Burr Truss

The Burr Arch Truss—or, simply, Burr Truss or Burr Arch—is a combination of an arch and a multiple kingpost truss design. It was invented in 1804 by Theodore Burr,^[1] patented on April 3, 1817,^[2] and used in bridges, usually covered bridges.^[3][4]

Burr bridge

Interior structure of a covered bridge utilizing a kingpost with a Burr Arch structure
Ancestor	Truss bridge, kingpost bridge
Related	None
Descendant	None
Carries	Pedestrians, livestock, vehicles
Span range	Short to medium
Material	Wood planks
Movable	No
Design effort	medium

Design

The design principle behind the Burr arch truss is that the arch should be capable of bearing the entire load on the bridge while the truss keeps the bridge rigid. Even though the kingpost truss alone is capable of bearing a load, this was done because it is impossible to evenly balance a dynamic load crossing the bridge between the two parts.^[5] The opposite view is also held, based on computer models, that the truss performs the majority of the load bearing and the arch provides the stability.^[1] Either way, the combination of the arch and the truss provides a more stable bridge capable of supporting greater weight than either the arch or truss alone.

Example of a Burr Truss – Baumgardener's Covered Bridge in Lancaster County, Pennsylvania, U.S.

The U.S. state of Indiana has a large collection of Burr Truss bridges. Of its 92 extant bridges, 53 are Burr Trusses, many of which reside in Parke County.

• 
  Sim Smith Covered Bridge, Parke County, Indiana. Notice the arch projects below the lower chords of the bridge.
• 
  Mansfield Covered Bridge, Parke County, Indiana. The roof was missing after a major storm and the interior design was easier to see.
• 
  Mansfield Covered Bridge. Spans could be added to extend the bridge further than bridges of similar design.
• 
  Medora Covered Bridge, Jackson County, Indiana. This is the longest covered bridge in Indiana.

Design specification

Deer Mills Covered Bridge, Montgomery County, Indiana

References

1. "The Burr Truss". Truss Styles of Covered Bridges. New York State Covered Bridge Society. January 2006. Archived from the original on September 8, 2006. Retrieved September 15, 2006.
2. "Publication Number: X0002769". Publication Images. United States Patent and Trademark Office. Retrieved September 15, 2006.
3. "Truss Types". Covered Bridge Truss Types. Ohio Department of Transportation Office of Structural Engineering. Archived from the original on September 4, 2006. Retrieved September 15, 2006.
4. "Truss Types". The Theodore Burr Covered Bridge Society of PA, Inc. Retrieved July 28, 2006.
5. Calvert, J. B. (October 23, 2000). "The Burr Truss". Archived from the original on August 3, 2006. Retrieved July 28, 2006.

External links

• Cummings, Hubertis M. "Theodore Burr and his bridges across the Susquehanna". Retrieved July 28, 2006.
• Historic American Engineering Record (HAER) No. OH-138, "Strength of Burr-Arch Trusses", 108 data pages