Remove ads
A craton ( /ˈkreɪtɒn/ KRAYT-on, /ˈkrætɒn/ KRAT-on, or /ˈkreɪtən/ KRAY-tən;[1][2][3] from Ancient Greek: κράτος kratos "strength") is an old and stable part of the continental lithosphere, which consists of Earth's two topmost layers, the crust and the uppermost mantle. Having often survived cycles of merging and rifting of continents, cratons are generally found in the interiors of tectonic plates; the exceptions occur where geologically recent rifting events have separated cratons and created passive margins along their edges. Cratons are characteristically composed of ancient crystalline basement rock, which may be covered by younger sedimentary rock. They have a thick crust and deep lithospheric roots that extend as much as several hundred kilometres into Earth's mantle.
Remove ads
The term craton is used to distinguish the stable portion of the continental crust from regions that are more geologically active and unstable.[4] Cratons are composed of two layers: a continental shield, in which the basement rock crops out at the surface,[5] and a platform which overlays the shield in some areas with sedimentary rock.[6]
The word craton was first proposed by the Austrian geologist Leopold Kober in 1921 as Kratogen, referring to stable continental platforms, and orogen as a term for mountain or orogenic belts. Later Hans Stille shortened the former term to Kraton, from which craton derives.[7]
Remove ads
Examples of cratons are the Dharwar Craton[8] in India, North China Craton,[9] the East European Craton,[10] the Amazonian Craton in South America,[11] the Kaapvaal Craton in South Africa,[12] the North American Craton (also called the Laurentia Craton),[13] and the Gawler Craton in South Australia.[14]
Cratons have thick lithospheric roots. Mantle tomography shows that cratons are underlain by anomalously cold mantle corresponding to lithosphere more than twice the typical 100 km (60 mi) thickness of mature oceanic or non-cratonic, continental lithosphere. At that depth, craton roots extend into the asthenosphere,[15] and the low-velocity zone seen elsewhere at these depths is weak or absent beneath stable cratons.[16] Craton lithosphere is distinctly different from oceanic lithosphere because cratons have a neutral or positive buoyancy and a low intrinsic density. This low density offsets density increases from geothermal contraction and prevents the craton from sinking into the deep mantle. Cratonic lithosphere is much older than oceanic lithosphere—up to 4 billion years versus 180 million years.[17]
Rock fragments (xenoliths) carried up from the mantle by magmas containing peridotite have been delivered to the surface as inclusions in subvolcanic pipes called kimberlites. These inclusions have densities consistent with craton composition and are composed of mantle material residual from high degrees of partial melt. Peridotite is strongly influenced by the inclusion of moisture. Craton peridotite moisture content is unusually low, which leads to much greater strength. It also contains high percentages of low-weight magnesium instead of higher-weight calcium and iron.[18] Peridotites are important for understanding the deep composition and origin of cratons because peridotite nodules are pieces of mantle rock modified by partial melting. Harzburgite peridotites represent the crystalline residues after extraction of melts of compositions like basalt and komatiite.[19]
Remove ads
The process by which cratons were formed is called cratonization. There is much about this process that remains uncertain, with very little consensus in the scientific community.[20] However, the first cratonic landmasses likely formed during the Archean eon. This is indicated by the age of diamonds, which originate in the roots of cratons, and which are almost always over 2 billion years and often over 3 billion years in age.[17] Rock of Archean age makes up only 7% of the world's current cratons; even allowing for erosion and destruction of past formations, this suggests that only 5 to 40 percent of the present continental crust formed during the Archean.[21] Cratonization likely was completed during the Proterozoic. Subsequent growth of continents was by accretion at continental margins.[17]
Root origin
The origin of the roots of cratons is still debated.[22][23][18][20] However, the present understanding of cratonization began with the publication in 1978 of a paper by Thomas H. Jordan in Nature. Jordan proposes that cratons formed from a high degree of partial melting of the upper mantle, with 30 to 40 percent of the source rock entering the melt. Such a high degree of melting was possible because of the high mantle temperatures of the Archean. The extraction of so much magma left behind a solid peridotite residue that was enriched in lightweight magnesium and thus lower in chemical density than undepleted mantle. This lower chemical density compensated for the effects of thermal contraction as the craton and its roots cooled, so that the physical density of the cratonic roots matched that of the surrounding hotter, but more chemically dense, mantle.[24][17] In addition to cooling the craton roots and lowering their chemical density, the extraction of magma also increased the viscosity and melting temperature of the craton roots and prevented mixing with the surrounding undepleted mantle.[25] The resulting mantle roots have remained stable for billions of years.[23] Jordan suggests that depletion occurred primarily in subduction zones and secondarily as flood basalts.[26]
This model of melt extraction from the upper mantle has held up well with subsequent observations.[27] The properties of mantle xenoliths confirm that the geothermal gradient is much lower beneath continents than oceans.[28] The olivine of craton root xenoliths is extremely dry, which would give the roots a very high viscosity.[29] Rhenium–osmium dating of xenoliths indicates that the oldest melting events took place in the early to middle Archean. Significant cratonization continued into the late Archean, accompanied by voluminous mafic magmatism.[30]
However, melt extraction alone cannot explain all the properties of craton roots. Jordan notes in his paper that this mechanism could be effective for constructing craton roots only down to a depth of 200 kilometers (120 mi). The great depths of craton roots required further explanation.[26] The 30 to 40 percent partial melting of mantle rock at 4 to 10 GPa pressure produces komatiite magma and a solid residue very close in composition to Archean lithospheric mantle, but continental shields do not contain enough komatiite to match the expected depletion. Either much of the komatiite never reached the surface, or other processes aided craton root formation.[30] There are many competing hypotheses of how cratons have been formed.
Repeated continental collision model
Jordan's model suggests that further cratonization was a result of repeated continental collisions. The thickening of the crust associated with these collisions may have been balanced by craton root thickening according to the principle of isostacy.[26] Jordan likens this model to "kneading" of the cratons, allowing low density material to move up and higher density to move down, creating stable cratonic roots as deep as 400 km (250 mi).[29]
Molten plume model
A second model suggests that the surface crust was thickened by a rising plume of molten material from the deep mantle. This would have built up a thick layer of depleted mantle underneath the cratons.
Subducting ocean slab model
A third model suggests that successive slabs of subducting oceanic lithosphere became lodged beneath a proto-craton, underplating the craton with chemically depleted rock.[29][18][22]
Impact origin model
A fourth theory presented in a 2015 publication suggests that the origin of the cratons is similar to crustal plateaus observed on Venus, which may have been created by large asteroid impacts.[20] In this model, large impacts on the Earth's early lithosphere penetrated deep into the mantle and created enormous lava ponds.[20] The paper suggests these lava ponds cooled to form the craton's root.[20]
Evidence for each model
The chemistry of xenoliths[27] and seismic tomography both favor the two accretional models over the plume model.[29][31] However, other geochemical evidence favors mantle plumes.[32][33][34] Tomography shows two layers in the craton roots beneath North America. One is found at depths shallower than 150 km (93 mi) and may be Archean, while the second is found at depths from 180 to 240 km (110 to 150 mi) and may be younger. The second layer may be a less depleted thermal boundary layer that stagnated against the depleted "lid" formed by the first layer.[35] The impact origin model does not require plumes or accretion; this model is, however, not incompatible with either.[20]
All these proposed mechanisms rely on buoyant, viscous material separating from a denser residue due to mantle flow, and it is possible that more than one mechanism contributed to craton root formation.[30][20]
Remove ads
The long-term erosion of cratons has been labelled the "cratonic regime". It involves processes of pediplanation and etchplanation that lead to the formation of flattish surfaces known as peneplains.[36] While the process of etchplanation is associated to humid climate and pediplanation with arid and semi-arid climate, shifting climate over geological time leads to the formation of so-called polygenetic peneplains of mixed origin. Another result of the longevity of cratons is that they may alternate between periods of high and low relative sea levels. High relative sea level leads to increased oceanicity, while the opposite leads to increased inland conditions.[36]
Many cratons have had subdued topographies since Precambrian times. For example, the Yilgarn Craton of Western Australia was flattish already by Middle Proterozoic times[36] and the Baltic Shield had been eroded into a subdued terrain already during the Late Mesoproterozoic when the rapakivi granites intruded.[37][38]
Remove ads
Wikiwand in your browser!
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.
Remove ads