Desalination
Removal of salts from water From Wikipedia, the free encyclopedia
Removal of salts from water From Wikipedia, the free encyclopedia
Desalination is a process that removes mineral components from saline water. More generally, desalination is the removal of salts and minerals from a substance.[1] One example is soil desalination. This is important for agriculture. It is possible to desalinate saltwater, especially sea water, to produce water for human consumption or irrigation. The by-product of the desalination process is brine.[2] Many seagoing ships and submarines use desalination. Modern interest in desalination mostly focuses on cost-effective provision of fresh water for human use. Along with recycled wastewater, it is one of the few water resources independent of rainfall.[3]
Due to its energy consumption, desalinating sea water is generally more costly than fresh water from surface water or groundwater, water recycling and water conservation; however, these alternatives are not always available and depletion of reserves is a critical problem worldwide.[4][5][6] Desalination processes are using either thermal methods (in the case of distillation) or membrane-based methods (e.g. in the case of reverse osmosis).[7][8]: 24
An estimate in 2018 found that "18,426 desalination plants are in operation in over 150 countries. They produce 87 million cubic meters of clean water each day and supply over 300 million people."[8]: 24 The energy intensity has improved: It is now about 3 kWh/m3 (in 2018), down by a factor of 10 from 20–30 kWh/m3 in 1970.[8]: 24 Nevertheless, desalination represented about 25% of the energy consumed by the water sector in 2016.[8]: 24
Ancient Greek philosopher Aristotle observed in his work Meteorology that "salt water, when it turns into vapour, becomes sweet and the vapour does not form salt water again when it condenses", and that a fine wax vessel would hold potable water after being submerged long enough in seawater, having acted as a membrane to filter the salt.[9]
At the same time the desalination of seawater was recorded in China. Both the Classic of Mountains and Water Seas in the Period of the Warring States and the Theory of the Same Year in the Eastern Han Dynasty mentioned that people found that the bamboo mats used for steaming rice would form a thin outer layer after long use. The as-formed thin film had adsorption and ion exchange functions, which could adsorb salt.[10]
Numerous examples of experimentation in desalination appeared throughout Antiquity and the Middle Ages,[11] but desalination became feasible on a large scale only in the modern era.[12] A good example of this experimentation comes from Leonardo da Vinci (Florence, 1452), who realized that distilled water could be made cheaply in large quantities by adapting a still to a cookstove.[13] During the Middle Ages elsewhere in Central Europe, work continued on distillation refinements, although not necessarily directed towards desalination.[14]
The first major land-based desalination plant may have been installed under emergency conditions on an island off the coast of Tunisia in 1560.[14][15] It is believed that a garrison of 700 Spanish soldiers was besieged by the Turkish army and that, during the siege, the captain in charge fabricated a still capable of producing 40 barrels of fresh water per day, though details of the device have not been reported.[15]
Before the Industrial Revolution, desalination was primarily of concern to oceangoing ships, which otherwise needed to keep on board supplies of fresh water. Sir Richard Hawkins (1562–1622), who made extensive travels in the South Seas, reported that he had been able to supply his men with fresh water by means of shipboard distillation.[16] Additionally, during the early 1600s, several prominent figures of the era such as Francis Bacon and Walter Raleigh published reports on desalination.[15][17] These reports and others,[18] set the climate for the first patent dispute concerning desalination apparatus. The two first patents regarding water desalination were approved in 1675 and 1683 (patents No. 184[19] and No. 226,[20] published by William Walcot and Robert Fitzgerald (and others), respectively). Nevertheless, neither of the two inventions entered service as a consequence of scale-up difficulties.[14] No significant improvements to the basic seawater distillation process were made during the 150 years from the mid-1600s until 1800.
When the frigate Protector was sold to Denmark in the 1780s (as the ship Hussaren) its still was studied and recorded in great detail.[21] In the United States, Thomas Jefferson catalogued heat-based methods going back to the 1500s, and formulated practical advice that was publicized to all U.S. ships on the reverse side of sailing clearance permits.[22][23]
Beginning about 1800, things started changing as a consequence of the appearance of the steam engine and the so-called age of steam.[14] Knowledge of the thermodynamics of steam processes[24] and the need for a pure water source for its use in boilers[25] generated a positive effect regarding distilling systems. Additionally, the spread of European colonialism induced a need for freshwater in remote parts of the world, thus creating the appropriate climate for water desalination.[14]
In parallel with the development and improvement of systems using steam (multiple-effect evaporators), these type of devices quickly demonstrated their desalination potential.[14] In 1852, Alphonse René le Mire de Normandy was issued a British patent for a vertical tube seawater distilling unit that, thanks to its simplicity of design and ease of construction, gained popularity for shipboard use.[14] Land-based units did not significantly appear until the latter half of the nineteenth century.[26] In the 1860s, the US Army purchased three Normandy evaporators, each rated at 7000 gallons/day and installed them on the islands of Key West and Dry Tortugas.[14][26][27] Another land-based plant was installed at Suakin during the 1880s that provided freshwater to the British troops there. It consisted of six-effect distillers with a capacity of 350 tons/day.[14][26]
After World War II, many technologies were developed or improved such as Multi Effect Flash desalination (MEF) and Multi Stage Flash desalination (MSF). Another notable technology is freeze-thaw desalination.[28] Freeze-thaw desalination, (cryo-desalination or FD), excludes dissolved minerals from saline water through crystallization.[29]
The Office of Saline Water was created in the United States Department of the Interior in 1955 in accordance with the Saline Water Conversion Act of 1952.[5][30] This act was motivated by a water shortage in California and inland western United States. The Department of the Interior allocated resources including research grants, expert personnel, patent data, and land for experiments to further advancements.[31]
The results of these efforts included the construction of over 200 electrodialysis and distillation plants globally, reverse osmosis (RO) research, and international cooperation (for example, the First International Water Desalination Symposium and Exposition in 1965).[32] The Office of Saline Water merged into the Office of Water Resources Research in 1974.[30]
The first industrial desalination plant in the United States opened in Freeport, Texas in 1961 after a decade of regional drought.[5]
By the late 1960s and the early 1970s, RO started to show promising results to replace traditional thermal desalination units. Research took place at state universities in California, at the Dow Chemical Company and DuPont.[33] Many studies focus on ways to optimize desalination systems.[34][35] The first commercial RO plant, the Coalinga desalination plant, was inaugurated in California in 1965 for brackish water.[36] Dr. Sidney Loeb, in conjunction with staff at UCLA, designed a large pilot plant to gather data on RO, but was successful enough to provide freshwater to the residents of Coalinga. This was a milestone in desalination technology, as it proved the feasibility of RO and its advantages compared to existing technologies (efficiency, no phase change required, ambient temperature operation, scalability, and ease of standardization).[37] A few years later, in 1975, the first sea water reverse osmosis desalination plant came into operation.
As of 2000, more than 2000 plants were operated. The largest are in Saudi Arabia, Israel, and the UAE; and the biggest plant with a volume of 1,401,000 m3/d is in Saudi Arabia (Ras Al Khair).[38]
As of 2021 22,000 plants were in operation[38] In 2024 the Catalan government installed a floating offshore plant near the port of Barcelona and purchased 12 mobile desalination units for the northern region of the Costa Brava to combat the severe drought.[39]
In 2012, cost averaged $0.75 per cubic meter. By 2022, that had declined (before inflation) to $0.41. Desalinated supplies are growing at a 10%+ compound rate, doubling in abundance every seven years.[40]
| External audio | |
|---|---|
| "Making the Deserts Bloom: Harnessing nature to deliver us from drought", Distillations Podcast and transcript, Episode 239, March 19, 2019, Science History Institute |
There are now about 21,000 desalination plants in operation around the globe. The biggest ones are in the United Arab Emirates, Saudi Arabia, and Israel. The world's largest desalination plant is located in Saudi Arabia (Ras Al-Khair Power and Desalination Plant) with a capacity of 1,401,000 cubic meters per day.[41]
Desalination is currently expensive compared to most alternative sources of water, and only a very small fraction of total human use is satisfied by desalination.[42] It is usually only economically practical for high-valued uses (such as household and industrial uses) in arid areas. However, there is growth in desalination for agricultural use and highly populated areas such as Singapore[43] or California.[44][45] The most extensive use is in the Persian Gulf.[46]
While noting costs are falling, and generally positive about the technology for affluent areas in proximity to oceans, a 2005 study argued, "Desalinated water may be a solution for some water-stress regions, but not for places that are poor, deep in the interior of a continent, or at high elevation. Unfortunately, that includes some of the places with the biggest water problems.", and, "Indeed, one needs to lift the water by 2000 m, or transport it over more than 1600 km to get transport costs equal to the desalination costs."[47]
Thus, it may be more economical to transport fresh water from somewhere else than to desalinate it. In places far from the sea, like New Delhi, or in high places, like Mexico City, transport costs could match desalination costs. Desalinated water is also expensive in places that are both somewhat far from the sea and somewhat high, such as Riyadh and Harare. By contrast in other locations transport costs are much less, such as Beijing, Bangkok, Zaragoza, Phoenix, and, of course, coastal cities like Tripoli.[48] After desalination at Jubail, Saudi Arabia, water is pumped 320 km inland to Riyadh.[49] For coastal cities, desalination is increasingly viewed as a competitive choice.
In 2023, Israel was using desalination to replenish the Sea of Galilee's water supply.[50]
Not everyone is convinced that desalination is or will be economically viable or environmentally sustainable for the foreseeable future. Debbie Cook wrote in 2011 that desalination plants can be energy intensive and costly. Therefore, water-stressed regions might do better to focus on conservation or other water supply solutions than invest in desalination plants.[51]
| Water desalination
|
|---|
| Methods |
|
Desalination is an artificial process by which saline water (generally sea water) is converted to fresh water. The most common desalination processes are distillation and reverse osmosis.[52]
There are several methods.[53] Each has advantages and disadvantages but all are useful. The methods can be divided into membrane-based (e.g., reverse osmosis) and thermal-based (e.g., multistage flash distillation) methods.[2] The traditional process of desalination is distillation (i.e., boiling and re-condensation of seawater to leave salt and impurities behind).[54]
There are currently two technologies with a large majority of the world's desalination capacity: multi-stage flash distillation and reverse osmosis.
Solar distillation mimics the natural water cycle, in which the sun heats sea water enough for evaporation to occur.[55] After evaporation, the water vapor is condensed onto a cool surface.[55] There are two types of solar desalination. The first type uses photovoltaic cells to convert solar energy to electrical energy to power desalination. The second type converts solar energy to heat, and is known as solar thermal powered desalination.
Water can evaporate through several other physical effects besides solar irradiation. These effects have been included in a multidisciplinary desalination methodology in the IBTS Greenhouse. The IBTS is an industrial desalination (power)plant on one side and a greenhouse operating with the natural water cycle (scaled down 1:10) on the other side. The various processes of evaporation and condensation are hosted in low-tech utilities, partly underground and the architectural shape of the building itself. This integrated biotectural system is most suitable for large scale desert greening as it has a km2 footprint for the water distillation and the same for landscape transformation in desert greening, respectively the regeneration of natural fresh water cycles.[citation needed]
In vacuum distillation atmospheric pressure is reduced, thus lowering the temperature required to evaporate the water. Liquids boil when the vapor pressure equals the ambient pressure and vapor pressure increases with temperature. Effectively, liquids boil at a lower temperature, when the ambient atmospheric pressure is less than usual atmospheric pressure. Thus, because of the reduced pressure, low-temperature "waste" heat from electrical power generation or industrial processes can be employed.
Water is evaporated and separated from sea water through multi-stage flash distillation, which is a series of flash evaporations.[55] Each subsequent flash process uses energy released from the condensation of the water vapor from the previous step.[55]
Multiple-effect distillation (MED) works through a series of steps called "effects".[55] Incoming water is sprayed onto pipes which are then heated to generate steam. The steam is then used to heat the next batch of incoming sea water.[55] To increase efficiency, the steam used to heat the sea water can be taken from nearby power plants.[55] Although this method is the most thermodynamically efficient among methods powered by heat,[56] a few limitations exist such as a max temperature and max number of effects.[57]
Vapor-compression evaporation involves using either a mechanical compressor or a jet stream to compress the vapor present above the liquid.[56] The compressed vapor is then used to provide the heat needed for the evaporation of the rest of the sea water.[55] Since this system only requires power, it is more cost effective if kept at a small scale.[55]
Membrane distillation uses a temperature difference across a membrane to evaporate vapor from a brine solution and condense pure water on the colder side.[58] The design of the membrane can have a significant effect on efficiency and durability. A study found that a membrane created via co-axial electrospinning of PVDF-HFP and silica aerogel was able to filter 99.99% of salt after continuous 30-day usage.[59]
The leading process for desalination in terms of installed capacity and yearly growth is reverse osmosis (RO).[61] The RO membrane processes use semipermeable membranes and applied pressure (on the membrane feed side) to preferentially induce water permeation through the membrane while rejecting salts. Reverse osmosis plant membrane systems typically use less energy than thermal desalination processes.[56] Energy cost in desalination processes varies considerably depending on water salinity, plant size and process type. At present the cost of seawater desalination, for example, is higher than traditional water sources, but it is expected that costs will continue to decrease with technology improvements that include, but are not limited to, improved efficiency,[62] reduction in plant footprint, improvements to plant operation and optimization, more effective feed pretreatment, and lower cost energy sources.[63]
Reverse osmosis uses a thin-film composite membrane, which comprises an ultra-thin, aromatic polyamide thin-film. This polyamide film gives the membrane its transport properties, whereas the remainder of the thin-film composite membrane provides mechanical support. The polyamide film is a dense, void-free polymer with a high surface area, allowing for its high water permeability.[64] A recent study has found that the water permeability is primarily governed by the internal nanoscale mass distribution of the polyamide active layer.[65]
The reverse osmosis process requires maintenance. Various factors interfere with efficiency: ionic contamination (calcium, magnesium etc.); dissolved organic carbon (DOC); bacteria; viruses; colloids and insoluble particulates; biofouling and scaling. In extreme cases, the RO membranes are destroyed. To mitigate damage, various pretreatment stages are introduced. Anti-scaling inhibitors include acids and other agents such as the organic polymers polyacrylamide and polymaleic acid, phosphonates and polyphosphates. Inhibitors for fouling are biocides (as oxidants against bacteria and viruses), such as chlorine, ozone, sodium or calcium hypochlorite. At regular intervals, depending on the membrane contamination; fluctuating seawater conditions; or when prompted by monitoring processes, the membranes need to be cleaned, known as emergency or shock-flushing. Flushing is done with inhibitors in a fresh water solution and the system must go offline. This procedure is environmentally risky, since contaminated water is diverted into the ocean without treatment. Sensitive marine habitats can be irreversibly damaged.[66][67]
Off-grid solar-powered desalination units use solar energy to fill a buffer tank on a hill with seawater.[68] The reverse osmosis process receives its pressurized seawater feed in non-sunlight hours by gravity, resulting in sustainable drinking water production without the need for fossil fuels, an electricity grid or batteries.[69][70][71] Nano-tubes are also used for the same function (i.e., Reverse Osmosis).
Forward osmosis uses a semi-permeable membrane to effect separation of water from dissolved solutes. The driving force for this separation is an osmotic pressure gradient, such as a "draw" solution of high concentration.[2]
Freeze–thaw desalination (or freezing desalination) uses freezing to remove fresh water from salt water. Salt water is sprayed during freezing conditions into a pad where an ice-pile builds up. When seasonal conditions warm, naturally desalinated melt water is recovered. This technique relies on extended periods of natural sub-freezing conditions.[72]
A different freeze–thaw method, not weather dependent and invented by Alexander Zarchin, freezes seawater in a vacuum. Under vacuum conditions the ice, desalinated, is melted and diverted for collection and the salt is collected.
Electrodialysis uses electric potential to move the salts through pairs of charged membranes, which trap salt in alternating channels.[73] Several variances of electrodialysis exist such as conventional electrodialysis, electrodialysis reversal.[2]
Electrodialysis can simultaneously remove salt and carbonic acid from seawater.[74] Preliminary estimates suggest that the cost of such carbon removal can be paid for in large part if not entirely from the sale of the desalinated water produced as a byproduct.[75]
Microbial desalination cells are biological electrochemical systems that implements the use of electro-active bacteria to power desalination of water in situ, resourcing the natural anode and cathode gradient of the electro-active bacteria and thus creating an internal supercapacitor.[4]
Wave powered desalination systems generally convert mechanical wave motion directly to hydraulic power for reverse osmosis.[76] Such systems aim to maximize efficiency and reduce costs by avoiding conversion to electricity, minimizing excess pressurization above the osmotic pressure, and innovating on hydraulic and wave power components.[77] One such approach is desalinating using submerged buoys, a wave power approach done by CETO[78] and Oneka.[79] Wave-powered desalination plants began operating by CETO on Garden Island in Western Australia in 2013[80] and in Perth in 2015,[81] and Oneka has installations in Chile, Florida, California, and the Caribbean.[79]
Wind energy can also be coupled to desalination. Similar to wave power, a direct conversion of mechanical energy to hydraulic power can reduce components and losses in powering reverse osmosis.[82] Wind power has also been considered for coupling with thermal desalination technologies.[83]
In April 2024, researchers from the Australian National University published experimental results of a novel technique for desalination. This technique, thermodiffusive desalination, passes saline water through a channel that is exposed to a temperature gradient. Due to thermophoresis, species migrate under this temperature gradient, orthogonal to the fluid flow. Researchers then separated the water into fractions. After multiple passes through the channel, the researchers were able to achieve a NaCl concentration drop of 25000 ppm with a recovery rate of 10% of the original water volume.[84]
The desalination process's energy consumption depends on the water's salinity. Brackish water desalination requires less energy than seawater desalination.[85]
The energy intensity of seawater desalination has improved: It is now about 3 kWh/m3 (in 2018), down by a factor of 10 from 20-30 kWh/m3 in 1970.[8]: 24 This is similar to the energy consumption of other freshwater supplies transported over large distances,[86] but much higher than local fresh water supplies that use 0.2 kWh/m3 or less.[87]
A minimum energy consumption for seawater desalination of around 1 kWh/m3 has been determined,[85][88][89] excluding prefiltering and intake/outfall pumping. Under 2 kWh/m3[90] has been achieved with reverse osmosis membrane technology, leaving limited scope for further energy reductions as the reverse osmosis energy consumption in the 1970s was 16 kWh/m3.[85]
Supplying all US domestic water by desalination would increase domestic energy consumption by around 10%, about the amount of energy used by domestic refrigerators.[91] Domestic consumption is a relatively small fraction of the total water usage.[92]
| Desalination Method ⇨ | Multi-stage Flash "MSF" |
Multi-Effect Distillation "MED" |
Mechanical Vapor Compression "MVC" |
Reverse Osmosis "RO" |
|---|---|---|---|---|
| Energy ⇩ | ||||
| Electrical energy | 4–6 | 1.5–2.5 | 7–12 | 3–5.5 |
| Thermal energy | 50–110 | 60–110 | none | none |
| Electrical equivalent of thermal energy | 9.5–19.5 | 5–8.5 | none | none |
| Total equivalent electrical energy | 13.5–25.5 | 6.5–11 | 7–12 | 3–5.5 |
Note: "Electrical equivalent" refers to the amount of electrical energy that could be generated using a given quantity of thermal energy and an appropriate turbine generator. These calculations do not include the energy required to construct or refurbish items consumed.
Given the energy-intensive nature of desalination and the associated economic and environmental costs, desalination is generally considered a last resort after water conservation. But this is changing as prices continue to fall.
Cogeneration is generating useful heat energy and electricity from a single process. Cogeneration can provide usable heat for desalination in an integrated, or "dual-purpose", facility where a power plant provides the energy for desalination. Alternatively, the facility's energy production may be dedicated to the production of potable water (a stand-alone facility), or excess energy may be produced and incorporated into the energy grid. Cogeneration takes various forms, and theoretically any form of energy production could be used. However, the majority of current and planned cogeneration desalination plants use either fossil fuels or nuclear power as their source of energy. Most plants are located in the Middle East or North Africa, which use their petroleum resources to offset limited water resources. The advantage of dual-purpose facilities is they can be more efficient in energy consumption, thus making desalination more viable.[94][95]
The current trend in dual-purpose facilities is hybrid configurations, in which the permeate from reverse osmosis desalination is mixed with distillate from thermal desalination. Basically, two or more desalination processes are combined along with power production. Such facilities have been implemented in Saudi Arabia at Jeddah and Yanbu.[96]
A typical supercarrier in the US military is capable of using nuclear power to desalinate 1,500,000 L (330,000 imp gal; 400,000 US gal) of water per day.[97]
Increased water conservation and efficiency remain the most cost-effective approaches in areas with a large potential to improve the efficiency of water use practices.[98] Wastewater reclamation provides multiple benefits over desalination of saline water,[99] although it typically uses desalination membranes.[100] Urban runoff and storm water capture also provide benefits in treating, restoring and recharging groundwater.[101]
A proposed alternative to desalination in the American Southwest is the commercial importation of bulk water from water-rich areas either by oil tankers converted to water carriers, or pipelines. The idea is politically unpopular in Canada, where governments imposed trade barriers to bulk water exports as a result of a North American Free Trade Agreement (NAFTA) claim.[102]
The California Department of Water Resources and the California State Water Resources Control Board submitted a report to the state legislature recommending that urban water suppliers achieve an indoor water use efficiency standard of 55 US gallons (210 litres) per capita per day by 2023, declining to 47 US gallons (180 litres) per day by 2025, and 42 US gallons (160 litres) by 2030 and beyond.[103][104][105]
Factors that determine the costs for desalination include capacity and type of facility, location, feed water, labor, energy, financing, and concentrate disposal. Costs of desalinating sea water (infrastructure, energy, and maintenance) are generally higher than fresh water from rivers or groundwater, water recycling, and water conservation, but alternatives are only sometimes available. Desalination costs in 2013 ranged from US$0.45 to US$1.00/m3. More than half of the cost comes directly from energy costs, and since energy prices are very volatile, actual costs can vary substantially.[106]
The cost of untreated fresh water in the developing world can reach US$5/cubic metre.[107]
Since 1975, desalination technology has seen significant advancements, decreasing the average cost of producing one cubic meter of freshwater from seawater from $1.10 in 2000 to approximately $0.50 today. Improved desalination efficiency is a primary factor contributing to this reduction. Energy consumption remains a significant cost component, accounting for up to half the total cost of the desalination process.[108]
Desalination can substantially increase energy intensity, particularly for regions with limited energy resources. For instance, in the island nation of Cyprus, desalination accounts for approximately 5% of the country's total power consumption.[108]
The global desalination market was valued at $20 billion in 2023. With growing populations in arid coastal regions, this market is projected to double by 2032. In 2023, global desalination capacity reached 99 million cubic meters per day, a significant increase from 27 million cubic meters per day in 2003.[108]
| Method | Cost (US$/liter) |
|---|---|
| Passive solar (30.42% energy efficient)[109] | 0.034 |
| Passive solar (improved single-slope, India)[109] | 0.024 |
| Passive solar (improved double slope, India)[109] | 0.007 |
| Multi Stage Flash (MSF)[110] | < 0.001 |
| Reverse Osmosis (Concentrated solar power)[111] | 0.0008 |
| Reverse Osmosis (Photovoltaic power)[112] | 0.000825 |
| Area | Consumption Litre/person/day | Desalinated Water Cost US$/person/day |
|---|---|---|
| US | 378 | 0.38 |
| Europe | 189 | 0.19 |
| Africa | 57 | 0.06 |
| UN recommended minimum | 49 | 0.05 |
Desalination stills control pressure, temperature and brine concentrations to optimize efficiency. Nuclear-powered desalination might be economical on a large scale.[113][114]
In 2014, the Israeli facilities of Hadera, Palmahim, Ashkelon, and Sorek were desalinizing water for less than US$0.40 per cubic meter.[115] As of 2006, Singapore was desalinating water for US$0.49 per cubic meter.[116]
In the United States, cooling water intake structures are regulated by the Environmental Protection Agency (EPA). These structures can have the same impacts on the environment as desalination facility intakes. According to EPA, water intake structures cause adverse environmental impact by sucking fish and shellfish or their eggs into an industrial system. There, the organisms may be killed or injured by heat, physical stress, or chemicals. Larger organisms may be killed or injured when they become trapped against screens at the front of an intake structure.[117] Alternative intake types that mitigate these impacts include beach wells, but they require more energy and higher costs.[118]
The Kwinana Desalination Plant opened in the Australian city of Perth, in 2007. Water there and at Queensland's Gold Coast Desalination Plant and Sydney's Kurnell Desalination Plant is withdrawn at 0.1 m/s (0.33 ft/s), which is slow enough to let fish escape. The plant provides nearly 140,000 m3 (4,900,000 cu ft) of clean water per day.[119]
 | This section needs additional citations for verification. (January 2012) |
Desalination processes produce large quantities of brine, possibly at above ambient temperature, and contain residues of pretreatment and cleaning chemicals, their reaction byproducts and heavy metals due to corrosion (especially in thermal-based plants).[120][121] Chemical pretreatment and cleaning are a necessity in most desalination plants, which typically includes prevention of biofouling, scaling, foaming and corrosion in thermal plants, and of biofouling, suspended solids and scale deposits in membrane plants.[122]
To limit the environmental impact of returning the brine to the ocean, it can be diluted with another stream of water entering the ocean, such as the outfall of a wastewater treatment or power plant. With medium to large power plant and desalination plants, the power plant's cooling water flow is likely to be several times larger than that of the desalination plant, reducing the salinity of the combination. Another method to dilute the brine is to mix it via a diffuser in a mixing zone. For example, once a pipeline containing the brine reaches the sea floor, it can split into many branches, each releasing brine gradually through small holes along its length. Mixing can be combined with power plant or wastewater plant dilution. Furthermore, zero liquid discharge systems can be adopted to treat brine before disposal.[120][123]
Another possibility is making the desalination plant movable, thus avoiding that the brine builds up into a single location (as it keeps being produced by the desalination plant). Some such movable (ship-connected) desalination plants have been constructed.[124][125]
Brine is denser than seawater and therefore sinks to the ocean bottom and can damage the ecosystem. Brine plumes have been seen to diminish over time to a diluted concentration, to where there was little to no effect on the surrounding environment. However studies have shown the dilution can be misleading due to the depth at which it occurred. If the dilution was observed during the summer season, there is possibility that there could have been a seasonal thermocline event that could have prevented the concentrated brine to sink to sea floor. This has the potential to not disrupt the sea floor ecosystem and instead the waters above it. Brine dispersal from the desalination plants has been seen to travel several kilometers away, meaning that it has the potential to cause harm to ecosystems far away from the plants. Careful reintroduction with appropriate measures and environmental studies can minimize this problem.[126][127]
The energy demand for desalination in the Middle East, driven by severe water scarcity, is expected to double by 2030. Currently, this process primarily uses fossil fuels, comprising over 95% of its energy source. In 2023, desalination consumed nearly half of the residential sector's energy in the region.[128]
Due to the nature of the process, there is a need to place the plants on approximately 25 acres of land on or near the shoreline.[129] In the case of a plant built inland, pipes have to be laid into the ground to allow for easy intake and outtake.[129] However, once the pipes are laid into the ground, they have a possibility of leaking into and contaminating nearby aquifers.[129] Aside from environmental risks, the noise generated by certain types of desalination plants can be loud.[129]
Desalination removes iodine from water and could increase the risk of iodine deficiency disorders. Israeli researchers claimed a possible link between seawater desalination and iodine deficiency,[130] finding iodine deficits among adults exposed to iodine-poor water[131] concurrently with an increasing proportion of their area's drinking water from seawater reverse osmosis (SWRO).[132] They later found probable iodine deficiency disorders in a population reliant on desalinated seawater.[133] A possible link of heavy desalinated water use and national iodine deficiency was suggested by Israeli researchers.[134] They found a high burden of iodine deficiency in the general population of Israel: 62% of school-age children and 85% of pregnant women fall below the WHO's adequacy range.[135] They also pointed out the national reliance on iodine-depleted desalinated water, the absence of a universal salt iodization program and reports of increased use of thyroid medication in Israel as a possible reasons that the population's iodine intake is low.[136] In the year that the survey was conducted, the amount of water produced from the desalination plants constitutes about 50% of the quantity of fresh water supplied for all needs and about 80% of the water supplied for domestic and industrial needs in Israel.[137]
Other desalination techniques include:
Thermally-driven desalination technologies are frequently suggested for use with low-temperature waste heat sources, as the low temperatures are not useful for process heat needed in many industrial processes, but ideal for the lower temperatures needed for desalination.[56] In fact, such pairing with waste heat can even improve electrical process: Diesel generators commonly provide electricity in remote areas. About 40–50% of the energy output is low-grade heat that leaves the engine via the exhaust. Connecting a thermal desalination technology such as membrane distillation system to the diesel engine exhaust repurposes this low-grade heat for desalination. The system actively cools the diesel generator, improving its efficiency and increasing its electricity output. This results in an energy-neutral desalination solution. An example plant was commissioned by Dutch company Aquaver in March 2014 for Gulhi, Maldives.[138][139]
Originally stemming from ocean thermal energy conversion research, low-temperature thermal desalination (LTTD) takes advantage of water boiling at low pressure, even at ambient temperature. The system uses pumps to create a low-pressure, low-temperature environment in which water boils at a temperature gradient of 8–10 °C (14–18 °F) between two volumes of water. Cool ocean water is supplied from depths of up to 600 m (2,000 ft). This water is pumped through coils to condense the water vapor. The resulting condensate is purified water. LTTD may take advantage of the temperature gradient available at power plants, where large quantities of warm wastewater are discharged from the plant, reducing the energy input needed to create a temperature gradient.[140]
Experiments were conducted in the US and Japan to test the approach. In Japan, a spray-flash evaporation system was tested by Saga University.[141] In Hawaii, the National Energy Laboratory tested an open-cycle OTEC plant with fresh water and power production using a temperature difference of 20 °C (36 °F) between surface water and water at a depth of around 500 m (1,600 ft). LTTD was studied by India's National Institute of Ocean Technology (NIOT) in 2004. Their first LTTD plant opened in 2005 at Kavaratti in the Lakshadweep islands. The plant's capacity is 100,000 L (22,000 imp gal; 26,000 US gal)/day, at a capital cost of INR 50 million (€922,000). The plant uses deep water at a temperature of 10 to 12 °C (50 to 54 °F).[142] In 2007, NIOT opened an experimental, floating LTTD plant off the coast of Chennai, with a capacity of 1,000,000 L (220,000 imp gal; 260,000 US gal)/day. A smaller plant was established in 2009 at the North Chennai Thermal Power Station to prove the LTTD application where power plant cooling water is available.[140][143][144]
In October 2009, Saltworks Technologies announced a process that uses solar or other thermal heat to drive an ionic current that removes all sodium and chlorine ions from the water using ion-exchange membranes.[145]
The Seawater greenhouse uses natural evaporation and condensation processes inside a greenhouse powered by solar energy to grow crops in arid coastal land.
In 2022, using a technique that used multiple stages of ion concentration polarisation followed by a single stage of electrodialysis, researchers from MIT manage to create a filterless portable desalination unit, capable of removing both dissolved salts and suspended solids.[146] Designed for use by non-experts in remote areas or natural disasters, as well as on military operations, the prototype is the size of a suitcase, measuring 42 × 33.5 × 19 cm3 and weighing 9.25 kg.[146] The process is fully automated, notifying the user when the water is safe to drink, and can be controlled by a single button or smartphone app. As it does not require a high pressure pump the process is highly energy efficient, consuming only 20 watt-hours per liter of drinking water produced, making it capable of being powered by common portable solar panels. Using a filterless design at low pressures or replaceable filters significantly reduces maintenance requirements, while the device itself is self cleaning.[147] However, the device is limited to producing 0.33 liters of drinking water per minute.[146] There are also concerns that fouling will impact the long-term reliability, especially in water with high turbidity. The researchers are working to increase the efficiency and production rate with the intent to commercialise the product in the future, however a significant limitation is the reliance on expensive materials in the current design.[147]
Adsorption-based desalination (AD) relies on the moisture absorption properties of certain materials such as Silica Gel.[148]
One process was commercialized by Modern Water PLC using forward osmosis, with a number of plants reported to be in operation.[149][150][151]
The idea of the method is in the fact that when the hydrogel is put into contact with aqueous salt solution, it swells absorbing a solution with the ion composition different from the original one. This solution can be easily squeezed out from the gel by means of sieve or microfiltration membrane. The compression of the gel in closed system lead to change in salt concentration, whereas the compression in open system, while the gel is exchanging ions with bulk, lead to the change in the number of ions. The consequence of the compression and swelling in open and closed system conditions mimics the reverse Carnot Cycle of refrigerator machine. The only difference is that instead of heat this cycle transfers salt ions from the bulk of low salinity to a bulk of high salinity. Similarly to the Carnot cycle this cycle is fully reversible, so can in principle work with an ideal thermodynamic efficiency. Because the method is free from the use of osmotic membranes it can compete with reverse osmosis method. In addition, unlike the reverse osmosis, the approach is not sensitive to the quality of feed water and its seasonal changes, and allows the production of water of any desired concentration.[152]
The United States, France and the United Arab Emirates are working to develop practical solar desalination.[153] AquaDania's WaterStillar has been installed at Dahab, Egypt, and in Playa del Carmen, Mexico. In this approach, a solar thermal collector measuring two square metres can distill from 40 to 60 litres per day from any local water source – five times more than conventional stills. It eliminates the need for plastic PET bottles or energy-consuming water transport.[154] In Central California, a startup company WaterFX is developing a solar-powered method of desalination that can enable the use of local water, including runoff water that can be treated and used again. Salty groundwater in the region would be treated to become freshwater, and in areas near the ocean, seawater could be treated.[155]
The Passarell process uses reduced atmospheric pressure rather than heat to drive evaporative desalination. The pure water vapor generated by distillation is then compressed and condensed using an advanced compressor. The compression process improves distillation efficiency by creating the reduced pressure in the evaporation chamber. The compressor centrifuges the pure water vapor after it is drawn through a demister (removing residual impurities) causing it to compress against tubes in the collection chamber. The compression of the vapor increases its temperature. The heat is transferred to the input water falling in the tubes, vaporizing the water in the tubes. Water vapor condenses on the outside of the tubes as product water. By combining several physical processes, Passarell enables most of the system's energy to be recycled through its evaporation, demisting, vapor compression, condensation, and water movement processes.[156]
Geothermal energy can drive desalination. In most locations, geothermal desalination beats using scarce groundwater or surface water, environmentally and economically.[citation needed]
Nanotube membranes of higher permeability than current generation of membranes may lead to eventual reduction in the footprint of RO desalination plants. It has also been suggested that the use of such membranes will lead to reduction in the energy needed for desalination.[157]
Hermetic, sulphonated nano-composite membranes have shown to be capable of removing various contaminants to the parts per billion level, and have little or no susceptibility to high salt concentration levels.[158][159][160]
Biomimetic membranes are another approach.[161]
In 2008, Siemens Water Technologies announced technology that applied electric fields to desalinate one cubic meter of water while using only a purported 1.5 kWh of energy. If accurate, this process would consume one-half the energy of other processes.[162] As of 2012 a demonstration plant was operating in Singapore.[163] Researchers at the University of Texas at Austin and the University of Marburg are developing more efficient methods of electrochemically mediated seawater desalination.[164]
A process employing electrokinetic shock waves can be used to accomplish membraneless desalination at ambient temperature and pressure.[165] In this process, anions and cations in salt water are exchanged for carbonate anions and calcium cations, respectively using electrokinetic shockwaves. Calcium and carbonate ions react to form calcium carbonate, which precipitates, leaving fresh water. The theoretical energy efficiency of this method is on par with electrodialysis and reverse osmosis.
Temperature Swing Solvent Extraction (TSSE) uses a solvent instead of a membrane or high temperatures.
Solvent extraction is a common technique in chemical engineering. It can be activated by low-grade heat (less than 70 °C (158 °F), which may not require active heating. In a study, TSSE removed up to 98.4 percent of the salt in brine.[166] A solvent whose solubility varies with temperature is added to saltwater. At room temperature the solvent draws water molecules away from the salt. The water-laden solvent is then heated, causing the solvent to release the now salt-free water.[167]
It can desalinate extremely salty brine up to seven times as salty as the ocean. For comparison, the current methods can only handle brine twice as salty.
A small-scale offshore system uses wave energy to desalinate 30–50 m3/day. The system operates with no external power, and is constructed of recycled plastic bottles.[168]
Trade Arabia claims Saudi Arabia to be producing 7.9 million cubic meters of desalinated water daily, or 22% of world total as of 2021 yearend.[169]
As new technological innovations continue to reduce the capital cost of desalination, more countries are building desalination plants as a small element in addressing their water scarcity problems.[177]
As of 2008, "World-wide, 13,080 desalination plants produce more than 12 billion gallons of water a day, according to the International Desalination Association."[191] An estimate in 2009 found that the worldwide desalinated water supply will triple between 2008 and 2020.[192]
One of the world's largest desalination hubs is the Jebel Ali Power Generation and Water Production Complex in the United Arab Emirates. It is a site featuring multiple plants using different desalination technologies and is capable of producing 2.2 million cubic meters of water per day.[193]
A typical aircraft carrier in the U.S. military uses nuclear power to desalinize 400,000 US gallons (1,500,000 L) of water per day.[194]
Evaporation of water over the oceans in the water cycle is a natural desalination process.
The formation of sea ice produces ice with little salt, much lower than in seawater.
Seabirds distill seawater using countercurrent exchange in a gland with a rete mirabile. The gland secretes highly concentrated brine stored near the nostrils above the beak. The bird then "sneezes" the brine out. As freshwater is not usually available in their environments, some seabirds, such as pelicans, petrels, albatrosses, gulls and terns, possess this gland, which allows them to drink the salty water from their environments while they are far from land.[195][196]
Mangrove trees grow in seawater; they secrete salt by trapping it in parts of the root, which are then eaten by animals (usually crabs). Additional salt is removed by storing it in leaves that fall off. Some types of mangroves have glands on their leaves, which work in a similar way to the seabird desalination gland. Salt is extracted to the leaf exterior as small crystals, which then fall off the leaf.
Willow trees and reeds absorb salt and other contaminants, effectively desalinating the water. This is used in artificial constructed wetlands, for treating sewage.[197]
Despite the issues associated with desalination processes, public support for its development can be very high.[198][199] One survey of a Southern California community saw 71.9% of all respondents being in support of desalination plant development in their community.[199] In many cases, high freshwater scarcity corresponds to higher public support for desalination development whereas areas with low water scarcity tend to have less public support for its development.[199]
Seamless Wikipedia browsing. On steroids.
