [nb 15]
34-ton WC-59 G-502T-2144 x 4 USM-BT-21 Telephone installation, K-501942–1943549121 in (3.07 m)191.5 in (4.86 m)77.5 in (1.97 m)80+58 in (2.05 m)500 lb / 1210 lb [nb 15]
34-ton WC-60 G-061T-2144×4 USM-BT-22 Emergency repair, M2, Closed cab chassis1943300121 in (3.07 m)186 in (4.72 m)81.5 in (2.07 m)88.5 in (2.25 m)2,170 lb (980 kg)
34-ton WC-61 G-502T-2144×4Phone / Maintenance, K-50B194358121 in (3.07 m)191+1332 in (4.86 m)77+34 in (1.97 m)80+1116 in (2.05 m)1,300 lb (590 kg)
34-ton WC-64 G-502T-2144×4Ambulance, Knock-down19453,500121 in (3.07 m)191.5 in (4.86 m)82+34 in (2.10 m)90+34 in (2.31 m)1,500 lb (680 kg)
112-ton VF-401 G-621T-2034×4USM-BT-3Pick-up / cargo, closed cab19403,122143 in (3.63 m)223+38 in (5.67 m)86 in (2.18 m)111+78 in (2.84 m)3,000 lb (1,400 kg)
112-ton VF-402 G-621T-2034×4USM-BT-3Pick-up / cargo, closed cabw / winch1940491143 in (3.63 m)233+112 in (5.92 m)86 in (2.18 m)111+78 in (2.84 m)2,400 lb (1,100 kg)
112-ton VF-403 G-621T-2034×4USM-BT-4Dump truck, closed cab1940323143 in (3.63 m)225+332 in (5.72 m)85 in (2.16 m)113.5 in (2.88 m)3,000 lb (1,400 kg)
112-ton VF-404 G-621T-2034×4USM-BT-3Pick-up / cargo, closed cab19401,956143 in (3.63 m)223+38 in (5.67 m)86 in (2.18 m)111+78 in (2.84 m)3,000 lb (1,400 kg)
112-ton VF-405 G-621T-2034×4USM-BT-3Pick-up / cargo, closed cabw / winch1940509143 in (3.63 m)233+112 in (5.92 m)86 in (2.18 m)111+78 in (2.84 m)2,400 lb (1,100 kg)
112-ton VF-406 G-621T-2034×4USM-BT-4Dump truck, closed cab194067143 in (3.63 m)225+332 in (5.72 m)85 in (2.16 m)113.5 in (2.88 m)3,000 lb (1,400 kg)
112-ton VF-407 G-621T-2034×4USM-BT-18Ambulance19403143 in (3.63 m)
112-ton WC-62 G-507T-2236×6USM-BT-25/26(Personnel and) Cargo Carrier1943–194523,092125 in (3.18 m) [nb 18]214+78 in (5.46 m)82+34 in (2.10 m)8934 in /
8434 in [nb 19]
3,300 lb (1,500 kg)
112-ton WC-63 G-507T-2236×6USM-BT-23/24(Personnel and) Cargo Carrierw / winch1943–194520,132125 in (3.18 m) [nb 18]224+34 in (5.71 m)82+34 in (2.10 m)8934 in /
8434 in [nb 19]
3,300 lb (1,500 kg)
112-ton T-203B T-203-B4×4Lend-leaseCargo truck / Lend-Lease to Russia19401,500 [108]160 in (4.06 m)
112-ton WF-32 G-618T-1184×2Lend-lease;
made in Iran
Closed cab, stake and platform1942–19449,600 [42]160 in (4.06 m)253.5 in (6.44 m)88 in (2.24 m)82+1116 in (2.10 m)3,170 lb (1,440 kg)
12-ton D8A T-2124×4Canadian productionPick-up, open cab / Weapon Carrier3,001 [6]116 in (2.95 m)
34-ton D3/4 APT T-2364×4Canadian productionPick-up, open cab / Weapon Carrier; Air-Portablew / winch194511,750 [6]98 in (2.49 m)182 in (4.62 m)77+18 in (1.96 m)84 in (2.13 m) [nb 20]1,750 lb (790 kg)
Close

Service history

Although Chrysler / Dodge supplied over 380,000 WC-series to the war effort – more than the number of MB jeeps actually built by Willys (some 360,000), and the vehicles served with equal versatility – the Dodge WC-series, that were nicknamed "jeeps" by the soldiers, before that moniker subsequently migrated to its quarter-ton brothers, never received any comparable level of fame. The Dodge WC-series have therefore been called one of WW II's unsung heroes.[109][nb 21]

Lend-Lease

Almost 60,000 Dodge WC series models were provided to the U.S.' allies of World War II under the Lend-Lease program:[85]

  • 650 of the total 1,400 12-ton Panel vans built, possibly with radio, went to the British,
  • 886 34-ton Carry-alls went mainly to the British and the Soviets, with small numbers to various other countries,
  • over 2,500 of the total 3,500 WC-64, 34-ton knock-down ambulances went primarily to the Free French, the British, and to China,
  • some 3,800 34-ton WC-56 / WC-57 Command Cars (with or without winch) went mainly to the British, the Free French, and to China,
  • plus a further 650 34-ton Radio cars, likely WC-58 model, also for the British,
  • the bulk of lend-lease Dodges – over 44,000 units – were WC-51 and WC-52 34-ton Troops and Weapons Carriers – see their section above,
  • and lastly, 6,344 of WC-62 and WC-63 112-ton, 6x6 Cargo, Troops and Weapons Carriers were provided – mainly to the French (over 4,000), and to the British (over 2,000).

To the Soviets, the almost 25,000 new 1942 all-wheel drive 34-ton multi-purpose WC series were so fundamentally innovative, that they fitted no standard Red Army category. Russia much appreciated these vehicles, that perfectly filled the gap between 4WD automobiles and heavy trucks, and simply called them "Dodge three-quarters".[17]

Former operators

Dodge WC series vehicles are visible in many World War II movies, and American TV series. One of the most conspicuous examples is the frequent use of the WC-54 ambulances in the acclaimed M*A*S*H TV series, situated in the Korean War.

In many WW II films, directors would place high-ranking allied officers in Dodge Command Cars, although in reality, the German military quickly realized that personnel riding in the Command Cars were typically prime targets, and Allied generals and dignitaries would in reality prefer to ride in regular jeeps, to prevent advertising themselves as high-profile targets.

It also appears in Oppenheimer, in Los Alamos.

See also

Notes

  1. Chrysler Corporation Mopar's 1946 annual model chart and serial number guide indicates 4,640 12ton VC units, and a maximum of 77,765 12ton WC serial numbers: [3]
    – 31,935 units of the WC-1 through WC-11,
    – 17,293 units of the WC-12 through WC-20, and
    – 28,537 units of the WC-21 through WC-27 and WC-40 through WC-43
  2. The Summary Report – Tank-Automotive Materiel lists a total of 82,454 12ton 4×4 trucks (page 58), including 65 Marmon-Herrington Fords (p. 57) and 12 'Amphibian Car Corp.' units (p. 55), and a matching number of 4640 VC-series units (1940), leaving 82,377 half-ton, G-505 series, 4×4 units
  3. Contraction of "Big jeeps" [10]
  4. Although within the Chrysler Corporation, the Fargo Division often handled government contracts,[11] the trucks were all built at Dodge’s Mound Road, Warren truck plant near Detroit, Michigan.[5][12]
  5. Including the 4,640 G-505 VC trucks of 1940
  6. The U.S. Army in WW II grouped motor transport vehicles into four payload classes — 34ton or one-ton and under were "light" trucks; 112tons were "medium", and above that were two classes of "heavy" trucks.[5][13]
  7. When misunderstood, this leads for instance to the series being called "..the Dodge Weapons Carrier line of vehicles.."[16]
  8. With 'X' indicating their experimental status, as well as "X-4" denoting the addition of four-wheel drive as their experimental feature, and '(USA)' for a government/military contract
  9. Chrysler Corp. Mopar's 1946 annual model chart and serial number guide indicates 6,472 serial numbers across the VF-400 models,[7] exactly matching Dodge's contract W-398-QM-7471 for 3,936 units, and Fargo's contract W-398-QM-7813 for 2,534 units, plus one pilot truck each.[8] The 1946 Summary Report of Acceptances – Tank-Automotive Materiel lists another 292 cargo trucks in addition to these same numbers – but under earlier contracts, matching the 292 TF-40(-X) / T201 pre-standard units from 1939.[38]
  10. truck with bed-mounted gun, typically unarmored, except for possibly a gun shield
  11. (nominal off-road payload rating)
  12. Around 1939 / 1940, Dodge called their stepside pickups "express" – and so, in a number of early Army contracts for 1941 G505 trucks, the body-type was just specified as "express".
  13. U.S. government contracts explicitly referred to these units as T-211 models with a T-215 engine.[80]
  14. Based on the Ordnance Corps' SNL G-657 Dodge Master Parts List (1943), U.S. Army technical model manuals: the TM9-2800 (1943) and 1947 editions) and others, and the U.S. Summary Report of Tank Automotive Acceptances (1940–45).
  15. Ratings given in Technical Manual TM9-2800 editions of 1943 and 1947, respectively.[106] [107]
  16. According to both contract and acceptance count in Summary Report
  17. Unclear whether 2344 were built in addition to the WC-56/57 units, or whether this number of these were equipped as radio units !
  18. 104 in (2.64 m) + 42 in (1.07 m)
  19. TM9-810: max. height: tarpaulin up, with / without ringmount; Lowest operable reducible to 62 in (1.57 m)
  20. Max. height with tarpaulin up; lowest operable: 62 in (1.57 m)
  21. Anecdotally, contrary to the WW II 14ton jeeps, the Dodge WC-series was so unknown to German-speaking Wikipedia users, that prior to March 2021 no entry or article about any of the Dodge WC-series family of vehicles existed !

References

General references

Wikiwand in your browser!

Seamless Wikipedia browsing. On steroids.

Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.

Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.